PROVN OF IRON SHED FOR PARKING OF 08 X VEH AT MT AREA OF 417 FD HOSP AND PROVN OF BATHROOM AND TOILET NEAR BLDG NO R 67 OF 33 CHDS AT RHENOCK AND RONGLI UNDER GE 867 EWS

Amount

Excavation over area not exceeding 1.5m deep and getting out in soft/loose soil complete all as specified and as directed.

Excavation over area exceeding 1.5m deep not exc 3.0 and getting out in soft/loose soil complete all as specified and as directed.

Excavation in trenches n exc 1.50m wide and not exc 1.50m deep for foundation and getting out in soft / loose soil complete all as specified and as directed.

M&L PCC type D-2 (1:4:8) (using 40mm graded stone agg) in foundation filling and mass concrete.

M&L Returning filling in, including spreading, levelling, watering and well ramming in layers not exc. 25cm in soft / loose sioil.felling under floor complete all as specified and as directed.

Removing excavated material not exc 50m and depositing where directed at a level not exc 1.50m above the starting point complete all as specified and as directed.

M & L precast cement concrete type C-1 , (1:3:6) (using 20mm graded stone aggt) block masonry with solid blocks 10cm in and setting in cement mortar (1:6) complete all as specified and as directed.

M & L for modular fly ash bricks as in brick work straight or curved on plan exceeding 6m mean radious built in cement mortar (1:6) complete all as specified and as directed.

Formwork to soffits of suspendes slab such as slabs, floor slabs, landings and smillar work; not exceeding 200 mm thick (horizontal and sloping) for rough finished surfaces complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers, lintels, cantilevers, shelves including supports, overhangs,etc. also splays between floors and beams, etc.for rough finished surface of flat concrete complete all as specified and as directed.

M & L Reinforced cement concrete (Nominal mix ) type B1 (1:2:4) (20 mm graded crushed stone ggregate) as in Beams, cantilevers, bressummers,lintels over 1.5m span complete all as specified and directed.

M & L Reinforced cement concrete (Nominal mix ) type B1 (1:2:4) (20 mm graded crushed stone aggregate) as in slabs supported on walls, roof beams and columns in floors, roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L for precast cement concrete type-B-1, (1:2:4) (20 mm graded aggregate) as in cover slabs, set in cement morter 1:6 complete all as specified and as directed

M&L for PCC (1:3:6) type C1 using 20mm graded stone aggregate as in coping, bed blocks, benching, haunching etc including weathering, slightly rounded or charmfered and including required form work, complete all as specified and directed.

M&L mild steel deformed bars 10mm dia and over cut to length bend to shape required incld cranking bending spirally for hooping for column, hooking ends and binding with and incld mild steel wire (annealed not less than 0.90mm dia or securing with clips complete all as specified and as directed.

Ditto as per sl item No-15 above but 5mm dia and over upto and incld 10mm dia in stirrups, spacer and binders complete all as specified and as directed.

M&L for 15mm thick rendering on fair faces of brick work or concerte surface in cement mortar (1:3) finished even and smooth without using extra cement complete all as specified and directed.

M & L 15mm thick rendering on fair faces of brick work or concrete surface in cement mortar (1:6) complete all as specified and as directed.

M&L 20mm thick rendering in two layers of 10mm each on brick or block concrete masonry walls in cement mortar (1:4) with WPC incl finished even and smooth w/o using extra cement complete all as specified and as directed.

M & L preparing newly plastered or unplastered surfaces of wall and applying three coat of white wash complete all as specified and as directed.

S & F rolled section as in main and cross beams hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angles cleats or other connecting plates in FE-410W (Gde E-250) quality A complete all as specified and as directed.

M&L Preparation and applying two coat of synthetic enamel paint over one coat of red oxide primer on new steel surfaces, of any description, over 10cm width or girth not other wise described complete all as specified and as directed.

S&F Pre- painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering, fixed with seif tapping screws complete all as specified and as directed.

S&F pre-painted galvalume aluminum zinc coating GI plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as in ridge complete all as specified and as directed.

M & L hardcore of gauge exc 63mm but n exc 100mm,deposited, spred and levelled in layers n exc 15 cm thick watered and rolled /rammed to a true surface complete all as specified and as directed.

M & L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M & L for 100 mm thick cement concrete type D-2, 1:4:8 (40 mm graded aggregate) as in sub base or sub flooring fininshing the surface even and smooth using extra cement receive the topping layer complete all as specified and directed.

M & L screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cement mortar (1:6) complete all as specified and as directed.

Non Skid ceramic colour tilles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and as directed.

M & L screed bed or bedding layer of mortar 10 mm thick for fixing wall tiles in cement mortar (1:4) complete all as specified and as directed.

M & L glazed ceramic coloured tiles (300 x 200mm) x 6mm thick on vertical surfaces such as skirting , dados & risers to steps set & Jointed in neat cement slurry & pointed in colored cement to match the surface complete all as specified and as directed.

S&F GI frame work of size 605 x 605mm, for seamless celing comprising of GI perimeter chanel 0.55mm thick with two unequal flangesof 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and incl ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete all as specified and as directed.

S&F 10mm thick PVC insulation panels with EPS stuck to 1mm printed PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S.complete all as specified and as directed.

Solid PVC door frame of size 50mm x 47 mm, made out of 5mm plain colour PVC sheet, reinforced with MS square tube supplying and fixing in openings as per specification & drawing complete all as specified and as directed.

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail and bottom rail on either side and as gap insert for top rail and bottom rail , panelling of plain colour PVC sheet to be fitted in the MS framewelded/ sealed to the stiles and rails with suitable PVC sheet beading , and jointed together with solvent cement in the frame at site as per specification complete all as specified and as directed.

S & F 200mm long aluminium anodised barrel tower bolts of extruded sections complete all as specified and directed.

S & F 150mm long aluminium handle cost type anodised complete all as specified and directed.

S&F 75 mm size butt hinges, medium weight , cold rolled, mild steel and fixed complete all as specified and directed

S & F steel ventilator with top hung shutter, including hinges, steel peg stay, complete all as specified and directed..

S & F 3.0 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.

M&L 75 mm thick PCC type C-2 (1:3:6) (40 mm greded stone aggt) for plinth protiction, path/ steps etc to be finished fair and even complete all as specified and as directed.

S & F 110 mm bore PVC Pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed.

S & F 110 mm bore PVC bends any radius complete all as specified and directed.

S&F 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed

S & F 75 mm bore PVC bends with including for all necessary extra joints cuttings and waste to any radius complete all as specified and directed.

S & F 75 mm bore PVC junction double, (double T), equal or unequal complete all as specified and directed.

S&F 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed

S & F 15mm bore of tube medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors complete all as specified and directed.

S & F 15mm bore of tube medium grade galvanized with all fittings & fixed completet laid in trenches complete all as specified and directed.

S & F bib taps cast copper alloy chromium plated with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule & fixed 15mm bore complete all as specified and as directed.

S & F 15mm dia fencey type pillar tap, cast copper alloy, capstan heads, chromium plated,screwed down high pressure, long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and as directed.

S & F Stop cock 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions complete all as specified and as directed.

S & F shelf of PTMT fixed with and including chrominium plated brass screws and wooden/plastic cleats (Min wt 300 gms) complete all as specified and as directed.

S & F towel rail 600 mm long of PTMT fixed with and including chrominium plated brass screws and wooden/plastic cleats (Min wt 190 gms) complete all as specified and as directed.

S & F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F in vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in positioncomplete all as specified and as directed.

S & F toilet paper holder with flat recessed type stainless steel fixed to wall complete all as specified and directed.

S & F PVC valve less, syphonic action type flushing cistern 10 ltr capacity low level, with inlet, ball valve float, flush pipe and handle including brackets complete all as specified and as directed.

S&F Vitreous china WHB 550x400 mm white flat back including pedestal and bracked complete all as specified.

S&F vitreous china urinals, haif stall type white with grating and union for discharge pipe including fixing plugs beddeing urinal againest wall in cement morter (1:2) securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified and as directed.

S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60 gms) complete all as specified and directed.

M & L PCC (1:4:8), type D-2 conrete bed to drain pipes incl packing under and haunching against the sides of pipes after they are laid and tested in 110mm dia complete all as specified and directed.

M & L for 75 mm thick cement concrete type D-1, (1:4:8) (40 mm graded aggregate) as in sub base or sub flooring fininshing the surface even and rough to receive the topping layer complete all as specified and directed.

M&L machine pressed chequered cement concrete tiles size 30cm x 30cm x 25mm thick and above, set,jointed and pointed in neat slurry with grey cement and pigments in floors cut and polished. over and incl 15mm thick screed bed or bedding layer of motar for laying floor finishes in cement plaster (1:6) all as specified and as directed.

Form work to sides of concrete foundations, footings, bases of columns and plinth beam, drain and similer work etc in rough finished surfaces of concrete flat.

M&L for PCC type C-2, (1:3:6) (using 40 mm graded crushed stone aggregate) as in surface channels and drains complete all as specified and directed.

S&F gun metal, globe or gate valves of 25 mm bore dia., with iron wheel head, screwed both ends for iron pipes and fixed including all as specified and directed. Make : Zoloto/Leader/Audco/Kirloskar

S&F gun metal, globe or gate valves of 20 mm bore dia., with iron wheel head, screwed both ends for iron pipes and fixed including all as specified and directed. Make : Zoloto/Leader/Audco/Kirloskar

S&F Rotational moulded polythene water storage tank ( cylindrical vertical with closed tops ) hoisted and fixed in position of 1000 Ltrs capacity including tank cover and all necessary connection of tank nipple all as specified and as directed. Make : Sintex/Diplast/Polycon

S&F steel water tubing of the 25 mm bore sizes, ‘Medium grade’, galvanized, with all fittings; laid in trenches or on ground. Make :-Jindal/Tata/Prakash/Surya Roshni Ltd

S&F steel water tubing of the 20 mm bore sizes, ‘Medium grade’, galvanized, with all fittings; laid in trenches or on ground. Make :-Jindal/Tata/Prakash/Surya Roshni Ltd

S&F PVC float valve, high pressure with polythene float and fly nut complete screwed for PVC pipe and fixed in 20mm bore pipe complete all as specified and as directed by Engineer-incharge.

M&L for cutting, screwing the same for alterations or additions in position including refixing old steel tubing and connections in new or old position by means of equal 'T' of Reduced 'T' junction of dia upto 50mm complete.

M&L compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc conforming to Fe 410-w (Fde - E- 250) Quality A & painting with two coat of black bitiminious paint over a coat of Red Oxide primer complete all as specified by Engr-in-Charge.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm

M&L for Point wiring complete with 1.5 sqmm single core PVC insulated and PVC unsheathed FRLS multistranded copper conductor cable 1100 volt grade enclosed in and including PVC casing and capping with accessories fixed on surface on walls/ceiling by means of PVC sleeves, Dash fastners and cadmium plated screws including sunken junction box not less than 3.0 mm thick concealed in wall, mounting accessories like switches, sockets fan regulators with 3.0 mm thick Laminated sheet top covers etc including 1.5 Sqmm single core multi stranded copper conductor PVC insulated and unsheathed cable as earth continuity conductor to common earth dolly forOne light point controlled by one switch complete all as specified and directed.

All as per item No.78 here in before but for One fan/ Exhaust fan point controlled by one switch complete all as specified and directed.

All as per item No 78 here – in – before but for one 3 / 5 -pin switch socket outlet 5 / 6 amps on independent board.

All as per item No 78 here – in – before but for one switch socket outlet 15/16 Amps on independent board with 2.5 Sqmm multi stranded and 2.5 Sq mm stranded (for earth) PVC insulated un-sheathed copper cable.

Supply and fix switch piano flush button, single pole, 5/6 amps, one way all as specified and as directed. Make : Anchor/Havells/Plaza

Supply & Fixing ceiling rose surface bakelite 65 X 50 mm three terminal all as specified and as directed. Make : Anchor/Havells/Plaza

Supply and fix switch socket combination 2 – in – one, 3 Pin / 5 Pin, 5 / 6 amps flush type all as specified and as directed. Make : Anchor/Havells/Plaza

Supply and fixing switch socket combination 2 – in – one 6 Pin , 5 / 16 amps flush type universal all as specified and as directed. Make : Anchor/Havells/Plaza

Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Make : Havells/Philips/Crompton

Supply and fixing LED light fitting 1x9W/10W bulkhead luminaries including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete including taking down old unsv fitting complete all as specified and directed.

S & F lamp holder,PVC/Polycarbonate type and back plate suitable for batten fitting.

S & F 9W LED Bulb suitable for B22 holder . System Efficacy should be > 85 lm/ W. PF > 0.9, The Lamp Should have Cool Daylight Color temp of 6500K, lumen output >800 lm. Make: Philips/Wipro/Crompton

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete

S&F Sheet metal enclouser Double door for MCB DB,s Phosphatised Powder Painted with bus bar 200 Amps rated Single pole and neutral linkof 4 way 240 Volts AC. Cat Part No 5076 11 of Make- Legrand or equivalent in Siemens/Schindler.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40 to 63 AMP poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. Cat part No 4086 18 of Make : Legrand or equivalent in Siemens/Schneider.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SP 6 To 32 AMP poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. Cat part No 4086 18 of Make : Legrand or equivalent in Siemens/Schneider.

M&L for Sub main wiring with FRLS two single core PVC insulated and unsheathed fire retardant multi stranded copper conductor cable 1100 volt grade IS-694, marked of 4.0 Sqmm size drawn through and including not less than 25/16 mm PVC cashing & capping medium grade ISI marked and conduit junction boxes, terminal boxes and incl all accessories fixed to the surface of wall/ceiling including one run of 4.0 sqmm PVC insulated and unsheathed FRLS multi stranded copper conductor cable for earth wire continuity conductor. NOTE : Two runs of single core 4.0 sqmm and one run of 4.0 sqmm copper FRLS cable as earth continuity conductor and suitable size cashing & capping with accessories shall be measured as one length.

M&L for Earthing in complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground ( earth pit not less than 2.25 m deep bellow ground level ) with top edge of the plate not less than 1.5 m bellow normal ground level, connected to galvanized earth lead wire 4 mm dia. by means of galvanized iron or steel bolts , nuts , check nuts and washers, and connected to equipments as directed , including funnel with GI med grade watering pipe 20 mm bore , wire mesh , charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode , with concrete pit in PCC 1 : 3 : 6 type C-1 , 50 mm thick pre cast RCC 1 : 2 : 4 type B-1 cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar ,GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance n.exc. 50 m and necessary testing complete all as shown on electrical plate No. 3 of MES SSR Part-I and as directed.

Supply and fix electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, includinginlet and outlet connecting pipe and electric connection complete all as specified and and as directed by Engr-in charge, Make : Usha/Racold/Bajaj

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers connecting up including provison of cable from ceiling rose to fan. Make : Crompton Greaves, Model : BRISK AIR , or equivalent in USHA/Bajaj.

Supply and Laying cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor on wall with the help of shadel of size 10 Sqmm 3.0 core as required at site.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspen?ded by insulating hangers not more than 1 metre apart including4mm suspension wire, one twin core cable flat or circular of cross sectional area 10 sqmm complete all as specified and direcetd.

Note : In case of doubling / duplicancy of BOQ items, the lowest quoted rate shall be applicable for payment

SUNIL PRADHAN (BID ID -3346346)

MANOJ JINDAL (BID ID -3347332)

PRASAD PRADHAN AND SON (BID ID -3347261)

HEM RAJ GURUNG (BID ID -3347344)

Sri Gupta Construction (BID ID -3343636)

ANTHONY PRADHAN (BID ID -3347260)

GEETA CONSTRUCTION (BID ID -3346920)