IMPROVEMENT TO BLDG NO. P-39 (AIRMEN MESS) AT AF STN MAUNARI

Demolition Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and directed.

M/L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in 1:6 all as specified and directed.

Taking down cement plaster or cement lime plaster on brick or stone walls etc.Including raking out joints ,hacking for key, scrubbing down with water etc complete all as specified and directed.

Rendering 10mm thick on fair faces of brick work or concrete surfaces in Cement mortar 1:3 and finishing surfaces even and smooth without using extra cement complete all as specified and directed.

M&L white wash as in celing three coats on new surfaces complete all as specified and directed.

M&L synthatic enamal paint as in celing one coats on old surfaces with removal of old ceilling board & refixing same complete all as specified and directed.

M&L white wash as in celing 2 coats incl complete removal of old treatment surfaces complete all as specified and directed.

M & L for providing wall care putty not less than 2 mm thick all as specified and directed.

M & L rendering 15 mm thick in cement plaster 1:4 on fair faces of brick wk or concrete surface finishing the surface even and smooth without using extra cement .WPC used as per instruction of manufacturar. (Note:- WPC shall be measured & paid seprately.)

M&L for preparing new suface and applying two coats of cement based paint over a coat of primer all as specified and directed.

M&L for preparing old surface and applying two coats of cement based paint all as specified and directed.

Material & Labour for applying Two coats on of 100% Premium acrylic exteriyer emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm as directed by Engineer-in-Charge.

Supply only Integral waterproofing compound.

M & L rendering 15 mm thick in cement plaster 1:6 and finished even and smooth without using extra cement all as specified and directed.

M & L for preparation of new surfaces and applying 2 coats of OBD over a coat of primer all as specified and directed.

M & L for providing 2 coats of OBD over a coat of primer on old surfaces all as specified and directed.

M & L for preparation of old steel surface exceeding 10 cm width or girth and apply two coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

M & L for preparation of old wooden surface exceeding 10 cm width or girth and apply two coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

M&L Virified Ceramic tiles 10 mm thick Double charged / ultra chargedlight colour (square/ rectangular) polished, area of each tiles exceeding 0.42 to1.00 sqm, infloors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over 15mm thick screed bed in CM 1:4 complete all as specified

M & L for glazed ceramic coloured tiles 300x600 x 7to 8 mm , with colour & design as per dirceted by Engr in charge, fixed in verticle surface (ht up to 4.90 m using scafolding on own arranement) pointed in white or colour cement to match rendering 10 mm thick in CM 1 : 4 scred bed for fixing tile complete all as specified.

M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to including grinding and polishing over 15 mm cement screed base . Incl mirror polish complete all as specified .

M&L Granite (of any type)Rounding to edges of stone slabs one edge,such as in steps, cooking platform, andother similar situations complete all as specified .

M & L Solid PVC Wall Lining consisting of 5mm thickbut wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawingcomplete all as specified.

M & L 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing. Drawing complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed .

Taking down Chowkhats or frames with shutters not exc 1.5 sqm

Taking down Chowkhats or frames with shutters exc 1.5 sq. m but n exc 4 sq. m each

Refixing in same opening Chowkhats or frames with shutters not exc 1.5 sqm

Refixing in same opening Chowkhats or frames with shutters exc 1.5 sq. m but n exc 4 sq. m each

M & L floor door stopper of aluminium alloy body and tongue, anodized with rubber washer at bottom fixed with screw to body and fixed to door shutter, over all length of cover plate shall be 140 mm complete all as specified and directed.

S & F Rolled Mild Steel Framed work as in doors or Gates of angle or other section confirming to Fe 410 -W (Gde- E- 250) quality- A with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering and hanging and fixing complete all as specified and directed.

S & F anodised aluminium windows and ventilators with frames, shutters provided with including jointing cleat for fixing and including all fittings like handles, locks, latches etc complete all as specified in Drg No CE (AF)/NGP/TD-109/2012, Sheet 1 to 4/4.

M/L Machine cut kota stone slab in riser laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including Screed bed or bedding layer in CM 1:4 of 15 mm thick for laying floor finishes rubbing and polishing complete

S&F in repair Mirror polishing on marble/ granite/Kota stone/ stone work where ever required to give high gloss finish complete. ® 194.91 complete all as specified and directed .

S & F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick wood grain printed PVC sheet colour PVC sheet & edges will be painted to match with printed sheetplain colour PVC sheet reinforced with MS square tube complete all as specified and directed .

S & Fexisting door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer- in-charge

S & F second class hard wood plain, solid, straight chowkats and frames, wrought framed rebated on the solid, rounded or chamfered put together with glue, pinned at joints complete all as specified and directed

S & F in repair 30mm thick flush shutter, solid core construction with block board core and ply wood panels commercial type on both side completeas specified and directed for partition wall.

M & F for second class hardwood glazed and skeleton door shutters 30mm thick, open rebated and prepared to receive glass gauge etc edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, gauge etc complete

S & F sheet glass, 4 mm thick tinted shade ordinary quality and glazing with oil putty/rubber gasket in squares and complete all as specified and directed.

S & F in repairs stainless steel wire cloth 0.36mm nominal dia of wire & average width of aperture 1.40mm and fixed with stainless steel wire staples

S&F Aluminum anodised barrel tower bolt of extruded section and fixed 125 mm long complete all as specified and directed.

S&F 250mm aluminium alloy, anodised,sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing boltts and sliding bolts of extrude section or cast aluminium complete all as specified and directed . .

S&F ijn reapairs Butt hinges, heavy weight, cold rolled mild steel, and fixed 100mm long complete all as specified and directed .

S&F in reapairs Butt hinges, heavy weight, cold rolled mild steel, and fixed 75mm long complete all as specified and directed .

S&F in repair Rotational moulded polyethylene water storage tanks tripple layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I capacity 1000 ltr complete all as specified and directed .

S & F in repairs ball brass valves, high pressure, with polythelne float and fly nut in 20mm bore complete all as specified and directed.

S & F in repairs Vitreous China wash basin, white, flat back, of size 550x450mm including brackets(flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply compete all as specified and directed. Make-Cera,Hindware,Parryware etc

S&F in repairs looking mirror fancy type decorative pattrern 5 to 6 mm thick fixed on wall with stainless steel studs compete all as specified and directed. ( make-prayag Cat No 553 )

S&F in repairs 15mm bore Bib taps LONG BODY, chromium plated with crutch or butterfly handle, screwed down, crewed for iron pipe or for brass ferrule and fixed all as specified and directed.( make-prayag Cat No.6509 )

S&F in repairs 15mm bore Pillar taps, chromium plated with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and directed. ( make-prayag Cat No 6550 )

S&F in repairs 15mm dia chromium plated SINK- cock long body compete all as specified and directed ( make-prayag Cat No 6516 )

S&F in repair mild steel chromium plated PLATE RACK 0.85mm thick size 914 x 914 x 254 on SS brackets and fixing with decorative side ballusters both ends etc complete all as specified .( make-prayag Cat NoPSP-7 )

S&F in repair Stainless steel sink with double bowl made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets,connecting union overall size 1143 x 510x229 mmm ( make-prayag Cat N- PSS-10 )

S&F 110/100mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 110/100mm PVC (SWR) bends any radius complete all as specified and directed.

S&F 75 mm PVC (SWR) bends any radius complete all as specified and directed.

S&F 75 PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repair CP Angle valve 15 mm compete all as specified and directed.

S&F in repair waste pipe for wash hand basin 32mm/40mm dia compete all as specified and directed.

S&F in reapairs SS Soap dish, any type, fixed to plugs with chromium plated plugs with brass screws compete all as specified and directed.

S&F in reapairs CP Tubular towel rail, 20mm dia, D type, 60cm long between flanges compete all as specified and directed.

M&L for chipping of spalled and loose conerete and cleaning rust from re-inforcement by sand brushing scrubing down concrete surfaces with wire brushes cleaning with water allowed to dry applying a layer of zinc rich epoxy primer as antirust on all exposed surfaces of concrete and provide guniting in two layers over steel welded mesh 2mm dia of wire and total aperture 75mm, thickness of gunite n. exc 25mm thick (average thickness) using cement mortar 1:3 with OPC 43 grade cement mixed with polycreete admixture @2% by weight of cement or as per manufactures instructions and finally applying cement palster over gunite surfaces of required thickness to give an even uniform and smooth finish conforming to proper gerometrics in cement mortar 1:4 to match with the existing surface as in side soffits of slabs, chajjas, facias, parapets, columns and beams etc complete including necessary scaffolding, shuttering necessary chased to brick work or RCC members at any height upto four storey buildings incl revmoving of small trees shrubs etc all as specified (Note: steel welded mesh to be welded with the existing reinforcement). The cost of welded mesh to be welded with the exsting re-inforcement is deemed to be included in the quoted rate complete all as specified and directed.

