ADDN ALT/UPGRADATION OF EXTERNAL SERVICES FOR GUEST ROOM COMPLEX AT HQ CENTRAL COMD OFFRS MESS UNDER GE (EAST) LUCKNOW

Amount

Exacavtion over areas, n.exc 1.5 m deep and getting out in soft / loose soil complete all as specified and directed.

Rolling and consolidating formation surfaces in cutting/filling etc complete with power road roller exc 8 tonne but n.exc 12 tonne etc complete all as specified and directed.

M&L for soling (or sub base) with broken boulder or quarried stone filled interstices 150 mm thick spread thickness surface formed and rolled and consolidated with power rolled to required gradiant and camber complete all as specified and directed.

M&L for 150 mm thick (compacted thickness) water bound macadam complete laid in two separate layers each layer of 75 mm thick (compacted thickness) having graded stone aggregate granite trap or basalt of grading II ranging from 63 mm to 40 mm, hollows blinded with and including screening with moorum, watered, consolidated and compacted each layer separately to the required gradient and comber with 8 to 10 tonne power roller complete all as specified and directed.

M&L for Premix Bituminous macadam, (consolidated thickness not more than 75 mm) with 4% paving bitumen binder of VG 30, by weight of total mix, rolled and compacted to required camber and gradient with power roller to a uniform smooth surface complete all as specified and as directed by Engineer-in-Charge.

M & L for preparing surfaces by brushing with wire brushes etc black top applying a tack coat with bituminous primer @ 5 kg/10 Sqm for bituminous premix asphaltic semi dense concrete, 40 mm (consolidated thickness) with 5.5% paving bitumen binder of VG 30, by weight of total mix, rolled and compacted to required camber and gradient with 8 to 12 tone capacity power roller to a uniform smooth surface complete all as specified and as directed by Engineer-in-Charge.

Removing excavated surplus materials n.exc 50 m deposting where directed at a level n.exc 1.5 m above from the starting point complete all as specified and as directed by Engineer-in-Charge.

M & L for preparation of road surfaces and applying thermoplastic reflective paint in marking of minium 2.50 mm thick single coat as in centre line and edge line road marking of 150/100 mm width using 'HOT MARK' thermoplastic paint (Hot application) white/yellow by indigenous modern prpolled road marking machine as directed including all ingredients such as blinder, glass beads Titanium dioxide calcium carbonate inter fillers themoplastic reuirement for glass shall be the table No 800.4 of MORT specification including spraying of glass beads etc all as per manufacture instructions and complete all as specified and as directed by Engineer-in-Charge.

Preparing unsurfaced water bond macadam surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and directed by Engr-in-Charge.

M&L for applying evenly a priming/tack coat with bituminous primer at 10 kg per 10 sq meters complete all as specified and directed by Engr-in-Charge.

Supply and fixing metal tubular delinator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of OMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermoplastic elastomer 3 bands of green, red and yellow reflector radim tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150 x150x300 mm) type B1 complete all as specified and directed.

Supply and fixing cate eye solar reflective type of metal body alloy of size 100mm x100mmx20 mm with PAMA striplens reflector of model No DA 920.0 fixed with and incl MS stud of suitable size as per manufacturers instructions

Supply and fix solar cat eye aluminium alloy shall (100% water proofing design according to 65) of size 125mm x125 mmx25mm (shank 65 mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable bateery (1.2V/1600MA) consisting of super bright LED with 10000 to 18000 mcd completed as per manufactures instruction etc all as specified and directed.

M&L for RCC pipe 200 mm dia NP-2 laid and jointed complete all as specified and as directed by Engineer-in-Charge.

Excavation in trenches not exc 1.5 m wide and not exc 1.5m depth and getting out in soft/loose soil complete all as specified and directed by Engr-in-charge.

M & L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foudation or mass concrete etc complete all as specpfied and directed.

M & L for brick work with fly ash bricks, straight or curved on plan exc 6M mean radius, old size brick built in cement mortar 1:6 complete all as specified and as directed.

