REPAIR AND REPLACEMENT OF STREET LIGHT, FLOOD LIGHTS FITTING, FLOOD LIGHT,

Amount

Excavating in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and not exceeding 1.5 mtr in depth and getting out soft/loose soil complete all as specified.

Returning, filling in, trenches including Spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick all as specified.

Removing of surplus soil to a distance not exceeding 50 metre and deposited where directed at a level not exceeding 1.50 metre above the starting point all as directed by Engr-In-Charge.

Supply and spread sand in trenches as sand cushioning to under ground cable for protection with fine river sand(dry) and provide reqd cover after punning down complete all as specified and directed. Note : (a) Thickness of sand cushion after punning down shall be 18 cm. (b) Thickness of sand cushioning shall be measured after punning down.

Material and labour for brick protection cover to underground cables with sub class "B" over burnt brick (locally available best quality) laid dry and flat abutting each other with gaps not exceeding 10 mm complete all as specified and as directed.

Laying only brick protection cover to underground cables with serviceable over burnt brick laid dry and flat abutting each other with gaps not exceeding 10 mm complete all as directed. Note:- Serviceable bricks obtained vide Item No 09

Material and labour for PCC 1:3:6 C2 using 40 mm graded crushed stone aggregates as in foundations, filling and mass concrete all as specified.

Material and labour for PCC 1:2:4 B2 using 40 mm graded crushed stone aggregates as in coping including necessary formwork finished the surface even and fair with using extra cement all as specified.

Taking out existing LT cables of any size and type through rough excavation and removing to safe custody for credit material all as directed by Engr- In- Charge. Note: (a) Old serviceable bricks obtained will be kept aside for reuse. (b) Balance bricks price recovered in Schedule of Credit. (c) Quoted rate shall be deemed for excavation in trenches. (d) Damage of any pipe or existing surface will be rectified by the contractor.

Supply and laying, connecting, testing, commissioning LT UG cable XLPE Insulated,armoured, electric power cables (heavy duty) 1100 Volts grade conforming to IS 7098 with aluminium conductor multi-strand of cross-sectional area 10 Sqmm 2 Core laid in trenches / ducts/ inside protection pipeincluding cable glands, lugs and suitable size of MS saddle clips etc. all as directed by Engr-In-Charge. Make: Polycab(ISI Marked)/ Plaza(ISI Marked)/ KEI(ISI Marked) Note:-(a) Excavation, sand cushioning, bricks shall be measured and paid separately (b) The Payment shall only be allowed after production of original GST defaced purchase vouchers by Engr- In- Charge

Supply and laying, connecting, testing, commissioning LT UG cable XLPE Insulated,armoured, electric power cables (heavy duty) 1100 Volts grade conforming to IS 7098 with aluminium conductor multi-strand of cross-sectional area 16 Sqmm 4 Core laid in trenches / ducts/ inside protection pipeincluding cable glands, lugs and suitable size of MS saddle clips etc. all as directed by Engr-In-Charge. Make: Polycab(ISI Marked)/ Plaza(ISI Marked)/ KEI(ISI Marked) Note:-(a) Excavation, sand cushioning, bricks shall be measured and paid separately (b) The Payment shall only be allowed after production of original GST defaced purchase vouchers by Engr- In- Charge

Taking out unserviceable street light including driver and necessary fittings and fixing only 72W LED street light with driver and all fittings and accessories complete all as directed by Engr- In- Charge. Note: (a) Light fitting including driver will issued under Sch B store. (b) Contractor will quoted his rate including fittings and accessories. (c) All T&P and safety equipment shall be provided by the contractor on his own arrangements.

Taking out unserviceable street light including driver and necessary fittings and fixing only 125 W LED street light with driver and all fittings and accessories complete all as directed by Engr- In- Charge. Note: (a) Light fitting including driver will issued under Sch B store. (b) Contractor will quoted his rate including fittings and accessories. (c) All T&P and safety equipment shall be provided by the contractor on his own arrangements.

Taking out unserviceable street light including driver and necessary fittings and fixing only 90 W LED street light with driver and all fittings and accessories complete all as directed by Engr- In- Charge. Note: (a) Light fitting including driver will issued under Sch B store. (b) Contractor will quoted his rate including fittings and accessories. (c) All T&P and safety equipment shall be provided by the contractor on his own arrangements.

Taking out unserviceable flood light upto a height 20 mtr including driver and necessary fittings and fixing only 200 W LED flood light with driver and all fittings and accessories to the existing position complete all as directed by Engr- In- Charge. Note: (a) Light fitting including driver will issued under Sch B store. (b) Contractor will quoted his rate including fittings and accessories. (c) All T&P and safety equipment shall be provided by the contractor on his own arrangements.

Taking out unserviceable flood light to a height of 20 mtr to 26 mtr including driver and necessary fittings and fixing only 200 W LED flood light with driver and all fittings and accessories to the existing position complete all as directed by Engr- In- Charge. Note: (a) Light fitting including driver will issued under Sch B store. (b) Contractor will quoted his rate including fittings and accessories. (c) All T&P and safety equipment shall be provided by the contractor on his own arrangements.

Taking out unserviceable flood light upto a height 26 mtr including driver and necessary fittings and fixing only 500 W LED flood light with driver and all fittings and accessories to the existing position complete all as directed by Engr- In- Charge. Note: (a) Light fitting including driver will issued under Sch B store. (b) Contractor will quoted his rate including fittings and accessories. (c) All T&P and safety equipment shall be provided by the contractor on his own arrangements.

Supply and fix LED Post top lantern of 40 Watts, 240V, 50Hz , IP65 protection,5700 K anti corrosive die cast aluminium body Make: Century LED Product Code APBY040C/ Crompton Cat No LPTO-40-CDL / Bajaj Cat No BGCL 40W LED WH Note:- (a) LM-79 and LM-80 certificate from NABL accredited Lab shall be submitted for LED light fittings. (b) Warranty certificate shall be submitted for LED light fitting as per standered format for minimum 50000 Hrs. (c) LED light fitting and drivers shall be of same make. (d) The contractor shall produced printed GST voucher to the Engr- In- Charge for future reference.

Supply, fixing and commissioning integral decorative Aluminium die cast Opal PC diffuser with rated lamp of 8-10 W, IP 65 protection , cylindrical in shape including driver and all accessories and taking out unserviceable one. Make: Havells LED Item description BAMBOOBL8WLED857SSYMTOPC/ Crompton Cat No LBLA3-10-CDL / Bajaj Cat No BGBOL 605 9W LED Note:- (a) LM-79 and LM-80 certificate from NABL accredited Lab shall be submitted for LED light fittings. (b) Warranty certificate shall be submitted for LED light fitting as per standered format for minimum 50000 Hrs. (c) LED light fitting and drivers shall be of same make. (d) The contractor shall produced printed GST voucher to the Engr- In- Charge for future reference.

Supply and fix MCB four pole 240 volts, 50 Hz capacity 63 Amps,10 KA 'C' curve including taking out unserviceable one all as specified. Make: ABB Cat No 1SYS274011R0634/ Siemens Cat No 5SL64637RC / L & T Cat No BB40630C Note: The contractor shall produced printed GST voucher to the Engr- In- Charge for future reference.

Taking down old unserviceable GI bracket of any size and any type including all accessories from any height of steel/RCC pole as directed by Engr- In- Charge.

Supply and fix GI bracket for street light made out 32 mm bore, light grade 1.5 mtr length (ISI Marked) GI tube with all fittings (ISI marked) and fixed to wall and ceiling or laid in floor or in poles complete all as directed by Engr- In- Charge. Make:- Jindal/ TATA/ Prakash Note:-The contractor shall produced printed GST voucher to the Engr- In- Charge for future reference.

Supply and fix GI bracket for street light made out 25 mm bore, light grade 1.5 mtr length (ISI Marked) GI tube with all fittings (ISI marked) and fixed to wall and ceiling or laid in floor or in poles complete all as directed by Engr- In- Charge. Make:- Jindal/ TATA/ Prakash Note:-The contractor shall produced printed GST voucher to the Engr- In- Charge for future reference.

Supply and fix as in repair terminal/junction box of size 250 mm x 200 mm x 105 mm of polycarbonate thermoplastic housing, weather, water proof, dust proof fire retardant with 4 No aluminum bus bar of rating 100 Amp mounted on porcelain/cast resin insulator having one MCB SP 6 Amps 'C' series 240 V/415 V, breaking capacity 10KA Make for Junction Box: Naithani Plastic Moulding work/Supreme Industries/Sintex industries Ltd. Make for MCB: ABB Ordering Code 1SYS271011R0064 / L & T Cat No BB10060C/ Siemens Cat No 5SL61067RC Note:-The contractor shall produced printed GST voucher to the Engr- In- Charge for future reference.

Supply and fix as in repair FR PVC insulated round sheathed copper conductor flexible 2.5 sqmm 2 core industrial cable of 1100V conforming to IS 694 including 20 mm bore GI tubing light grade for connction of street light on pole from DB including flat iron clamp sets,termination clips etc. as directed by Engr- In-Charge. Make:Havells(ISI Marked)/ Plaza(ISI Marked)/ KEI(ISI Marked) Note:- The contractor shall produced printed GST voucher to the Engr- In- Charge for future reference.

