Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.8 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹42.8 L+₹2.4 L (5.90%)Rejected-Finance | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹45.8 L+₹5.4 L (13.3%)Rejected-Finance BUNGLOW 19 THE MALL KAMPTEE CANTT | KAMPTEE CANTT | NAGPUR | MAHARASHTRA | 441001 | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹46.2 L+₹5.8 L (14.2%)Rejected-Finance | L4 | Rejected-Finance Not Lowest |
Tender Value
₹43.5 L
EMD Value
₹86,960
Closing Date
11 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Kamptee
Garrison Engineer Cantt Area Kamptee 441001
SPECIAL REPAIRS TO BLOCK NO 201 OR MD ACC AT ARGUM LINE, NCC, OTA AND PROVN OF 01 X SCOOTER PARK AT HQ COPY NEAR BLDG NO T-10, T-11 AT APS WING GRC AND PROVN OF 03 X BATHROOM AT TRG COY AT APS WING, GRC KAMPTEE UNDER GE KAMPTEE.
2022_MES_572075_2
8470/E8
Open Tender
Civil Works
Item Rate
180 days
Kamptee
Class D Cat a (i) b (i)
5 documents required · 5 mandatory
₹500
Yes
GE Kamptee
₹86,960
Yes
25 Feb 2023
21 Jan 2023
13 Feb 2023
21 Jan 2023
11 Feb 2023
28 Jan 2023
Amount
Dismantling of asbestos cement sheet (corrugated, semi-corrugated etc) sheets in roof coverings complete all as specified and directed.
M&L for 0.50mm thick prepainted galvalume aluminium zinc coating G.I. based corrugated steel sheet (AZ150) of any colour having tensile strength of 550 MPA as in roof covering, fixed with and including self tapping screw/ J-type bolt/ L-type bolt complete all as per manufacturer instructions complete all as specified and directed.
M&L for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick (AZ150) of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws/J-type bolt/L-type bolt complete all as specified and directed.
Dismantling of timber fillets, rails, posts, rafters, purlins under 40 Sq cm in section complete all as specified and directed.
S&F mild steel work such as roof trusses (framed), trussed, purlins, and heavy bracket framing (Beam, Tee, angle, Channel or flat section) including distance pieces, cleat etc complete all as specified and directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/ slabs/ blankets any thickness and wall paneling including cover fillets, complete all as specified and directed.
M&L for 4mm thick Non Asbestos, fibre cement building board of size 595x595mm size in ceiling fixed or laid/ inserted including GI powder coated snap grid framework for false ceiling comprising of the following section for making partition of 600 x 600mm size fixed to wall with rawl plug and screw and hanged to roof with 4mm dia GI suspended wire of suitable length and butterfly clip of size of main Tee shall be 32mm x 15mm x 0.30mm, cross tee shall be 32mm x 15mm x 0.30mm thick with black lining in mid portion and wall angle shall be 24mm x 24mm x 0.30mm thick complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar beddeing (but not backing), removing serviceable tiles to store and debris complete all as specified and as directed.
M&L for coloured non skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed.
M&L for coloured non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed.
All as per item No 10 above but as in skirting with 10mm backing in cement mortar 1:4 complete all as specified and directed.
M&L for glazed ceramic coloured tiles 300mm x 450mm, on vertical surface such as skirtings/ dados set and jointed in neat cement slurry and pointed in coloured cement to match and including 10mm thick backing coat in CM 1:4 finished even and fair complete all as specified and directed.
Taking down existing water proofing treatment including PCC padding, mortar etc and disposal of rubbish outside of MD land and hacking for key, scrubbing down with water complete all as specified and directed.
M&L for provision of water proofing treatment by using APP torch on non woven polyster film reinforcement with 3mm thick and weight not less than 3.00 kg/sqm over roof and vertical surfaces including preparation of surfaces and applying oil based bituminous primer coat @ 0.30 ltr per sqm on clean and dry surface and then providing APP membrane laid with 100 mm over lap on both sides all as per manufacturer's instructions including 15mm thick cement plaster in CM 1:4 with WPC and two coat of aluminium paint of 0.2 Kg/Sqm over membrane complete all as specified and directed.
