CONSTRUCTION OF JUDICIAL BLOCK AND RESIDENCE IN SECTOR - 1 AT PATAUDI IN DISTRICT GURUGRAM (BOQ FOR PDG. 500 KVA COMPACT SUB STATION, 250 KVA D.G. SET AND STREET and SECURITY LIGHT).

Amount

Earth work in excavation in fundations, trenches, etc in all kinds of soils, not exceeding 2 Meter depth including dressing of bottom and sides of trenches, stacking the excavated soil, clear from the edge of excavation and subsquent filling around masonry in 15 cm layers with compaction, including disposal of all surplus soil as directed with a lead of 30 metes.

Cement lime concrete 1:8:16 with brick blast 40mm nominal size in foundation and plinth.

Cement concrete 1:2:4 with slone aggregate 20mm nominal size in foundation and plinth.

First Class bricks work laid in cement sand mortar 1:6 in foundation and plinth

11:43 cm thick bricks wall laid in cement sand mortar 1:4 without rainforecement, in foundation and plinth.

Conglomerte floor 50 mm thick CC topping 1:2:4

12 mm thick cement plaster 1:6

Mild steel reinforcement for RCC works where not included in the complete rate of RCC, including bending, binding and placing in position complete

Suply and erection of PVC copper insulated and sheathed 2-core circular flexible wire.Size 1.50 sqmm ( 48 / 0.20mm).

Suply and erection of moulded case circuit breakers on wall or on existing pedestal including bonding to earth and necessary connections. Make L&T, ABB, Havell’s, Standard, C&S15 amp.to 60 amp. 415 V ,10 KA 3-phase.

250 amp. 415 V , 35 KA 3-phase.

300 amp. to 400 amp. 415 V , 35 KA 3-phase.

Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. Make Jindal, Prakash, Ravindra, Tata Galvanised iron pipe 65 mm dia on surface.

Galvanised iron pipe 50 mm dia on flushed.

Heavy gauge welded conduit pipe 25 mm dia 1.60 mm thickness flushed.

Supply and erection of PVC pipe of 6 kg. pressure laid 1 metre below ground level complete including digging refilling of the trench with jointing etc. Make AKG, Diplast, Polypack PVC pipe 65 mm dia.

Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required .

Extra for using salt and charcoal / coke for pipe earth electrode as required.

Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

Earthing with tinned copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc.(but without charcoal or coke and salt) complete as equired.

Extra for charcoal or coke and salt for G.I. Plate or copper plate earth electrode.

Pdg. and fixing 25 mm x 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode as equired .

Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required .

Pdg. and fixing 25 mm x 5 mm G.I. Strip on surface or in recess for connections etc. as equired with all labour and material.

Supply and erection of copper tape 32 mm x 6 mm thick from earth electrode directly in ground and surface , fixed with suitable copper stapples of same size.

(b) Lightning conductor Galvanised iron. Supply and erection of G.I. tape 32 mm x 6 mm thick from earth electrode directly in ground and surface , fixed with G.I. stapples of same size.

Suply and erection of under ground cable 1 metre below ground level covered with sand and bricks including necessary connections,digging and refiling of trenches. Make : Grandlay,Havells, Polycab,R.R. Kabel 25 Sq. mm 3.5 Core Ard. Cable .

70 Sq. mm 3.5 Core Ard. Cable .

95 Sq. mm 3.5 Core Ard. Cable .

300 Sq. mm 3.5 Core Ard. Cable .

16 Sq. mm 4 Core Ard. Cable .

Suply and erection of under ground cable, loose in existing pipe or trenches complete with necessary connections. Make : Grandlay,Havells, Polycab,R.R. Kabel 25 Sq. mm 3.5 Core Ard. Cable .

70 Sq. mm 3.5 Core Ard. Cable .

95 Sq. mm 3.5 Core Ard. Cable .

300 Sq. mm 3.5 Core Ard. Cable .

16 Sq. mm 4 Core Ard. Cable .

Suply and erection of suitable compression type brass cable glands for underground Cable. 10 Sqmm to 16 Sqmm Cable 2 to 4 Core .