Demolition of concrete of any description and in any position not otherwise specifically provided for

Taking up or down steel tubing & connection incl cleaning for refixing or removal from site for 15 mm dia pipe complete all as speicified and directed.

M & L for GI Tubing medium grade' 15 mm, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as speicified and directed.

Taking up or down steel tubing & connection incl cleaning for refixing or removal from site for 20 mm dia pipe complete all as speicified and directed.

M & L for GI Tubing medium grade' 20 mm, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as speicified and directed.

S&F in repair mild steel chromium plated curtain rod 25 mm dia with fixing with brackets and decorative finilas etc complete all as specified and directed

Taking / removing Re-Fixing only in repair mild steel chromium plated curtain rod 25 mm dia with fixing with brackets and decorative finilas etc complete all as specified and directed

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15cm thickness complete all as specified and directed by Engr-in-Charge.

M&L for PCC1:4:8 type D-2 using 40mm graded stone aggregate , as in foundation,filling & mass concrete as in sub base to floor etc complete all as specified and directed by Engr-in-charge.

M & L for 75mm Thick Cement concrete type C-1, 1:3:6 (20mm graded stone aggregate) in Plinth Protection etc. complete all as specified and directed by Eng-in-Charge.

M&L for providing 75 mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in floor, finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.

Demolition of cement concrete (reinforced ) of any description and in any position compete all as specified and directed.

M & L for cement concrete 1:2:4 type B1, using 20mm graded stone agg, in covers slabs complete all as specified and directed by the Engineer-in-Charge.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L mild steel deformed TMT bar 10 mm dia and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed by the Engineer-in-Charge

M & L preparation of roof treatment with APP polymeric water proofing water membrane all as given below :- (a) Taking down existing water proofing treatment , brick tiles and cleaning roof surface by washing and rubbing etc and removing retrieved material to a distance n.exc 500m where directed. (b) M & L for plastering 10mm thick in CM 1 : 3 using 100% coarse sand on roof surface including water proofing compound as per manufacturers instructions and as directed by Engr-in-Charge. (c) Applying a coat of bituminous primer conforming to IS : 3384 - 1986 @ 0.40 Ltrs/Sqm and allow to dry. (d) M & L for laying 4 mm thick APP modified polymeric water proofing membrane having weight 3.2 - 3.5 Kg/Sqm on prepared surface as per manufacturers instructions and over laps 10 cm and 15 cm longitudinal and traverse directions respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners.The membrane shall be torched into groove on verticle plane and grove sealed with cement mortar 1:3. (e) Applying two coats aluminium paint over membrane @ 1.20 Kg/Sqm and all as per specification and directed by Engr-in-Charge.

M&L PCC 1:2:4 type B-2 using 40mm graded stone aggregates as in roof padding etc all as specified and directed .

M & L preparation & treatment of Expansion/Crumple Joint all as given below :- (a) Taking down existing Expansion/Crumple Joint,water proofing treatment,brick tiles and cleaning joint surface by washing and rubbing etc and removing retrieved material to a distance n.exc 500m where directed. (b) M & L for plastering 10mm thick in CM 1 : 3 using 100% coarse sand at surface of expsansion/crumple joint including water proofing compound as per manufacturers instructions and as directed by Engr-in-Charge. (c) Placing the required dia of baker rods inside the joint before applying the sealant (d) Applying and filling the joint with Fosroc thioflex 600(pourable grade) two part polysulphide sealant upto required level.

S &F in repair Plain, 1.00mm th galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and vertical/ straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement as directed by Engr-in-Charge..

S&F rollers to sliding of partition complete all as specified and directed by the Engineer-in-Charge

Supply and fixing desert cooler metal body electric driven cooper wounded motor having nominal air flow delivery 6000 CuM per hour (or nearest size) aluminium blade with wood wool pad, water tank, float valve, drain plug 60-80lit capacity, suitable for operation on 230 volt, 50 Hz single phase ac supply ISI marked manufacture by Govt approved agency complete with fixing accessories all as directed.

M&L for taking down of existing wall mounted electric chimney including dismantling and reinstallation to existing location or new location with suitable fastners and anchors, testing and commissioning complete all as site required and directed by Engr-in-charge.

Supply, install, commissioning and testing of 550 lit Deep Freezer, BEE rating 4 star energy efficient, sturdy wheel for easy movement and adjustable -23 degree to -10 degree celcius temp range with min 60mm PUF insulation for retaining cooler longer, utilizes eco freindly R290 refigrant etc complete all as directed by Engr-in-charge.