Demolition of RCC of any description and in any position not otherwise specifically provided for complete all as specified and directed.
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; not exc. 200 mm thick (Horizontal or sloping) Rough finished surfaces of concrete flat complete all as specified and directed.
M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exc 20 cm wide complete all as specified and directed.
M&L for RCC type B1 (1:2:4) using 12.5mm graded aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
M&L for Mild steel TMT bars 10mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed.
M&L for Mild steel TMT bars 5mm dia & over upto & including 10mm dia in stirrups, spacers & binders, cut to length, bent to shape required, binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and directed.
M&L for providing precast cement concrete Type B1 (1:2:4) (20mm graded aggregate) set in CM 1:4 in landings, cover slabs (for man holes etc.) roof kerbs, chullah hoods, chajjas, water roughs, mangers, shelves and similar articles with plain faces, complete all as specified and directed.
Demolition of Stone slabs & tiles of any description or thickness in floors, aprons etc. laid, bedded & pointed in any mortar complete all as specified and directed.
M&L for pre-polished Machine cut Kota stone slab flooring 20-25 mm thick over cement screed base 20mm thick in CM 1:4 laid and jointed wih grey cement slurry mixed with pigments to match the shade of the slab including rubbing and polishing complete all as specified and directed.
M&L for kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry @ 2 Kg per sqm mixed with pigment to match the shade of the slab incl rubbing and polishing, laid over and including 10mm thick screed in cement mortar 1:4 including taking down old one, complete all as specified and directed.
S&F pre-polished granite 20mm thick fixed on platform/ shelves/ steps/ cill over 20mm thick screed bed in cement mortar 1:4 including necessary moulding etc complete all as specified and directed.
M&L for machine cut cudappah stone slab 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete complete all as specified and directed.
Demolition of cement concrete any description and in any position not otherwise specifically provided for complete all as specified and directed.
M&L for 75mm thick cement concrete type C-2, 1:3:6 (40 mm graded aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as specified and directed.
M&L for 100 mm thick plain cement concrete type B1, (1:2:4) (using 20mm graded stone aggregate) as in floor/ hardstanding,etc finished surface even and smooth without using extra cement complete all as specified and directed.
M&L for providing 75mm thick cement concrete 1:4:8 type D2 (Using 40mm graded stone agg) as in sub base complete all as specified and directed.
M&L for providing 100mm thick cement concrete 1:4:8 type D2 (Using 40mm graded stone agg) as in sub base complete all as specified and directed.
M&L for pre polished chequered tiles rubber pressed glossy finish (any colour) 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment including 20mm screed bedding in cement mortar (1:4) complete all as specified and directed.
Demolition of brick work, built in cement mortar or cement lime mortar including all quoins, pillars etc. and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 50m complete all as specified and directed.
M&L for brick with fly ash brick old size straight of curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.
All as per item No 35 above but half brick wall in CM 1:4 complete all as specified and directed.
M&L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3, complete all as specified and directed.
S&F wire netting of galvanised steel wire 0.71 mm dia and size of mesh is 12mm fixed in properly with suitable nails for repair of cracks at various locations in wall, beam, chajja, facis, slab, lintel etc including taking down plaster of cracked portion and making good the area by rendering in CM 1:3 complete all as specified and directed.
Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc including removal of debris, complete all as specified and as directed.
M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces with CM 1:6 on internal walls finished even and smooth (without using extra cement) complete all as specified and directed.
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6, finished even and fair complete all as specified and directed.
M&L for rendering 15mm thick on brick or concrete surfaces in CM 1:4 using water proofing liquid compound as per manufacturer instructions, and finished fair and even complete all specified and directed. (WPC shall be measured and paid separately.)
Supply only liquid water proofing compound complete all as specified and directed.
M&L for rendering 5mm thick on fair faces of brick work or concrete surfaces with CM 1:3 on ceiling surfaces finished even and smooth (without using extra cement) complete all as specified and directed.
