SPL REPAIR/ REPLACEMENT OF OH LINE TO UG LINE IN CERTAIN AREAS AND OTHER SANCTIONED WORKS UNDER GE (EAST) JRC

Amount

Excavation in trenches in soft/loose soil not exceeding 1.50 mtr wide and not exceeding 1.50 mtr in depth for laying of cables and getting out complete all as specified and directed by Engineer-in-Charge.

Returing, filling in, including spreading, leveling watering and well ramming inlayers not exceeding 25 cms thick each layer compete all as specified and directed by Engineer-in-Charge.

Removal of surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed by Engr-in-charge.

Material and labour for sand cushioning with a layer of sand 8cm thick before laying of cable and 15 cm thick after laying of cable in trenches complete all as specified and as directed.

Supply & laying old size sub class 'B' bricks, laid flat in trenches over the cable with the length of brick perpendicular to the direction of cable length, adjacent/abutting each other complete all as specified and directed by Engineer-in-charge.

M & L for boring hole under the road / pavement / hard standing with the help of trenchless technology using ultra sound technique and necessary machine including DWC (Double Wall Corrugated) pipe of 100mm dia suitable for 0.4 mpa working pressure not less than one metre below ground level complete all as specified & directed by Engineer-in-charge.

Supply and laying cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armoured electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 400 Sq mm 3.5 core complete all as specified and as directed.

Ditto as per item no. 7 above, but of size 300 Sq mm 3.5 core

Ditto as per item no. 7 above, but of size 240 Sq mm 3.5 core

Ditto as per item no. 7 above, but of size 185 Sq mm 3.5 core

Ditto all as per item no. 7 above, but of size 150 Sq mm 3.5 core

Ditto all as per item no. 7 above, but of size 95 Sq mm 3.5 core

Ditto all as per item no. 7 above, but of size 70 Sq mm 3.5 core

Ditto all as per item no. 7 above, but of size 50 Sq mm 3.5 core

Ditto all as per item no. 7 above, but of size 35 Sq mm 3.5 core

Ditto all as per item no. 7 above, but of size 25 Sq mm 3.5 core

Ditto all as per item no. 7 above, but of size10Sq mm 4 core

Ditto all as per item no. 7 above, but of size 16 Sq mm 4 core

M&L rigid PVC conduit pipe 20 mm dia exclusive of boxes(junction/terminal) but exclusive of all tees ,bends , elbows, reducers ,bell mouth tubs, ends and fixing , all accessories such as couplers, lock nuts, saddles, pipe hooks etc, all as specified and directed by Engr-in-Charge.

Supply & Fixing of PVC insulated three core wire copper conductor 1100 Volt grade of size 1.0 Sqmm drawing through stove enamelled steel conduit for connection purpose complete all as specified and directed by the Engr-in-Charge.

Material and labour for earthing complete for LT Poles with galvanised steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground vertically at a depth not less than 2.25 metres below normal ground level with top edge of the plate at a depth not less than 1.5 metres below normal ground level, connected with and including GI strip 25x4 mm in and including GI pipe 20mm bore light grade as protection pipe (from top of earth plate up to the test point) by means of GI bolts, nuts, check nuts and washers of GI and thimbles, earth plate surrounded by packed layers of charcoal dust and common salt 15cm thick, all around including top and bottom and watering pipe 20mm bore of GI pipe light grade with funnel and wire mesh, PCC chamber of size 300x300x300mm(top of chamber minimum 15 cm above the normal ground level (1:3:6) using 20mm graded stone aggregate and RCC cover (1:2:4) type B-I using 20mm graded crushed stone aggregate of 25mm thick with 2 nos MS handles of 12mm dia including necessary excavation/ earth work in any type of soil/rock and as shown in Electrical plate No. 3 of SSR Part-I (2020) testing on completion complete all as specified.( For 09 Nos panel=18Nos),( For 3 Nos Busbar=06 Nos) .If result is not found below 3 ohm, then contractor will do 2nd earthing on his own cost.

