Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.6 LAccepted-AOC FLAT NO 203 SEC 14 PLOT NO 142 SHIVSRUTI PARK APARTMENT E WING 1ST FLOOR MOSHI PRADHIKARAN TAL HAVELI DIST PUNE 412 105 | PUNE | MAHARASHTRA | 412105 | L1 | Accepted-AOC Awarded as first lowest bidder (L1) | |
| 2 | L2₹36.4 L+₹5.8 L (18.9%)Rejected-AOC FLAT NO 10 S NO 98 PLAT NO 78 SAI SAYAJI PARK A RIGHT BHUSARI COLONY KOTHRUD PUNE 411 038 | PUNE | MAHARASHTRA | 411038 | L2 | Rejected-AOC Being second lowest bidder (L2) | |
| 3 | L3₹39.1 L+₹8.5 L (27.8%)Rejected-AOC 704 SILVER DEAL DAFFODIL WING 1 B T KAWADE ROAD PUNE 411 001 | PUNE | PUNE | MAHARASHTRA | 411001 | L3 | Rejected-AOC Being third lowest bidder (L3) | |
| 4 | L4₹40.1 L+₹9.5 L (31.0%)Rejected-AOC PLOT NO 1134 1196 MORIVALI VILLAGE TAL AMBARNATH DIST THANE AMBERNATH 421505 | AMBERNATH | THANE | MAHARASHTRA | 421505 | L4 | Rejected-AOC Being forth lowest bidder (L4) | |
| 5 | Rejected-Technical | - | Rejected-Technical Not enlisted in Cat a(ii) |
Tender Value
Refer Docs
EMD Value
₹66,000
Closing Date
24 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GERD PASHAN PUNE
GERD PASHAN PUNE
REPAIR MAINTENANCE TO EXTERNAL WATER SUPPLY AND OTHER CONNECTED WORKS IN TECHNICAL AREA UNDER GE RD PASHAN
2023_MES_577546_1
GERD/PSN/TOKEN/54 OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
GERD PASHAN PUNE
As per tender
9 documents required · 9 mandatory
₹500
GERD PASHAN PUNE
₹66,000
Yes
3 Apr 2023
27 Jan 2023
27 Feb 2023
27 Jan 2023
24 Feb 2023
10 Feb 2023
27 Jan 2023 - 4 Feb 2023
Amount
Excavation in trenches not. exceeding 1.5 metre wide and not exc 1.5 metre in depth and getting out in soft soil complete all as specified and directed.
All as per item No 1 above but in hard/ dense soil.
Returning filling in trenches including spreading leveling watering and well ramming in layers not exceeding 25 cm in soils complete all as specified and directed.
Removing of surplus soil and depositing to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed by Engr-in-Chagre.
Taking up or down GI water tubing including removing of all necessary connections/fittings complete all as specified and directed by Engineer in Charge. (Note : excavation and earth work will be measured & piad separately) (a) Dia of pipe 15 mm
(b) Dia of pipe 20 mm
(c) Dia of pipe 25 mm
(d) Dia of pipe 40 mm
(e) Dia of pipe 50 mm
(f) Dia of pipe 80 mm
Relaying and refixing of GI pipe after descaling / cleaning complete with the help of water & brush of the following size pipe obtained from Sl item No 5 to 10 above and connect in old / new positions, laid in trenches fixed on wall on floor including providing necessary fittings such as bends, tee, unions, elbows, sockets etc complete all as specified and directed. (a) 15 mm dia.
(b) 20 mm dia.
(c) 25 mm dia
(d) 40 mm dia
(e) 50 mm dia
(f) 80 mm dia
Supply and fix GI tubing medium grade ISI marked fixed on wall, roof, floor complete with all accessories such as Tees union , bend ,elbow nipple reducer etc , all as required at site for branch connection including cutting threading complete all as specified and directed by Enginner-in-Charge. (a) 15 mm dia Pipe.
(b) 20 mm dia Pipe.
(c) 25 mm dia Pipe.
(d) 40 mm dia Pipe.
(e) 50 mm dia Pipe.
(f) 80 mm dia Pipe.
Material and labour for galvanized iron water tubing medium grade ISI marked laid in trenches complete with all accessories such as Tees union, bend, elbow nipple reducer etc all as required at site for branch connection including cutting threading complete all as specified and directed. (a) 15 mm dia Pipe.
(b) 20 mm dia Pipe.
(c) 25 mm dia Pipe.
(d) 40 mm dia Pipe.
(e) 50 mm dia Pipe.
(f) 80 mm dia Pipe.