Supply, install, commissioning and testing of 310L refrigerator, double door, frost free, multi air flow circulation with automatic temprature control, BEE rating not less than 3 star, refrigerant R-600a, CFC free, smart compressor etc complete all as directed by Engr-in-charge.

Supply, install, commissioning and testing of commercial Air curtain unit for prevention of dust and conditioned air losses, single phase, 220 V, 50HZ, made out of MS/CRCA sheet of minimum thickness 18 gauge finished with two coats of red oxide primer and final coat of synthetic enamel paint (oven baked) with MS -CRC 18 gauge square perforated suction grills, Aluminium alloy fans and single phase electric motor, nozzles etc, complete with fittings and accessories so as to produce 1 - 1.5m/sec air velocity at floor level for door opening size 64 x 78cm complete all as directed by Engr-in-charge.

Supply, fabricating and fixing of heavy duty iron stand suitable for desert cooler, made up of angle 25x25x5mm min with cross bracing, top frame with flat support with one coat of red oxide primer and two coats of synthetic enamle paint complete all as directed by Engr-in-charge.

Excavation in trenches not exc. 1.5 mtr wide and not exc. 1.5 mtr in depth for foundation , shaft well, cesspit, manholes, pier hole etc and not exc 10 sqm on plan and getting out in soft / loose soil complete all as specified & directed.

Returning, filling in, including, spreading, leveling, watering & well ramming in layers not exceeding 25 CM complete all as specified & directed.

S & F plug type bib taps, cast iron, screwed for iron pipe and fixed for 15 mm dia pipe complete all as specified and directed.

Supply and fixing of 15 mm bore GI pipe medium grade ISI marked as per IS:1239 with all new GI fittings, laid in trenches/wall complete all as specified and as directed.

Labour only for cutting /boring to plinth protection /hard standing/road etc in suitable depth and for laying /corssing to GI pipe 15mm dia in 45 CM depth minium complete all as directed. Note:- Quoted rate shall be included the cost of required material for repair to disturbed surface in existing.

Supply, installation, testing and commessioning of Busbar suitable for 415 volts 3 Phase 4 wire 50 Hz AC supply system out door type floor mounting along with factory made type weather proof, vermin proof and fabricated out of MS CRCA sheet 3.15 mm thick & frame angle of size 50x50x6mm having bus bar of aluminium 400 Amps cap three phase and one neutral fixed on insulator and bus bar insulated by coloured heat shrinkable sleeve & housed in specified compartment including powder coating internally externally the entire steel surfaces with outgoing MCCB 4 pole, 250Amp capacity, adjustable type with rupturing capacity 25 KA- 01 No.

M&L taking down of existing split air conditioner capacity up to 2.00 Ton shiftting and reinstallation with charging of gas R-22/R-32/R-410 as required in same Bldg location or another Bldg location incl factory made GI brackets out door mounting unit with nut bolt washer etc complete all as site works and directed by Engr-in-charge.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fitting such as switches, ceiling rose, pendants,regulators, sockets, lamp holders, light fittings etc removing old unserviceable material from site and serviceable material to site for keeping in safe custody and making good disturbed surfaces of wall, floor etc. all as directed.

Material and labour for point wiring including concealed rigid non-metallic PVC conduit pipe medium grade, ISI marked heavy duty in size 20 mm dia with 1.5 Sqmm FRLS IS-694 insulated unsheathed, multi stranded copper conductor cable, single core 1100 volt grade with modular type metal flush boxes in suitable size for mounting to modular switches/ sockets / fan regulators/ cover plate in as required module etc including FRLS insulated & unsheathed 1100 volts grade cable with multi stranded copper conductor of size 1.5 sqmm as continous earth wire complete including making good the disturbed surfaces for the following:- Note : Quoted rate shall be included cost of chasesing ,cutting, plastering and colouring etc to surface of wall / beam/ roof etc as site required matching with existed surface.

(a) One light/ Fan point controlled by one way indepdent switch.

(b) One 3 pin 5 Amps socket out let point on same board controlled by one switch.

(c) One 3 pin 5 Amps socket out let point on independent board controlled by one switch.

(d) All as per above item No-2 here in before point wiring for 15 Amps socket using 2.5 sqmm copper cable for phase and neutrl and 1.5 sqmm as earth wire complete.