Material and labour for earthing complete for LT Poles with galvanised steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground vertically at a depth not less than 2.25 metres below normal ground level, from top of earth plate up to the test point with top edge of the plate at a depth not less than 1.5 metres below normal ground level, connected with and including GI wire 4mm in and including GI pipe 15 mm bore medium grade as protection pipe by means of GI bolts, nuts, check nuts and washers of GI and thimbles, earth plate surrounded by packed layers of 15 cms thick charcoal dust and common salt 15cm thick, all around including top and bottom and watering pipe 20mm dia bore of GI pipe light grade with funnel and wire mesh, PCC (1:3:6) chamber of size 300x300x300mm (top of chamber minimum 15 cm above the normal ground level using 20mm graded stone aggregate and RCC cover (1:2:4) type B-I using 20mm graded crushed stone aggregate of 40 mm thick with 2 nos MS handles of 12mm dia of size 300mm x 300 mm in angle iron frame of size 40mm x 40mm x 6mm thick including necessary excavation/ earth work in any type of soil all as shown in Electrical plate No. 3 of SSR Part-I (2020) testing on completion complete all as specified.(For street lights poles).If result is not found below 3 ohm, then contractor will do 2nd earthing on his own cost.

Supply and fix GI pipe 50 mm bore light grade for protection of cable including provn of PVC heavy duty bends complete for fixing along GI pipe along wall/ pole/laid under the road/ floor complete all as specified and directred by Engr-in-Charge.

Supply and fix GI pipe 40 mm bore light grade for protection of cable including provn of MS flat bends/clamps complete for fixing along GI pipe along wall/ pole/laid under the road/ floor complete all as specified and directred by Engr-in-Charge.

Supply & Fix single piece moulded SMC junction box of size 230 x 170 x 105 mm outer & 200 x 140 x 95 mm inner dimension consisting of one SP MCB 6 Amps & one 4 way connector, including all necessary fixing arrangemets for fixing to LT Pole ie necessary Clamps, nut, bolts & Washers of suitable size including dismantling old unserviceable complete all as specified and as directed. Make : Sintex / National or its Equivalent

Taking down cross arms, channels, angle iron, clamps, nut, bolts, stay wire, stay assembly, GI wire, anti climbing devices, danger notice boards etc complete all as speicified and directed by Engineer-in-Charge.

Dismantling insulators any type, any size from existing LT poles street light feeders

Dismantling of old ACSR or AAC conductors from existing street light feeders or LT feeder supply complete all as specified.

Taking out old LT cable off any sizes

Supply, installation, commissioning and testing of factory made (CPRI approved) LT panel Board of Suitable size out door type (double door) 415 Volts, dust proof,vermin proof made out of CRCA sheet 3.15 mm thick duly compartmentalized inside panel with 2 mm thick CRCA sheet , to accommodate the incoming and outgoing each switch gear shall have be independent opening, and having provision for front and rear side opening with rubber beading and brass cable glands for each cable to make it weather and vermin proof. double door hinged type, both side openable, air fins for ventilation, panel shall be mounted on angle of size (50 x 50 x 6 mm) & duly spray painted with seven tank process internally and externally with two coats of synthetic enamel paint over a coat of red oxide primer supported on 04 legs of 750mm long, 300mm grouted in plain cement concrete blocks in 1:2:4 type B1 (using 20 mm graded stone aggregate) and 450 mm ground clearance or as per manufacturer instruction and including notice board & Danger plate complete with all connections incoming / out going complete all as directed by Engineer-in-charge. comprising of following accessories :- (Main Panel ) :-(P-1 PANEL) (i) Bus bar strip,four pole and capacity 500 Amps Al bus bar of suitable size based on 1.0 Amps per sqmm, coloured with plastic coated insulated and sleaves in four colours (Red,Yellow , blue and black ) fixed on porcelain insulators with necessary nuts and bolts and washers etc

(ii) INCOMING : - (a)S & F for in replacement MCCB 350A, 4 pole, 35 kA with Adjustable thermal magnetic release, Ics = 100% Icu, 415 volts, 50 Hz with with phase barrier/phase seperator/spacer with copper spreader links complete. -01 No. (b) Multifunction meter with LCD display, accuracy class 1.0, having parameters KW, KVA, KVAh & PF duly prewired with suitable size of copper insulated FRLS wire with universal code including suitable CTs complete - 01 No. (c) Indicator with neon lamps for RYB , 3 Phase with MCBs set of three -01 set (iii) OUTGOING:- (a) MCCB 125 Amps, 4 pole, 25 kA with Adjustable thermal magnetic release, Ics = 75% Icu , 415 volts, 50 Hz with phase barrier/phase seperator/spacer with copper spreader links fixing accessories complete. -01 Nos. (b) MCCB 100 Amps, 4 pole, 25 kA with Adjustable thermal magnetic release, Ics = 75% Icu , 415 volts, 50 Hz with phase barrier/phase seperator/spacer with copper spreader links other fixing accessories complete. -01 Nos. (c) MCCB 40 Amps, 4 pole, 25 kA with Adjustable thermal magnetic release, Ics = 75% Icu , 415 volts, 50 Hz with phase barrier/phase seperator/spacer with copper spreader links and required nut, bolts or other fixing accessories complete. -01 Nos. (d) MCB TPN 40Amp, 415 V, 10 KA- 05 Nos (e) 3 phase astronomical timer- 01 Nos (f) Indicator with neon lamps for RYB , 3 Phase