Supply and fix in repair gun metal gate / globe valve with iron wheel head screwed both ends for iron pipe fixed complete all as specified and directed. (a) 15 mm dia
(b) 20 mm dia.
(c) 25 mm dia
(d) 40 mm dia
(e) 50 mm dia
(f) 80 mm dia
Material and labour for cutting of Roads / Plinth for removal / laying of pipe and making good the disturbed surfaces as per existing adjoining surfaces complete all as specified and directed. Note: PCC will be measured and paid separetely.
Material and labour for PCC 1:2:4 type B 1 by using 20 mm graded stone aggregate for making good road/foot path/hard standing/drain/ bldg plinth protection and foundation for motors, pumps and starters all as per site requirement and complete all as specified and directed by Engr-in-Charge.
Material and labour for construction of Valve pit of brick masonry walls 23 cm thick in cement mortar 1:4, rendering 15 mm thick plaster in cement mortar 1:4 internally including PCC coping 1:2:4 type B1 using 20 mm graded crushed stone aggregate, 150 mm thick PCC 1:4:8 type D2 using 40 mm graded broken stone aggregate sub base of floor, 50 mm PCC 1:2:4 type B1 using 20 mm aggregate crushed stone aggregate in floor finished even and fair with out using extra cement constructed complete with Mild steel sheet cover 3mm thick and angle iron frame of size 40x40x6mm duly painted with two coats of synthetic enamel paint over a coat of red oxide primer and including locking arrangement and lifting handle complete all as specified and directed of Size 750mm X 750mm X 1000 mm ( internal dimensions) complete all as specified and directed NOTE: Cost of Earth work in any type of soil,getting out, returning filling after construction and disposal of surplus soil is deemed to be included in quoted rates.
Material and labour for construction of Valve pit of brick masonry walls 23 cm thick in cement mortar 1:4, rendering 15 mm thick plaster in cement mortar 1:4 internally including PCC coping 1:2:4 type B1 using 20 mm graded crushed stone aggregate, 150 mm thick PCC 1:4:8 type D2 using 40 mm graded broken stone aggregate sub base of floor, 50 mm PCC 1:2:4 type B1 using 20 mm aggregate crushed stone aggregate in floor finished even and fair with out using extra cement constructed complete with Mild steel sheet cover 3mm thick and angle iron frame of size 40x40x6mm duly painted with two coats of synthetic enamel paint over a coat of red oxide primer and including locking arrangement and lifting handle complete all as specified and directed of Size 1500mm X 1500mm X 1100 mm ( internal dimensions) complete all as specified and directed NOTE: Cost of Earth work in any type of soil,getting out, returning filling after construction and disposal of surplus soil is deemed to be included in quoted rates.
Burning out leaking lead joints for CI pipes for the following sizes of pipes complete as specified and as directed . (a) 100 mm dia pipe
(b) 150 mm dia pipe
(c) 200 mm dia pipe
(d) 400 mm dia pipe
Material and labour for run lead joints for CI pipes / Fittings complete with necessary jointing material such as lead and spun yarn for jointing of pipes complete all as specified and directed by Engr-in- charge for the following sizes . (a) 100 mm dia pipe
(b) 150 mm dia pipe
(c) 200 mm dia pipe
(d) 400 mm dia pipe
Supply and fix in repair new stainless steel spindle with wedge nut for following sizes of sluice valve includilng all nut and bolts and all fixing material as required at site complete all as specified and directed by Engineer-in-charge. (a) Sluice valve size 80 mm dia
(b) Sluice valve size 100 mm dia
(c) Sluice valve size 150 mm dia
(d) Sluice valve size 200 mm dia
(e) Sluice valve size 400 mm dia
Supply and fix in repair Cast Iron air valves with two air outlets and fixing in cast iron water supply mains complete all as specified and as directed by Engr-in-Charge of following sizes:- (i) 100mm dia Pipe.
(i) 150mm dia Pipe.
Supply and fix in repair Cast Iron air valves with two air outlets, 25mm dia and fixing in cast iron water supply mains complete all as specified and directed by Engr-in-Charge
Supply and Fix in repair CI Sluice valve 100mm dia with stainless steel spindle PN-1.6 ISI marked IS No.14845-2000 including jointing material nut bolts packing all as per site requirement including machining work if required complete all as specified and directed by Engr-in-Charge. Make : Kartar/ Venus / BIR or as existing specification and make at site etc.
Supply and Fix in repair CI Sluice valve 150mm dia with stainless steel spindle PN-1.6 ISI marked IS No.14845-2000 including jointing material nut bolts packing all as per site requirement including machining work if required complete all as specified and directed by Engr-in-Charge. Make : Kartar/ Venus / BIR or as existing specification and make at site etc.