25 Sqmm to 50 Sqmm Cable 2 to 4 Core.

70 Sqmm to 95 Sqmm Cable 3 to 3.5 Core .

300 Sq mm to 400 Sqmm Cable 3 to 3.5 Core .

Supply and erection of weather proof M.S.Box of size 20 cm x 15 cm x 10 cm. covered with 3.00 mm thick M.S.sheet hinged cover, locking arrangemrnt , housed in wall , including the cost of 1 no. 16 amp. 415 volts kit-kat and 2 nos. 63 amp. 415 volts neutral links fixed on hard wood board in the M.S.Box including painting and necessary connections .

Supply and erection of prestressed cement concrete pole as per IS : 1678-1960. 9 metres long 105 mm x 115 mm at top and 105 mm x 315 mm at bottom with working load of 200 Kg. burried 1.80 m in ground.

Supply and erection of M.S Saddles and clamps on wall/RCC parapit for fixing the under ground cable at a distance of .60 metre centre to centre fixed by means of rawl plug including the cost of all labour and material required to complete the job in all respect.

Suply , erection, testing and commissioning of wall / free standing floor mounting dust and vermin proof compartmentalized cubical Panel made out of 2.0 mm thick CRCA sheet, equired hardware, 3mm thick bakelite sheet provided all along the bus bar and cable alley separating switches compartment and supporting suitable channel, dully painted by 2 coat of zinc / Red oxide primer followed by 2 coats of powder coating in grey or equired shade after rinsing. The panel having PU/ Neoprene ruBus Barer gasket of not less than 3 mm thickness, separate detachable gland plate MS base channel, hinged door with inter locking arrangemrnt for equipment / switch gear, Transparent acrylic sheet shall be provided in front of bus bar compartment to prevent direct access to bus bars. Extended solid copper bars up to cable alleys shall be provided for outgoing connection which shall be paid as extra items. Side walls and cable alley compartments shall be having bolted type doors with detachable extension type structure. The panel will be complete with control wiring ( copper) and fuse protection. ( only outer area on all sides shall be measured).

Suply and erection of copper bus bar duly tinned by means of SMC/DMC type insulator high tensile nuts and bolts spring washers fixing to same in existing panel including bending, cutting in equired size and shape and insulation with colour coading heat shrinkable PVC sleeves complete in all respect upto entire satisfaction of Engineer-in-charge of work.

Suply & fixing of rotary handle for on / off operation of existing MCCB in the LT panel including fixing the same in position with all labour and material equired to complete the job in all respect Make L&T, ABB, Havell’s, Standard, C&SRotary handle up to 125 A, MCCB

Rotary handle above 125 A, MCCB

S/E of mark double walled corrugated (DWC) HDPE pipe laid 1 mtr. Below ground level including diging and refilling of earth including cost of suitable size socket/cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-In- Charge of the work. HDPE pipe 63/50 mm outer dia/ inner dia.

HDPE pipe 145/123 mm outer dia/ inner dia.

Supply and errection of Hot Dip Galvanized octagonal pole 3 mm thickness, with base plate including of nut and bolts and all accessories as supplied by the manufacture including cost of foundation accessories etc. The foundation bolts as per manufacturer design should be hot dipped galvanized pole complete of 2 nos. 100 A, 4 pole nature links including connection etc with suitable connection arrangements for 2 no. MCB/ kit kat including cost of RCC 1:1:5:3 for foundation of size 0.7 m x 0.7m x 1.8 m with minimum 8 Nos. 12 mm dia longitudinal MS reinforcement rods with rings of 8 mm dia not more than 200 mm CC for fixing the pole with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work. Make Philips, Bajaj, GE India, Surya Roshni, VIPIN8 Mtr. Long pole with top dia 70 mm and bottom dia 135 mm with base plate of size 225 x 225 x 16 mm

Suply and erection of moulded case circuit breaker single pole/ 4 pole on wall/ on existing pedestal including bounding to earth and making necessary connection equired to complete the job the job in all respect up to the entire satisfaction of the Engineer -in - Charge of the work. Make L&T, ABB, Havell’s, Standard, C&S4 pole MCCB 200 amp.