Returing, filling in including spreading, leveling, watering and well ramming in layers not exc 25cm complete all as specified and directed by Engr-in-Charge.

Removing excavated material n exc 100m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed by Engr-in-Charge.

S&F (TMT bars) 10mm dia and over cut to length, bent to shape required, including cranking and bending spirally for hooping for coloumns, hooking ends and binding with and including M.S wire not less than 0.9mm dia all as specified and directed.

All as per item no 20 above but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders complete all as specified and directed.

M & L for reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in columns, pillars, piers, posts all as specified

M & L for 20 mm thick granite table rubbed and polished as required fixed on pilars over 15 mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for mild steel framed structural work as in doors or gates of angle or ther section with gusset plates, rairls braces etc complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or slinding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing of Fe-410-0 (Gde E- 250 complete all as directed by Engr-in-Charge.

M&L for preparation of new surfaces of steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of red oxide complete all as specified.

Surface dressing n exc 15 cm deep in soft/loose soil complete all as specified and directed.

M & L for hardcore of broken stone boulders gauge not exc 63 mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rolled/rammed to a true surface etc complete all as specified and directed.

M & L for 75mm thick cement concrete type C2, 1:3:6 (40mm graded stone aggregate) as in sub-floors, sub-bases, etc.; complete all as specified and directed.

M & L for providing and laying 60 mm thick factory made chamfered edge cement concrete paver blcok of M-35 grade with approved colour, design & pattern as in footpath, parks.lawn, drive ways or light traffic parking etc of required strength, thickness & size/shape, made by table vibratory method using PU moud , laid in required colour & pattern over and including 25 mm thick compacted bed of fine sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed by Engr-in- Charge.

M&L for exterior tile 30 cm x 30 cm x 12 mm thick set and jointed and pointed in neat cement slurry with grey cement and pigment in floors including 20 mm screed bed in CM 1:6 complete all as specified.

S&F Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

Excavating in post holes soft/loose soil (or similr holes) not exc0.5 Cum getting out returning filling in and reamming earth or broken rubble mixed with earth around, in lyers not exceeding 25 Cum watering and removing surplus soil to a distance no exc 50m and making good surfaces

M & L for cement concrete in foundations filling and mass Concrete type B2 1:2:4 (40mm graded aggregate) complete all as specified and directed by Engr-in- Charge.

S&F pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed.

M&L for galvanized steel medium grade of 50mm bore for flag post with all reqiurement complete all as specified and directed

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc, all as directed.

M&L rendering 15mm thick in cement mortar in 1:4 on fair face of brick work or concrete surfaces even and smoothe without using extra cement & with using integral water proofing compound complete all as specified and directed

S&F for mild steel work in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc,.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed .

S&F galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts including securing or type at crossings with and provision of galvanised mild steel wire staples or steel pins, etc as directed

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, and removing surplus soil to a distance n exc 50m and making good surface in soft/loose soil complete all as specified and directed

M&L for cement concrete type C2, 1:3:6 using 40 mm graded stone aggregate as in embedding of fencing post etc, complete all as specified and directed.

M & L for applying two coats of weather coat paint over a coat of Birla putty over a coat of primer on new/old plastered surface including preparation all as directed

M & L for 1:2:4 (12.5 Graded agg) Providing precast cement concrete louvres and jallies, 25mm thick (measured solid), including all mouldings but excluding frame

Supply and laying pipe galvanized, “Medium class”, including fittings 25mm dia all as per directed

Supply and fix Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe 25mm dia all as per directed by Engin-Charge.

Material and labour for Cutting Existing GI Pipe and inserting T of size 40x40x25mm for connecting new pipe for supply of water to the new building incl all other connected works and items for connecting the new pipe all as specified and directed by Enf-in-Charge. Note: Rate including Earth work and GI Tee all as per directed by Engin-Charge.

M&L for construction of the wall chamber of size 18x12x12 inch for the water supply of building and to operate the gate valve of 25mm size incl all PCC, Brick Work ,Plastering ,Chamber cover 3mm thick of CGI Sheet incl necessary Excavation work complete all as per directed by Engin-Charge.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core all as specified and directed by Eng-in-Charge.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core all as specified and directed by Eng-in-Charge.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core all as specified and directed by Eng-in-Charge.

