ESTIMATE OF R and M SIDE PROTECTION OF VR BRIDGE AT RD 17340 26650 33130 48800 60925 64300 69500 and OF TAROBARI DRAIN

Structural Steel work in compound built up girders or stanchions built up from two or more R.S joists or channel section or plates and angles etc. riveted or welded, including cutting and fixing all lattices bars, stiffeners, gusset, plates, bolts nuts, rivets, welding rods etc. complete with flange plates, heads sole plates, angle connections, etc. with hoisting and erecting in position as per CSR Item No. 18.7

Fillet welding with high strength steel rods complete in all respect and to entire satisfaction of the engineer incharge (8 mm) As per sanctioned committee rates at Sr no 17(ii)

Scrapping, Brushing to remove paint to base metal surface(CSR item no 16.36)

Painting two or more coats excluding priming coat with synthetic enamel paint in all shadeson wood work,metalli corplastered,concretesurface to give an even shade.

Cautionary sign board 900x900x900mm triangular as per IRC 67- 2012 with high intensity Microprismatic graderetro reflective Sheeting as per ASTMD4956 09 and as per IRC672012 fixed over 4mm thick aluminum Composite material (ACM) sheeting having aluminum skin thickness of 0.4 to0.5mmon both sided and fixingthesamewithsuitablesizealuminumalloy rivets@200mmc/c toback support frameof 25x25x3mmangle ironsupported on a square hollow steel section post 60x60x3.2mm conforming to IS4923without cost of definition platefirmlyfixedtogroundinfoundationconcrete M-25 of size 0.45x0.45x0.75m for vertical post complete as per clause 801 of MORT&H specifications. Supplier shall providea warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting & a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67-2012

Moulded Shank Road Stud Supplying and fixing of single mould twin shank reflective road studs made out of poly carbonate/ABS moulded body and reflective panel swith microprismatic lensor Glass Beeds capable of providing total internal reflectionof the light entering the lens face with retro reflectance and chromaticity values shall be as given in the detailed specifications and the product shall conform to ASTMD4280. The raised pavement marker shall also meet all the testing conditions of ASTMD4280 and fixed tot he road surface using the adhesive. Two cylindrical Polymer Shanks of not less than 20 mm d iameter and not less tha 30 mm length shall be molded inthe RP M body.The marker shall support a load of 13635 Kg ested in accordance with ASTMD4280. The marker shall with stand flexural strength of 909kgf force in accordance with ASTMD4280. Marker lenses shall be moulded of Polycarbonate or methyl methe crylate conforming to ASTMD788.The supplier shall providea 2years warranty for satisfactory field performance as per clause 804.7.3 of MORT&H 5th revision specifications.

Road Delineator/Vertical Guide Post Delineator Providing and fixing of Standard Metal Delineator as per IRC79:2019 consisting of retro reflective area in whit e color using full cubecornermicroprismaticnon-metallic retro reflective sheeting on each side conforming with IRC 67 2012 and meeting the coefficient of retroreflection values as perASTMD4956TypeXI tablespecification.The delineator shall bepaintedwithonlyblack color powdercoatofminimum40micronsthickness,on topofwhichretroreflectivesheetingonly inwhite colour shall be pasted on both sides. The structureshall haveheightnot less than800mm above theground, widthnot less than100mm andshallextendnotmorethan300mmbelowthe groundwhilebeinginstalled. Thedelineatorshall have grooves across the length to make the reflective sheets vandal-proof. Thedelineator is meant for application ongaps inmedian, traffic islands, dangerous bends, roundabouts, narrow bridges etc. or as desired by site engineer.

Rumble Strips with thermoplastic road marking Providingandmakingrumblestrips15-20mm high at centre, 250mmwideplaced at 1mcentre to centreover freshly laidbituminous layer by using close grade dpremix surfac ingmaterial type Bat approved locations to control speed and marke dwith 100mm wide white strips of thermoplastic road marking paint. The close graded premixsurfacing material type B shall conform totechnical clause 512 and thermoplastic roadmarking paint shall conform to technical clause803 of MORT&H specifications

Any Other item