Addition/Alteration of Bldg No P-350, provision of change of wiring and change of aluminium windows of 175 MH at Mil Stn Abohar

Amount

SCHEDULE 'A' SECTION I (B&R Portion)

Dismantling of floor hearth or wall tiling including cement mortar bedding ( but not backing) and rubbish off the permices.

M&L glazed ceramic coloured (light colour as approved) 350x250x7/450x350x7mm thick on vertical surface such as skirting / dados set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over & including screed of 15 mm thick rendering in cement mortar (1:4) complete all as specified.

Taking down chowkhats or frames with shutters without taking off shutters from the frame exceeding 1.5 Sqm but not exceeding 4 Sqm each and all as specified .

S&F for powder quoted Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. Complete all as specified.

S&F powder quoted aluminium window and ventilator shutter side hung type without sash, aluminium sections weighing glazing clips, rubber packing anodised aluminium snap beading screws, anodised aluminium fittings such as peg stays 150 mm long (1 no) hinges type B-21 100 mm long (2 no) suitable handle (1 no) complete all as specified.

S&F aluminium anodised grill diamond shape 100 mm x 100 mm aperture of 6 mm dia round bars including necessary joining cleats, clips anodised aluminium snap beading screws complete all as specified as directed by Engineer-in-Charge.

S & F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm all as specified .

S & F 4 mm thick sheet glass ordinary quality with transpranent flim and glazing with rubber beading in square not exceeding 0.50 sqm in each pane all as specified .

Taking down cement plaster/dado on brick wall including racking out joints, hacking for keys scrubbing down with water all as specified.

M & L rendering 15mm thick on fair faces or other than fair faces of brick work in CM 1:6 finished even & smooth without using extra cement all as specified .

M & L rendering 15mm thick on fair faces of brick work in CM 1:4 finished even & smooth without using extra cement all as specified .

M & L two coats of cement base paint over new plastered surface including preparation of surface complete all as specified .

M & L Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified .

M&L for prepartion of newly plastered wall surfaces and applying two coat of oil bound distemper over 3 mm thick wall care putty over one coat clearcolle primer including all as specified and directed by Engr-in-charge.

SCHEDULE 'A' SECTION-II (E&M PORTION)

Taking down carefully any type point wiring (light,fan,socket or power) complete including fittings such as switches,ceiling roses, pendants, regulators ,sockets etc. and removing ( Except those to be reused shall be kept in safe custody at the site ) and making good disturbed surfaces of walls, floors etc.to match with the existing.

M&L point wiring (CONCEALED) for using 1.5 sqmm nominal cross sectional area copper conductor mutimultistranded ,PVC insulated unsheathed , FRLS cables in and including using PVC conduits not les than 20 mm dia and fittings, including pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multi-multistranded copper conductor , FRLS, green PVC insulated unsheathed earth wire and connecting to earth dolly using color code as per IS suitable for Hylemsheet/Modular fitting including terminal boxes suitable for fixing modular/normal switches, sockets and fixtures/accessories and making good all disturbed work to match the existing for One light/fan point controlled by one 5 Amps one way switch and all as specified and brass screws, washers etc. complete all as specified.

All as per Item No. 18 here in before but for One three pins 5 Amps switch socket outlet point on independent board

All as per Item No. 18 here in before but for One three pins 5 Amps switch socket outlet point on same board with other switches

All as per Item No. 18 here in before but for One light point controlled by two 2-way switches of 5 amps

All as per Item No. 18 here in before but for One bell point controlled byh one bell push

Description all as per item No 18 here in before but for 15 amps socket outlet with 2.5 Sqmm Copper incl 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed.

Description all as per item No 18 here in before but for 15 amps socket outlet with 4 Sqmm Copper incl 4.0 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed.

M & L point wiring with PVC FRLS insulated unsheathed multistranded copper conductor of size 1.5 Sqmm, 1100V grade in Existing concealed conduit, and one run PVC FRLS insulated unsheathed copper conductor of size 1.5 Sqmm as earth continuity wire and connected to common earth dolly using color code as per IS and all as specified with copper lugs/timbles inserted in existing MS boards/boxes complete heavy duty for housing switches, , regulators, bell push etc, and making good all disturbed work to match the existing for One light / fan point controlled by one way piano switch 5 Amp. and complete all as specified and directed.

All as per Item No. 25 here in before but for One three pins 5 Amps switch socket outlet point on independent board

All as per Item No. 25 here in before but for One three pins 5 Amps switch socket outlet point on same board with other switches

All as per Item No. 25 here in before but for One light point controlled by two 2-way switches of 5 amps

All as per Item No. 25 here in before but for One bell point controlled by one bell push

Description all as per item No 25 here in before but for 15 amps socket outlet with 2.5 Sqmm Copper incl 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed.

Description all as per item No 25 here in before but for 15 amps socket outlet with 4 Sqmm Copper incl 4.0 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed.

S & F in repairs switch piano one way 5/6 amps 240 volts complete all as specified and directed.

S & F switch piano one way 15 amps 240 volts complete all as specified and directed.

S & F Bell push AC, 50 Hz, 230 Volts, 5 amps complete all as specified.

S & F Bell ding dong AC, 230 Volts, Single pole complete all as specified.

S & F socket 5 in 1, 5 amps flush type complete all as specifeid.

S & F socket 5 in 1, 5/16 amps flush type complete all as specifeid.

S & F switch piano flush type 5 amps but 2 way type complete all as specified.

M & L lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings complete, Make- Anchor/SSK/CONA

M & L Ceiling rose, 3 terminals/phase type, fabricated of PVC/Polycarbonate, iwsolated body complete, Make-Anchor/SSK/CONA

S & F modular switch 1 way 6 amps, 1 module complete all as directed by Engr-in-chrage.

S & F modular switch 1 way 16 amps, 1 module complete all as directed by Engr-in-chrage.

S & F modular switch 2 way 6 amps, 1 module complete all as directed by Engr-in-chrage.

S & F modular bell push 6 amps, 1 module complete all as directed by Engr-in-chrage.

S & F modular sockets 6 amps, 2/3 pin combined two module complete all as directed by Engr-in-chrage.

S & F modular sockets 6/16 amps, 2/3 pin combined two module complete all as directed by Engr-in-chrage.

S & F modular white cover plate with frame, 1 module complete all as directed by Engr-in-charge.

S & F modular white cover plate with frame, 2 module complete all as directed by Engr-in-charge.

S & F modular white cover plate with frame, 3 module complete all as directed by Engr-in-charge.

S & F modular white cover plate with frame, 4 module complete all as directed by Engr-in-charge.

S & F modular white cover plate with frame, 6 module complete all as directed by Engr-in-charge.

S & F modular white cover plate with frame, 8/12 module complete all as directed by Engr-in-charge.

S & F modular flush metal box 1/2/3 module complete all as directed by Engr-in-charge.

S & F modular flush metal box 3 module complete all as directed by Engr-in-charge.

S & F modular flush metal box 4 module complete all as directed by Engr-in-charge.

S & F modular flush metal box 5/6 module complete all as directed by Engr-in-charge.

S & F modular flush metal box 8/12 module complete all as directed by Engr-in-charge.

S & F Modular Buzzer, Ding Dong AC. 230 volts, single pole

S & F Modular Bell, AC, 230 volts, single pole

S & F modular fan regulator, step type, 120 watts, W-2 module complete all as directed by Engr-in-chrage.

M & L for point wiring with Television co-axial cable in and including concealed PVC conduit (25 mm dia) and conduit accessories and metal flush box of one module with cover fixed with screw and cap washers for Television ponint and making good all disturbed work to match the existing and all as specified and directed (Make: Finolex/NICO/KDK for Television cable and make- Presto plast/Plaza for conduit)

M&L for modular type TV socket (Make: Carbtree, Cat No: ACAKTOW000)

M & L for point wiring with Telephone cables in and including concealed PVC conduit (20 mm dia) and conduit accessories and metal flush box of one module with coner fixed with screw and cap washers for Telephone point and making good all disturbed work to match the existing and all as specified and directed (Make: Finolex/NICO/KDK for Television cable and make- Presto plast/Plaza for conduit)

M&L for modular type Telephone socket (Make: Carbtree, Cat No: ACAKTOW000)

M&L for submain wiring comprising single core ,4 Runs of 10 sqmm nominal cross sectional area multimultistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade drawing in and including appropriate dia. in existing surface/recessed PVC conduits and conduit fittings not less than 25 mm dia complete, including provision of 2x6 sqmm nominal cross sectional area multimultistranded copper conductor cable PVC insulated unsheathed 1100 Volts grade as earth wire and using color code as per IS and specified and making good all disturbed work to match the existing complete incl taking down old UNSV sub main all as specified.( Note :- Extra length of cables/ wire required for connection to MCBs shall not be measured and the rate quoted by contractor for per unit shall be deemed accordingly)

M&L for submain wiring comprising single core ,4 Runs of 6 sqmm nominal cross sectional area multimultistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade drawing in and including appropriate dia. in existing surface/recessed PVC conduits and conduit fittings not less than 25 mmdia complete, including provision of 2x4 sqmm nominal cross sectional area multimultistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade as earth wire and using color code as per IS and specified and making good all disturbed work to match the existing complete incl taking down old UNSV sub main all as specified. ( Note :- Extra length of cables/ wire required for connection to MCBs shall not be measured and the rate quoted by contractor for per unit shall be deemed accordingly)

M&L for submain wiring comprising single core ,2 Runs of 6 sqmm nominal cross sectional area multimultistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade drawing in and including appropriate dia. in existing surface/recessed PVC conduit and its fittings complete including provision of 1X4.0 sqmm nominal cross sectional area multimultistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade as earth wire and using color code as per IS and specified and making good all disturbed work to match the existing complete incl taking down old UNSV sub main all as specified. ( Note :- Extra length of cables/ wire required for connection to MCBs shall not be measured and the rate quoted by contractor for per unit shall be deemed accordingly)

M&L for submain wiring comprising single core ,2 Runs of 4 sqmm nominal cross sectional area multimultistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade drawing in and including appropriate dia. in existing surface/recessed PVC conduit and its fittings complete including provision of 1X2.5 sqmm nominal cross sectional area multimultistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade as earth wire and using color code as per IS and specified and making good all disturbed work to match the existing complete incl taking down old UNSV sub main complete all as specified and directed by Engr-In-charge. ( Note :- Extra length of cables/ wire required for connection to MCBs shall not be measured and the rate quoted by contractor for per unit shall be deemed accordingly)

M & L cutting chases, pinning in, making god to facings where reuired and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc ; and cutting chases for concealed water tubing or concealed wiring etc, and making good, cutting not exc 10 cm girth in brick walls complete all as directed by Engr-in-charge .

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium standard conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed stranded conductor of 2 core 10 sq. mm nominal cross section in service connections complete all as specified and directed by Engr-In-charge.

M&L for LED tube light fitting of LED T5 tube lights (6500K) environomental freiendly energy efficient of 18/20 Watt LED including electric connection with PVC copper flexible twin core cable, 1.0 sqmm from ceiling rose to light fitting complete all as specified and directed by Engr-In-charge. Make:Syska SSK-SQ2001 20W or equvalent of Havells/Crompton Greaves/ Philips/Wipro/Polycab as recommended by Engr-Incharge and approved by GE.

S & F LED street light luminaitres 20/25 watts with IP66 complete with pressure dia cast aluminium housing with GI pipe bracket made out of 25 mm dia medium grade pipe (60 cm long) bend to shape including fixing arrangement to wall with MS flat 25x3mm-2 Nos by nut, bolts and washers including electric connection with PVC copper flexible twin core cable 1.0 sqmm from ceiling rose to light fitting complete all as specified and directed by Engr-In-charge. Make:Syska max glow series SSK-ST25W-MG or equvalent of Havells/Crompton Greaves/ Philips/Wipro/Polycab as recommended by Engr-Incharge and approved by GE.

S & F LED street light luminaitres 15 watts with IP66 complete with pressure dia cast aluminium housing with GI pipe bracket made out of 25 mm dia medium grade pipe (60 cm long) bend to shape including fixing arrangement to wall with MS flat 25x3mm-2 Nos by nut, bolts and washers including electric connection with PVC copper flexible twin core cable 1.0 sqmm from ceiling rose to light fitting complete all as specified and directed by Engr-In-charge. Make:Syska max glow series SSK-MST 15W or equvalent of Havells/Crompton Greaves/ Philips/Wipro/Polycab as recommended by Engr-Incharge and approved by GE.