Supply, installation, commissioning and testing of factory made (CPRI approved) LT panel Board of Suitable size out door type (double door) 415 Volts, dust proof,vermin proof made out of CRCA sheet 3.15 mm thick duly compartmentalized inside panel with 2 mm thick CRCA sheet , to accommodate the incoming and outgoing each switch gear shall have be independent opening, and having provision for front and rear side opening with rubber beading and brass cable glands for each cable to make it weather and vermin proof. double door hinged type, both side openable, air fins for ventilation, panel shall be mounted on angle of size (50 x 50 x 6 mm) & duly spray painted with seven tank process internally and externally with two coats of synthetic enamel paint over a coat of red oxide primer supported on 04 legs of 750mm long, 300mm grouted in plain cement concrete blocks in 1:2:4 type B1 (using 20 mm graded stone aggregate) and 450 mm ground clearance or as per manufacturer instruction and including notice board & Danger plate complete with all connections incoming / out going complete all as directed by Engineer-in-charge. comprising of following accessories:-(PANEL P-2) (i) Bus bar strip,four pole and capacity 250 Amps Al strip of suitable size based on 1.0 Amps per sqmm, coloured with plastic coated insulated and sleaves in four colours (Red,Yellow , blue and black ) fixed on porcelain insulators with necessary nuts and bolts and washers etc

(ii) INCOMING : - (a) MCCB 4P 160 Amps, Adj. thermal adj magnetic type,415 V, 3 phase, 50 Hz, 4 pole, 25 KA with ICS=100% ICU - 01 No (b) Multifunction meter with LCD display, accuracy class 1.0, having parameters KW, KVA, KVAh & PF duly prewired with suitable size of copper insulated FRLS wire with universal code including suitable CTs complete - 01 No. (c) Indicator with neon lamps for RYB , 3 Phase with MCBs set of three -01 set (iii) OUTGOING:- (a) MCB TPN 40Amp, 415 V, 10 KA- 06 Nos (b) Indicator with neon lamps for RYB , 3 Phase.

Supply, installation, commissioning and testing of factory made (CPRI approved) LT panel Board of Suitable size out door type (double door) 415 Volts, dust proof,vermin proof made out of CRCA sheet 3.15 mm thick duly compartmentalized inside panel with 2 mm thick CRCA sheet , to accommodate the incoming and outgoing each switch gear shall have be independent opening, and having provision for front and rear side opening with rubber beading and brass cable glands for each cable to make it weather and vermin proof. double door hinged type, both side openable, air fins for ventilation, panel shall be mounted on angle of size (50 x 50 x 6 mm) & duly spray painted with seven tank process internally and externally with two coats of synthetic enamel paint over a coat of red oxide primer supported on 04 legs of 750mm long, 300mm grouted in plain cement concrete blocks in 1:2:4 type B1 (using 20 mm graded stone aggregate) and 450 mm ground clearance or as per manufacturer instruction and including notice board & Danger plate complete with all connections incoming / out going complete all as directed by Engineer-in-charge. comprising of following accessories.(PANEL P-3) (i) Bus bar strip,four pole and capacity 250 Amps Al strip size based on 1.0 Amps per sqmm, coloured with plastic coated insulated and sleaves in four colours (Red,Yellow , blue and black ) fixed on porcelain insulators with necessary nuts and bolts and washers etc

(ii) INCOMING : - (a) MCCB FP 160 Amps, Adj thermal adj magnetic type, 415 Volts 16 KA with ICS=100% ICU- 01 No (b) Multifunction meter with LCD display, accuracy class 1.0, having parameters KW, KVA, KVAh & PF duly prewired with suitable size of copper insulated FRLS wire with universal code including suitable CTs complete - 01 No. (c) Indicator with neon lamps for RYB , 3 Phase with MCBs set of three -01 set (iii) OUTGOING:- (a) MCB TPN 40Amp, 415 V, 10 KA- 05 Nos (b) Indicator with neon lamps for RYB , 3 Phase .

Supply, installation, commissioning and testing of factory made (CPRI approved) LT panel Board of Suitable size out door type (double door) 415 Volts, dust proof,vermin proof made out of CRCA sheet 3.15 mm thick duly compartmentalized inside panel with 2 mm thick CRCA sheet , to accommodate the incoming and outgoing each switch gear shall have be independent opening, and having provision for front and rear side opening with rubber beading and brass cable glands for each cable to make it weather and vermin proof. double door hinged type, both side openable, air fins for ventilation, panel shall be mounted on angle of size (50 x 50 x 6 mm) & duly spray painted with seven tank process internally and externally with two coats of synthetic enamel paint over a coat of red oxide primer supported on 04 legs of 750mm long, 300mm grouted in plain cement concrete blocks in 1:2:4 type B1 (using 20 mm graded stone aggregate) and 450 mm ground clearance or as per manufacturer instruction and including notice board & Danger plate complete with all connections incoming / out going complete all as directed by Engineer-in-charge. comprising of following accessories:-(PANEL-P1A) (depth of panel should be of min 900mm) (i) Bus bar strip,four pole and capacity 1000 Amps Al strip size based on 1.0 Amps per sqmm, coloured with plastic coated insulated and sleaves in four colours (Red,Yellow , blue and black ) fixed on porcelain insulators with necessary nuts and bolts and washers etc

(ii) INCOMING : - (a) ACB 4 Pole, 415 V, 630 Amps 50 KA designed operational voltage 690 V, Horizontal drawout type motorized front operated with microprocessor -based protection release having password protection adjustable over load ,short circuit ,earth fault protection,the ACB shall have Ics=Icu=Icw for 1 Sec.ACB shall have over temperature protection features with 4 NO/NC auxiliary contacts.ACB shall also confirm to IEC 60947/IS-13947/Part-Ii 19993 latest version,protection unit must be with display to see current parameters & fault history with USB port to acess stored DATA of the release,Breaker shall be equipped with pre overoad and over temperature alarms.- 01 No (b) Multifunction meter with LCD display, accuracy class 1.0, having parameters KW, KVA, KVAh & PF duly prewired with suitable size of copper insulated FRLS wire with universal code including suitable CTs complete - 01 No. (c) Indicator with neon lamps for RYB , 3 Phase with MCBs set of three -01 set (iii) OUTGOING:- (a) DPX MCCB 4P 350 Amp ,36 KA with electronic S2(LSI) protection unit with energy metering - 01 Nos.

(b) MCCB 4P 100 Amp, 415 V, 16 KA, 4 pole with adjustable thermal and fixed thermal magnetic release -01 Nos. (c) MCCB 4P 63 Amp, 415 V, 16 KA, 4 pole with adjustable thermal and fixed magnetic fixed thermal magnetic release -02 Nos. (d) MCB TPN 40Amp, 415 V, 10 KA- 04 Nos (e) 3 phase astronomical timer- 01 Nos (f) Indicator with neon lamps for RYB , 3 Phase

Supply, installation, commissioning and testing of factory made (CPRI approved) LT panel Board of Suitable size out door type (double door) 415 Volts, dust proof,vermin proof made out of CRCA sheet 3.15 mm thick duly compartmentalized inside panel with 2 mm thick CRCA sheet , to accommodate the incoming and outgoing each switch gear shall have be independent opening, and having provision for front and rear side opening with rubber beading and brass cable glands for each cable to make it weather and vermin proof. double door hinged type, both side openable, air fins for ventilation, panel shall be mounted on angle of size (50 x 50 x 6 mm) & duly spray painted with seven tank process internally and externally with two coats of synthetic enamel paint over a coat of red oxide primer supported on 04 legs of 750mm long, 300mm grouted in plain cement concrete blocks in 1:2:4 type B1 (using 20 mm graded stone aggregate) and 450 mm ground clearance or as per manufacturer instruction and including notice board & Danger plate complete with all connections incoming / out going complete all as directed by Engineer-in-charge. comprising of following accessories:-(PANEL P2A) (i) Bus bar strip,four pole and capacity 400 Amps Al strip size based on 1.0 Amps per sqmm, coloured with plastic coated insulated and sleaves in four colours (Red,Yellow , blue and black ) fixed on porcelain insulators with necessary nuts and bolts and washers etc

(ii) INCOMING : - (a) MCCB 4P 250 Amp, 415 V, 25 KA, 4 pole with adj thermal magnetic release with ICS=100%ICU -01 Nos. (b) Multifunction meter with LCD display, accuracy class 1.0, having parameters KW, KVA, KVAh & PF duly prewired with suitable size of copper insulated FRLS wire with universal code including suitable CTs complete - 01 No. (c) Indicator with neon lamps for RYB , 3 Phase with MCBs set of three -01 set (iii) OUTGOING:- (a) MCB TPN 63Amp, 415 V, 10 KA- 06 Nos (b) MCB TPN 40Amp, 415 V, 10 KA- 03 Nos (c) Indicator with neon lamps for RYB , 3 Phase

Supply, installing, testing and commissioning of busbar box with factory fabricated prewired bus bar, cubical type of size 750mm x 750mm x 400 mm out door dust vermin proof, made out of 50x50x6mm angle iron frame/legs and 3.15mm thick CRCA sheet with openable shutters on both sides (front & rear), powder coated externally and internally, having locking arrangement mounted on four MS Iron leg frame 80cm high made of angle iron frame 30 x 30 x 5mm, embedded in accommodate the following accessories :- (i) MCCB 63 Amp, 415 V, 16 KA, 4 pole with thermal magnetic release Ics=100% Icu with spreader links (ii) Al bus bar 100 A for three phase and neutral (length min 550mm) duly insulated with sleeves of different colour RYB (iii) Volt meter-01 No (iv) Ampere meter-01 No with set of CTs (v) Indicator R,Y,B - 01 Set

Supply, installing, testing and commissioning of busbar box with factory fabricated prewired bus bar, cubical type of size 750mm x 750mm x 400 mm out door dust vermin proof, made out of 50x50x6mm angle iron frame/legs and 3.15mm thick CRCA sheet with openable shutters on both sides (front & rear), powder coated externally and internally, having locking arrangement mounted on four MS Iron leg frame 80cm high made of angle iron frame 30 x 30 x 5mm, embedded in accommodate the following accessories :- (i) MCCB 100 Amp, 415 V, 16 KA, 4 pole with thermal magnetic release Ics=100% Icu with spreader links (ii) Al bus bar 150 A for three phase and neutral (length min 550mm) duly insulated with sleeves of different colour RYB (iii) Volt meter-01 No (iv) Ampere meter-01 No with set of CTs (v) Indicator R,Y,B - 01 Set

Supply, installation, commissioning and testing of factory made (CPRI approved) LT panel Board of Suitable size out door type (double door) 415 Volts, dust proof,vermin proof made out of CRCA sheet 3.15 mm thick duly compartmentalized inside panel with 2 mm thick CRCA sheet , to accommodate the incoming and outgoing each switch gear shall have be independent opening, and having provision for front and rear side opening with rubber beading and brass cable glands for each cable to make it weather and vermin proof. double door hinged type, both side openable, air fins for ventilation, panel shall be mounted on angle of size (50 x 50 x 6 mm) & duly spray painted with seven tank process internally and externally with two coats of synthetic enamel paint over a coat of red oxide primer supported on 04 legs of 750mm long, 300mm grouted in plain cement concrete blocks in 1:2:4 type B1 (using 20 mm graded stone aggregate) and 450 mm ground clearance or as per manufacturer instruction and including notice board & Danger plate complete with all connections incoming / out going complete all as directed by Engineer-in-charge. comprising of following accessories:-(PANEL PN1, 'N' notation for NALWA RD) (i) Bus bar strip,four pole and capacity 400 Amps Al strip size based on 1.0 Amps per sqmm, coloured with plastic coated insulated and sleaves in four colours (Red,Yellow , blue and black ) fixed on porcelain insulators with necessary nuts and bolts and washers etc

(ii) INCOMING : - (a) MCCB 250 Amps, 4 pole, 25 kA with energy metering devices, Ics = 100% Icu, 415 volts, 50 Hz with phase barrier/phase seperator/spacer with copper spreader links - 01 No (b) Multifunction meter with LCD display, accuracy class 1.0, having parameters KW, KVA, KVAh & PF duly prewired with suitable size of copper insulated FRLS wire with universal code including suitable CTs complete - 01 No. (c) Indicator with neon lamps for RYB , 3 Phase with MCBs set of three -01 set (iii) OUTGOING:- (a) MCCB 4P 63 Amp, 415 V, 16 KA, 4 pole with fixed thermal magnetic release -04 Nos. (b) 3 phase astronomical timer- 01 Nos (c) Indicator with neon lamps for RYB , 3 Phase

Supply, installation, commissioning and testing of factory made (CPRI approved) LT panel Board of Suitable size out door type (double door) 415 Volts, dust proof,vermin proof made out of CRCA sheet 3.15 mm thick duly compartmentalized inside panel with 2 mm thick CRCA sheet , to accommodate the incoming and outgoing each switch gear shall have be independent opening, and having provision for front and rear side opening with rubber beading and brass cable glands for each cable to make it weather and vermin proof. double door hinged type, both side openable, air fins for ventilation, panel shall be mounted on angle of size (50 x 50 x 6 mm) & duly spray painted with seven tank process internally and externally with two coats of synthetic enamel paint over a coat of red oxide primer supported on 04 legs of 750mm long, 300mm grouted in plain cement concrete blocks in 1:2:4 type B1 (using 20 mm graded stone aggregate) and 450 mm ground clearance or as per manufacturer instruction and including notice board & Danger plate complete with all connections incoming / out going complete all as directed by Engineer-in-charge. comprising of following accessories:-(PANEL PN-2) (i) Bus bar strip,four pole and capacity 300 Amps Al strip size based on 1.5 Amps per sqmm, coloured with plastic coated insulated and sleaves in four colours (Red,Yellow , blue and black ) fixed on porcelain insulators with necessary nuts and bolts and washers etc

(ii) INCOMING : - (a) MCCB 200 Amps, 4 pole, 25 kA with energy metering devices, Ics = 100% Icu, 415 volts, 50 Hz with phase barrier/phase seperator/spacer with copper spreader links other fixing accessories complete. - 01 No (b) Multifunction meter with LCD display, accuracy class 1.0, having parameters KW, KVA, KVAh & PF duly prewired with suitable size of copper insulated FRLS wire with universal code including suitable CTs complete - 01 No. (c) Indicator with neon lamps for RYB , 3 Phase with MCBs set of three -01 set (iii) OUTGOING:- (a) MCCB 4P 63 Amp, 415 V, 16 KA, 4 pole with fixed thermal magnetic release -04 Nos. (b) Indicator with neon lamps for RYB , 3 Phase

Supply, installation, commissioning and testing of factory made (CPRI approved) LT panel Board of Suitable size out door type (double door) 415 Volts, dust proof,vermin proof made out of CRCA sheet 3.15 mm thick duly compartmentalized inside panel with 2 mm thick CRCA sheet , to accommodate the incoming and outgoing each switch gear shall have be independent opening, and having provision for front and rear side opening with rubber beading and brass cable glands for each cable to make it weather and vermin proof. double door hinged type, both side openable, air fins for ventilation, panel shall be mounted on angle of size (50 x 50 x 6 mm) & duly spray painted with seven tank process internally and externally with two coats of synthetic enamel paint over a coat of red oxide primer supported on 04 legs of 750mm long, 300mm grouted in plain cement concrete blocks in 1:2:4 type B1 (using 20 mm graded stone aggregate) and 450 mm ground clearance or as per manufacturer instruction and including notice board & Danger plate complete with all connections incoming / out going complete all as directed by Engineer-in-charge. comprising of following accessories:-(PANEL P1Z, 'Z' notation for ZORAWAR) (i) Bus bar strip,four pole and capacity 600 Amps Al strip size based on 1.0 Amps per sqmm, coloured with plastic coated insulated and sleaves in four colours (Red,Yellow , blue and black ) fixed on porcelain insulators with necessary nuts and bolts and washers etc

(ii) INCOMING : - (a) MCCB 315 / 320/ 350 Amps, 4 pole, 35 kA with energy metering devicesand Adjustable thermal magnetic release, Ics = 100% Icu, 415 volts, 50 Hz with with phase barrier/phase seperator/spacer with copper spreader links complete- 01 No (b) Multifunction meter with LCD display, accuracy class 1.0, having parameters KW, KVA, KVAh & PF duly prewired with suitable size of copper insulated FRLS wire with universal code including suitable CTs complete - 01 No. (c) Indicator with neon lamps for RYB , 3 Phase with MCBs set of three -01 set (iii) OUTGOING:- (a) MCCB 4P 100 Amp, 415 V, 25 KA, 4 pole with fixed thermal magnetic release -03 Nos (b) MCCB 4P 63 Amp, 415 V, 16 KA, 4 pole with fixed thermal magnetic release -03 Nos. (c) 3 phase astronomical timer- 01 Nos (d) Spare space for 01 Nos. 100A 4P MCCB. (e) Indicator with neon lamps for RYB , 3 Phase

Supply, installation, commissioning and testing of factory made (CPRI approved) LT panel Board of Suitable size out door type (double door) 415 Volts, dust proof,vermin proof made out of CRCA sheet 3.15 mm thick duly compartmentalized inside panel with 2 mm thick CRCA sheet , to accommodate the incoming and outgoing each switch gear shall have be independent opening, and having provision for front and rear side opening with rubber beading and brass cable glands for each cable to make it weather and vermin proof. double door hinged type, both side openable, air fins for ventilation, panel shall be mounted on angle of size (50 x 50 x 6 mm) & duly spray painted with seven tank process internally and externally with two coats of synthetic enamel paint over a coat of red oxide primer supported on 04 legs of 750mm long, 300mm grouted in plain cement concrete blocks in 1:2:4 type B1 (using 20 mm graded stone aggregate) and 450 mm ground clearance or as per manufacturer instruction and including notice board & Danger plate complete with all connections incoming / out going complete all as directed by Engineer-in-charge. comprising of following accessories-(PANEL P2Z) (i) Bus bar strip,four pole and capacity 400 Amps Al strip size based on 1.0 Amps per sqmm, coloured with plastic coated insulated and sleaves in four colours (Red,Yellow , blue and black ) fixed on porcelain insulators with necessary nuts and bolts and washers etc

(ii) INCOMING : - (a) DPX MCCB 4P 250 Amp ,36 KA with electronic S2(LSI) protection unit with energy metering - 01 Nos.- 01 No (b) Multifunction meter with LCD display, accuracy class 1.0, having parameters KW, KVA, KVAh & PF duly prewired with suitable size of copper insulated FRLS wire with universal code including suitable CTs complete - 01 No. (c) Indicator with neon lamps for RYB , 3 Phase with MCBs set of three -01 set (iii) OUTGOING:- (a) MCCB 4P 100 Amp, 415 V, 25 KA, 4 pole with fixed thermal magnetic release -01 Nos(Spare) (b) MCCB 4P 63 Amp, 415 V, 16 KA, 4 pole with fixed thermal magnetic release -04 Nos. (c) 3 phase astronomical timer- 01 Nos (d) Indicator with neon lamps for RYB , 3 Phase

M & L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends ; and cutting chases for HDPE/GI pipe, etc. and making good disturbed surfaces to existing after laying of pipes having girth exceeding 20cm.

Supply & install High mast pole 12.5 mtr High 12 sided polygon having hot dip galvanising as per IS, tubuler structure with BS EN 10025 as per IS-2062,in two section longitudinal and welded in one section with thickness of sheet 3mm top and 3mm bottom suitable for wind velocity as per IS-875 (part-3) 1987 with lightning protection finial GI with single spike of 1200 mm long with accessories, LED type aviation obstructions lights including wiring & connection and including necessary excavation, returning filling, removal of soil from site all and PCC foundation of high mast light as per manufacturer design having door opening of size 900mm x 250mm at base with close fitting door with allen key locking with base plate of size 520mm dia 25 mm thick (min) with 06 Nos foundation bolts of M24 and 750 mm long with PCD 750 mm including lantern carriage of ERW class-B MS Pipe NB 40 in round shape 600 mm (ID) with 6 arms duly welded having load carrying capacity 6 luminairies and accessories with double drum 2 winch of capacity 350 Kg (SWL)having motorised opearation with manual mode with control gear assembly with self lubricating in permanent oil bath including first fillof lubricant SAE-90/140 with two stainless steel wire rope 7/19 of 6 mm dia of grade AISI 316 provided with suitable thimbles and terminals with minimum breaking capacity 2350 Kg per rope including integral power tool suitable to operate on AC 440 Volts/240 Volts electric supply, single speed reversible type and trailing electric cable flexible with stranded copper conductor 25 sqmm 5 core having EPR/PVC insulated and PCP/PVC sheath IS marked complete all as specified and directed.

M & L for earthing complete with GI or steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground vertically in a pit not less than 2.25 meter below ground level with top edge of earth plate at a depth not less than 1.5 meter below level covered on all sides with alternative layers of charcol dust and common salt 15 cm thick connected to galvanised earth lead GI strip 32x6 mm by means of bolts, nuts, check nuts and washers of Galvanised Iron or steel with protection pipe earth wire protected by galvanized steel pipe light grade 40 mm bore from top of the earth plate electrode upto test point and watering pipe 20mm bore, GI light grade with funnel and wire mesh all as shawn in electrical plate No 3 of SSR Part-1 and connected to earthing test point all as specified or indiated and testing on completion, including PCC earth pit (1:3:6) type C-2 RCC covered with CI cover hinged with frame including excavation and earth work complete all as specified.

S & F LED flood light fitting of 120 watt in epoxy powder coated pressure die-cast aluminium housing with, heat resistant toughened clear glass fixed with SS screws controlled with potted CVCC type, BIS marked electronic driver duly enclosed of approved brand only in housing having protection against over voltage, short circuit and open circuit and surge protection against lightening of 4 KV minimum in circuit and 10 KV outside the driver but inside the fixture with IP-66, Class-1 protection for LED and control gear compartments with high power LED chips of rating 3 to 5 watt (maximum) with colour temperature 5700 K(max) with secondary optics modular independent lenses provided with casing and caping to minimize glare and for better distribution of light suitable for voltage band 120 volts to 270 volt, power factor 0.95 (minimum) having efficacy 140 lumens/watt on 12.5 mtr high mast pole all as specified and directed. Make: Bajaj/Philips/ Havells/ Wipro/ Note : (i) LED fittings shall be made in India and of standard size only. (ii) LED fittings shall have supporting LM-79 & LM-80 test certificate from govt approved NABL accredited Lab showing all the parameters duly signed by the local office bearer of manufacturer. (iii) LED fittings shall have 2 years written Warranty from local office bearer of manufacturer.

Supply, install, testing and commissioning of feeder pillar, of size 0.6 mtr x 0.5 mtr x 0.4 mtr, outdoor cubicle type weather and vermin proof totally enclosed made out of 3 mm thick CRCA sheet machine pressed, suitable to operate on 3 phase 4 wire system, 415 volts, 50 Hz with locking arrangement, bottom gland plate with sufficient numbers of circular cable entry holes including glands, prewired complete duly powder coated comprising with MCB TPN 40 Amp, C- Curve, 415 volts - 01 Nos, MCB TPN 32 Amp, C- Curve, 415 volts - 01 No. MCB SP 10 Amp, C- curve - 04 Nos, astronomical timer - 01 No, 4 pole contactor 415 V/230 V -01 No, rotary switch of motor for moving up / down the lantern carriage - 01 No. with supporting legs of angle iron of size 40 x 40 x 6mm of length 100 cm long duly grouted in PCC (1:3:6), 50cm below ground level and 50 cm above ground including construction of masonry platform complete all as specified.

Supply and fix heavy duty exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and GI louvers on outside of wall complete with three core connecting wire, fixing arrangements all as specified and directed.

Material and labour for cutting holes for exhaust fan of size 300mm dia sweep in brick walls built in cement mortar or cement lime mortar and stone walls built in line mortar for inserting holdfasts and making good dismantled portion in cement mortar (1:2:4) type B-1 as required, complete all as specified and directed

Material and labour for point wiring with 1.5 Sqmm, PVC insulated but unsheathed, stranded copper conductor single core FRLS cable, IS-694 marked, drawn through in and including non metallic rigid PVC surface casing capping medium grade 20x12mm (Minimum) or higher size as specified and cutting chasing on wall complete with all accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc./ fittings ISI marked and modular metal flush mounting box with white cover plate with frame, including 1.5 Sqmm stranded copper conductor PVC insulated FRLS cable green in colour as continous earth conductor connected to common earth and earth dolly with all accessories complete all as specified and directed for one exhaust fan point controlled by one switch SP one way.

Supply and fixing white modular switch 6 Amp, one way one module complete all as specified and directed

S&F ceiling rose surface type bakelite 65 x 50 mm three terminal complete all as specified.

Gupta Enterprises (BID ID -3448527)

Northern cable fault locatoers (BID ID -3442683)

Kaul Enterprises (BID ID -3442657)

CHOUDHARY AND SONS (BID ID -3448679)

M/S Inder Pal Singh (BID ID -3442429)

JAI DURGA CONSTRUCTION CO (BID ID -3441200)