M&L for rendering dubbing coat over damaged irregular surface of chajjas roof projections/ ceiling/ facia etc average 15mm thick in cm 1:4 over cement slurry coat thick @ 3 Kg/sqm making the surface even followed by 5mm thick rendering in CM 1:3 furnished even& smooth including making of drip course as reqd complete incl roughening surface of old concrete by picking sweeping clean and washing with water complete all as specified and directed. Note: Rate for form work if required to be inclusive in the rate quoted by the contractor.
Dismantling loose/ disintegrated portion of RCC Chajjas, bands, shelves, beams, coloumn or slab and similar work including support if required and stitching of cracks with MS U clamps of 8mm dia @ 150mm c/c with inserting concrete block strecthner with cement mortar 1:3 mixed with adhesive chemical (polymer based) and reinforced with PVC chicken mesh including form work where ever required and finished with 10mm thick plastering in CM 1:4 finished even & smooth without using extra cement including preparation of surfaces to receive finishes complete all as specified and directed.
M&L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces including prepration of surfaces complete all as specified and directed.
M&L for prepartion of new plastered surface of wall and applying two coats of oil bound distemper over a coat of Primer over a coat of wall care putty complete all as specified and directed.
M&L for prepartion of new plastered surface of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.
M&L for prepartion of new plastered surface of wall and applying three coats of white wash complete all as specified and directed.
M&L for prepartion of new plastered surface of ceiling and applying three coats of white wash complete all as specified and directed.
M&L for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of cement primer and wall care putty complete all as specified and directed.
M&L for preparation of old plastered surfaces of wall and applying two coats of white wash complete all as specified and directed.
Taking down door / window frame with shutter (without taking of shutter from the frame) area not exc 1.50 sqm complete all as specified and directed.
Taking down door / window frame with shutter (without taking of shutter from the frame) area exc 1.50 sqm but not exc 4 sqm complete all as specified and directed.
Taking down shutter of any description exc 1 Sqm but not exc. 2 Sqm each and removing from site complete all as specified and as directed.
S&F pressed steel frame for doors of size 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming complete all as specified and directed.
S&F Pressed steel frame for doors of size 105 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming complete all as specified and directed.
M&L for PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate as in filling of pressed steel frame complete all as specified and directed.
S&F 30mm thick flush shutters solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed.
S&F 30mm thick 2nd class hard wood factory made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), kiln seasoned and chemically pressure treated complete all as specified and directed.
S&F aluminium (colour powder coated ) three track sliding window comprising of one fly proof shutter and two glazed shutters with frames of size 92.0mm x 31.75mm x 1.30mm thick and shutter frames of size 40mm x 18mm x 1.55mm thick with necessary joining cleats, glazing clips, rubber gasket, anodised aluminium snap beading and connected locking arrangement complete all as specified and directed. Notes:- (i) Glass filling in panels of windows and aluminium wire mesh/wire cloth shall be deemed to be included in the quoted rate for the item; (ii) Aluminium alloy wire cloth in panels of wire gauzed shutter shall be 0.45 mm nominal dia of wire and avg width of aperture 1.40 mm, fixed with aluminium wire staples; (iii) Glass filling in panels of glazed shutter shall be 5 mm thick tinted sheet glass of approved make and shade/tint Make of Aluminium Sections powder coated : Jindal or equivalent.
S&F colour powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
S&F colour powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinges type B-21100mm long (2 no.) suitable handle (1no.) complete all as specified and directed.
S&F 4mm thick figured (frosted) glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified and directed.
S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.
S&F framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening complete all as specified and directed.
S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 4mm thick moulded laminated PVC Sheet on the front face & 4mm plain colour PVC sheet on back face, with wood free EPS supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.
S&F 100 mm long SS butt hinges and fixed with screw/welded to frames etc complete all as specified and directed.
S&F 150mm Aluminium barrel tower bolts, fixed complete all as specified and directed.
S&F 100mm Aluminium anodised barrel tower bolts of extruded section, fixed complete all as specified and directed.
S&F 125 mm Aluminium pressed handles fixed complete all as specified and directed.
S&F 250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed.
M&L for preparation of new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
M&L for complete removal of existing treatment of old wooden surfaces of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.
M&L for preparation of new or previously untreated surfaces of steel and iron work of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide on new surfaces in any tint complete all as specified and directed.
M&L for preparation of old steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint etc complete all as specified and directed.
Cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10 cm girth in cement mortar 1:3 complete all as specified and directed.
S&F GI tubing 15 mm bore medium grade with all fittings and fixed to wall including taking up or down steel tubing and connection complete all as specified and directed.
S&F GI tubing 20mm bore medium grade with all fittings and fixed to wall including taking up or down steel tubing and connection complete all as specified and directed.
S&F in repairs vitreous china white squatting pan "Orissa Pattern" size 580x440mm, with integrated foot rest (excluding flushing sistern, flush pipe etc) including making good to floor complete all as specified and directed.
S&F in repair Vitreous China wash basin, white,with padestal flat back, size 540x400mm excluding flushing sistern, flush pipe etc but including brackets and padestal etc complete all as specified and directed.
S&F in repairs 10 ltr capacity PVC valve less symphonic action type flushing cistern low level, white with inlet ball valve float and handle including bracket etc complete all as specified and directed. Make: Prayag Cat No 501 or equivalent
S&F in repair bib tap 15mm dia cast copper alloy with crutch or butter fly handle screwd for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F in repair Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, fancy type screwed for iron pipe and fixed, complete all as specified and directed.
S&F in repairs chromium plated shower rose with or without swivel joints of 125mm dia including fixing to 15mm bore of pipe complete all as specified and directed.
S&F chromium plated shower rose with or without swivel joints of 125mm dia including fixing to 15mm bore of pipe complete all as specified and directed.
S&F in repair wall mixer, 3 in 1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe connecting legs & wall flange including showers both hand and over head, complete all as specified and directed. Make:- Jaquar cat part No FUS-29281 or equivalent.
S&F in repair PVC connection 15mm dia, 450 mm long including PTMT check nut complete all as specified and directed.
S&F PVC connection 15mm dia, 600mm long including PTMT check nut both side complete all as specified and directed.
S&F in repairs stop valve/angle cock 15mm dia chromium plated fancy type cast copper alloy high pressure with crutch or butter fly handle screwd for iron pipe or union and fixed complete all as specified and directed.
S&F stop valve/ angle cock 15mm dia chromium plated fancy type cast copper alloy high pressure with crutch or butter fly handle screwd for iron pipe or union and fixed complete all as specified and directed.
S&F in repairs 25mm dia stainless steel curtain rod of approved quality including cutting and fixing to curtain brackets complete all as specified and directed.
S&F fancy type curtain brackets of approved quality fixed to wall with screws complete all as specified and directed.
S&F tubular towel rail, 20mm dia, D type, 60cm long between flanges of brass chromium plated fixed with and including chromium plated brass screws and wooden/ plastic cleats complete all as specified and directed.
S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.
S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.
S&F in repair sinks with drainage board made of stainless steel thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm including waste pipe 32mm dia complete all as specified and directed.
S&F as in repair stainless steel kitchen plate rack of size 80x55x20 cm of minimum thickness 0.8mm including necessary drilling, fixing with screw, plugs in kitchen etc complete all as specified and directed. Make : Nirali/ Prayag
S&F waste fitting, 32mm/40mm brass, chromium plated for sink, basin, etc with long screwd shank and fly nut complete all as specified and directed.
S&F in repairs 40mm bore of pipe low density polyethylene pipe (LDPE) of pressure rating 6kg/cm fixed complete all as specified and directed.
S&F 40mm bore of pipe low density polyethylene pipe (LDPE) of pressure rating 6kg/cm fixed complete all as specified and directed.
S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.
S&F in repair 110 mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints, fixed to walls/floor with stack clamp every one mtr apart complete all as specified and as directed.
S&F 110mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints, fixed to walls/floor with stack clamp every one mtr apart complete all as specified and as directed.
S&F in repair CP grating doom with waste hole of size 125mm dia complete all as specified and directed complete all as specified and directed.
S&F in repair 75mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints, fixed to walls/floor with stack clamp every one mtr apart complete all as specified and as directed.
S&F 75mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.
Dismantling water tank of capacity exc 500 ltr & not exc 1000 ltrs and removing to store of any description complete all as specified and directed.