M&L for sand cushioning for protection of cables complete all as specified and directed.

Supplying & laying common bricks sub class B for LT cable for protection of cable complete all as specified and directed.

Supply and fix LED gate light of 40/45W LED Postop luminaire with aluminium pressure die-cast mounting spigot & polyester powder coating in addition to a specific weathering resistance treatment, color RAL7011. Non-yellowing transparent Polycarbonate UV-protected round symmetrical diffuser with circular radial pattern for glare-free and even light distribution. High Efficiency long life LED module with efficacy of >100Lm/W, CCT 4000K, and CRI >70. Powered by built-in electronic driver with THD <10%, 4kV inbuilt surge protection, high cut-off at 325V & auto-restart, including 8hrs. protection from 440V (P2P). Suitable for pole mounting having OD of 60 mm and height of 6 meters. Fixture lumen efficacy >4500 Lm, IP66 (no glue), IK05, PF>0.95, Operating voltage range: 140- 277V, complete all as specified and directed.

Supply and fix 3m aesthetically designed decorative hot dipped galvanised mild steel step pole with grey powder finish, Compatible for all post top range, Window - Plasma cut & duly chamfered opening window of min size of 200x80 mm for terminal connections & mounting accessories. Window cover is fitted with allen screws to the pole all as per directed by Eng-in-Charge. Note: All civil work and earth work for fixing the pole is included in the item rate and NO EXTRA payment will be done to the contractor complete all as specified and directed.

Supply and fix Min 15/20W stellar LED post-top offering combination of sturdy design, execllent llumination and aesthetics in one go, IP 66 and IK 10 rating fully cast aluminium body finished with polyurethane paint with acrylic window cover, stands tall amid varid environemtnal conditions complete all as specified and directed.

Supply and fix mushroom LED Bollard 10W, 800 lumen light, new generation, energy saving, environmental friendly, long life aesthetically designed weather proof luminarie IP-65 and IK-07 protection die-cast aluminium landscape luminaire for downward lighting with high power LED as light source, Surge protection 100V-240V all as per directed. Note: All civil work and earth work for fixing the pole is included in the item rate and NO EXTRA payment will be done to the contractor complete all as specified and directed.

Supply and fixing Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-22 (8.5 metres long) all as specified and directed by Eng-in-Charge. Note: All civil work and earth work for fixing the pole is included in the item rate and NO EXTRA payment will be done to the contractor complete all as specified and directed.

Supply and fix Solar LED Bollard square light large, of 2.2 W new generation, energy saving, environmental friendly, long life aesthetically designed IP 65 protection ,300 lumen ,3000k CCT, dia 600 mmdie-cast aluminium landscape luminaire for downward lighting with high power LED as light source all as per directed.Note: All civil work and earth work for fixing the pole is included in the item rate and NO EXTRA payment will be done to the contractor complete all as specified and directed.

Supply and fix Solar-powered flame light 0.88W LED, 3000K large, new generation, energy saving, environmental friendly, long life aesthetically designed IP 65 & IK-07 protection, die-cast aluminium landscape luminaire with high power LED as light source all as per directed. Note: All civil work and earth work for fixing the pole is included in the item rate and NO EXTRA payment will be done to the contractor complete all as specified and directed.

Supply and fixing LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed by Eng-in-Charge.

Supply and fixing LED street light fitting 35/36W Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed by Eng-in-Charge.

Supply and fixing 40 Amps 3 pole ASTRONOMICAL time switch Digital Timelite distribution board Aesthetically appealing with locking facility IP54 degree of protection Switch On-Off street lights on time scheduling basis by incorporating ananalog/digital time switch and contactor Rating of contactor depends on the luminaires and wattage of lighting loads Range includes from 16A to 110A with analog/digital time switch all as specified and directed by Eng-in-Charge.

M/s Ramesh Chandra (BID ID -3165335)

ANIL CONSTRUCTION (BID ID -3165360)