Supply and Fix in repair CI Sluice valve 200mm dia with stainless steel spindle PN-1.6 ISI marked IS No.14845-2000 including jointing material nut bolts packing all as per site requirement including machining work if required complete all as specified and directed by Engr-in-Charge. Make : Kartar / Venus / BIR or as existing specification and make at site etc.
Supply and Fix in repair CI Sluice valve 250mm dia with stainless steel spindle PN-I ISI marked IS No.14845-2000 including jointing material nut bolts packing all as per site requirement including machining work if required complete all as specified and directed by Engr-in-Charge. Make : Kartar/ Venus / BIR or as existing specification and make at site etc.
Supply and Fix in repair CI Sluice valve 400mm dia with stainless steel spindle PN-I ISI marked IS No.14845-2000 including jointing material nut bolts packing all as per site requirement including machining work if required complete all as specified and directed by Engr-in-Charge. Make : Kartar / Venus / BIR or as existing specification and make at site etc.
Material and labour for running welding including cleaning and preparing the surfaces to be welded together, holding the members in true position while welding and bevelling of edges complete as per site requirement and as directed by Engr-in-Charge.
Repair to water supply line (Raw/Fresh water) with mechanical joint of CI pipe line of size 80mm to 200mm including taking out the puncture/cracked existing pipe and transport to local workshop, cutting of damaged portion of pipe through welding/gas welding, making rough surfaces smooth and champhered by grinding and then connected through mechanical joint of adequate size with rubber rings both sides and fastener of required size and shape complete all as specified and directed. Note : Testing/commissioning the pipe line on full pressure after completion of the job shall be carried out and payment will made of this job after satisfactory results from the testing.
Material and labour for cleaning of CI/DI Raw / Fresh water pipe line of size 100mm to 200mm dia, removing of mud/sludge by scrapping/pressurise back water including making arrangement such as portable pump set, portable welding set and any other equipment as per site requirement all as directed by Engr-in-Charge
Overhauling the Centrifugal Pump set by dismantling the pump set opening, cleaning, greasing including replacement of spare parts and re-assembling after repairs including all required metalling, grinding, etc., transportation, reinstalling back to position and testing complete for 40 to 120 HP Pump sets of various types complete all as specified and directed by the Engr-in-Charge. Note : (i) Minor spares such as gland packing, gaskets, nuts, bolts, grease, various rings deemed to be included in the quoated rates. (ii) Major spares such as shafts, bearings, impellar, throught bush, coupling will be measured & paid seperately under respective items of Schedule as supply only.
Supply only spares for following pump sets to be incorporated in item no 63 here in before. Make : Kirloskar/ CG (a) Shaft sleeve
(b) Shaft sleeve nuts ( set of 4)
(c) Bearing cartridge DE/NDE
(d) Bearing cover DE/NDE (set of 2)Split gland coupling
(e) Bearing cap (set of 2)Wear Ring
(f) Bearing lock nut
(g) Throat bush (set of 2)
(h) Gland packing 10MMSQ
(j) DSM 100/36 set of Gaskets
(k) DSM 100/36 set of 'O' rings
(l) Bearing set for 40 to 120 HP pump set make Kirloskar or as required at site
Material and labour for disconnecting the electrical and mechanical connection of burnt electrical motors from the site / location including transporting to and from work shop, rewinding of electrical motors by dismantling and removing the burnt out copper winding wire, cleaning the slots of stator completely and winding polyster based super enamelled copper wire of same gauge of original one with 'F' class of insulation including varnishing and heating the coil and remove air bubbles complete from stator/rotor after rewinding reassembling all parts including reinstalling connection to original position and testing on full load complete all as specified and directed by Engineer in charge for 90 to120 HP three phase induction motor.
