SPECIAL REPAIR OF BUILDING NO P-59 AT SCE, SPECIAL REPAIR OF BUILDING NO P-62 AND P-63 CANDIDATE TOILET OF 14 SSB, SCE AND ADDITION/ALTERATION OF WINDOWS AND VENTILATORS INCLUDING ALUMINIUM GRILLS IN BUILDING NO P-368 MAIN OFFICE, 11 SSB AT SCE UNDER

Amount

Demolition of brickwork built in cement mortar including quoins, arches, pillar etc complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:4, complete all as specified and directed.

M&L for rendering 15mm thick on faces of brick work or concrete surfaces CM 1:6, and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick on faces of brick work or concrete surfaces CM 1:4, and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for 5mm thick renderinag in CM 1:3 in over concrete surfaces as in ceiling complete all as specified and directed.

M&L for complete removal of existing treatment of wall and applying two coats of oil bound distemper over one coat of primer complete all as specified and directed.

M&L for preparation of new surface of wall and applying two coats oil bound distemper over one coat of primer over 1mm thick birla white wall care putty complete all as specified and as directed..

M&L for complete removal of existing treatment of wall and applying two coats of white wash on wall complete all as specified and directed.

M&L for preparation of new platered surfac of ceiling and applying three coat of white wash complete all as specified and directed.

M&L for preparation of old platered surfac of ceiling and applying one coat of white wash complete all as specified and directed.

M&L preparation of new surfaces and appllyng two or more coats of 100% premium acrylic emulsion paint of approved colour on external wall surfaces, with silicon additive & Color stay Technology ,Excellent Dirt Pick up Resistance with low VOC less than 50 , Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water in 5:2 ratio applied over priming coat and 3mm thick wall care putty complete all as specified and directed.

M&L preparation of old surfaces and appllyng two or more coats of 100% premium acrylic emulsion paint of approved colour on external wall surfaces, with silicon additive & Color stay Technology ,Excellent Dirt Pick up Resistance with low VOC less than 50 , Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water in 5:2 ratio applied over priming coat and 3mm thick wall care putty complete all as specified and directed.

Taking down chowkat or frames not exc. 1.5 sqm each with shutters (without taking off shutters from frames) complete all as specified and directed.

Taking down chowkats with shutters exceeding 1.5 Sqm but n. exc 4 sqm each ( without takig off shutters from the frames) complete all as specified and directed.

S&F for Second class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed.

M&L for 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

M&L for 100mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinged pin, anodised and fixed, type C-21 complete all as specified and directed.

M&L 300mm aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts fixed complete all as specified and directed.

M&L Extruded aluminium alloy handles, fabricated type, anodised 150 mm size complete all as specified and directed.

S&F aluminium anodised barrel tower bolt extruded section 150 mm long complete all as specified.

M&L for powder coated aluminium doors (sliding/hanging type) with frame size 101.6 X 44.75 X 2.4mm thick and shutter aluminium anodised and Lock Rail 44.45X 47.62 X 2.02mm, style 44.45X 47.62 X 1.95 mm, Top Rail 101.60X 44.45 X 1.93mm, Intermediate rail 101.50X 44.45 X 2.01 mm and bottom rail 101.60X 44.50 X 2.5 mm incl necessary aluminium fittings like aluminium butt hinges 04 Nos, aluminum handles 150 mm 02 nos, Aluminium tower bolts 200mm 01 Nos, mortice lock 4 lever MS, hydraulic door closer of suitable capacity 01 No.,Aluminium door stopper 01 Nos, jointing cleats, glazing cleats, rubber packing, anodised aluminium snap beading, screws etc with panelling in two parts with 12 mm thick pre-laminated particle board in lower panel and 5mm thick tinted glass in upper panels incl all fittings & fixture complete all as specified and directed.

M&L for factory made uPVC white color sliding window three track made of extruded profiles with wall, thickness of profiles not less than 2.3mm with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm) interlock (One vertical length in each shutters 45.5mm x 28mm), glazing bead (24.5mm x 16mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware, EPDM gasket, 1.2mm +/- 0.2 mm thick galvanised steel frame (30mm x 18mm) of 2 Nos, sliding sash (30mm x18mm) sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners hardware touch lock of zinc alloyed (white powder coated) steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and required accessories and 5.0 mm thick coloured glass pans complete all as specified and directed.

M&L powder coated anodised aluminium grill wt n exc 5.60 Kg per sqm with all fittings & fixture and including stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperature 1.40mm and including aluminium frame around the grill complete all as specified & directed.

S&F for floor door stopper overall length of cover plate 150mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

M&L for preparation of new wooden surfaces and applying two coat synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new surfaces of steel and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

M&L for preparation of old surfaces of steel and applying one coat of synthetic enamel paint complete all as specified and directed.

S&F in stainless steel harrison rails/ curtain rod fancy type 25 mm dia including bracket, stops, rollers etc complete all as specified and directed complete all as specified and directed.

Dismantling of stone slab and tiles of any description or thickness laid bedded and pointed in any mortar in floor,wall, aprons etc complete all as specified and directed.

M&L Non-skid ceramic coloured tiles 7 to 8 mm thick ( square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured of tiles including laying of screed bed or bedding layer of mortar 15mm thick in cm 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surface 600x300 x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match coloured tiles including rendering 10 mm thick on faces of brick or concrete surfaces in cm 1:3 complete all as specified and directed.

M&L for coloured vetrified tiles 7 to 8 mm thick ( square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured of tiles including laying of screed bed or bedding layer of mortar 15mm thick in cm 1:6 complete all as specified and directed.

M&L for 20mm thick granite stone (any type of work) in steps, jambs, pillars, cooking platform and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L in Machine cut Plolished kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over 15mm thick screed bed in CM(1:6) complete all as specified and directed.

M&L in Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with over 10mm thick screed bed in CM(1:3) complete

M&L for chamfers, splays or arris of granite in face work exc. 15mm but n. exc 50 mm wide complete all as specified and as directed.

Taiking up or down steel tubing and connections, 15 mm bore complete all as specified and directed.

Taking up or down steel tubing and connections, 20 mm bore complete all as specified and directed.

Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubings, cutting not exceeding 10cm girth complete all as specified and directed.

M&L for GI tubing 15 mm bore 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

M&L for GI tubing 20 mm bore 'medium grade' galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Taking down rain water / vent pipe of any description including fittings etc. including removal to store, complete all specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall or laid in floors complete all as specified and directed.

S&F PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints fixed to wall or laid in floors complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends, of any radius provided without access door complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends, of any radius provided without access door complete all as specified and directed.

S&F 75mm bore stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including securing ends of stays to wall or roof complete all as specified and directed.

S&F 100mm bore stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including securing ends of stays to wall or roof complete all as specified and directed.

S&F 75mm dia outlet PVC (SWR) floor trap, plain with granting including jointing with solvent cement complete all specified and directed.

S&F in repair kitchen sinks without drainage board bowl size 410mm x330mm x116mm, made of stainless steel 1 mm thick with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to waste pipe and coupling complete all as specified and directed.

S&F in repairs cast copper alloy chromium plated fancy type angle cock, of 15 mm bore complete all as specified and directed.

S&F in repairs gun-metal gate valve 20 mm bore, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete.

S&F in repairs fancy type, chromium plated bib taps, cast copper alloy screwed down, screwed for iron pipe or for brass ferrule 15 mm bore complete all as specified & directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Dismantling water tanks capacity exc 500 but n. exc 1000 Ltrs complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks white colour tripple layers with thread type locking cover arrangement, 1000 ltrs (cylindrical vertical with closed top ) hoisted and fixed in position complete all as specified and directed.

S&F Ball valves high pressure, with polythene float and fly nut complete, screwed for iron pipe 20 mm bore or brass ferrule and fixed complete all as specified and directed.

