Survey, Supply, Transportation, Carriage, Erection, Testing and Commissioning for Laying of HT line and creation of 250 KVA SS for PHE at National Highway Malhar(Languishing Project) under jurisdiction of Executive Engineer ED Udh on turnkey basis

Survey, Supply, Transportation, carriage, erection, testing and commissioning for laying HT line at National Highway Malhar along with Tapping Point.

9 mtr long ST Pole (ST-410 SP33) for HT Line

GI V cross-arm with top Bracket including clamp

GI Channel X-arm including clamps and braces

GI Angle Braces (50X50X6) including clamps

30 mm² ACSR Weasel conductor

Galvanized Nuts and Bolts

Danger Plates with Clamps

Anti-Climbing Device with Clamps

11KV Pin Insulator (Polymeric) with Pins (12kv, 5KN) Creepage Distance 320mm

11KV Disc Insulators (Polymeric 45KN ) creepage distance 320 mm with tension fittings

Earthing complete by GI Rod 20 mm 2.5 mtr long through G.I Strip 25X3 mm in HT Lines

Painting of 9 mtr ST poles including crossarms/clamps with 1 coat of Red oxide Paint

Painting of 9 mtr ST poles including crossarms/clamps with 2 coat of Aluminium Paint

Cement bottoming 1:2:4 mix as per REC standards 0.5 Cum/Pole

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Survey, Supply, Transportation, carriage, erection, testing and commissioning for creation of 1 no 250KVA PHE Sub Station at National Highway Malhar

11/0.433kV, 3-phase 250KVA Distribution Transformers with Bimetallic Terminal Connectors Energy Level- 2, Copper wound and with LV Cable Box having detachable Aluminium Gland plate

Gapless Surge Arrestor, 9 kV ,10 kA ,LA with polymer housing, Stn. Type

11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type

11 kV Horn Gap Fuse Set 3 Phase 200A

300 mm² (2 ckt), 1.1kV Grade, PVC Insulated Stranded Conductor FRLS type

9 mtr. Long ST Pole (ST-410 SP33)

11kV Polymeric composite Disc Insulator 12kV, min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

GI Channel/Angle/Flat of sizes including clamps

Galvinized Nuts and Bolts.

Earthing of substation --Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of with RCC slab cover.

11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

LT Distribution Box with MCCB for incomer & SFU's for Outgoing Circuits (For 250 KVA Substation)

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Wedge Connectors / PG Clamps

Danger Plates with Clamps

GI Barbed Wire for Anti Climbing

3-Ø, 4-Wire Trivector Meter with CT PT Unit

Cement bottoming 1:2:4 mix as per REC standards 0.5Cum/Pole

Painting of ST Poles 9mtr of substation including cross arm, clamps with1 coat of Red Oxide

Painting of ST Poles 9 mtr of substation including cross arm, clamps with 2 coats of Aluminium Paint

AJAY KAPOOR

M/S VAISHNO TRADERS