COMBINDED ELECTRICAL WORK AS PER NIT

Amount

Replacement of burn out engine lubricant oil C14 in the existing generator set after drain out of burn out engine oil i/c refilling the same by new lubricant oil C14 etc as required.

Replacement of new spare parts like inner air filter, outer air filter, water filter, fuel water separator, and oil lubricating filter and resetting checking and testing etc as required.

Replacement of oil seal with top gasket set, front oil seal and rear oil seal with head gasket complete set by new one etc as required.

Replacement of coolent for as pwr required of 200 KVA D.G set and proper testing and checking etc.as required

Replacement of fan belt for DG set complete as required

Repair/ Replacement of radiator inner and outer complete cleaning and servicing testing and checking of leakage etc as required.

Replacement of top gasket remove the top cover and replacement of top gasket complete set with testing and checking etc as required.

Replacement of 12 volt express heavy duty Exide Generator battery capacity (Ah) 80 Ah- 200 Ah complete set i/c testing and tryal run of Generator.

Dismantling the 50 HP capacity Centrifugal motor pump set from base plate i.e. dismantle section and delivery pipe line and electrical motor connection complete etc. as required.

Dismantling the 50 HP capacity Centrifugal pump set for complete repairing i.e. replacement of tyre coupling Ball bearing and 1 no. bearing ring etc. by now one then reassembling all parts i.e. testing & trial run & including buy back the old/dismantled materials complete etc. as reqd.

Transportation charges for 2 nos 50 HP pump set for repairing CRPF campues to workshop and return back with loading and un-loading by special arrangement of 2 nos 50 HP pump one by one.

Supplying and fixing of SS shaft sleev complete set i.e. testing and trial smooth running for 2 nos pump.

Replacement of ball bearing by new on suitable for 50 HP centrifugal pump for upper pump etc as required.

Replacement of ball bearing by new on suitable for 50 HP centrifugal pump for lower pump etc as required.

Repaire and rectification of bearing housing complete by lathe machine for setting of ball bearing etc as reqired.

Re-Installation of 50 HP capacity centrifugal pump motor set in the existing base plate i.e. connection, testing and commissioning etc as required.

Supply and fixing of gland cover for main coupler guard plate in upper and lower pump house complete etc as required.

Supplying and fitting/fixing of rubber pad spider in upper and lower pump house etc as required.

Supply and fixing of of 4" dia pressure guard complete with set i.e. testing etc as required.

Replacement of foot valve (PN-1.6 SIS marked) i.e. fixing of gasket, nut bolts, flenge i.e. dismantling the old sluice valve and buyback the same etc as required.

Replacement of check nut for lower P/house etc. as required (Front side)

Replacement of check nut for lower P/house etc. as required (back side)

Lifting of the 12.5 HP capacity submersible pump motor set along with wire rope, submersible cable and G.I column pipe from the deep tube well by special arrangement i.e. disconnection of electrical connections etc. complete as required

Supplying installation, testing and commissioning of 12.5 HP submersible motor pumping set of suitable stage, suitable for operation 415 volts 3 phase A.C supply etc. as required.(Make: KSB Calama/BS)

Laying of 12.5 HP submersible pump motor's wire rope, submersible cable and G.I column pipe from the deep tube well by special arrangement i.e. connection of electrical connections etc. coplete as required

Supply and fixing of of 125 mm dia G.I pipe (Medium class) i.e. cutting, threating and socketing etc complete as required. (JINDAL/NEZONE/BANSAL UTKARSH)

Supply and fixing of 125 mm dia G.I pipe (Medium class) i.e. cutting, threating and socketing etc complete as required. (JINDAL/NEZONE/BANSAL UTKARSH)

Supply and fixing of G.I flange sutiable for 125 mm dia G.I Pipe i.e. nut bolts complete with rubber gasket etc. as required.

Supply and fixing of G.I flange sutiable for 80 mm dia G.I Pipe i.e. nut bolts complete with rubber gasket etc. as required.

Supplying and fixing of suitable size of nut bolt and washer as required.

Lead joint work in 4" to 6" Pipe line as when as required

Replacement of the Gasket of existing 500 KVA Transformer by opening the top cover, HT, LT cable end and HT,LT coils after drain out a little quantity of oil in cointainer i/c replacement of 02 Nos crack LT bushing and refitting the same i/c testing etc as required.

Supplying & providing of new Transformer oil in 03 Nos Transformer & HT OCBs etc as required.

Dehydration of Transformer oil by heating cum filtration machine to make the oil free from moisture, sledging, acidic & other chemical reactor to raise the dielectric strength to the required level etc as required.

Replacement of Silica gel from the chamber of breather of Transformer etc as required.

Supplying, fitting & fixing of 500 amp cut-out fuse, socketing connection as required.

supplying and fixing burnout fan coil

supplying and fixing Fan bearing

supplying and fixing fan shaft and bush

supplying and fixing fan capacitor

supplying and providing fan washing

supplying and fixing fan nut & bolt

MA BRAHMANI ASSOCIATES

POWER SERVICE