Material and labour for earthing with galvanised steel earth plate electrode 60cmX60cmX 6mm thick,buried directly in ground(earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts,check nuts and washers of galvanised iron or steel, earth strip protected by and including GI Pipe 40 mm dia bore(light grade) and connected to main test point as directed and including Concrete Pit in PCC (1:3:6) type C1 precast RCC (1:1.5:3) type A1 cover slab 54 X 54 X 5 Cm reinforced with 8mm dia TMT bars@150mmC/C both ways with one handle for lifting made of 8mm dia TMT bar embeded in precast cover slab,funnel,wire mesh , 20 mm bore GI Pipe (medium grade) for watering charcoal and salt in alternate layers, incl necessary excavation and earth work in any type of soil complete all as shown on electrical plate no 3 of SSR part I complete all as specified.

Material and labour for boring of holes under road, pavement, hard standing in conventional method without disturbing the top surfaces as directed by Engr- In- Charge.

Supply and fix GI Tubing 40 mm bore, light grade (ISI Marked) with all fittings (ISI marked) and fixed complete to wall and ceiling or laid in floor complete all as specified and directed Make:- Jindal/ TATA/ Prakash Note:-The contractor shall produced printed GST voucher to the Engr- In- Charge for future reference.

Supply and fix GI Tubing 50 mm bore, light grade (ISI Marked) with all fittings (ISI marked) and fixed complete to wall and ceiling or laid in floor complete all as specified and directed Make:- Jindal/ TATA/ Prakash Note:-The contractor shall produced printed GST voucher to the Engr- In- Charge for future reference.

Material and labour for steel tubular swaged pole complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type 410 SP- 32 (9.0 m long) confirming to IS-2713 (Part I & II) incl painting of pole with two coats of aluminium paint over a coat of red oxide zink chrome primer from top of the pole to 1.5m above the bottom of the pole and painting with two coats of black bituminous paint over a coat of red oxide zink chrome primer upto 1.5 m from bottom of the pole including numbering of poles as directed by Engr-In-Charge. Make of pole:- Jindal Steel/Calcutta Poles & Tubes/National Tubing Co. Make for Paint:-Shalimar Paints Ltd. (Superlac)/ Apcolite(Asian)/ Luxol (Berger) Note :(a) Excavation and earth work and pcc shall be measured and paid separately under respective items (b)The contractor shall produced printed GST voucher to the Engr- In- Charge for future reference.

Material and labour for steel tubular swaged pole complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type 410 SP- 22 (8.5 m long) confirming to IS-2713 (Part I & II) incl painting of pole with two coats of aluminium paint over a coat of red oxide zink chrome primer from top of the pole to 1.5m above the bottom of the pole and painting with two coats of black bituminous paint over a coat of red oxide zink chrome primer upto 1.5 m from bottom of the pole including numbering of poles as directed by Engr-In-Charge. Make of pole:- Jindal Steel/Calcutta Poles & Tubes/National Tubing Co. Make for Paint:-Shalimar Paints Ltd. (Superlac)/ Apcolite(Asian)/ Luxol (Berger) Note :(a) Excavation and earth work and pcc shall be measured and paid separately under respective items (b)The contractor shall produced printed GST voucher to the Engr- In- Charge for future reference.

Supply and fix PVC line separator, spiral type in position for LT overhead line having four wire system including taking out old broken/ unserviceable one.

Supply and fix PVC line separator, spiral type in position for LT overhead line having two wire system including taking out old broken/ unserviceable one.

Dismantling and taking down of unserviceable LT insulators any size/type/capacity from any height of pole as directed by Engr- In- charge.

Material and labour for pin type, porcelain, vitreous, white, brown or green insulator including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut, 100 mm height, 65 mm dia for 1100 volts grade complete all as specified.

Supply and fix shackle porcelain, vitreous, white brown or green insulator including galvanised mild steel straps, washers, insulator, bolts, nuts etc for 100 mm height and 115 mm dia for working pressure 1100V with 31 mm x 5 mm galvanised steel straps and 14 mm dia bolts complete all as specified.

Material and labour for stay assembly complete with accessories as shown in electrical plate No.1. Note: loop type insulator, stay clamps, excavation and concrete measured and paid separately

Supply and fix Loop type insulator, vitreous porcelain, white, brown or green large size, with overall dimensions 140 mm, clearance of hole 25.5 mm complete all as specified.

M&L for preparation of old painted surfaces of steel tubular pole, 8.5 mtr long and applying two coats of black synthetic enamel paint (1st grade quality) upto a height of 1 mtr from the ground level and two coats of aluminium paint over the remaining portion of pole including cross arms, bracing, clamps, etc. and numbering of pole with black paint over the base of white circle of 150mm dia completed for inspection all as specified and all as directed (as and when required for inspection purpose or maintenance). Make for Paint:-Shalimar Paints Ltd. (Superlac)/ Apcolite(Asian)/ Luxol (Berger) Note:-The contractor shall produced printed GST voucher to the Engr- In- Charge for future reference.