(e) All as per above item No-2 here in before power point wiring using 4 sqmm copper conductor cable FRLS insulated unsheathed and unsheathed copper conductor of 2.5 sqmm as earth wire complete.

Supply and fixing modular switch, one way 6 Amps 1 module

Supply and fixing modular switch, one way 16 Amps 1 module

Supply and fixing modular socket 6 A, 2/3 pin combined 2 module

Supply and fixing modular socket 16 A, 3/5 pin combined 2 module

Supply and fixing Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp

Supply and fixing ceiling rose surface type 65 mm x 50 mm, 2 to 3 terminal.

Supply and fixing modular fan regulator step type 120W 2 module

Supply and fixing white cover plate with frame 2 module

Supply and fixing white cover plate with frame 3 module

Supply and fixing white cover plate with frame 4 module

Supply and fixing white cover plate with frame 6 module

Supply and fixing white cover plate with frame 8 module

Supply and fixing white cover plate with frame 12 module

Supply and fixing white blanking plate 1 module

Supply and fixing LED tube light fitting with frame, driver etc in 20 W 4 feet long white colour mounting on tow Nos of PVC round/ squire block on surface of wall / beam etc incl making all electric connection using three core copper cable drawn through in PVC flexible counduit pipe from ceiling rose to fittings complete as directed.

Supply and fixing LED tube light fitting with frame, driver etc in 10 W 2 feet long white colour mounting on tow Nos of PVC round/ squire block on surface of wall / beam etc incl making all electric connection using three core copper cable drawn through in PVC flexible counduit pipe from ceiling rose to fittings complete as directed.

S&F wall brackets lanterns in B22 brass aluminium cover cast aluminium body finished with polyurethane paint (with prior treatments)with acrylic window cover total length 393mm ,max projection breath 205mm,base provided 134mm X101mm for wall mounting all as specified and directed by engineer in charge.Make-Mepro/Crompton/Havells

S&F LED CLIO wall light 15 watt with UP-DOWN Luminaire with wall surface mounting using COB LED as light sourse and IP65 protection luminaire, corrosion resistant complete with all accessories including making proper base structure for fitting complete all as specified and as directed by Engr-in-Charge. Make-Crompton Greaves or equivalent in Havells/Phillips

Supply and install floor standing lamp for hall, height approx 1.6m, metal base and coloumn, fabric lampshade, standard holder, powder coated coated finish, 230 volt, 50Hz with 2m power cord complete all as specified and as directed by Engr-in-Charge

Supply and fixing LED flood light 30 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp.

Supply and fixing exhaust fan 380 MM sweep steel body heavy duty with louver mounting bracket ISI marked energy saving less noise capacitor type incl making hole in brick wall plastering colour coading and all site required work for disturbed surface matching with existing and making electric connection using three core copper cable drawn through in PVC conduit pipe complete all as specified and directed icluding taking down Old Fan and deposited to MES store yard

M&L for taking down ceiling fan for servicing/ cleaning/ painting/ marking MES no and refixing the same with fixing accessories and making connection using three core flexible copper cable drawn through in PVC flexible conduit pipe to existing location or diffrent location as directed by engr-in-charge Note : Colour of paint shall be approved by Deptt.

Supply and fixing as new ceiling fan in size 1200 MM sweep white colour BEE 5 star rated with brushless DC motor (BLDC) with set of sweep/ extension rod / "U" clamp and other accessories single phase 50 Hzs incl making electric connection using three core copper cable drawn through in PVC flexible conduit pipe complete.

Supply and fixing in replacement of heavy duty wall mounting fan heavy duty 450 mm sweep non capacitor bracket mounted type copper wound motor ISI marked 4 star rated energy saving with fixing accessories complete making necessary electric connection allas directed. Make ;- Usha model MAX Air W/F (white colour) or equivalent model of make Crompton Greaves / Havells / Khaitan/ Bajaj/ Orient

Supply and fixing in replacement geyser (water heater) storage vertical mount type energy saving capacity 25 Ltrs 5 star rated (body material-CRCA Plus PP, Tank Insulation-PUF, Tank material-Mild steel with glass lined coating, Other body features- Plastic outer body, Magnesium anode rod) conforiming to IS -13273 with fixing nut bolt washer and crome wire coverd inter connection pipe 60 cm long 15 mm dai, angle valve incl making all connection complete all as directed. Note ; Old geyser shall be deposited by contractor in MES Yard.

