Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Rejected-Technical | Rejected-Technical Work completion certificate of required magnitude of EEI work not submitted |
Tender Value
₹12.8 L
EMD Value
₹25,600
Closing Date
12 Sept 2022, 10:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EE WSD APWD
EE WSD APWD Port Blair
Providing and laying of U.G. Cables along with Feeder boxes in the big ground in front of the HLGs Residence at Raj Niwas
2022_APWD_7166_1
123/NIT/WSD/2022-23
Open Tender
Electrical Works
Works
60 days
Port Blair
Please refer Tender documents.
5 documents required · 5 mandatory
₹0
₹25,600
17 Sept 2022
31 Aug 2022
12 Sept 2022
31 Aug 2022
12 Sept 2022
1 Sept 2022
31 Aug 2022 - 12 Sept 2022
Amount
Supplying of following size XLPE insulated armoured aluminium conductor UG cable of 1.1 KV grade conforming to IS 7098. Make : Havells/Polycab or its equivalent.
3.5 core X 70 sq.mm
3.5 core X 185 sq.mm
Laying of one number XLPE insulated armoured power cable of 1.1 KV grade of following size in the existing DWC HDPE/GI Pipe as required.
Above 35 sq.mm and upto 95 sq.mm
Above 95 sq.mm and upto 185 sq.mm
Laying of one number XLPE insulated armoured power cable of 1.1 KV grade of following size on surface as required.
Above 35 sq.mm and upto 95 sq.mm
Above 95 sq.mm and upto 185 sq.mm
Laying of one number XLPE insulated armoured power cable of 1.1 KV grade of following size direct in ground (50 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. complete as required.
Upto 185 sq.mm
Supplying and laying of following size of DWC HDPE pipe, ISI marked along with all accessories like socket,tee, bend, couplers etc. conforming to IS 16205 (Part 24), 2018 (old IS 14930, Part 2,2001) completes with fitting and cutting, jointing etc. direct in ground (50 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. complete as required.
77 mm dia (OD-77 mm & ID-63 mm nominal)
110 mm dia (OD-110 mm & ID-95 mm nominal)
Supplying and laying of following size of DWC HDPE pipe, ISI marked along with all accessories like socket,tee, bend, couplers etc. conforming to IS 16205 (Part 24), 2018 (old IS 14930, Part 2,2001) completes with fitting and cutting, jointing etc. on surface/wall including clamping etc as required.
77 mm dia (OD-77 mm & ID-63 mm nominal)
Supplying and laying of following size of DWC HDPE pipe, ISI marked along with all accessories like socket,tee, bend, couplers etc. conforming to IS 16205 (Part 24), 2018 (old IS 14930, Part 2,2001) completes with fitting and cutting, jointing etc. in the cable trench/cable duct as required.
110 mm dia (OD-110 mm & ID-95 mm nominal)
Supplying and making end termination with aluminium lugs for following size of XLPE insulated armoured power cable of 1.1 KV grade
3.5 Core X 70 sq.mm
3.5 Core X 185 sq.mm
Fabrication, Erection, Testing & Commissioning of Outdoor type, floor mounted, Feeder box 200 amps, 415 volts, 50 Hz, 3 phase non-extendable type, double side door opening with locking arrangement and having canopy on top. The Feeder box shall be made up of 1.6 mm thick Colled Rolled Sheet Steel of size 1.4 m X 1.5 m X 0.40 m (minimum) mounted on MS frame made out of 35 x 35 x 5 mm (minimum) MS angle and MS flat of size 30 X 5 mm (minimum) suitable for mounting including its supply as follows: a) 3 nos of 200 Amps Porcelain cutout with Neutral link - 2 sets b) 200 Amp, FP, Changeover switch.Make : Indoasian or its equivalent - 1 No c) Copper Busbar of size 50 x 5 mm (minimum) - 1 set d) 4 pole, 100 Amps, 25 kA breaking capacity MCCB. Make : Indoasian or its equivalent - 4 Nos. e) 4 pole, 63 Amps, 25 kA breaking capacity MCCB. Make : Indoasian or its equivalent - 2 Nos. The above mentioned switchgears shall be mounted in the feeder box including its connections.Panel should have provision for cable entry from bottom and shall be provided with additional base frame of 350 mm (minimum) at bottom. The panel should have provision for earthing connection, painted with 1 coat of primer and 2 coats of finishing water proof paint of approved colour and it also includes excavation, foundation of panel etc as directed by Engineer in Charge.