M&L for preparation of old painted surfaces of steel tubular pole, 9 mtr long and applying two coats of black synthetic enamel paint (1st grade quality) upto a height of 1 mtr from the ground level and two coats of aluminium paint over the remaining portion of pole including cross arms, bracing, clamps, etc. and numbering of pole with black paint over the base of white circle of 150mm dia completed for inspection all as specified and all as directed (as and when required for inspection purpose or maintenance). Make for Paint:-Shalimar Paints Ltd. (Superlac)/ Apcolite(Asian)/ Luxol (Berger) Note:-The contractor shall produced printed GST voucher to the Engr- In- Charge for future reference.

Supply and fix as in replacement automatic street light switch using Astro timer switch 4 module alongwith 40A power contractor 4 no moduler type to be fitted with 3 module DB , 40A 4P MCB, "C" curve, 10KA with short circuit fault indicator 4 module, 12 way SPN DB, IP43, IK09 all as directed. Make : L&T/ABB/Indoasian Note:- The contractor shall produced printed GST voucher to the Engr- In- Charge for future reference.

Taking down carefully the lighting cage of 12m height High Mast pole installed at NAA Quarter area dismantling the existing LED flood light fittings, secure carefully the crane lifting belts, disconnecting all the electric connections from the connected panel, carefully open all the foundation bolts, nuts at the bottom of the High Mast system, carefully lifting the pole from the foundation with crane, lowering carefully the dismantled pole on the wooden block & steel supports placed in position on the ground to avoid any damage to the pole, removing the lighting cage, lighting protection system, aviation construction lamps, relocating the pole to Football ground area which is of 3KM away fixing the High Mast pole complete with all fittings and fixtures including necessary foundation all as per Manufacturers instructions. Note : (a) Demolition of the existing foundation and 2 nos of 10 mm thick base plates are deemed to be included in the Quoted rate. (b) Necessary PCC, RCC, excavation, nut, bolt, washers are measured and paid separately.

Excavating over areas, not exceeding1.5 mtr deep and getting out soft and loose soil complete all as specified.

Material and labour for PCC 1:4:8 D2 using 40 mm graded crushed stone aggregates as in foundations, filling and mass concrete all as specified.

Material and labour for reinforced cement concrete, 1:1.5:3 type A1 using 20 mm graded crushed stone aggregates as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns,etc. basement slabs, under-reamed piles and mass concrete etc complete all as specified. Note:- Reinforcement and form work shall be measured and paid separately.

Material and labour for reinforced cement concrete 1:1.5:3 type A1 using 20 mm graded crushed stone aggregates as in columns, pillars, etc complete all as specified. Note:- Reinforcement and form work shall be measured and paid separately.

Material and labour for use and waste of formwork to sides of rough finished flat concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified.

Material and labour for use and waste of formwork to sides of rough finished flat concrete formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified.

Material and labour for Mild steel TMT bars of Fe 500D, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for chainlink fencing and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified.

Material and labour for Mild steel TMT bars of Fe 500D, 8 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified.

Supply and fix Mild steel bolts. purpose made. with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. exceeding 30 cm long and diameter of neck exceeding 20 mm but not exceeding 25 mm complete all as specified.

Supply and replace over voltage, over current surge protection for LED street ights input voltage 440 Volts capable of withstanding maximum of 15 KA surge current 5 KV for lamps rated upto 75 Watt complete as required at site for various makes of light fittings. Make : Crompton / Bajaj / Havells Note:- The contractor shall produced printed GST voucher to the Engr- In- Charge for future reference.

All as per above item but 5 KV for LED lamps rating upto 150 Watt Make : Crompton / Bajaj / Havells Note:- The contractor shall produced printed GST voucher to the Engr- In- Charge for future reference.

All as per above item but 10 KV for LED lamps rating upto 500 Watt Make : Crompton / Bajaj / Havells Note:- The contractor shall produced printed GST voucher to the Engr- In- Charge for future reference.

Supply and replace LED drivers for outdoor luminaries 45 Watt capacity complete all as per site requirement to suit the existing make of lamp fitting or as directed by the Engr-in-Charge. Make : Crompton / Surya / Havells Note:- The contractor shall produced printed GST voucher to the Engr- In- Charge for future reference.

All as per above item but upto 75 Watt capacity Make : Crompton / Surya / Havells Note:- The contractor shall produced printed GST voucher to the Engr- In- Charge for future reference.

M/S BISWAS AND KUNDU CONSTRUCTION

M/S ANANDA ENTERPRISE