Supply and erection of XLPE (E) 11 KV HT aluminum conductors armoured cable ISI mark laid in 1 meter below grund level with sand and bricks with all labour and material including digging and refilling of trench required to complete the job in all respect upto the entire satisfaction of the Engineer - In - Chage of the work. Make Havell’s DIatron, KEI 50 sqmm 3 core XLPE cble

Supply and erection of XLPE (E) 11 KV HT aluminum conductors armoured cable ISI mark laid in existing pipe/ trenches/ surface with all labour and material including digging and refilling of trench required to complete the job in all respect upto the entire satisfaction of the Engineer - In - Chage of the work. Make Havell’s DIatron, KEI50 sqmm 3 core XLPE cble

Supply and erection of heat shrinkage type end termination jointing kit indoor type of suitable to accommodate 3 core 11 KV XLPE aluminum cble/ ABC cable complete with all the kit contents including earth continuing connection along with 3 nos. crimpling type aluminum lugs of suitable capacity including makiing joining etc. complee in all respectSuitable for 16 to 50 sqmm 3 core XLPE cable

Supply and erection of heat shrinkage type end termination jointing kit outdoor type of suitable to accommodate 3 core 11 KV XLPE aluminum cble/ ABC cable complete with all the kit contents including earth continuing connection along with 3 nos. crimpling type aluminum lugs of suitable capacity including makiing joining etc. complee in all respectSuitable for 16 to 50 sqmm 3 core XLPE cable

S/I/T/C of 11kV Package 500 KVA Sub-Station consisting of following, Make : Schneider Electric, ABB, Siemens HT SWITCHGEAR 11kV 630Amps 21KA/3 sec. Non-Extensible Ring Main Unit Compact switchgear consisting of Two Number Fixed manual Load break Switches and One number Fixed Manual Vacuum Circuit Breaker in SF6 insulated stainless steel enclosure with series trip, self powered microprocessor based numerical over current and earth fault relay protection. Interconnection between HT Switchgear and primary of transformer shall be done through 1C x 3R x 95 sq.mm Aluminium Unarmoured XLPE cable (Make: ABB /Siemens/ Schneider) = 1 no. Interconnection between HT switchgear & Transformer using 1Cx3Rx 95Sq.mm XLPE Single core cable & Interconnection between Transformer & LT switchgear using Copper Busbars. Internal earthing connections including transformer neutral by using 50x6 mm GI Strips. = 1 set All specification as per DNIT

Supply & erection of lightning arestor of W.S./ G.E. make SDU suitable for 11KV 3 Phase 50cycle grounded neutral system comprising of spark gap type quench gap types in series with non lineer register element housed in horizental seals porcelin bushing with line ground terminal alongwith mounting clamp conforming to ISS-3070 part-II of 1985 with latest ammendments with all labour and meterial required up to the entire satisfaction of Engineer -in-charge of work

Supply & erection of fire existinguishers ISI mark( CO2 type 4.5 kg. Capacity as per IS:7285 duly erected/ hang on wall with hooks with all labour and material required to complete the job in all respect to the entire satisfaction of Engineer-in-charge of work. Make Safex, Minimax/cease fire

Supply and erection of 11 K.V gang operated switch Jayshree make conforming ot IS and latest ammendment including suitable size of copper blade erection of same on existing H-pole with the help of 3 Nos. Channels of size 75x 40 x 6 mm thick 1.8 M long fixed with suitable size of M.S. Clamp, nuts and bolts including cost of 6 Nos 11K.V. Pin insulator with G.I. Pin, RD Fuses and painting with 2 coat of approved paint and one coat of red oxide including all labour and material required to complete the job in all respect to the entire satisfaction of Engineer-in-charge of work.

Supply and erection of stay wire suitable for 9M long PCC pole made out of 7/3 SWG GI wire with U type M.S. Rod 5/8" dia duly threaded by means of angle iron of size 50 x 50 x 6 mm x 30 cm 6 feet long M.S. Rod burried in ground after fixing with cross channel size 75 x 40 x 6 mm x 60 cm long the stay wire will be binded on the top of the pole with help of suitable size of double U type M.S. Clamps and stay fixed with nuts and bolts the stay wire shall be insulated in the middle piont with the help of egg insulator including all labour and material required to complete the job in all respect to the entire satisfaction of Engineer-in-charge of work.

S/E of MS bucket stand suitable for six Nos. fire buckets (but without buckets) including the cost of welding & painting with all cost of red oxide adn two coat of enamelled paint of red colour completion all respect.

Supply and erection of fire bucket of G.I. sheet of 24 gauge write with " FIRE" as per fire specification.

Supply and erection of Rubber Mat 1mx2mmx 3mm thick suitable for 11/33 KVA as per IS No. 15652C/M/L 3017739 as per approved by Chief Electrical inspector, Govt. of Haryana.

S/E of 11KV disc insulator (jayshree make) with pin with labour and material required to complete the job including fixing the same on existing chanel complete in all repspect

S/E of M.S. chanel, MS angle, MS flat & nuts & bolts of required size including painting and cutting etc. with labour and material required to complete the job including fixing the same on existing pole complete in all repspect

Supply & erection, Commissioning and testing of 11 KV indoor HT metering panel complete with Ct's PT's cubical & electronics meter with accuracy class 0.5. as par requirement / approved by DHBVN consisting of the followings :Cubical panel box standing floor mounting type made out of sheet steel 14 SWG CRCA sheet with channel iron base frame, spray painted with strong synthetic light grey enemal paint as per size and design aproved by DHBVN. 3 Nos. 11KV CT's of suitable rating for indoor installation (As per - approved make of DHBVN).1 No. 11 KV PT 11000/110 V 10VA burden 0.5 accuracy oil filled suitable for indoor installation of approved make of DHBVN. Electronic meter 3 phase 4 wires, 0.5 accuracy for recording reading in KWH of rating and make approved by DHBVN with push button display operating system for different kind of readings. The cubical panel will be complete in all respect including inter connection internal wiring with PVC copper cable its tasting and approval of all item from DHBVN with a guarantee of one year from the date of comissioning including cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer in Charge of the work.

Supply installation testing and commissioning of 800 Amp. 4 pole 50KA microprocesser based manual drawout type ACB including cost of under voltage release, rotary handle, shunt trip and closing coil including making necessary connection with all labour and material required to complete the job in all respect upto entire satisfaction of Engineer -in- charge of the work. Make L&T, ABB, Havells & Standard

Supply, installation, testing and commissioning of 250 KVA, D.G. set comprising of : "Greaves" Enginer model no. D3V6TAG21, Radiator cooled, developing 309.0 BHP at 1500 RPM, complete with Electronic Governor, standard accessories coupled to "Crompton/ MECC ALTE" alternator rated at 200 KW/ 250 KVA at 415 Volts, mounted on channel iron base framed complete with fuel tank & batteries and standard accessories alongwith AMF panel in liu of STD panel with all labour & material to complete the job in all respect upto the Entire satisfaction of Engineer - in - Charge of the work.

Supply and erection of 90 watts LED street light fittng with lense IP 65/66, HP dia cast aluminium hoising body including erection of same on 9 mtr. Pole with all labour and material required to complete the job in all respect upto entire satisfaction of Engineer - In- Charge. Make & model Philips BRP410 LED 091 CW HE MR PC S2 PSU GR/ Bajaj BRTFG90WLEDWW/ Crompton LSTP90CDL/ Wipro LR02-102-XXX-57-XX or equivelent model of Surya / C&S Electric

Supply and erection of 120 watt. flood light IR66 fitting with all accessories as supplied with the fitting by manufacturer including erection of same with anecessary nuts & bolts and making necessary connection complete in all respect upto entire satisfaction of Engineer - In- Charge. Make Philips BVP122 LED128 CW FLNB FG XTFC/ Crompton LFLN-120-CDL/60 /Wipro LF20-132-060-57-XX / Equivalent model of Bajaj /Surya / C&S Electric

Supply and erection of single arm bracket made of 50 mm dia G.I pipe B class ISI 1.5 mtr. long with 25 mm dia G.I. bottom pipe with 75 mm dia 60 cm. long G.I. collar pipe, top covered with ornamental cap duly welded, painted 2 coats of aluminium paint on bracket and golden paint on ornamental cap including erection of same with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-In - charge of work.Single side G.I street light bracket(as per standard specifications of manufacturer of GI octagonal pole).

Supply and erection of 40/45 watt LED post top lentern including erection of same on gate pillers with anecessary nuts & bolts and making necessary connection complete in all respect upto entire satisfaction of Engineer - In- Charge. Make Crompton LPTO-40-CDL or equivalent model of Philips, Wipro & Bajaj /Surya / C&S Electric

Supply and erection of IP 65 rated inverted pyramid tripod type LED bollard with soft 360 deg light distribution including erection of same on plinth with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-In - charge of work. Make: Crompton LBLSN-10-CDL or equivalent model of Bajaj / Philips / Surya / C&S Electric

Janta Electric Store

Highlight Associates and Contractors