S&F 1000 ltrs capacity rotational moulded multi layer polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in including 20mm bore PTMT float valve position including connections complete all as specified and directed.
S&F built in steel cup board shutter made out mild steel, plain back sheet 1mm thick as in shutter and 1.25mm thick in frame work, cut to size, holes punched, welding, riveting, turning, bending etc. as require to made it in Godrej pattern complete with hinges, fasteners, locking system, 3 lever lock and CP handle, incl 2 coats of synthetic enamel paint over a coat of red oxide primer with spray machine all as shown on drawing complete all as specified and directed.
Dismantling boarding, any description, fixed in any position with screw complete all as specified and directed.
S&F in repair 18mm thick Alstone wood Polymer Composive Board (WPC) in cupboard shutter and like with decorative on both side design fixed by drilling screws and brackets complete all as specified and directed.
S&F 12mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive fixed in Aluminium doors, cabinet self, etc complete all as specified and directed.
S&F in repair Continuous (piano) hinges, SS, bright finish with 30mm width of flaps (When open), complete all as specified and directed.
S&F magnetic catcher of size 20mm x 50mm suitable for cup board shutters complete all as specified and as directed.
M&L Gun-metal, globe or gate valves, 15mm bore with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
M&L Gun-metal, globe or gate valves, 20mm bore with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
S&F in repairs Soap dish, CP 125mm size fixed to plugs with chromium plated brass screws complete all as specified and directed.
S&F soap dish, CP 125mm size fixed to plugs with chromium plated brass screws complete all as specified and directed.
S&F in repairs cabinet mirror 400x 500 mm for bathrooms complete all as specified and directed. Make: Prayag Cat Part No 551 equivalent
S&F in repair corner sheet glass shelf assemble consisting of 5.5mm thick sheet glass shelf with chromium plated bracket guard and railing complete all as specified and directed. Make: Prayag cat No BEA 44 or equivalent
S&F 100mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.
S&F IInd class hard-wood, small fittings such as bracket of any sizes, hinge blocks, cleats, door/window stoppers and like articles not exceeding 200 cubic centimetres each complete all as specified and directed.
M&L for PCC 1:2:4, type B0 (using 12.5mm graded stone aggregate) 25mm thick as in sunken floor complete all as specified and directed.
M&L for PCC type E2 1:5:10 (40 mm graded aggreate) in foundation, filling and mass concrete complete all as specified and directed.
M&L for Post Construction ATT Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron, etc complete all as specified and directed.
M&L for treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors, complete all as specified and directed.
M&L for Grouting in Brick/ RCC/ wall/ floor/ roof through PVC nipples at a spacing of 45 to 60 cm C/C including drilling injuction points to a depth of 75-100mm, providing 10mm dia PVC nipples and pressure grouting using with and including cement mixed with plasticizer admixture like FOSROC (model CEBEX100) or PIDILITE (MODEL 207 PIDICRET 8AM) @ 225 GMS/ 50kgs of cement to fill up all capilaries/voids/honecombing, nozzles to be sealed with sealing with pressure of 2 to 4 kg/sqcm and continued till refusal. After instructions complete all as specified and directed. Note:- After ascertaining the location of leakage/ seepage/ dampness under relevant item shall be operated of the required location.
Supplying and applying two component elastomeric acrylic polymer modified cementitious waterproofing coating, SmartCare Damp Block 2K Supremo or approved equivalent, having 80% elongation as per ASTM D412, resisting 5 bars hyrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per ASTM C 1202, crack bridging upto 1.2mm as per ASTM 4548.5. The coating shall have food grade certificate from laboratories like CFTRI. applying SmartCare Damp Block 2K Suprema in two coat 2 kg/sqmt consumption, The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing etc complete as per manufacturers specifications complete all as specified and directed.
Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth and getting out in hard /dense soil complete all as specified and directed.
M&L for providing cement concrete 1:4:8 type D2 (Using 40mm graded stone aggregate) as in foundation, mass concrete complete all as specified and directed.
M&L for providing cement concrete 1:2:4 type B2 (Using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.