Dismantling after diconnecting of all electric connection of soft starter of any make and capacity suitable for up to 120 HP pumping set and transporting to authorised/manufacturer workshop for servicing, repair & testing and replacement of all unserviceable parts such as indicate lamp, conactor, push button wiring etc whichever required to make it serviceable in all respect including programmeable card as per recommendation of manufacturer and will be brought back to pump house and refixing/reconnection of electric connection on its original position and testing and commissioning with full load complete all as specified and directed by Engr-in-Charge
Material and labour for disconnecting the electrical and mechanical connection of burnt electrical motors from the site / location including transporting to and from work shop, rewinding of electrical motors by dismantling and removing the burnt out copper winding wire, cleaning the slots of stator completely and winding polyster based super enamelled copper wire of same gauge of original one with 'F' class of insulation including varnishing and heating the coil and remove air bubbles complete from stator/rotor after rewinding reassembling all parts including reinstalling connection to original position and testing on full load complete all as specified and directed by Engineer in charge for different capacity of motor as per following. (a) Up to 1 HP to 5 HP three phase monoblock motor
(b) 7 to 10 HP three phase mono block motor
(c) 0.5 HP single phase pressure pump motor
Supply and fix in repair pressure switch in existing pressure pump of 0.5HP complete all as specified and directed. Make: Schneider/ Danfoss/ Kirloskar
Supply and fix in repair water pump seal kits of pressure pump set of 0.5 HP complete all as specified and directed. Make: Schneider/ Danfoss/ Kirloskar
Supply and fix in repair pressure pump stage type including pressure switch automoatic control set 0.5 HP complete all as specifed and directed. Make: Schneder/ Danfoss/ Kirloskar
Supply only gland packing 10mm size complete all as specifed and directed.
Supply only gland packing 12mm size complete all as specifed and directed.
Supply only SG grease gde - I complete all as specifed and directed.
Cutting of existing cast iron pipe at site 100 mm dia for insertion of new branch line of any bore complete all as specified and directed.
Cutting of existing cast iron pipe of 150 mm dia for insertion of new branch line of any bore complete all as specified and directed.
Cutting of existing cast iron pipe of 200 mm dia for insertion of new branch line of any bore complete all as specified and directed.
Taking down old existing Cracked /unserviceable cast iron pipe of following sizes complete all as specified and directed. (a) 200 mm dia
(b) 150 mm dia
(c) 100 mm dia
Material and labour for CI pipes with spigot and socket ends centrifugally cast Class LA, in any length laid in trenches / laid in floors complete all as specified and directed for following dia of pipe :- Note:- Run lead joints and flange joints shall be measured and paid seperately. (a) 200 mm dia
(b) 150 mm dia
(c) 100 mm dia
Supply and fix in repair cast iron fitting (any type, radius and angle) taper any type (Straight) bend increasing decreasing or double socket etc Tee pieces, single branch ‘Y’ junction double branch, collar and plugs for up to 150 mm dia CI pipe conforming to IS-1538- 1976 complete and all as specified and directed.
Supply and fix in repair cast iron fitting (any type radius and angle) taper any type (Straight) bend increasing decreasing or double socket etc Tee pieces, single branch ‘Y’ junction double branch, collar and plugs for up to 200 to 300 mm dia CI pipe conforming to IS-1538- 1976 complete all as specified and directed.
Supply and fix mechanical joint made out of MS sheet fabricated as per existing site requirement including long MS nuts bolts rubber gasket cutting of pipe of any size GI/CI/MS pipe complete all as specified and directed by Engr-in-charge for 300mm bore pipe. (Note: Excavation and returning filling & removal etc included in quoted rate )
All as per item No.98 but for CI pipe 200 mm dia
All as per item No. 98 but for CI pipe 150 mm dia
All as per item No 98 but for CI pipe 100 mm dia
All as per item No 98 but for CI pipe 80 mm dia
Drilling and tapping GI pipe of water mains (in position) for branch connections of the internal dia 15/20/25 mm with fittings screwed both ends complete all as specified and directed.
Supply and fix in repair MS base plate 5 to 10mm thick suitable for 90 to 120 HP pumping set complete all as specified and directed
Supply and fix in repair Love Joy coupling heavy duty suitable for 90 HP motor complete all as specifed and directed.
Disconnection of existing water storage tank of PVC tank at 3.0metre height, removal of water if any from the tank and cleaning the bottom and internal periphery of the tank by using wire brushes to remove the Mud, Algae, fungus etc without damaging the water tank and finally rinsing the tank by using chlorine/bleaching powder/altoc GP or any other similar type of disinfectent chemical as directed by Engr-in-Charge and re-fixing in the position complete all as specified and directed at site for following capacities tank :- Note : Date of cleaning of tank to be indicated with removal/defacing of earlier date of cleaning as DD/MM/YYYY and also paste the reflactor stickers on all cleaned tank as "SAVE WATER" with white background and words in blue letters on each cleaned tank. (a) Capacity 500 litre
(b) Capacity 1000 litre
Supply and fix in repair Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position size 1000 litre all as specified complete all as specified and directed.
Supply and fix in repair cover/ lid to existing water tank 500 to 1000 litre capacity complete all as specified and directed.
AJAY ENTERPRISES
M/S - KRUPA ELECTRICALS
shakti engineering and electrical works
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .