8350 PERIODICAL SERVICES AND CERTAIN MISC REPAIR WORKS INCLUDING FLOORING, TILING, PLASTERING, SANITARY, PLUMBING, JOINERY, ROOF REPAIR ETC IN MD ACCN OF B WING OF DAD COMPLEX LULLANAGAR AREA UNDER AGE BR I SOUTH PUNE

Amount

M&L for Complete removal of existing treatment, washing, scrubbing down, preparing and providing one coat of primer and two coats of oil bound distemper on walls complete all as specified and as directed.

M & L for complete removal of existing treatment and applying 2 Coats of OBD on Ceiling Surfaces complete all as specified and as directed.

M & L for preparation of old distempered surfaces of wall including washing rubbing down and stopping distempered surfaces and applying one coat of oil bound distemper ( White or tinted ) complete all as specified and as directed.

Complete removal of existing treatment and applying two coats of cement base paint white or tinted, on walls, complete all as specified and as directed.

M & L for two coats of synthetic enamel paint on wooden surfaces of any description not otherwise discribed over 10 cm width of girth including preparation of old painted surfaces complete all as specified and as directed.

M & L for two coats of synthetic enamel paint on steel surfaces of any description not otherwise discribed over 10 cm width of girth including preparation of old painted surfaces complete all as specified and as directed.

Taking down cement plaster on brick/ block walling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M & L for Rendering 10mm thick in cement mortar 1:6 on brick/concrete surfaces finished even & smooth with a thin layer of sagol complete all as specified and as directed.

M & L for 5 mm thick rendering in cement mortar (1:3) on ceiling surfaces and finished even and smooth without using extra cement complete all as specified and as directed.

M & L for Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M & L for preparation of newly plastered surfaces and applying 2 Coats of OBD over a coat of primer on Ceiling Surfaces complete all as specified and as directed.

S & F in repair 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete including dismantling of old pipes complete all as specified and as directed.

All as per Ser. item No. 12.00 above but 110 mm bore complete all as specified and as directed.

S & F in repair 75 mm bore PVC (SWR) bends any radius complete all as specified & directed.

All as per Ser. item No. 14.00 above but 110 mm bore complete all as specified and as directed.

S & F in repair 75 mm bore PVC (SWR) bends any radius provided with access door complete all as specified & directed.

All as per item No. 16.00 above but 110 mm bore complete all as specified and as directed.

Pruning of vegetation and plants growth on the external wall surfaces/roofs and applying Hydrochloric acid on the left over root portion and making good disturbed portion with CM 1:4 or PCC 1:2:4 grouting and finished with two coats of cement base paint to match the existing colour shade. complete all as specified and as directed. (Note : Rates to be inclusive of necessary scaffolding up to G+3 height.)

S&F in repairs, PVC cover for water storage tank of any Capacity with locking arrangements complete all as specified and as directed

M & L for Cleaning and removing all dirt and scale etc from tank and from the mouths of circulating pipes for the tanks of following capacity complete all as specified and as directed.

tank not exc. 500 Ltrs

tank exc. 500 Ltrs but n.exc 1000ltrs

Demolition of cement concrete in ground floors & paving not exc. 15cm thickness (below or above ground level) complete all as specified and as directed.

M&L for Cement concrete 1:4:8 type D- 2, (40 mm graded aggregate) 75mm thick as sub base of floor complete all as specified and as directed.

M&L for coloured precast cement concrete interlocking tiles 60mm thick, of any shape and size, conforming to IS-15658-2006 glossy finish as in floor/pavement laid on and including 50mm thick stone dust cushioning, laid dry to the profile over rammed earth/murrum filling complete all as specified and directed

M&L for 75mm thick PCC 1:3:6 type C1 (20mm graded stone aggregate) as in plinth protection,path, hard standing etc laid in pannels including finished the surface smooth and even without using extra cement complete all as specified and as directed.

S&F stainless steel plate rack made of 1.00 mm thick sheet grade SS- 304 of standard size 30"x32"x8"/10" and of approved quality of finish all as spd and directed and of ISI mark complete all as specified and as directed.

Taking down / cutting steel window shutters by means of gas cutter without disturbing of soffit / jambs / cills etc. of any description n.exc. 1.5 sqm (without taking off guard bars) complete all as specified and as directed.

S&F in repair three track sliding window with two or more shutter witth 4 mm thick tinted glass , one shutter of stainless steel wire cloth 0.36 mm nominal dia & 1.18 mm width aperture for mosquito proofing with good quality bearing, handle lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified directed by Engr-in-Charge. (a) Bottom frame 20620 (b) Top frame & Verrtical 20621 (c) Handle (side) 20606 (d) Shutter inter lock 20724 (e) Shutter top & Bottom 20844 (f) Glazing Clip 19352

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for coloured glazed Ceramics tiles 450x300x7to8mm thick in vertical surfaces such as skirting dado set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick rendering in cement mortar 1:4 on stone / brick/ concrete masonry surfaces complete all as specified and as directed.

M&L for Non skid ceramic colored tiles 7 to 8mm thick, (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floor etc.set and jointed in neat cement slurry & pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer as in CM 1:6 complete all as specified and as directed.

M&L for Non skid ceramic colored tiles 7to8mm thick, (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floor etc.set and jointed in neat cement slurry & pointed in white or coloured cement to match.including 15mm thick screed bed or bedding layer as in CM 1:6 complete all as specified and as directed.

Demolition of stone slabs and tiles of any description of thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and as directed.

M & L for granite ( of any type ) work ( table rubbed and polished ) 18 to 20 mm thick in steps, jambs, pillars, window cill , cooking platform and flooring in CM 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite with and including screed bed or bedding layer 15 mm thick, in CM 1:6 on stone masonry surfaces complete all as specified and as directed.

M&L for Machine cut cudappah stone slab 20mm to 25 thick, over cement screed base laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and as directed.

Taking up or down steel tubing 15 mm bore & connections complete all as specified and as directed.

S & F 15 mm GI tubing medium grade with all fittings & fixed complete to walls / ceiling or laid in floors all as specified & as directed

Taking up or down steel tubing 20 mm bore & connections complete all as specified and as directed.

S & F 20 mm GI tubing medium grade with all fittings & fixed complete to walls / ceiling or laid in floors all as specified & as directed.

S & F in repairs vitreous china squatting Pan " Orissa " pattern of size 580 mm X 440 mm white with integral foot rests ( excluding flushing cistern and flush pipe) including provn of cement concrete bedding complete .

S & F in repairs vitreous china wash down water closet pan ( pedesal pattern ), white including connection to drain ( or outgoing pipe ) and to flushing pipe with and including S & F plastic water closet seat white closed pattern with flat bottom, cover and mild steel hinging device.

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S & F in repairs wash hand basins, vitreous china of size 550mm X 400mm ( flat back or angle back type) including cutting for and pinning in ends of brackets or erecting stand inclusive of supply and fixing waste pipe etc. complete.

S & F 15 mm bore pillar taps,fancy type swan neck spout (Left) and aerator, cat No. F2002104 of CERA or of equivalent make specified here-in-after complete.

S & F in repair 15 mm bore pillar taps, fancy type cast copper alloy with capstan heads, chromium plated , screwed down high pressure with or without lattered " HOT" or " COLD" with long screwed shanks and fly nuts complete all as specified and as directed.

S & F in repairs 15 mm bore bib taps,fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repairs 15 mm chromium plated 2 way bib cock with wall flange confirming to CAT No. F2002161 of " Cera" or of equivalent make specified here in after.

S & F 32 mm bore waste fittings brass chromium plated with long screwed shanks and fly nuts,screwed for iron pipe complete all as specified and as directed.

S & F in repairs 15 mm bore, 600 mm long PVC connections with PTMT nuts complete fixed to iron pipe at both ends complete all as specified and directed.

S & F in repairs 15 mm stop valves, fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed both ends for iron pipe or for union complete all as specified and directed.

All as per Ser. item No. 49.00 above but consealed long shank complete all as specified and as directed.

S & F in repairs 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, including flush pipe 32 mm bore complete all as specified and as directed.

S & F gratings 100 mm dia of PTMT ( minimum wt 25 gms) complete all as specified and as directed.

S & F in repairs 125 mm dia swivel type brass chromium plated shower rose of approved quality complete all as specified and as directed.

S & F in repairs for health faucet including flexible cod confirming to CAT No. ALD-573 of make- Jaquar or equivalent specified here-in-after

Dismantling water tanks of capacity not exc. 250 Ltrs and not exc. 500 ltrs removing to stores complete all as specified and as directed.

S&F rotational moulded polythylene 500 ltr capacity water storage tanks of tripple layers (cylindrical vertical with colsed top) hoisted and fixed in postion complete all as specified and as directed.

S&F PVC box type cabinet of approx size 35 x 40 x 12 cm with 3mm thick mirror mounted on shutter, with PVC shelves 2mm thick and outer frame having 4mm thickness fixed in existing opening with wooden plugs including taking down existing Make :- ATUL, Commander or equilvalent.

S & F Transparent Glass 7.5 x 7.5 inch corner bathroom shelves with bracket (set of 2) (Model- Joyo Cera Gls 132) complete all as specified and as directed.

S & F in repairs brass chromium plated Tubular towel rail 20mm dia "D" type 60cm long complete all as specified and as directed.

Taking down wooden door shutter not exc. 1.00 sqm each and refixing in including resecuring or easing etc. the same opening complete all as specified and as directed.

Taking down wooden door shutter exc 1.00 but not exc 2.00 sqm each and refixing, including resecuring or easing and adjusting the same opening complete all as specified and as directed.

S&F aluminium powder coated fancy type curtain rod 25mm bore complete all as specified and as directed.

S & F aluminium powder coated brackets suitable for 25mm bore curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc and match with complete all as specified and directed by Engineer-in-Charge.

Taking down shutters of any description exc 1 sqm but n.exc. 2 Sqm each & removed to store complete all as specified and as directed.

Taking down chowkat/frame with shutters (without taking off shutters from the frame) exc 1.5 sqm but n exc 4 sqm all as specified and as directed.

S & F pressed steel door frames of size (105 X 60mm) with one or more rebates including necessary lugs, hinges, lock strikes plate, incl M & L for providing PCC type B-0 ,1:2:4(using 12.5 mm graded stone aggregate) to fill up the hollow portion of the frame including making good the disturbed surface complete all as specified and directed by Engr -in- Charge.

Dismantling boarding, any description, fixed in any position with screws complete all as specified and as directed.

M&L for 18/19mm thick prelaminated particle board both side decorative face, including providing second class hard wood 6mm thick beading for edges of board alround all as specified and directed by Engr in Charge.

M&L for 12mm thick prelaminated particle board one side decorated choice laminated and other side balancing white lamination for replacment of panels of aluminium partition or panels of aluminium doors all as directed by Engr in Charge.

M&L for Plain fillets exc 6 & not exc 13 sq.cm, square, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and as directed.

Fixing only 12mm thick prelaminated particle boards complete all as specified and as directed.

S&F brass Locks, cupboard, grade I, size 65 mm (2 lever) with two keys complete all as specified and as directed.

S&F 30 mm thick Flush shutters, solid core construction, with particle board core and one face is covered with decorative face veneer with lipping/frame to match, supplied and fitted to chowkats complete all as specified and as directed

S & F in repairs hasp and 100mm size staple aluminium anodised safety type with MS hinges pin including bolt to hinge plate and fixed with screw complete all as specified and as directed.

S & F 30 mm thick IInd class hard wood glazed and skeleton shutters, devided into squares with plain, chamfered or rounded mitered and rebated sash bars any numbers, open rebated prepared to receive guaze, edges of framing plain, chamfered or rounded , fitted with cut and mitered beads for securing glass etc size of members of shutters in SSR Part- I, Section 8, Clause 8.24 (a)

M & L preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S & F stainless steel wirecloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm & fixed with stainless steel wire stapples.

S&F of 200mm long Al anodised barrel tower bolt of extruded section complete all as specified and as directed.

S&F of MS sliding door bolts, stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of six bolts and nuts for a bolt plate and two on staple plate of size of 250 mm long complete all as specified and as directed.

S&F of MS butt hinges, medium weight cold rolled of size 100mm complete all as specified and as directed.

S&F of 125mm mild steel pressed handles, oval type, stove enamelled black complete all as specified and as directed.

Taking down shutters of any description not exc. 1 Sqm each & removed to store complete all as specified and as directed.

Taking down chowkat/frame with shutters (without taking off shutters from the frame) n.exc 1.5 sqm all as specified and as directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet, reinforced with M.S square tube, supplying & fixing in opening as per specifications, drawings complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting, of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat molded plain co lour PVC ‘C’ channel having a PVC sheet strip of 20mm width struck inside with solvent cement for steel & plain co lour PVC sheets for top rail, lock rail& bottom rail on either side & or gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stile & rails with suitable PVC sheet banding, and joints to gather with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

S&F Aluminium handles 125mm size cast type anodised complete all as specified and as directed.

S&F aluminium anodised barrel tower bolts 150mm long all as specified and as directed.

S&F of 100mm long stainless steel butt hinges medium weight and fixed complete all as specified and as directed.

Hacking out old broken glass (any thickness size, quality or description ) from wooden/ metal frames and M & L for sheet glass 3mm thick ordinary quality and glazing with oil puttyor fixed with beads, each pane not exc 0.5 Sqm in area complete all as specified and as directed.

SARATH ENTERPRISES

M/s.BAJRANG CONSTRUCTION

R k construction

L.K.R.TIWARI CONSTRUCTION