SPL REPAIR TO JCOs/ORs MD ACCN BLDG NO 588 12 X QTRS AT THIMAYYA COLONY, AND BLDG NO P 862, AT SS COLONY IN THE AOR OF AGE B/R I UNDER GE 864 EWS

Amount

Taking down chowkhats or frames n exc 1.5 Sqm each (without taking off shutters from the frames) all as specified and directed.

Taking down chowkhats or frames exc 1.5 Sqm but n. exc 4.00 Sqm each (without taking off shutters from the frames) all as specified and directed.

Taking down shutters of any description n exc 1 sqm each all as specified and directed.

S&F 2nd class soft wood (Kail), plain straight, solid chowkhats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, factory made all as specified and directed.

S&F factory made 2nd class hard wood 35mm thick plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkhats, all as specified and directed.

S&F factory made 35 mm thick, 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Part-I Section 8 Clause 8.24(a), etc complete all as directed by Engineer-in-charge.

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete as specified and directed.

S&F 18/19mm prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination fixed with screws to timber frame work, including side beading etc., complete all as specified and directed.

S&F factory made solid PVC door frames of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified & directed.

S&F factory made solid panel PVC door shutter, 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded, plain colour PVC "C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as per specification and drawing and directed.

S&F 100mm long butt hinges heavy weight cold rolled mild steel & fixed to chowkhats all as specified.

S&F aluminium anodised barrel tower bolts of size 150 mm long extruded section and fixed all as specified and directed.

S&F 150mm long aluminium handle cast type anodised all as specified and directed.

S&F aluminium alloy anodised sliding door bolt of size 250 mm long with hasp, staple and fixing clips of sheet, cast or extruded sections and fixing all as specified and directed.

S&F MS 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F 150mm floor door stopper of aluminium alloy body and tounge,anodised,with hard drawn steel spring ,fixed in floor complete as all as specified and directed.

S&F aluminium powder coated (powder coated of required colour) three track sliding windows frame top & sides of size 92 x 31.75 x 1.50mm (section No 20831), bottom of size 92 x 31.75 x 1.50mm (section No 20832) and shutter top & bottom of size 40 x 18 x 1.55mm (section No 20736) and side (handle) of size 40 x 18 x 1.55mm (section No 20738) and lock side shutter frame of size 40 x 18 x 1.45mm (section No 20737) and for wire gauge shutter of size 18 x 43.50 x 1.35mm (Section No.20791) with locking arrangement including stainless steel wire mesh 0.36 mm nominal dia of wire with 1.40mm average aperture and fixed with stainless steel wire staples and providing 5.5mm thick tinted glass with necessary rubber beading gasket and aluminium (anodised) grill, square, rectangular or similar section, fixed with channel of size 38 x 12 x 13mm etc including making good to the disturbed surfaces to match with existing surfaces complete all as specified and as directed.

S&F aluminium (powder coated with approved colour) ventilator, partially glazed and partially louvers, outer frame & mullion fabricated with aluminium section of size 82.50 mm x 38.00 mm x 1.70 mm thick (Cat No 20036), half portion glazed with 4 mm thick frosted glass including rubber beading, & glazing clip, half portion louvers of 80 mm wide & 4 mm thick frosted glass including aluminium louver patti including S.S wire gauge of fixing of 0.36mm dia and 1.40 width of aperture with 25x3mm think aluminium strip with screw to upper half portion of ventilator all fitting & fixture and fixed in position and aluminium (anodised) grill, square, rectangular or similar section, fixed with channel of size 38 x 12 x 13mm etc complete all as specified and directed.

S&F in repair curtain rails, Harrison rail, aluminium alloy chromium plated with fixing brackets, stops, rollers etc. all as specified and directed.

Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. at the places out side the premises complete all as specified and directed.

M&L 15mm thick rendering on brick work or concrete surface in CM 1:4 to be finished even and smooth without using extra cement all as specified and directed.

M&L 15mm thick rendering on brick work or concrete surface in CM 1:4 to be finished even and smooth without using extra cement and including taking down cement plaster from brick walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L 15mm thick rendering on brick work or concrete surface in CM 1:6 to be finished even and smooth without using extra cement all as specified and directed.

M&L 15mm thick rendering on brick work or concrete surface in CM 1:6 to be finished even and smooth without using extra cement and including taking down cement plaster from brick walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L rendering 5mm thick in cement mortar 1:3 & finishing the surface even & smooth without using extra cement as in ceiling, soffits of slab complete all as specified & directed.

M&L rendering plaster 5mm thick in cement mortar 1:3 & finishing the surface even & smooth without using extra cement as in ceiling, soffits of slab and including taking down cement plaster from brick walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer all as specified and directed.

M&L preparing surface of newly plastered walls and applying two coats of oil bound distemper over and including chalk whitening preparatory to distempering all as specified and directed.

M&L preparing newly prepared surfaces of ceiling and applying two coats of oil bound distemper over and including chalk whitening preparatory to distempering all as specified and directed.

M&L preparing old surface of walls and applying one coats of cement base paint all as specified and directed.

M&L preparing old surface of walls and applying one coat of oil bound distemper all as specified and directed.

Dismantling boarding , any description , fixed in any position with nails, all as specified.

S&F 20 mm thick, second class hard wood boarding clean sawn, planed one side with butt joints and fixed with nails in any situation as in eaves board, etc complete as specified and directed.

S&F 12mm prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work all as specified and directed.

S&F 18/19mm prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, including side beading etc., complete all as specified and directed.

S&F 75mm long butt hinges medium weight cold rolled mild steel & fixed to chowkhats all as specified.

S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of brass, polished all as specified and directed.

S&F ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed all as specified and directed.

Dismantling timber scantling 40 sq cm & over in section , any position in unframed work all as specified and directed.

S&F 2nd class soft wood clean sawn timber fixed in scantling all as specified and directed.

S&F 2nd class soft wood clean sawn timber fixed in scantling and including dismantling timber scantling 40 sq cm & over in section , any position in unframed work all as specified and directed.

Dismantling of wall & celling boards (fibre pulp insulation etc) or insulation boards/slabs/blankets any thickness, including cover fillets all as specified and directed.

M&L for 6mm thick plywood, grade BWR, type BB, fixed with nails to timber frame work, fixed in ceiling complete all as specified and directed.

M&L for 6mm thick plywood, grade BWR, type BB, fixed with nails to timber frame work, fixed in ceiling and including dismantling of old wall & ceiling boards including cover fillets complete all as specified and directed.

S&F 6mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative one face veneers on faces fixed in ceiling with screws to timber frame work as specified and directed.

S&F second class soft wood (Kail) plain fillets square, rectangular or triangular in section, clean sawn, secured with nails, cross sectional area exc 6 and n.exc 13 Sqcm as specified and directed.

M&L preparation of new wood or wooden surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified & directed by Engineer-in-charge.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheeting 0.50 mm thick any colour having tensile strength 550 Mpa as in roof coverings/cladding to wall, fixed with self tapping screws etc complete all as specified & directed by Engineer-in-charge.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheeting 0.50 mm thick any colour having tensile strength 550 Mpa as in roof coverings/cladding to wall, fixed with self tapping screws and including dismantling old plain or corrugated steel sheeting, any gauging, thickness, in roof covering complete all as specified & directed by Engineer-in-charge.

S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge, hips , valley gutters, drip and straight flashing(length and girth as fixed), fixed with self tapping screws complete all as specified & directed by Engineer-in-Charge.

S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge, hips , valley gutters, drip and straight flashing(length and girth as fixed), fixed with self tapping screws and including dismantling old plain or corrugated steel sheeting, any gauging, thickness, in roof covering complete all as specified & directed by Engineer-in-charge.

Demolition of cement concrete (un reinforced) in ground floor and paving n.exe 15 cm thick (below or above ground level) complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish of the premises, complete all as specified and directed.

M&L for 25mm thick cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in sub base finishing even and fair to receive to top layer complete all as specified & directed.

M&L vitrified ceramic light shade tiles 10 mm thick (square/ rectangular polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in cement to match white or coloured over and including 15mm thick screed bed in cement mortar 1:4, complete all as specified and directed

M&L vitrified ceramic light shade tiles 10 mm thick (square/ rectangular polished, area of each tiles not exceeding 0.36 sqm, in wall etc. set and jointed in neat cement slurry and pointed in cement to match white or coloured over and including 10mm thick bedding layers in cement mortar 1:3 complete all as specified and directed.

M&L vitrified ceramic light shade tiles 10 mm thick (square/ rectangular polished, area of each tiles not exceeding 0.36 sqm, in wall etc. set and jointed in neat cement slurry and pointed in cement to match white or coloured over and including 10mm thick bedding layers in cement mortar 1:3 and including dismantling tiling including CM bedding (but not backing) etc., complete all as specified and directed.

M&L non - skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over and including 15mm thick screed bed in cement mortar 1:4 , complete all as specified and directed

M&L glazed ceramic colour tiles in vertical surface 350x 250 / 450X350 and 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick bedding layers in cement mortar 1:3 complete all as specified and directed.

M&L glazed ceramic colour tiles in vertical surface 350x 250x / 450X350 and 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick bedding layers in cement mortar 1:3 and including dismantling tiling including CM bedding (but not backing) etc. complete all as specified and directed.

M&L 75 mm thick, plain cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) as in plinth protection / hard standing etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand 1:2 complete as specified and directed.

M&L PCC 100mm thick, 1:2:4 type B-2 (using 40 mm graded crushed stone aggregate) as in foot path ,finished fair and even complete all as specified including necessary form work complete all as specified & directed.

M&L PCC 75mm thick, 1:2:4 type B-2 (using 40 mm graded crushed stone aggregate) as in foot path ,finished fair and even complete all as specified including necessary form work complete all as specified & directed.

M&L for chequered cement concrete tiles 30cm X30cmX25mm thick set, jointed and pointed in neat cement slurry in floors with grey cement and with grey cement and pigment over and including 15mm thick screed bed in cement mortar 1:4, complete all as specified and directed

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position all as specified and directed.

M&L use and waste the form work to soffits of suspended slab such as roof slab, landings and similar work (horizontal or sloping) for fair finished surface exc 200 mm thick all as specified and directed.

M&L RCC 1:2:4, type B1 (using 20mm graded stone aggregate) as in slabs supported on walls beam and columns in floors, roofs, landing, deck slabs and shelves and the like all as specified and directed.

M&L RCC 1:2:4, type B1 ( using 20mm graded stone aggregate) as in slabs supported on walls beam and columns in floors, roofs, landing, deck slabs and shelves and the like and including dismantling of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position complete all as specified and directed.

S&F TMT steel bars 10 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking end and binding with and including MS wire annealed not less than 0.9 mm dia all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar all as specified and directed.

M&L for granite (of any type) work ,20 mm thick, (table rubbed and polished) in steps jambs , pillars ,window cills ,cooking platforms ,and the like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite laid over and including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and directed.

M&L for granite (of any type) work ,20 mm thick, (table rubbed and polished) in steps jambs , pillars ,window cills ,cooking platforms ,and the like in cement mortar 1:3 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite laid over and including 15mm thick screed bed or bedding layer in CM 1:4 and including demolition of stone slabs and tiles of any description or thickness complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 15 mm dia all as specified and directed.

S&F 15 mm dia GI tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 20 mm dia all as specified and directed.

S&F 20 mm dia GI tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors all as specified and directed.

M&L for lagging to pipes of internal dia 15 mm used in internal water supply or plumbing all round with, 25 mm thick bonded mineral wool preformed 'SNAPON' pipe sections of density 144 Kg/cum conforming to IS-9842 with 0.01 mm aluminium foil all as specified and directed.

M&L for lagging to pipes of internal dia 20 mm used in internal water supply or plumbing all round with, 25 mm thick bonded mineral wool preformed 'SNAPON' pipe sections of density 144 Kg/cum conforming to IS-9842 with 0.01 mm aluminium foil all as specified and directed.

S&F plate rack of overall size 600 x 600 x 250mm, made out of 0.63mm thick stainless steel sheet and hanging arrangement, fixed as in repairs complete all as specified and directed.

S&F in repair kitchen sinks with drainage board made of stainless steel 1mm thick with plugs, washers and waster, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410 x 330 x 160mm all as specified and directed.

S&F in repair corner glass shelf size 300mm for bathroom fitting, all as specified

S&F in repair glass shelf size 500x60mm for bathroom fitting all as specified and directed.

S&F in repair wall mixture 2-in-1 in bathroom and sink mixture for kitchen all as specified and directed.

S&F in repair tubular towel rail 20mm dia, D type, 60cm long between flanges brass chromium plated all as specified and directed.

S&F in repair 125mm chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed.

S&F in repair 15 mm bore CP Bib taps fancy type, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and directed.

S&F in repair Stop valves/ angle valve 15mm bore fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed all as specified and directed.

S&F in repair wash hand basin vitreous china size 550x400mm white flat back including CP pillar tap heavy duty as approved by GE ,waste, chain plug, PVC connection, pvc waste pipe completed all as specified and directed.

S&F in repair 15mm bore CP Mixer for mixing hot & cold water screwed down for iron pipe and fixed for WHB / Sink with double action complete all as specified and as directed

Demolition of cement concrete of any description and in any position not otherwise specifically provided for all as specified and directed.

M&L for rendering 15mm thick, in cement mortar 1:3 on concrete/brick work of sunken portion, mixed with Dr Fixit pidiproof LW+ or equivalent @ 200ml/50Kg of cement and fixed 32mm GI pipe spout each room complete all as specified and directed.

M&L for applying two coats of flexible polymer acrylic water proofing coating, 1mm thick (Dry film in two coats) using Dr Fixit pacific 2K of M/S Pidilite Industries or equivalent including necessary pond testing for 48 hrs in sunken portion complete all as specified and directed.

M&L for treatment to sunken stab by applying bituminous primer @ 0.5 Kg/Sqm over the prepared surface and hot blown cutback bitumen @ 0.70 Kg/Sqm providing and laying polythene film 150 micron thick with cutback bitumen adhesive on min 15cm overlap complete all as specified and directed by Engr in Charge.

M&L for plain cement concrete 1:5:10, type E2 (using 40mm graded stone aggregate) in sunken floor surface finished fair and complete all as specified and as directed.

M&L Providing plain cement concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregate) 25mm average thickness as in sunken floor of wc/bath/toilet finished even and smooth without using extra cement mixed with water proofing compound Dr Fixit pidiproof LW+ or equivalent at 200ml/50kg of cement all as specified and as directed.

S&F in repairs, vitreous china squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe), with integral foot rest including provision of lime concrete bedding, connection to trap and anti siphonage pipe etc complete including making good to floor as specified and directed.

M&L for vitreous china wash down water closet (pedestal pattern), white (excluding fixing bolts, flushing cisterns and flush pipe) complete all as specified and directed.

S&F in repairs PVC flushing cisterns 10 ltrs capacity including flushing pipe and connection complete all as specified.

S&F in repair PVC connection of PTMT nuts 15x450mm long all as specified and directed.

S&F in repair grating doom 75 mm dia with waste hole of PTMT.(minimum weight 25 gms) with grating for suitable size all as specified and directed.

Taking down PVC pipes including all fittings like shoes, bends, swan necks etc of any dia all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, fixed to wall all as specified and directed.

S&F 75 mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, fixed to wall all as specified and directed.

S&F in repair 110 mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, fixed to wall all as specified and directed.

S&F in repair 75 mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, fixed to wall all as specified and directed.

S&F PVC (SWR) bends 110 mm dia any radius all as specified and directed.

S&F PVC (SWR) bends 75 mm dia any radius all as specified and directed.

Dismantling unserviceable storage water tank of capacity , exc 500 Ltrs but not exe 1000 Ltrs all as per specified and directed by Engr- in- Charge.

S&F rotational moulded triple layered polyethylene water storage tank (cylindrical, vertical with closed top) hoisted and fixed in position including all accessories of capacity 1000 ltrs, including S&F ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 20 mm dia all as specified and as directed

S&F rotational moulded triple layered polyethylene water storage tank (cylindrical, vertical with closed top) hoisted and fixed in position including all accessories of capacity 500 ltrs, including ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 20 mm dia all as specified and as directed

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved on plan to any radius built in CM 1:6 in brick walls all as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved on plan to any radius built in CM 1:6 in brick walls and including demolition of brick work built in cement mortar or cement lime mortar etc all as specified and directed.

M&L for stone walling of random , uncoursed well bonded, bedded and solidly hearted built in CM 1:6 all as specified and directed.

All as Ser Item No per 117 here-in-before but except stone.

Extra over walling hammer dressing with max depression on face from straight edge held against the dressed surface n exc 20mm all as specified and directed.

M&L providing precast cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate) set in cement mortar 1:6 in window or door cills, lintels, steps coping, bond stone, kneelers, pier caps, columns, post etc. and setting in mortar complete with joints to match all as specified and directed.

M & L raised pointing to random or polygonal rubble, uncrushed or brought up to course in CM 1:3 all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, or under road/PCC path/hardstanding or for laying of cable etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete as specified and directed.

M&L PCC 1:2:4, type B1 ( using 20mm graded stone aggregate) as in providing, cement concrete cills, steps, parapets and railings up to 60cm in height, copings, kneelers, apex stones, bed plates, kerbs including necessary form work all as specified and directed.

M&L 150mm Salt-glazed stoneware drain pipes laid in trenches and jointed as specified

M&L PCC 1:4:8 type D2 ( using 40mm graded stone aggregate) as in bed to drain pipes 150 mm bore including packing under and haunching against the sides of pipes after they are laid and tested all as specified and directed.

Returning, filling in, including spreading levelling, watering and well ramming in layers n exc 25 cm in soft/loose soil all as specified and directed.

Removing excavated material to a distance not exceed 50 m and depositing where directed at a level next 1.5 m above the starting point all as specified and directed by EIC.

M&L precast cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in landings, shelves, cover slabs (manholes etc) and similar articles with plain faces, set in cement mortar 1:6 with and including necessary form work complete all as specified & directed by Engineer-in-charge.

M&L for taking down carefully existing old burnt out / unserviceable aluminium / copper point wiring system any type/ size and any description complete for light, fan,bell,socket, power points etc complete including removing the all type of fittings & fixture alongwith it connected fixing accessories such as all switches, sockets, ceiling roses, holder, regulators, bell etc complete and removing of all the old materials from the site for to taking as a schedule of credit Including making good to disturbed surfaces to match with existing surfaces complete all as specified and directed by EIC .

M&L for making single phasing point wiring system used as copper conductor wire for phase and neutral wiring system the wire made out of PVC insulated FRLS of 1100 Volts grade with having multistranded copper conductor wire of size 1.5 Sq.mm (Nominal area) ISI marked drawn through wiring system surface on wall with the help of heavy duty ISI mark PVC casing capping strip in any length wiring system and along with its all connected fittings accessories including providing of pressed steel terminal sunken box 1.2 mm thick or heavy duty PVC box and duly fixed it concealed in wall or surface on wall and overed to top with electro plated 3 mm thick plastic laminated sheet for housing / mounting of switches sockets, regulators etc and including using /drawing of one run of single wire 1.5 sqmm PVC insulated FRLS wire 1100 Volts grade ISI marked with multistranded copper conductor wire used as a continuous earth wire for point wiring complete system and including making the good to all disturbed surfaces of wall/ceiling area of new wiring system and to match to it as per the existing surface of wall/ceiling etc for one light point / fan point controlled by one switch of one way point wiring system complete, all as specified & directed by EIC.

All as per ser item No 130 here-in-before but one 3/5 pin type 5 Amp socket outlet point fixed on same board and controlled by one switch of one way point wiring system complete

All as per ser item No 130 here-in-before but one 3/5 pin type 5 Amp socket outlet point fixed on independent board and controlled by one switch of one way point wiring system complete.

All as per ser item No 130 here-in-before but one bell point and controlled by one bell push switch of one way point wiring system complete

All as per ser item No 130 here-in-before but using single runs of PVC insulated FRLS wire ,1100 Volts grade with multistranded copper conductor wire of size 2.5 Sq. mm (Nominal area) (ISI Marked) for15 Amp socket outlet point wiring system with controlled by one way switch and also providing of 2.5 sqmm PVC insulated FRLS wire , 1100 Volts grade (ISI Marked) with multistranded copper conductor wire used as continuous earth wire complete all as specified and directed by EIC.

S&F switch piano flush type single pole one way 5/6 Amps all as specified and directed.

S&F of socket outlet two in one 3/5 pin multi pin type 5/6 Amps all as specified and directed.

S&F of switch flush type single pole one way 15/16 Amps all as specified and directed.

S&F of socket outlet two in one 5/6 pin multi pin type 15/16 Amps all as specified and directed.

S&F of bell push flush type single pole one way 5/6 Amps all as specified and directed.

S&F of bell ding dong Type, 220 volt AC, Single Pole complete all as specified and directed.

S&F ceiling rose 03 terminals type made out of polycarbonate , isolated body complete all as specified and directed.

S&F of step type electronic fan regulator flush type with having hum free step alongwith speed control know suitable for single phase complete all as specified and directed.

S&F of LED tube light fitting of 1x 20W/22W 220V AC decorative box type with driver, holder including LED tube light with having energy efficient type complete including providing of suitable type flat flexible cable for electric connection from ceiling rose to fitting complete all as specified and directed .

S&F of LED mirror light fitting with high out put diffuser 2 feet long of 10 Watt 220 volt AC decorative type with driver holder and LED lamp with having energy efficient type complete including providing of suitable type flat flexible cable for electric connection from ceiling rose to fitting complete all as specified and directed .

S&F of angular/batten type shape lamp holder with PVC/ polycarbonate insulated body, alongwith brass adaptor and back plate for housing of bulb complete all as specified and directed .

S&F surface mounted LED bulk head luminaries light fitting of rated capacity 10W including LED lamp & driver suitable used for out door type with dust and water proof with energy efficient complete and including providing of suitable type of flat flexible two/three core cable and making electric connection complete all as specified and directed.

S&F of LED street light fitting of rated capacity 50 Watt 230 Volts AC with having LED driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection suitable for out door type made out of high pressure die cast hosing with heat resistant glass complete light fitting set including providing of suitable dia of GI bracket and it to as per match/setting the fitting fixture base hole attachment system and including providing of suitable type of flat flexible two/three core cable and making electric connection all as specified and directed.

S&F of ventilating exhaust fan made out of complete sturdy Engineering plastic body with having motor ,frame louvers & shutter and blade suitable for of size 200 mm sweep 1200 RPM 230 Volts including making of suitable type /size of hole on wall etc compete all as specified and directed.

S&F of sheet metal enclosure duly powder coated with double pole and neural enclosure with a two pin and earth plug and top and having mounting channel and complete with one 01 MCB SP 20 Amp and making all necessary electrical connection and dully fixed surface on wall or concealed on wall and making good the disturbed wall surface to match with existing surfaces all as required at site all as specified and directed.

S&F of sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrangement system suitable of size/type for vertical type distribution board vertical load line type of rating VTPN 4 way type 415 Volts 3 phase AC supply holding system with IP protection rating with ISI marked and having fitted neutral and earth link bus bar and mounting base channels and blanking plates suitable for holding of main MCCB as incomer and out going MCB complete system alongwith providing and mounting in side of DB box of 01 No of MCCB TP 100 Amps with breaking rupting capacity 25 KA and having adjustable setting & adjustable magentic type and also providing of 08 Nos of MCB SP 63 Amps 10KA 'C' curve type of the same manufacture make as per of distribution board make complete set and including duly fixed surface on wall or concealed in wall and making all necessary electrical and also refixing the all electric meter and making its wiring connection including taking down of existing meter and DBs complete all as specified and directed.

