Repair/Renovation of internal electric infrastructure of SDA office complex at Bemina Srinagar

Amount

Supply and Installation of 6 pin 15 A switch socket of SSK, Havells,Goldmedal,Standard,GM make in place of worn out/ damaged switch socket outlets incld cost of bakelite sheets wherever required.

Supply and Installation of3-5pin 5/6 A sockets and 6A switch alongwith bakelite flush plate of required size. SSK/Havells/Standard/GM/Goldmedal make.

Supply and Installation of3-5pin 5/6 A sockets of SSK/Havells/Standard/GM/Goldmedal make in place of worn out/ damaged socket outlets incld cost of bakelite sheets wherever required.

Supply and installation of 5/6 A switches/ bell push SSK/Havells/GM/Standard/Goldmedal make replacing damaged /worn out switches

Supply and Installation of 1200mm LED lighting fixture (batten) 20 watts

Sypply and installation of B22 base LED lamps 9 watt replacing damaged / fused lamps in corridors, washrooms etc (Phillips/Bajaj/ Havells/ osram / wipro make)

Supply and installation of fan speed control switches (dimmers)

Supply and installation of AC/DC bells

Supply and installation of ceiling Fans in different rooms including replacing old worn out/ damaged ones (Havells/ Standard/Orient)

Supply and installation of 300mm exhaust fans with gravity louvers. (Havells/Standard/Alsthom)

Supplying and fixing following pole & rating 240/415 V, 10 kA, "C" curve, miniature circuit breaker in the existing MCB DB complete with connections, testing and commissioning etc. as required. (Legrand/Havells/ Hager/ABB). 100A four pole isolator

63 A TPN MCB

40A TPN MCB

63 A DP MCB

40A DP MCB

6-32A SP MCB

Supply and installation of phenolic laminated sheets as per requirement at site

Supply and installation of 25mm (2mm thick) PVC channels

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). 6 way (4 + 18), Double door

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as require

ii) Distribution Board fitted with TPN Bus Bar and suitable to house 200A MCCBs and 6 no DP MCBs and SP MCBs(excld MCCB/MCB)

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. (Legrand/CG/L&T/ABB/Hager/C&S( i). 200A 36KA, FPMCCB)

ii) 100 A,30KA,FPMCCB

iii). 200A 4pole on load changeover

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. (Havells /KEI /Polycab / Anchor ) i) 3 x 1.5 sq. mm

ii) 3 x 4 sq. mm

iii) 3x2.5 sq mm

supply and installation of XLPE/PVC insulated aluminium conductor cables as below. i) 2 core 25 sqmm

ii) 3.5 core 25sqmm

iii) 3.5 core 120 sqmm

Supply and installation of fancy wall brackets fitted with 8-11W LED lamp.

M/S A M ELECTRICAL AND MECHANICAL ENGINEER