Material and labour for brackets suitable for building security light fittings made out of light grade 20 mm dia GI tubing bent to shape of up to 2.5 meter length complete with aluminium painting of two coat and necessary nuts, bolts and clamps including taking down old unserviceable compelete all as directed by Engr-in-charge.

M&L for LED Batten with LED tube light integrated LED channel of capacity 05 Watt white colour complete all as specified and directed by Engr-In-charge. Make:Bajaj BCLSB 05WH or equavlent of Havells/Crompton Greaves/ Philips/Wipro/Syska/Polycab as recommended by Engr-Incharge and approved by GE.

M&L for LED Batten with LED tube light integrated LED channel of capacity 10 Watt white colour complete all as specified and directed by Engr-In-charge. Make: Bajaj BCLSB 10WH or equvalent of Havells/Crompton Greaves/ Philips/Wipro/Syska/Polycab as recommended by Engr-Incharge and approved by GE.

M&L for Skylux LED efficient LED surface 2'x2' luminaire & glare free soft illumination of capacity 36Watt LED white colour complete all as specified and directed by Engr-In-charge. Make:Bajaj BZSSQL 36W LED WH or equvalent of Havells/Crompton Greaves/ Philips/Wipro/Syska as recommended by Engr-Incharge and approved by GE.

M&L for sleek surface mounted square LED downlight of capacity 15 Watt with AL die-cast body, finish with drop down PC diffuser to deliver low glare illumination with optimized heat sink for efficient heat dissipation complete all as specified and directed by Engr-InCharge Make:SYSKA SSK_SDS15W (SQUARE/CIRCLE) or equivalent in Havlls/Bajaj/Crompton Greaves/ Philips/Wipro as approved by GE.

M&L for Galaxy LED suspended type decorative LED low bay luminaasire white colour of capacity 24 Watt complete all as specified and directed by Engr-InCharge Make: Bajaj BLSPD LED 24W WH or equivalent in Havlls/Crompton Greaves/ Philips/Wipro/Syska as approved by GE.

M&L for WEE Plus LED bulk head luminaire of capacity 10 Watt an ideal energy efficient solution for upgrading conventional GLS bulkhead luminaires to LED bulk head IP 65 complete all as specified and directed by Engr-InCharge Make: Bajaj BIBWP LED 10W WH or equivalent in Havlls/Crompton Greaves/ Philips/Wipro/Syska as approved by GE.

Dismantling of existisng unserviceable MCB distribution board and S&F sheet metal enclouser TPN DB having facility to fix MCCB in incomer upto 125Amps and MCBs in outgoing, TPN 4 ways, Double door type complete fitted with bus bars, neutral links, IP-54 protection Isolated Neutral bar,door earthing,cement spill ptorector and blanking plates including making good disturbed surfaces complete all as specified and directed. make- Legrand/L&T Hager/C&S/INDO KOPP/Indo Asian/Standard/Havells

All as per Item No 81 above here-in-before but TPN DB 6 Way double door type complete all as specified and directed make- Indo Asian Model No: 811894 or equvalent makes of- Legrand/L&T Hager/C&S/INDO KOPP/Indo Asian/Standard/Havells

All as per Item No 81 above here-in-before but TPN DB 8 Way double door type complete all as specified and directed. make- Indo Asian Model No: 811895 or equvalent makes of- Legrand/L&T Hager/C&S/INDO KOPP/Indo Asian/Standard/Havells

All as per Item No 81 above here-in-before but TPN DB 12 Way double door type complete all as specified and directed. make- Indo Asian Model No: 811896 or equvalent makes of- Legrand/L&T Hager/C&S/INDO KOPP/Indo Asian/Standard/Havells

Dismantling of existisng unserviceable MCB distribution board and S&F sheet metal enclouser SPN DB having facility to fix MCB in incomer and MCBs in outgoing, SPN 12 ways, Double door type complete fitted with bus bars, neutral links, blanking plates including making good disturbed surfaces complete all as specified and directed. make- Legrand/L&T Hager/C&S/INDO KOPP/Indo Asian/Standard/Havells

Dismantling of existisng unserviceable MCB distribution board and S&F sheet metal enclouser SPN DB having facility to fix MCB in incomer and MCBs in outgoing, SPN 8 ways, Double door type complete fitted with bus bars, neutral links, blanking plates including making good disturbed surfaces complete all as specified and directed. make- Legrand/L&T Hager/C&S/INDO KOPP/Indo Asian/Standard/Havells

Dismantling of existisng unserviceable MCB distribution board and S&F sheet metal enclouser SPN DB having facility to fix MCB in incomer and MCBs in outgoing, SPN 4 ways, Double door type complete fitted with bus bars, neutral links, blanking plates including making good disturbed surfaces complete all as specified and directed. make- Legrand/L&T Hager/C&S/INDO KOPP/Indo Asian/Standard/Havells

Supply and fixing Plug and socket type DB (Functional Unit) 20 Amps capacity with provision of single pole 20 amps MCB, plug top and earth plug, grouted flush to walls complete all as specified. Make-Legrand/L&T Hager/C&S/INDO KOPP/Indo Asian/Standard/Havells Schneider/C&S)

Supply and fixing MCCB TPN 63 Amps 415 Volts of braking capacity 36 KA (Adjustable Thermal and Adjustable Magnetic Release Setting) complete taking down old unserviceable one and making necessary connections as existing and cleaning the terminals with CTC solutions complete all as specified and directed. Make : Havells/Legrand/IndoAsian/Schneider/HPL/Standard

All as per Ser Item No 89 but 100 Amps with braking capacity 36 KA.

All as per Ser Item No 89 but 125 Amps with braking capacity 36 KA.

Supplied and fixed Miniature circuit breaker (MCB), single pole, 240 Volts, of 6-32 amps current rating and 10 KA breaking capacity, B' series type complete all as directed by Engr-in-charge. Make-Legrand/L&T Hager/C&S/INDO KOPP/Indo Asian/Standard/Havells/ Schneider/C&S)

Supplied and fixed Isolator TPN, 415 Volts, of 63 amps current rating complete all as directed by Engr-in-charge. Make-Legrand/L&T Hager/C&S/INDO KOPP/Indo Asian/Standard/Havells/ Schneider/C&S)

Supplied and fixed Isolator TPN, 415 Volts, of 100 amps current rating complete all as directed by Engr-in-charge. Make-Legrand/L&T Hager/C&S/INDO KOPP/Indo Asian/Standard/Havells/ Schneider/C&S)

Supplied and fixed Isolator, Double pole, 240 Volts, of 32 amps current rating complete all as directed by Engr-in-charge. Make-Legrand/L&T Hager/C&S/INDO KOPP/Indo Asian/Standard/Havells/ Schneider/C&S)

Supplied and fixed Isolator, Double pole, 240 Volts, of 40 amps current rating complete all as directed by Engr-in-charge. Make-Legrand/L&T Hager/C&S/INDO KOPP/Indo Asian/Standard/Havells/ Schneider/C&S)

Supplied and fixed Isolator, Double pole, 240 Volts, of 63 amps current rating complete all as directed by Engr-in-charge. Make-Legrand/L&T Hager/C&S/INDO KOPP/Indo Asian/Standard/Havells/ Schneider/C&S)

M&L for Earthing complete with GI earth plate electrode of size 600x600x6 mm thick buried directly in ground with earth pit not less than 2.25 meter deep below ground level with top edge of plate not less than 1.5 meter below normal ground level connected to GI wire 4 mm dia earth lead by means of nuts, bolts, check nuts, washers of galvanised iron as steel, protected by galvanized iron pipe 40mm bore (Medium grade) all as directed including cement concrete (1:3:6) type C-1 earth pit with precast RCC (1:1.5:3) type A-1 cover slab of size 42 x 42 x10cm thick reinforced with 8mm dia TMT bars @ 15 cm c/c both ways with 10mm dia mild steel round bar of 30 cm long, bent to shape as lifting handle, funnel, wire mesh, 20 mm bore galvanized iron pipe (medium grade) for watering, earth testing point, charcoal or coke and salt in alternate layers with necessary earth work in soft/loose soil complete all as shown in electrical plate No 3 of SSR Part I including testing on completion all complete as specified and directed after taking down old earthing.( GI wire upto 7.5m including testing consider in this item).

Suuply and fixing on load change over switches 4 pole in sheet steel enclosure of 125 amps complete all as specified and directed Make: Make-Indoasian Cat: ITAS0063 or equvalent of Legrand/L&T Hager/C&S/INDO KOPP/Indo Asian/Standard/Havells/ Schneider/C&S)

Taking down/ dismantling complete ceiling fan of size 1200/1400 mm sweep down rod with its canopies, shackle, condenser housing with its rubber bushes, split pins, unscrewing the body parts of ceiling fan,cutting the unserviceable winding of starter, rotor and taking out ball bearing, gun metal bush etc. complete to carry out the following repairs :- (a) Removing of burnt out fan winding and re-winding of motor with suitable size of copper enamelled wire, varnishing, heating as per manufactures design and directed and re-assembling and painting of ceiling fan by scraping/removing old spray paint with brush/emery paper and spray painting with two coat of synthetic enamelled paint complete ceiling fan fixing only old/new spare parts (i.e.) rubber bush of shackle and condenser housing, condenser, gun metal bushes, ball bearing, twin twisted copper cable, etc complete all as specified and directed by Engineer-in-charge. (Note :- 1. Ball bearing and Gun metal bush are measured and paid separately as supply only rates and minor spares like condensor, rubber bush shackle,holder deemed to beinclude in quoted rates). 2. Repair/Rewinding of fan shall be carried out in MES yard to bring adequate winding machine,tools & plants and necessary motor winder at site as directed.

All as per Item No.100 here-in-before but exhaust fan of size 220/250/300/380/450 mm sweep.

Taking down ceiling fan of 1200/1400 mm sweep by unscrewing nut/bolts from its position and fixing the same to its original place after necessary cleaning, oiling, greasing, servicing/overhauling and replacement of bush, bearing, condenser and including painting of ceiling fan by scraping/removing old spray paint with brush/emery paper and spray painting with two coat of synthetic enamelled paint complete all as specified and directed and marking MES number ass as directed by Engr-in-Charge. (Note :1. Bush, ball bearing are measured and paid separately as supply only rates and minor spares like condensor, rubber bush shackle,holder deemed to be include in quoted rates ) 2. Repair/Servicing of fan shall be carried out in MES yard to bring adequate winding machine,tools & plants and necessary motor winder at site as directed.

All as per item No 102 here in before but exhuast fan 220/250/300/380/450 mm sweep complete all as specified and directed and marking MES number ass as directed by Engr-in-Charge

Supply only ball bearing number of 6201/6202/6203/6204 as required complete all as specified and directed. (Make : SKF/NBC).

Supply only gun metal bush as per existing specification and make as per sample and confirming to ISI complete all as specified and directed.

S&F for Condenser 2/2.5/3.15.4.0 MFD as per existing capacity and make as per sample and confirming to ISI complete all as specified and directed. (Make : Universal/Standard/Jyoti/Usha)

Supply and fixing exhaust fan Louvers GI/MS/PVC suitable to size as per exising fans 220/250/300/380/450 mm complete all as specified and directed

Supply and fixing fan regulator electronic (socket) type, single phase, 230Volt complete all as specified and directed Make: Anchor/Cona and equivalent make

Fixing only serviceable lightfitting/tube light/bldg street light fitting of any type and capacity retrived from existing surface for re-use all as specified and directed

Fixing only serviceable MCB's with MCB DB's of any type and capacity retrived from existing surface for re-use all as specified and directed

Fixing only serviceable ceiling fans/exhaust/wall mounted fans of any type and capacity retrived from existing surface for re-use all as specified and directed

Fixing only serviceable geyser/AC's of any type and capacity retrived from existing surface and re-use with suitable nuts,bolts and washers with clamping arrangment complete all as specified and directed.

Fixing only serviceable switch, socket,ceiling rose,holder,regulator & bell/bell push etc of any type and capacity retrived from existing surface for re-use complete all as specified and directed.

Taking down/ dismantling of defective/rusted storage type hot water Geyser of 50/35/25 Ltr capacity from different locations by disconnecting inlet/outlet connections and taking out unserviceable parts by unscrewing bolts and nuts, de-scaling/cleaning inner shell, servicing etc. Checking defects, re-assembling and re-installing the Geyser in position, connection and testing complete.

M&L for painting of Geyser complete in site by scraping/removing old spray paint with brush/emery paper and spray painting with two coat of synthetic enamel paint of white colour and marking MES number with synthetic enamel paint of black colour in good and proper size all as directed by Engineer-in-Charge.

S&F for GI tubing 15mm bore (medium grade) with all fittings and fixed complete to wall, ceiling with all fitting arrangement and ceiling connection with the existing Geyser as in repair. (Make : Jindal/Prakash/Surya)

S&F cable end jointing kit for LT, 1100 Volt (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3.5/4 core XLPE armoured aluminium conductor cable of size 16 to 50 sqmm. Make: Denson/3M

S & F BLDC (brushless direct current) Motor Ceiling fan 1200 mm sweep 5 star rating , single phase 240 volts, power consumption 26 Watt to 32 Watt on turbo mode with remote control, 220 CUM/Min. single phase, 50Hz. 240 volts warranty 2 years on product complete and accessories. Make: Atomberg Gorilla/Havells Efficiencia Neo/Crompton/ White or equvalent of CG/Luminous/Orient

Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3½ core

All as per item 119 here in before above herein before but the size 50 sqmm 3.5 core

Excavation in trenches not exceeding 1.5 mtr depth width and not exceeding 1.5m depth for laying under ground cable in loose/soft soil.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm.

Removal of surplus soil obtained from excavated material not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point.

M&L for sand cushioning for protection of PVC cable with screen wash river sand and punning to proper required cover.

M&L for bricks of sub class ‘B’ bricks, for cable protection in trenches laid dry and flat.

M&L for PCC preparation including cutting up to 45 cm width and depth of the road/hard standing and making good disturbed surfaces by using PCC type C2(1:3:6) by using 40mm graded stone aggregate for the fixing the pipe/laying cables complete all as directed by the Engr. in Charge.

S & F Geyser storage type, electric driven of capacity 25 Ltrs 5 star rating, with 8 bar pressure with standing ,rust proof, rust proof fire retardant cable adj thermostat anti corrosion protective device inner tank mild steel with glass lined coating including PVC connections and grouting of bolts with nut of suitable size including cement work for make good the disturbed surface etc complete all as specified and as directed .Make:: Bajaj cat No Caldia or equavalent in CG, Havells,

S&F Exhaust fans (Heavy duty) 450 mm sweep 230/240 volts single phase with self closing louvers GI off mode protection against birds etc and provision of cutting of walls suitabully for fixing exhaust fan and necessary plastering and making good the disturbed surface to match with existing complete all as specified. Make: Havells ventilair DB 300 mm or equvalent of Orient/Usha/

M&L for 40mm dia steel tubes (light grade) galvanised with fittings, laid in trenches/wall for protection of underground earth strip when crossing the road/fixing on wall as in repair complete all as specified and directed. (MAKE: JINDAL/PRAKASH/SURYA)

M&L for 50mm dia steel tubes (light grade) galvanised with fittings, laid in trenches/wall for protection of underground earth strip when crossing the road/fixing on wall as in repair complete all as specified and directed. (MAKE: JINDAL/PRAKASH/SURYA)

Taking out faulty underground 1100 volt grade LT cable of different sizes by excavation and removing bricks of any size and relaying in the same trenches or rerouting after rectification of fault or replacing faulty portion of cable with new cable and removing of surplus soil and using new bricks as required complete all as specified and directed. Note:1. New LT cable replace with fault portion ,joints shall be measured and paid separately under respective items of the schdule. 2. Retrived old serviceable bricks will be laid in trenches for cable protection. if extra bricks and sand required at site shall be measured and paid separately under respective items of the schdule. 3. Earth work and excavation will be measured and paid separately under respective items of the schdule.

M/s GURFATEH BUILDERS

RS ENTERPRISES