Fabrication, Erection, Testing & Commissioning of Outdoor type, floor mounted, Feeder box 100 amps, 415 volts, 50 Hz, 3 phase non-extendable type, double side door opening with locking arrangement and having canopy on top. The Feeder box shall be made up of 1.6 mm thick Colled Rolled Sheet Steel of size 1.5 m X 1.0 m X 0.40 m (minimum) mounted on MS frame made out of 35 x 35 x 5 mm (minimum) MS angle and MS flat of size 30 X 5 mm (minimum) suitable for mounting including its supply as follows: a) 3 nos of 100 Amps Porcelain cutout with Neutral link - 1 set b) 100 Amp, FP, Changeover switch.Make : Indoasian or its equivalent - 1 No c) Copper Busbar of size 25 x 5 mm (minimum) - 1 set d) 8 way TPN MCB Distribution Board. Make Indoasian or its equivalent - 1 No. e) 4 pole, 100 Amps Isolator. Make : Indoasian or its equivalent - 1 No. f) 6 A to 32 A rating, SP, MCB.Make : Indoasian or its equivalent - 15 Nos. The feeder box shall also have provision to accomodate following switchgears (excluding supply) as follows: a) 6 way SPN MCB Distribution Board - 1 No. b) DOL starter suitable for 2 HP Motor - 2 Nos. c) DOL starter suitable for 1 HP Motor - 1 Nos. The above mentioned switchgears shall be mounted in the feeder box including its connections.Panel should have provision for cable entry from bottom and shall be provided with additional base frame of 350 mm (minimum) at bottom. The panel should have provision for earthing connection, painted with 1 coat of primer and 2 coats of finishing water proof paint of approved colour and it also includes excavation, foundation of panel etc as directed by Engineer in Charge.
Fabrication, Erection, Testing & Commissioning of Outdoor type, floor mounted, Feeder box 100 amps, 415 volts, 50 Hz, 3 phase non-extendable type, double side door opening with locking arrangement and having canopy on top. The Feeder box shall be made up of 1.6 mm thick Colled Rolled Sheet Steel of size 1.2 m X 1.0 m X 0.40 m (minimum) mounted on MS frame made out of 35 x 35 x 5 mm (minimum) MS angle and MS flat of size 30 X 5 mm (minimum) suitable for mounting including its supply as follows: a) 3 nos of 100 Amps Porcelain cutout with Neutral link - 1 set b) 100 Amp, FP, Changeover switch.Make : Indoasian or its equivalent - 1 No c) Copper Busbar of size 25 x 5 mm (minimum) - 1 set d) 8 way TPN MCB Distribution Board. Make Indoasian or its equivalent - 1 No. e) 4 pole, 100 Amps Isolator. Make : Indoasian or its equivalent - 1 No. f) 6 A to 32 A rating, SP, MCB.Make : Indoasian or its equivalent - 15 Nos. The above mentioned switchgears shall be mounted in the feeder box including its connections. The panel should have provision for earthing connection, painted with 1 coat of primer and 2 coats of finishing water proof paint of approved colour and it also includes excavation, foundation of panel etc as directed by Engineer in Charge.
Providing and fixing MCCB 200 Amp, 35 kA (minimum) breaking capacity 4 pole, 415 volts, 50 Hz in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. Make:- Indoasian /L&T/C&S/Legrand or its equivalent.
M/s G K Construction
M/s Sai Electrical Works
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .