Trans Installation of Localizer and Glide path Huts at Madurai Airport. SH Electrical Works

Amount

Supply of 1 X 18W LED tube light fitting (4ft) with all accessories including LED tube lamp as per technical specification enclosed in "Annexure - I" for the proposed localizer & glidepath etc. as required.

Supplying of 36W recess mounted square type LED downlight luminaire of size 2'x2' with aluminium/alloy housing with inbuilt driver, LED lamp etc. as per technical specification enclosed in "Annexure - I" for the proposed localizer & glidepath etc. as required.

Supplying of 10W/12W surface mounted square/round LED downlight luminaire with aluminium housing with inbuilt driver, LED lamp etc. as per technical specification enclosed in "Annexure - I" for the proposed localizer & glidepath etc. as required.

SITC of 45W LED roadway luminaire with high power LED as Light source, inbuilt driver with aluminium/suitable alloy housing etc. as per technical specification enclosed in "Annexure - I" for the proposed localizer & glidepath etc. as required. The job also inculdes fabricating bracket on 40mm dia GI pipe upto a length of 2mtr including bending to the required angle with clamping arrangement by using 2nos of 35 X 6mm flat upto length of 20cm each etc. as required.

Supply of following size of ceilling fan without regulator complete with double ball bearing, motor, blades, down rod upto a maximum length of 600mm, of 15mm dia 'B' class GI pipe canopy capacitor etc. complete as required.(five star rated) Size 1200mm

Supply of following size of exhaust fan complete with all accessories such as motor, blade, louvers, capacitor etc. suitable for operation on single phase 240V, 50HZ AC Supply etc. as required. 300mm dia, 1400 RPM (heavy duty)

SITC of highwall mounted inverter type split air-conditioning units having capacity of 1.5 TR with 5 star rating suitable for operation on 230V, 50HZ, AC supply, complete with of non-ductable indoor unit with remote control and outdoor unit having copper condenser coil with aluminium fins, standard length of refrigerant piping (minimum 5 mtrs), suitable size interconnecting cabling, drain piping, first charge of refrigerant, providing raised platform/MS stand for outdoor units etc. complete as required.

Supply and fixing of wall mounting type automatic electronic voltage stabilizer having capacity of 4KVA suitable for 1.5TR Split Air conditioners & suitable for operation on an input voltage range of 180-270V, single phase, with high/low voltage cut off, ON delay etc. complete as required.

Supplying of following way, three pole and neutral, sheet steel, MCB distribution board 415volt, on surface/recess, complete with tinned copper busbar, neutral busbar, earth bus bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc as required.(But with out MCB/RCCB/Isolator). (make: approved makes) 8way, Double door, vertical type.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 way, Double door

Supply and Fixing of Surface mounted SMC Box with size (240 X 130 X 95mm) with suitable accessories including supply & fixing of 6A SP, C series MCB etc. Complete as required.

SITC of cubicle type totally enclosed free standing, dust free, anti corrosive, water & shock proof, damp & vermin proof indoor feeder pillar panel fabricated with thermoplastic polycarbonate sheet, duly powder coated including supply and fixing of following switch gears interconnection, wiring with suitable wires etc. as per the technical specification. Incoming :- 160A FP 25KA MCCB – 3 Nos Outgoing :- i) 63A FP 25KA MCCB – 2 Nos ii) 63A DP 25KA MCCB – 3Nos iii) 32A DP 25KA MCCB – 2 Nos RYB Indication Lamp – each 2Nos, Current Transformer – (100/5A, CL: 1, 5VA) – 3 Nos, Control fuse with base – 12 Nos, Current Transformer – 160/5, 5VA, CL.1 – 6 Nos Bus Coupler – 160 A FP 25KA MCCB – 1No

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5sq.mm. FR PVC insulated copper conductor single core cable etc. as required. Group C

Wiring for 3 pin 5/6 amps. Plug point with 1.5 sq.mm. PVC insulated, copper conductor cable including providing and fixing 3 pin 5/6 amps. Socket outlet on switch board (in surface/recessed steel condult wiring system) and 5/6 amps. Tumbler/piano type switch, earthing the 3rd pin, painting etc. as required.

Wiring for light/power plug with 2 x 4 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed steel conduit along with 1 No. 4 sq.mm FR PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for light/power plug with 4 x 4 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed steel conduit along with 2 No. 4 sq.mm FR PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/submain wiring along with earth wire with the following sizes FR PVC insulated copper conductor, single core cable in surface/recess steel conduit as required. a) 2x1.5sq.mm+ 1x1.5 sq.mm earth wire

Supply and fixing metal box of 150mmx75mmx60mm.deep (nominal size)on surface or in recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 3pin 5/6 amps socket outlet and 5/6 amps tumbler/piano type switch, connections, painting etc. as required (For light plugs to be used only in non residential buildings).

Supply and fixing metal box of 180mmx100mmx60mm.deep (nominal size)on surface or in recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 3pin 15/6 amps socket outlet and 15/6 amps tumbler/piano type switch, connections, painting etc. as required (For power plugs).

Supply and fixing of piano type electronic step regulator, 6 position(Hum free) on existing box including connection, complete as required.

Installation ,testing and commissioning of ceilling fan without regulator complete with double ball bearing, motor, blades, down rod, canopy capacitor etc. as required.

Installation ,testing and commissioning of exhaust fan upto 300mm sweep including making the hole on the existing wall to suit the size of the above fan, making good the damage, plastering, connections, testing, commissioning as required.