S&F of sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrangement system suitable of size/type of distribution board of rating SPN 12 way type 220 volt AC supply system with IP protection rating with ISI marked and having neutral and earth link bus bar and mounting base channel suitable for holding MCBs incomer and outgoing system complete set and including dully fixed surface on wall or concealed in wall and making all necessary electrical and also refixing the all electric meter and making its wiring connection including taking down of existing meter and DBs complete all as specified and directed by EIC.

S&F of MCB SPN 40 to 63 Amps, 230 Volts, 50 Hz AC supply suitable for 'C' series, 10 KA breaking capacity complete all as specified.

S&F MCB SP 6 to 32 Amps, 240 Volts, 50 Hz AC supply suitable for 'C' series, 10 KA breaking capacity complete all as specified.

S&F of sub main wiring system with two runs PVC insulated FRLS wire,1100 Volts grade with multistranded copper conductor wire of size 2 run of 10 Sqmm and 1 run of 10 Sqmm (Nominal area) (ISI Marked) any type any length drawn through in heavy duty ISI mark PVC Casing capping / PVC conduit of suitable size along with its all fittings and connected accessories and duly fixed concealed on wall or surface on wall including taking down old unserviceable sub main wiring system complete and making good all disturbed surfaces match to the existing surface complete all as specified and directed . Note: Two runs of 10 sqmm and one run of 10 sqmm cable and one run of casing capping shall be measured as one RM

Supply, laying and testing of LT cable XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor 1100 Volts grade cross section area of size 25 sqmm 3.5 core including laid in trenches or fixing on poles or passing through pipes complete including taking out of old unserviceable cable any type any size complete all as specified and directed.

M&L for sand cushioning for under ground cable provided with a layers of sand before laying cable and sand after laying and stretching the cable all as specified and directed by EIC.

M&L for brick covering width equal to length of brick for mechanical protection to cable with well burnt sub class 'B' bricks laid dry flat all as specified and directed by EIC.

Supply and laying GI pipe 40 mm bore medium grade with all fitting laid in trenches/ under road /floor/ pole/ wall for protection of cable including providing clamping arrangement for holding of pipe on pole/wall in proper size of clamps, nut bolt ,and washer etc complete all as specified and directed.

M&L for earthing, complete with galvanised steel earth plate electrode 60cmx60cm and 6mm thick buried directly in ground (Earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.5 mtr below normal ground level connecting to the galvanised iron earth lead wire of 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron and earth strip protected by provision of GI light grade pipe 20 mm bore including provision of concrete pit in PCC 1:2:4 type B-1 (using 20mm graded of stone aggregate) with XPM (weight not less than 4 Kg/Sqm) and frame of angle iron 25x25x6mmm with lugs 02 Nos and with 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate common salt and charcoal filling test point made out of 40mm/6mm flat iron with fixing arrangement funnel wire mesh and earth work in hard dense soil returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs all as per electrical plate No 03 of SSR-2009 Part-I and connecting to earth test point complete all as specified and directed.

M&L for taking down carefully of existing ceiling fan /exhaust fan and geyser any type any capacity and after removing fan blade and body parts including cleaning all dust particles and filling cavities with filler material, oiling, greasing including applying painting work on any type of fan with blade complete body system by two coat of synthetic enamel paint as per existing type of colour and after painting work assemble the same along with all connecting fixing accessories like rubber roll, nut ,bolt ,washer, lock pin, clamp etc and hanging and refixing the same position with the help of nut bolt and washer etc and washer etc and making all electrical wire connection complete all as specified and directed.

Supply , laying and testing of LT cable XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable ( heavy duty ) with aluminium conductor 1100 Voltas grade cross section area of size 35 sqmm 3.5 core including laid in trenches or fixing on poles or passing through pipes complete including taking out of old unserviceable cable any type any size complete all as specified and directed.

M/S Tajamul Ah Buchh (BID ID -3452215)

M/S MARVEL ELECTRICALS (BID ID -3456977)