M&L Framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks, cooler stand and other similar work complete all as specified and directed.

Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in OHT platform, haunching for manhole, over Chajja, cills and other similar work complete all as specified and directed.

Demolition of reinforced cement concrete in roofs, beams, staircase, lintels, chajja, RCC OHT etc complete all as specified and directed.

M&L reinforced cement concrete (nominal mix) type B1 1:2:4 (20 mm graded aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, copies, deck slabs and in shelves complete all as specified and directed.

Use and waste of form work (flat) to rough finished surfacesides and soffits of floor and roof beams, cantilevers, shelves etc complete all specified and directed.

S&F for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete, all specified and directed.

Cutting holes in brick wall (exc half brick and n exc one brick )in cement mortar or cement lime mortar and stone wall built in lime mortar for holdfasts or inserting rungs for staging or roofs complete all as specified and directed.

S&F for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F PTMT grating doom square 150mm size (minimum wt 100 gms) complete all as specified and directed.

Dismantling wall and ceililing boards (fibre, pulp, insulation etc. ) or insulation boards/ slabs/ blankets, any thickness, including cover fiilets complete all as specified and directed.

S&F Anodised aluminium snap grid frame work for false ceiling all as as specified (Size of grid 605 x 605mm) complete all as specified and directed.

M&L Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed.

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

S&F repairs Vitreous china Urinal bowl, Half stall type, white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securign urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement (excluding flushing cistern, flush pipe) and waste pipe with discharge arrangement complete all as specified and directed.

S&F urinal spreader of PTMT of any colour for fixing with 15mmdia pipe complete all as specified and directed.

S&F in repairs cast copper alloy chromium plated fancy type stop cock cocealed type, of 15 mm bore complete all as specified and directed.

Dismantling of brick tiles any thickness laid, bedded and pointed in any mortar from roof including removal of old tarfelt (cost of necessary scafolding and removal of the material obtained from site to outside the premises deemed to be included in the rate) complete all as specified and directed.

Roughening surfaces of old concrete roof by iron brush and picking, sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3.0 Kg of cement per Sqm complete all as specified and directed.

M&L for 15mm thick rendering on roof surface of mortar in CM 1:4, using Liquid Water Proofing Compound as per manufacturer's instruction, laid in roof (WPC shall be paid separately) complete all as specified and directed.

M&L for priming roof surfaces and applying a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg/sqm except felt and laying APP based polymeric membrane with 100mm side laps/end laps and minimum weighing 3 Kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150gms/sqm) over roof surfaces by force application complete all as specified and directed.

M&L 40mm thick brick tiles laid on cement mortar 1:6 and grouted flush in CM (1:3), mixed with 5% of crude oil by weight og cement on 15mm thick screed bed complete all as specified and directed.

Description same all as per Item No 80 here in above but except tile complite all as specified and directed.

M&L for PCC 1:2:4 type B0 using 12.5mm graded stone aggregate as in roof kerbs etc rounded or chamfered on edges complete all as specified and directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

M&L for Pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping scews complete all as specified and directed.

M&L Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. Fe-410-W (Grade E-250) Quality-A including of dismantling of old wrought iron and carried over to schedule of credit complete all as specified and directed.

M&L for half brick work with sub class 'B' bricks (old size) straight or curved on any radius built in CM 1:4 complete all as specified and directed.

Dismantling of floor hearth or wall tling including cement mortar bedding (but not backing), removing servicesable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 25 mm thick plain cement concrete type B-0 1:2:4 (12.5mm graded aggregate) as in levelling course of floor and other similar works complete all as specified and directed.

M & L for non skid coloured ceramic floor tiles 10 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm,in floor ,wall etc set for joint free non skid tiles & jointed in neat cement slurry and pointed in white or coloured cement to match the surface with 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

M&L for glazed ceramic coloured wall tiles in vertical surface 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in 1:4 CM complete all as specified and directed.

Demolition of cement concrete including floor tiles or stone in any description and any position etc removal from site and complete all as specified and directed

M&L for 75 mm thick cement concrete 1:3:6 type B-2 using 40 mm graded crushed stone aggregate BT stone aggregate in plinth protection finished even and fair including necessary form work and cutting of joints using extra cement etc complete all as specified and directed.

M&L for plain cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in surface channel or surface drain including forming and finishing with extra cement including taking down existing concrete complete all as specified and directed.

M&L for 10mm thick plaster in CM 1:3, mixed with liquid water proofing compound over concrete surface of roof when concrete is green complete all as specified and directed. (Note : WPC to be mesured and paid separately under paaropriate item)

Cleaning the dust,durt and any other foreign material from roof surface and applying a coat of bituminous primer @ 0.40 ltr / Sqm uniformily and primer shall be allowed to dry over night as conforming to IS 3384-1986 complete all as specified and directed.

M&L for Laying of 3mm thick APP membrane of (reinforced with non-woven fabric polyester type) (weight not less than 3 kg per sqm) shall be done using butane torch maintaining 100mm side overlap and 150mm end overlap,sealing all overlaps and bonded to the surface by fusing and bonding torchon method complete all as specified and directed. (Note: All water proofing work shall be done as per manufacturer instruction and under supervision of manufacturer technical representative.)

Supply only Liquid water proofing compound (ISI marked) complete all as spesified and directed.

M&L for Applying two coats of bitumen based aluminium painting @ 0.15 Kg / sqm on water proofing treatment with preparation of surface as on non assesible area complete all as specified and directed.

S&F in repair rotational moulded,multilayer HDPE water storage tank of 1000 ltrs capacity(Cylindrical vertical with closed top) ISI marked fixed in position on existing places with fittings and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed.

S&F in repair ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 20mm bore minimum weight 210 gms complete all as specified and directed.

S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and lime concrete bedding complete all as specified in SSR and including 'P' or 'S' trap complete all as specified and directed.

S&F in repair ovel type vitreous china wash and basin, white, flat back, size 550 mm x 400 mm fixed on existing granite stone, fixing of tap, waste fitting,pipe and union complete all as specified and directed.

S&F in repair PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and including ball valve float & handle, waste pipe & brackets complete set all as specified and directed.

S&F in repair PVC connection 450 mm long, 15 mm size with brass chromium plated nuts complete all as specified and directed.

Refixing old 15 mm bore GI steel tubing and connections in new or old position (Walls, ceiling, floors, etc) complete all as specified and as directed

Refixing old 20 mm bore GI steel tubing and connections in new or old position (Walls, ceiling, floors, etc) complete all as specified and as directed

S&F in 15 mm bore CP central hole basin mixer (swan neck/head type) with regular spout fancy type, cast copper alloy with capstan heads,long screwed shanks and fly nuts screwed for iron pipe fixed complete all as specified and directed.

S&F in repairs 600 mm long tubular towel rail , brass chromium plated of 20 mm dia complete all as specified and directed.

S&F in repairs Stainless steel grating dome 100 mm dia with or without waste holes as required complete all as specified.

S&F in repairs 110 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls or floor or in trench complete all as specified and directed.

S&F in repairs 75 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls or floor or in trences complete all as specified and directed.

S&F in repairs PVC (SWR) floor trap plain or multi with stainless steel grating incl joinig to waste pipe with solvent cement joint dia of outlet 75 mm bore complete all as specified and directed.

S&F factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F for 100 mm long stainless steel butt hinges with steel pin complete all as specified and directed.

S&F for 200mm long anodised aluminium barrel tower bolt of extruded section complete all as specified and directed.

M&L for complete removal of preparation of old decorated surface of wall and Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) external paint over a coat of putty complete all as specified and directed.

M&L for providing PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in benching, coping, kerb and like including necessary formwork and weathering , slightly rounded or chamfered as required and as directed.

M&L for PCC type E2 1:5:10 using 40mm graded crushed stone aggregate as in sub base complete all as specified and directed

M&L for 100mm thick cement concrete 1:2:4 type B-2 using 40mm graded crushed stone aggregate as in flooring complete all as specified and directed.

M&L for rubber moulded chequered cement concrete coloured tile 30cm X 30cm X 25 mm thick with grey cement and pigment set jointed and pointed in neat cement siurry over screed bed or bedding layer 15 mm thick in CM (1:6) in floor all as specified including dismantling of tiles

M&L preparation of new plastered surfaces of all and applying two coats of exterior emulsion weather coat over a coat of primer and one coat of wall care putty in of external wall surfaces complete all as specified and directed.

Taking down carefully aluminium / copper point wiring any type for one light , fan, socket power point or buzzer controlled by one switch complete including fitting / fixtures such as switches, ceiling roses, holder, socket, light fitting etc; for credit and making good disturbed surfaces of walls, ceilings etc complete all as specified and directed.

M&L for point wiring with concealed in wall 2.5 sqmm (nominal area) FRLSH PVC insulated stranded copper conductor single core including non metalic PVC conduit medium grade of appropriate size concealed in wall and modular sunken box, cover plate/frame any module as required at site with all accessories as specified including 2.5 Sqmm FRLSH PVC insulated unsheathed multistranded copper earth conductor to common earth and connected to earth dolly for fan / light / exjaust fan/ bell point controlled by one switch and single conduit shall be used for each circuit. Note:- 1. Cost of PVC conduit, with connected item to be included in the quoted rate. 2. M&L for cutting chases on walls / ceiling and making good disturbed surfaces including finishing with cement mortar (1:3) etc; are deemed to be included in the quoted rate. 3. Modular metal box, cover plate & frame for any module to be included in the quoted rate.

All as per item No. 126 here-in- above but for 3 pin 5 Amps switch socket on independent board with 2.5 sq mm copper cable complete all as specified and directed.

All as per item No. 126 here-in- above but for 3 pin 15 Amps switch socket n on independent board with 4 sq mm copper cable including 4 Sqmm FR PVC insulated unsheathed multistranded copper earth conductor to common earth complete all as specified and directed.

All as per item No. 126 here - in - above but for 5 Amps socket point on the same board controlled by one switch complete all as specified and directed.

All as per item No. 126 here - in - above but for one light point controlled by two, two way switch with 1.5 sq mm copper conductor cable complete all as specified and directed.

S&F modular switch 1 way, 6 amps, 230V AC, one way complete all as specified & directed.

S&F modular socket out let 2-in-1, 3 pin, 6 amp flush type 2 module complete all as specified & directed.

S&F modular switch flush type 16 amps, 230V AC single pole one way complete all as specified & directed.

S&F modular socket out let 2-in-1, 3 pin, 5 & 16 amp flush type 2 module complete all as specified & directed.

S&F modular switch 2 way, 6 amps, 230V AC, one way complete all as specified & directed.

S&F for ceiling rose surface backelite three terminals complete all as specified and directed.

S&F modular fan regulator, 5 stepped, electronic type, single phase, 120 watt, socket size incl connection complete complete all as specified & directed.

Supply and fixing in replacement of Decorative ultra slim square profile LED lighting fixture 20W, 120 lumen per watt (inverter type ) 4' long batten with extruded polycarbonate, environmental friendly, energy efficient ready to use pack with all assoceries intenallt prewired & includingconeecting up with 2 core flexible cppper conductor cable with sutable size & suitable for and mounting clamps complete all as specified and directed.

Supply & fixing energy efficient LED light of 10 Watt of length - 02 Feet (inverter type ) long having minimum 1150 Lumen output, wide voltage protection range 140-270 Volt AC housed in extruded aluminum housing (enhances safety) with high quality polycarbonate diffuser including making connection with two core PVC insulated, sheathed copper conductor cable of size 23/0.0076 complete all as specified and directed.

Supply & fixing wall mounted fitting 12 watt LED bulb including making connection with two core PVC insulated, sheathed copper conductor cable of size 23/0.0076 complete all as specified and directed.

Supply and fixing and replacement of LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC surface/recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

S&F on wall building security light luminaire for 1x35 w LED with deep drawn housing complete with and including cable for connection from ceiling rose with 3 core 1.5 Sqmm PVC insulated stranded copper conductor including bracket made out of 32 mm bore GI Light grade 1.20 M long to required shape as in bracket for to shape fixed on wall/pole with two pair of MS flate iron clamp of size 50mm X 6 mm thickness of required shape with nuts, bolts and washers including painting complete and taking down unserviceable one all as specified and directed.all as specified.

Taking down carefully ceiling fan any sweep and any make after disconnecting the electrical connection, dismantling the blades and removing fan incl blades and repair, servicing, paiting if required and after repair to fix same place complete all as specified and as directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 380m sweep with, blades, and frame and louvers including antidust painting complete including cutting holes on wall, making good and finishing of disturbed surfaces matching with the exisitng surfaces, necessary fixing arrangements such as fastener bolts, nuts, washers etc; of appropriate size all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers including antidust painting complete including cutting holes on wall, making good and finishing of disturbed surfaces matching with the exisitng surfaces, necessary fixing arrangements such as fastener bolts, nuts, washers etc; of appropriate size complete all as specified and directed.

Supply and fixing in replacement of factory made epoxy polyester powder coated distribution board TP & N 4 way (vertical load line distribution board) with metal double door (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with provn for 4 pole MCCB 160Amp 25 KA - 01 fixed type Nos and SP MCB 63 Amps 'C' curve 10 KA - 12 Nos outgoings complete all as specified and conforming to IS: 8623 along with cable end box for above DB all as specified. NOTE :-(a) MCB and MCCB cost shall be included under respetive item of sch. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.

M&L for single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps 240 volt capacity complete all as directed.( for AC)

S&F in replacment of factory made, sheet metal enclosure distribution boards, double door type, protection class (IP-42), suitable for mounting MCBs confirming to IS-13032, IS-8623, BS-5484 with min 200 Amps rating copper bus bar ,SP&N 8 ways, 220 volts Note : MCB/ shall be measured and paid seperatly under respective item of this schedule

Supply and fixing in replacment of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning.

Supply and fixing in replacment of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 40/63 AMP, in the MCB DB Complete with connection testing and commissioning.

M&L in replacment of two single core (submain) FRLS PVC insulated cable of 6.00 Sqmm nominal dia and one single core green PVC insulated copper conductor earth continuity cable of 6.00 sqmm nomianal dia as mentioned below is drawn in and including non metallic, medium duty, rigid PVC conduit not less than 20 /25mm dia concealed in wall including all conduit and fixing accessories including cutting chases & making good to disturbed surfaces with cement mortar ratio of 1:4 and colour wash complete all as directed. Note :- (I) The cost for cutting, chases required and suitable lugs shall deemed to be included in the quoted unit rate. (II) Two run of submain wire, one run of earth wire and one run of PVC conduit shall be measured one RM

M&L in replacment of two single core (submain) FRLS PVC insulated cable of 4.00 Sqmm nominal dia and one single core green PVC insulated copper conductor earth continuity cable of 4.00 sqmm nomianal dia as mentioned below is drawn in and including non metallic, medium duty, rigid PVC conduit not less than 20 /25mm dia concealed in wall including all conduit and fixing accessories including cutting chases & making good to disturbed surfaces with cement mortar ratio of 1:4 and colour wash complete all as directed. Note :- (I) The cost for cutting, chases required and suitable lugs shall deemed to be included in the quoted unit rate. (II) Two run of submain wire, one run of earth wire and one run of PVC conduit shall be measured one RM

M&L for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron wire 4mm dia as earth lead wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No. 3, MES SSR Part I- 2009 with 15 mm dia medium grade GI pipe as a protection to earthing lead and 20 mm dia medium grade GI pipe for watering purpose including excavation & earth work in any type of soil, funnel, wire mesh, RCC pit with cover, cast iron frame complete and connected to earthing test point all as specified or indicated including testing on completion. Notes (i) The concrete pit shall be PCC (1:3:6) type C-1, 40mm thick precast cover slab of RCC with suitable Mild steel handle in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I (ii) PCC pit shall be provide at least 500 mm away from the earth pit and not on just on the eath pit and extra cost of additional length of water pipes and fittings junction etc shall be deemed to be included in the rate. (iii) Item includes the cost of 7.5 metre earth lead wire and GI pipe for protection of earth wire. Any varriation in quantity shall be adjusted.

Supply, laying, jointing and testing LT cable in trenches or on poles / walls, XLPE Insulated screened, PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 sq mm, 3.5 core complete all as specified and directed. Note: 1. Excavation and earth work will be measured and paid seperately.

Excavation in trenches, in any type of soil not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr in depth , laying of cable or pipes (where provided for protection of cable) etc and getting out trimming the sides, forming bottom surfaces to required level complete all as specified and all as directed.

M&L for 40 mm dia GI tubing light grade with all necessary fittings laid in trenches, fixed to walls/ poles/ under road/ floor etc for cable protection, complete all as specified and directed.

M&L for sand cushioning with a layer of sand 80 mm thick before laying of cable and 150 mm thick after laying of cable in trenches complete all as specified and directed.

Supply and laying of well burnt bricks, sub class 'B' laid flat in trenches for protection of cable complete all as specified and directed.

Returning and filling including spreading, levelling, watering and well ramming in layers not exceeding 25 Cm thick all as specified and directed by Engr-in-Charge.

Removing of surplus soil to a distance not exceeding 50 Mtrs and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified.

Taking down carefully energy meter after disconnecting the electrical connection, refixing or replacement the energy meter in same position including all electrical connection and material and labour all as specified and as directed.

M&L for point wiring with concealed in wall 2.5 sqmm (nominal area) FRLSH PVC insulated stranded copper conductor single core including non metalic PVC conduit medium grade of appropriate size concealed in wall and modular sunken box, cover plate/frame any module as required at site with all accessories as specified including 2.5 Sqmm FRLSH PVC insulated unsheathed multistranded copper earth conductor to common earth and connected to earth dolly for fan / light / exjaust fan/ bell point controlled by one switch and single conduit shall be used for each circuit. Note:- 1. Cost of PVC conduit, with connected item to be included in the quoted rate. 2. M&L for cutting chases on walls / ceiling and making good disturbed surfaces including finishing with cement mortar (1:3) etc; are deemed to be included in the quoted rate. 3. Modular metal box, cover plate & frame for any module to be included in the quoted rate.

All as per item No. 162 here-in- above but for 5 Amps socket point on the same board controlled by one switch complete all as specified and directed.

Supply and fixing Switch Piano flush type single pole one way 6 Amps complete all as specified and directed.

Supply and fixing socket outlet 5 pin 6 Amps flush type complete all as specified and directed.

S&F in replacment of factory made, sheet metal enclosure distribution boards, double door type, protection class ( IP-42), suitable for mounting MCBs confirming to IS-13032, IS-8623, BS-5484 with min 200 Amps rating copper bus bar, SP&N 8 ways, 220 volts complete all as specified and directed. Note: MCB/ shall be measured and paid seperatly under respective item of this schedule

Supply and fixing in replacment of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 32 Amps in the MCB DB complete with connection testing and commissioning.

Supply, laying, jointing and testing LT cable in trenches or on poles / walls, XLPE Insulated screened, PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 Sqmm, 2 core complete all as specified and directed. Note: 1. Excavation and earth work will be measured and paid seperately.

Schedule of Credit (MINUS) Rs. 63,902.00 B/F from Serial Page No. ____ [Note : Details of items for schedule of credit is given on Srl Page No. ___] This amount shall be automatically deducted to arrive at tendered sum

Praveen Kumar Jaiswal (BID ID -3485022)

Raghvendra Enterprises (BID ID -3489989)

Siddhi Constructionn (BID ID -3483523)