Taking down old unsv Tube light fitting and S&F recess mounted/ panel false ciling mounted LED fitting 36 watt LED luminiare size 2' x 2' with CRCA housing in white powder finish, high translucent PMMA diffuser provides soft glare free light suitable for surface/recess mounted openable cleanroom luminiare with IP 65 pre-wired connecting up complete with 3 core flexible cable white of size 23/0.0076 all as specified and directed by Engineer-in-Charge.

Supply and fix sheet metal enclosure distribution board TPN, 4 poles ,double door, 4 way with 400 Amps rated copper bus bar vertcal type with MCCB 4 pole 250 Amps 415 volt thermal megnatic base operated as incomer incl concealed in surface of wall and making all connection using gland , thembles in required size complete all as specified and directed Note; Quoted rate shall be included cost of MCCB , cutting plastering , colouring to surface of wall to be concealed etc all site required matching with existing surface.

Supply and fix sheet metal enclosure for MCB distribution board SPN, double door, 8 way with 200 Amp rated bus bar 230 Volts complete.

Supply and fixing MCB , SPN, 2 pole 220 volts , 40 Amps , "C" Curve 10 KA.

Supply and fixing MCB , single pole 215 volts , 6 - 32 Amps , "B" Curve 10 KA.

Material and labour for sub main wiring with two runs of single core PVC FRLS IS-694 cable with unsheathed multi-stranded copper conductor of size 10 Sqmm and drawing through in concelead rigid non metallic PVC conduit pipe medium grade heavy duty in suitable size with all necessary fittings including one run of FRLS insulated unsheathed stranded copper conductor cable of size 10 Sqmm as earth wire (green in colour) and connected to common earth dolly complete including taking down of old unserviceable sub main wiring complete all as specified and as directed. Note : (i) Two run of 10 sqmm with one run of PVC conduit pipe shall be measured agaist one unit. (ii) Cost of cutting /chasing/ plastering /colouring etc as site shall be included matching to disturbed surface all as existed.

All as above item but here in before three run of 4 Sqmm for phase ,neutral and earth wire with suitable size concealed PVC conduit pipe complete.

All as above item but here in before three run of 2.5 Sqmm for phase ,neutral and earth wire with suitable size concealed PVC conduit pipe complete.

All as above item but here in before three run of 1.5 Sqmm for phase ,neutral and earth wire with suitable size concealed PVC conduit pipe complete.

S&F Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated\ situation for loop earthing etc. as required 32x6mm galvanised iron strip

Supply and fixing of 15 mm bore GI pipe medium grade ISI marked as per IS:1239 with all new GI fittings, laid in trenches/wall complete all as specified and as directed.

M&L in replacement earthing complete with galvanized steel earth plate 600 x600 x 6mm thick, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized GI wire 4 mm dia as earthing lead by means of bolts, nuts, check nuts & washers of galvanized iron or steel besides building at all joints including excavation and earth work, GI pipe light grade 25 MM bore for protection of GI strip from earth electrode and 15 MM as watering with wiremesh funnel charcoal dust, common salt, PCC (1:2:4) type B-1 using 20mm graded stone aggregate for chamber and MS angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4) type B-1 using 20 mm graded stone aggregate reinforced with 6 mm dia round bars @ 75 mm C/C both ways with MS handle 12 mm dia , PGI funnel and wire mesh , 20 mm bore GI Pipe light grade for watering complete all as shown in electrical plate No 3 of SSR Part-I(2009) and connected to earth test point including testing complete all as specified and directed.

M&L in replacement earthing complete with galvanized steel earth plate 600 x600 x 6mm thick, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized 32x6mm galvanised iron strip as earthing lead by means of bolts, nuts, check nuts & washers of galvanized iron or steel besides building at all joints including excavation and earth work, GI pipe light grade 40 MM bore for protection of GI strip from earth electrode and 15 MM as watering with wiremesh funnel charcoal dust, common salt, PCC (1:2:4) type B-1 using 20mm graded stone aggregate for chamber and MS angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4) type B-1 using 20 mm graded stone aggregate reinforced with 6 mm dia round bars @ 75 mm C/C both ways with MS handle 12 mm dia , PGI funnel and wire mesh , 20 mm bore GI Pipe light grade for watering complete all as shown in electrical plate No 3 of SSR Part-I(2009) and connected to earth test point including testing complete all as specified and directed.

Note :- (i) Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. The contract amount shall be arrived at after deduction of Schedule of Credit from the total quoted amount in BOQ. (ii) Make of material shall be as per mentioned in Particular specifications or Appendix 'B' to Particular specifications as approved by AGE (I) AF manauri