M&L for form work to sides of concrete foundation, footings, bases of columns raft and raft beams, side and soffits (if any) of foundation and plinth beams, and similar work vertical or to batter for flat rough finished surfaces complete all as specified and directed.
M&L for form work to sides of pillars, posts, struts, pears, columns and stanchion square or rectangle or polygonal for fair finished surfaces complete all as specified and directed.
M&L for form work to sides and soffits of floor or roof beam, beams hunching, girders, bressummers, lintels, cantilevers, shelves supports, over hang etc also splays between floor and beams etc flat fair finished surfaces complete all as specified and directed.
M&L for form work to chullah hoods, chajjas, throughs and similar items including edges, flat fair finished surfaces complete all as specified and directed.
M&L for form work to soffits of suspended slabs such as roof slabs, floor slabs, landing horizontal or slopping similar work not. exc 200mm thick, and flat fair finished surfaces complete all as specified and directed.
M&L for reinforced cement concrete 1:1 ½ : 3 type A-1 (using 20mm graded stone aggregate) in foundations including rafts, footings, foundation beams, plinth beams, bases for columns etc basement slabs, under reamed piles and mass concrete complete all as specified and directed.
M&L for reinforced cement concrete 1 : 1 ½ : 3 type A-1 (using 20mm graded stone aggregate) as in columns, pillars, piers, posts & struts etc complete all as specified and directed.
M&L for reinforced cement concrete 1 : 1 ½ : 3 type A-1 (using 20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintel over 1.5m clear span complete all as specified and directed.
M&L for Reinforced cement concrete 1:1 ½ : 3 type A-1 (using 20mm graded stone aggregate) as in chajjas complete all as specified and directed.
M&L for reinforced cement concrete 1 :1 ½ : 3 type A-1 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies deck slabs, and in shelves and the like complete all as specified and directed.
M&L for moorum/red bajri filling in floors or pavings, hard standing and in foundation laid in layers not exc 15cm thick, spread, levelled and rammed including watering complete all as specified and directed.
M&L for hard core of broken stone or boulders of gauge not exc 63mm deposited, spread & levelled in layers not exc 15cm thick, including watering and ramming to a true surface complete all as specified and directed.
M&L for 25mm thick cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) as in sub base to floor finish fair and even complete all as specified and directed.
M&L non skid ceramic coloured tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles over & including 15mm thick cement screed in CM 1:6 complete all as specified and directed.
M&L coloured glazed ceramic tiles 350 x 450 x 6-7mm thick, in floors etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles including rendering 10mm thick in CM 1:4 complete all as specified and directed.
S&F vitreous china wash down water closet pan (pedestal pattern) 'P' or 'S' trap including plastic water closet seat, white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device etc complete all as specified and directed.
S&F vitreous China squatting pan, Orissa pattern, size 580mm x 440mm white with integral foot rests including setting the trap and pan in concrete and including 10 ltr capacity PVC valveless syphonic action type low level flushing cistern and 32mm dia PVC flush pipe including jointing to socket of flushing rim etc making good to floor complete all as specified and directed.
S&F vitreous china wash basin, white, flat back, size 550 x 400 mm excluding taps, waste, chain and plug and porcelain stopper complete but including brackets, including cutting for and pinning in ends of bracket or erecting stand but exclusive of S&F waste pipe inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed.
S&F brass CP mixer for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed.
S&F CP bib cock two way double handle with flange 15mm dia screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. Make:- Prayag cat No 7312 or equivalent.
Supply only pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, fancy type screwed for iron pipe and fixed complete all as specified and directed.
S&F health faucet of 15mm bore brass chromium plated including PVC connection 1 mtr long 15mm dia with 02 Nos check nut to connection 15 mm bore GI pipe complete all as specified and directed. Make:- Prayag Cat No BEA-40 or equivalent.
S&F PVC (SWR) 110mm bore bends any radius with oval access door complete all as specified and directed.
S&F PVC (SWR) 75mm bore bends any radius with oval access door complete all as specified and directed.
S&F PVC (SWR) 110mm bore junction single, (Single T) equal or unequal complete all as specified and directed.
S&F PVC (SWR) 75mm bore junction single, (Single T) equal or unequal complete all as specified and directed.
S&F PVC (SWR) 110mm bore vent cowl complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25cm in hard / dense soil complete all as specified and directed.
Removing excavated soil to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above starting point complete all as specified and directed.
Removing excavated material exc. 250m but not exc. 500m and depositing where directed complete all as specified and directed.
Excavation in post holes (or similar holes) Each not exc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25cm, watering and removing surplus soil to distance not exc 50m and making good surface in soft/loose soil complete all as specified and directed.
Excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth for foundation, laying of cable trench, pole and stay foundation etc or for shafts, wells, cesspits, manholes pier holes etc not exc. 10 Sqm on plan and not exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.
M&L for mild steel work in tubular trusses, purlins including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 complete all as specified and directed.
M&L for mild steel plates (plain or chequered) channels, square cut or notched (ordinary or counter sunk) forming holes, without any attachment conforming to Fe-410W Gde E-250 quality B complete all as specified and directed.
S&F 11 to 15mm mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm not exc 10 cm long, complete all as specified and directed.
S&F framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary gusset plate, riveting etc not exc 10kg each brackets conforming to Fe-290 Gde E-165 complete all as specified and directed.
M&L for sand filling under floor or in foundation including watering and consolidation complete all as specified and directed.
M&L for machine pressed precast concrete interlocking paver block of any shape and size, confirming to IS-15658-2006 of minimum thickness 60mm, concrete grade not less than M-35, complete all as specified and directed.
Taking down point wiring with aluminum conductor cable of light point fan & socket light & power complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell/ buzzer, bell push, tube light fitting, regulator etc and making good to the disturbed surfaces of walls/ floor etc to match with existing surfaces including white washing/ colour washing/ distemper to match with existing wall/ floor/ ceiling finishes complete all as specified and directed.
Taking down sheet metal enclosure DB, MCB, main switch etc and making good disturbed surfaces to match with existing surfaces complete all as specified and directed.
Taking down sub main wiring of any size/ capacity complete all as specified and making good disturbed surfaces to match with the existing surfaces complete all as specified and directed.
M&L for point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed in wall/ ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm pressed steel modular boxes sunk on wall for mounting of modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch. Note:- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly.
All as per item No 175 above but one ceiling /exhaust fan point controlled by one switch and regulator complete all as specified and directed.
All as per item No 175 above but one 3 pin 5 amp socket out point on the same board with other switches complete all as specified and directed.
All as per item No 175 above but one 3 pin 5 amp socket out point on the independent board with other switches complete all as specified and directed.
All as per item No 175 above but one bell / buzzer point complete all as specified and directed.
All as per item No 175 above but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 amps power point complete all as specified and directed.
M&L for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20mm medium grade concealed in wall of size 2x4.0 Sqmm with earth wire of 1x4.0 Sqmm complete all as specified and directed. Note:- Accessories for point/sub main wiring like PVC junction box, bend, Tee, elbow shall be of same make.
S&F for switch modular type single pole one way 6 amp 1 module 250 volts AC suitable for modular switch boxes complete all as specified and directed.
S&F for socket modular type single pole one way 6 amp 2 module 2/3 pin 250 volts AC suitable for modular switch boxes complete all as specified and directed.
S&F for switch modular type single pole one way 6/16 amp 3 pin 250 volts AC suitable for modular switch boxes complete all as specified and directed.
S&F for socket modular type single pole one way 6/16 amp 2/3 pin 2 module, 250 volts AC suitable for modular switch boxes complete all as specified and directed.
S&F ceiling rose surface type 3 terminal 5 amps complete all as specified and directed.
S&F electric bell ding dong AC 230V single phase complete all as specified and directed.
S&F bell push switch modular type single pole one way 5 amp 240 volts complete all as specified and directed.
S&F LED baton fitting 2' length including drivers having energy consumption, 10/11 W, 230V, 50Hz, 6500K not less than 1000 lumen prewired complete all as specified and directed.
S&F 18-22 Watt LED tube light fittings complete with aluminum body including tube rod, dirver with not less than 2000 Lumen O/P and l/p rated voltage 240 V connecting with 3 core 1 sqmm copper conductor cable complete all as specified and directed. Make & Model : Philips Astra Line CG LDC-20-CDL/ PHilips / Wipro / Crompton
S&F lamp holder insulated body with back plate for angle / batten fitting complete all as specified and directed.
S&F LED light fitting 9/10W bulk head luminaires with lamp holders etc complete with all accessories and including connecting upto with twin core twisted flexible cable of suitable size of 230V 50Hz complete all as specified and directed. Make: Philips / Jaquar/Suska / Havells
S&F building security light LED 25 W with lumen efficacy of 100 lumen/watt with driver with rated cvoltage 240 V, 50Hz, including mounting GI (made out of 25mm dia grade pipe 0.8 m bent two shape including FI clamps nout bolts etc complete all as specified and directed. Make: Philips / Jaquar/Suska / Havells
S&F exhaust fan metallic body 300mm sweep single phase, 230 volts 50Hz with nut and bolts washers etc and connecting up with twin core twisted flexible copper conductor cable of suitable size from fitting to ceiling rose and making holes complete all a specified and directed.
S&F exhaust fan strurdy engineering plastic body 300mm sweep single phase, 230 volts 50Hz with nut and bolts washers, louvers shutters etc and connecting up with twin core twisted flexible copper conductor cable of suitable size from fitting to ceiling rose and making holes complete all a sspecified and directed.
S&F MCCB TPN 63 amps 415 volts 50Hz 16KA connecting with incomer cable using suitable size lugs as required and connection to main DB using 10 sqmm x 4 FRLSH copper conductor complete all as specified and directed.
S&F MCCB enclosure suitable for MCCB 63A, made out of CRCA sheet complete with all connection complete all as specified and directed.
S&F MCB single pole & neutral 240 volt 6 to 40 amps 10 KA complete all as specified and directed.
S&F MCB triple pole & neutral 415 volt 40 to 63 amps 10 KA breaking capacity complete all as specified and directed.
S&F energy meter enclosure made of bakellite material with fixing of meter and testing complete all as specified and directed. Make:- Hensel / Ship / HPL
S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2KW capacity 25 litre, BEE 5 star rated with all accessories such as safety valve, thermostat, NRV, connection pipe etc complete all as specified and directed.
S&F sheet metal enclosure single pole & neutral for 240 volts 8 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed. Make :- Legrand / Havells /L&T
S&F MCB single pole 240 volt 6 to 40 amps 10 KA, complete all as specified and directed.
S&F double wall corrugated high density polymer ethyl (HDPE) pipe for laying of electric cable of size 50mm outer dia and 38mm inner dia with IS 14930 (part 2) 2001 and 6mm thickness laid in trenches, wall, poles including bends, sockets and other connected accessories complete all as specified and directed.
Supply and laying in trenches or fixing in walls/ poles or drawing through pipe XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 1100 volts grade, cross sectional area 10 sqmm 4 core including testing after laid and jointed complete all as specified and directed.
M&L for earthing complete with galvanized street earth plate electrode 600 x 600 x 6mm thick buried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr. below the normal ground level connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washer of galvanized iron or steel all as shown in electrical plate No 5 connected to earthing test point all as specified and testing on completion including the material and labour for:- (a) Excavation and earth work or drilling hole for electrode in any type of soil. (b) PCC pit in cement concrete (1:2:4) type B-1. (c) Pre cast RCC cover with suitable handle 40mm thick in PCC (1:2:4) reinforced with welded steel wire fabric weighting not less than 1.87 Kg/sqmm. (d) Funnel with watering pipe of GI 20mm nominal bore medium grade and Aluminum lugs etc all as specified. (e) 15mm nominal bore medium grade GI protection pipe up to 7.50 meter long for protection of earthing lead. (f) Requisite quantity of charcoal and common salt. (g) Connection to earthing test point and testing on completion.
NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.63,549.00]
M/s Jagdish Staioners and General Stores
M/s T.S.JOHAR
M/s Rahul Traders
Bidder Name
M/s Rahul Traders
M/s Jagdish Staioners and General Stores
M/s Rana Construction
M/s T.S.JOHAR
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .