construction of pumping main from Rajupeta vaguto 20 KL ohsr at laxminarsapur 10 KL OHSR at upparacolony 20 KL OHSR at Kannaigudem30kL OHSR at Vijayraopeta at Mangapeta

Supply and Deleviery of HDPE Pipe line as per IS:4985/1988,with its amendments and revisons thereon including supplying of pipes, specials as per equirements Excluding all Taxes.

E/w excavation in loamy, clayey soils like B.C soils red earth and ordinary gravels for pipe line trenches of size (0.70x1) and depositing on banks with an initial lead of 10m and lift of 2m including lowering,laying,jointing of pvc pipes into the readymade trenches and true to the alignment and gradient,refilling thetrenches with excavated earth etc., complete.

Supply and delivery and DI D/F Gate valves ( soft Seated ) valves conforming to IS 3896-oart 2-1985 wedge fully rubber lined with EPDM food grade quality and the valve should be of vacuum tight and 100% leak proof with face to face dimensions. All the valves should be with Electrostatic powder caoting both insisde and outside pockets body passages.Drilled as per IS: 1538

Fixing of DI D/F Gate valves ( soft Seated ) by Jointing DI Specials to suit the pressure class of pipe and constuction of RCC valve chambers as per requirement with VRCC side walls,slab and RCC manhole cover with locking arrangements including cost conveyence of all materials for construction of valve chamber and Jointing materials, and labour charges etc. complete for finished item of work but excluding cost of DI D/F Gate valves(soft Seated) its CED, as specified in Technical specifications.but including seignoarge charges ,cost of specials & Contractors profit but excluding VAT, labour cess , NAC income tax , QC etc 80mm dia on 75mm

Fixing of DI D/F Gate valves ( soft Seated ) by Jointing DI Specials to suit the pressure class of pipe and constuction of RCC valve chambers as per requirement with VRCC side walls,slab and RCC manhole cover with locking arrangements including cost conveyence of all materials for construction of valve chamber and Jointing materials, and labour charges etc. complete for finished item of work but excluding cost of DI D/F Gate valves(soft Seated) its CED, as specified in Technical specifications.but including seignoarge charges ,cost of specials & Contractors profit but excluding VAT, labour cess , NAC income tax , QC etc 80mm dia on 75mm

Drilling of 6 1/2" DTH Bore Well in all strata including fixing casing pipes etc. complete

Cost of 180 mm dia PVC Plain Casing pipe of 6Kg/cm2

Cost of 180 mm dia PVC Slotted Casing pipe of 6Kg/cm2

Geologist Charges

Supply and Transportation of star rated Three phase ISI submersible motor pumpset suitable for 6" Bore well.

Supply and Transportation of control panel for three phase submersible motors up to 7.5 HP @ 415V 50Hz operating fitted with supply and fixing of Direct - on - Line LTLK (L&T) /BCH/ SIEMENS / CROMPTON make, 0-500V Volt meter and 0-30A Ammeter, Indication lamps, selector switches, CTS, 32A TP MCB, Single phase preventor,suitable contactor to with stand low voltage pick up and high voltage resistant, with ISI marked capacitors assembled with ISI mark contactors and fitted with Legrand make ISI mark MCB etc., complete.

Supply and delivery of UPVC Raising Column Pipes for submersible motors with both ends square threaded, with rubber 'O' rings with smooth inner surface which can take the minimum load of 2100 to 4000 Kgs weights Nominal diameter of Standard 60/50 mm UPVC pipe with standing upto 20 Kgs / CM2 upto 200 Mts

Supply, Transportation and fixing of Seamless cast iron adopter assembly (Two Nos at bottom of the pipe to coupling to the pump set and the other at top end of the pipes) for installing the pump set with pipes including cost and conveyance of all materials, taxes etc., complete.

Supply of WPSC (Weather Proof Single Core) ISI Alluminium Wire.

Supply of 3 Core Flat Copper cable of ISI for Submersible Motors.

Supply, Transportation and fixing of __ 450mm length, 12mm thickness and 75mm wide MS Clamp set with required nuts and bolts.

Supply and Delivery of 150 mm dia Galvanized bore cover

S& F 50 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings &labour charges complete

Supply, Transportation and fixing of ___ 90 degree bend with length of 20cm (Center to face) galvanised GI bends heavy duty with threaded at both ends for installing the pump set including cost and conveyance of all materials, taxes etc., complete.

Supply, Transportation and fixing of following MS threaded Flanges 2 Nos with nuts and bolts including cost and conveyance of all materials, taxes etc., complete.

Supply, installation, testing and commissioning of C.I. non - return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc as required

Erection and transportation of pumpset

Supply and Fixing od Air Valve