Installation, testing and commissioning of prewired LED indoor fittings of all types complete with all accessories and LED tubes etc. directly on ceilling /wall including connection with 1.5 sq.mm PVC insulated copper conductor single core cable and earthing etc. as required.

ITC of following way, three pole and neutral, sheet steel, MCB distribution board 415volt, on surface/recess, complete with tinned copper busbar, neutral busbar, earth bus bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc as required.(But with out MCB/RCCB/Isolator). 8way, Double door, vertical type.

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, RCCB, having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 Amps

Supplying and fixing 6Amps. To 32 amps.rating, 240volts,C series, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc.as required. a) Single Pole

Supplying and fixing 6Amps. To 32 amps.rating, 240volts,C series, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc.as required. b) Double Pole

Supplying and fixing Triple pole following rating, 415 volts,C series, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc.as required. 32 Amps. Rating TP, 415 volts, C series

Supplying and fixing four pole following rating, 415 volts, C series, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc.as required. 40 Amps. Rating, FP, 415 Volt, C Series

Extra for fixing the louvers/shutter complete with frame for exhaust fan of all sizes.

Supply and fixing 20Amps, 240 volts, SPN, industrial type socket outlet, with 2pole and earth metal enclosed plug top alongwith 25amps, 300mA, C-series, DP ELCB/RCCB in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required.

Supply and fixing 32Amps 415 volts, TPN, industrial type socket outlet, with 3pole and earth metal enclosed plug top alongwith 25 amps,300 mA,C-series,FP ELCB/RCCB in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket Outlet, and complete with connections, testing and commissioning etc. as required.

Supply of following 1.1KV grade aluminium conductor XLPE insulated/PVC sheathed armoured cable as per IS 7098 (part I) 1988 as required. 3.5C X 185 sq.mm

Supply of following 1.1KV grade aluminium conductor XLPE insulated/PVC sheathed armoured cable as per IS 7098 (part I) 1988 as required. 3.5C X 35 sq.mm

Supply of following 1.1KV grade aluminium conductor XLPE insulated/PVC sheathed armoured cable as per IS 7098 (part I) 1988 as required. 3C X 2.5 sq.mm

Supply of 75mm dia DWC HDPE pipe having pressure rating of 450NM with all accessories like socket / couplers, fitting & cutting, jointing etc. as per (IS14930-II) as required. (OD-75 mm & ID-63 mm nominal)

Supply of 50mm dia DWC HDPE pipe having pressure rating of 450NM with all accessories like socket / couplers, fitting & cutting, jointing etc. as per (IS14930-II) as required. (OD-50 mm & ID-38 mm nominal)

laying of 75mm dia DWC HDPE pipe direct in ground(75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. complete as required.

laying of 50 mm dia DWC HDPE pipe direct in ground(75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. complete as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size not exceeding above 95 sq.mm and up to 185 sq.mm in the existing RCC/ HUME/ METAL/GI/HDPE/DWC pipe etc. as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL/GI/ HDPE/DWC pipe etc. as required. Up to 35sq.mm

Laying and fixing of one number PVC insulated and PVC sheathed /XLPE aluminium conductor cable of 1.1 KV grade, of size not exceeding above 95 sq.mm and up to 185 sq.mm on Surface as Required.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC Sheathed/XLPE aluminium condutor cable of 1.1KV grade as required. 3.5C X 185 sq.mm

Supplying and making end termination with brass compression gland and Aluminium lugs for following size of PVC insulated and PVC Sheathed/XLPE aluminium condutor cable of 1.1KV grade as required. 3.5C X 35 sq.mm

Supplying and making end termination with brass compression gland and Aluminium lugs for following size of PVC insulated and PVC Sheathed/XLPE aluminium condutor cable of 1.1KV grade as required. 3C X 2.5 sq.mm

S/F cable route marker supplying and making cable route marker with nominal size of 10cmx10cmx5mm thick G.I plate with inscription thereon bolted/welded to 35mmx35mmx6mm angle iron, 60cm long and fixing the same in ground etc. as required.

Supply of Thermoplastic Polycarbonate enclosure consisting with Bus bar Junction Box (500A RYBN 50*10 CU Bus bar) with Key features of Dust, water proof, Anti corrosive, insulated and shock proof, internally embedded gasket made of polyurethane, for better safety the enclosure shall be fire retardant & self- extinguishing in accordance with IEC 60695 – 2-1, DIN VDE 0304 part 3, UL subject 94 for flammability V-2. It should be tested at Glow Wire test for 960deg. Cent, Protection class 2, Spring loaded lid locking device by tool operating fasteners, outdoor FRP canopy, cable strain relif clamp, floor mounting and bottom starting from 1000mm height for cable termination. Enclosure manufacturer should submit all test certificates. DB Dimension:800x1975x600

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earthelectrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc.as required.

Supply and drawing of 2CX1.5Sq.mm PVC insulated copper conductor fire alarm armoured cable in the existing surface/recessed steel conduit etc. as required.

Dismantling and re-installations of fire alarm system & data logger

Supply, Installation, testing and commissioning of three phase surge & transient protection (MOV, plug in type capable of carrying nominal discharge of 100KA, 9 block MOV), 8/20 Micro Second surge rating provides protection suitable for main distribution panels and an extended operational life etc. as per required.

MPC ELECTRICALS AND ENGINEERS

CHENNAI ENGINEERING SERVICES

SRI RAJARAJESHWARI ELECTRICALS