CERTAIN REPAIR AND REPLACEMENT TO ROLLING SHUTTER, ROOF SHEET FLOORING, PLASTERING AND OTHERS MISC B/R WORKS UNDER AGE B/R-I OF GE (SOUTH) PATIALA

Amount

Dismantling asbestos cement (corrugated, semi-corrugated, etc.,) sheets in roof coverings complete all as specified and as directed.

Dismantling timber scantling in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section, unframed work in any position complete all as specified and directed.

Dismantling/ Taking down framed wooden trusses exceeding 4.00m span bu not exceeding 8.00 m span and removimg from site complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

Dismantling of Brick work including all quains and arches pillars etc built in cement mortar complete all as specified and directed.

M&L for brick work in cement mortar (1:6) using sub class 'B' bricks staight or curved on plan exc 6.0 m mean raidus complete all as specified and directed

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

M & L 15mm thick cement plastering in cement mortar 1:4 brick or concrete surfaces of wall finished fair and even without using extra cement,complete all as specified and directed.

M & L 10mm thick cement plastering in cement mortar 1:6 finishing even and smooth without using extra cement complete all as specified and directed.

Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

Pre-painted galvalumealuminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

Preparing new steel surfaces and applying two coats of synthetic enamal paint over one coat of red oxide primer complete all as specified and directed.

M & L for preparation of new plastered surface or unplastered surfaces of walls and applying two coats of cement based paint over one coat of alkali resistant cement priming paint all as specified and directed by Engr-in-Charge.

M & L for preparation of new plastered or unplastered surfaces of walls and applying two coat of Oil Bound Distemper over a coat of Chalk whitening / wall care putty with smooth surface complete all as specifie and directed

Taking down chokhats or frames (without taking off shutters from the frame) exc 1.5 sqm and n.exc 4.00 sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified.

Taking down chowkhats or frames with shutters of any description (without taking off shutters from the frame) n exc 1.5 sqm each and removing from site and complete all as specified and directed.

Factory made steel window box type using ERW hollow 'P' section comprising double frame for and including gauged and glazed Skeleton shutter jointed internally with flat iron 40x4mm complete including grill of 8mm square bars, fixed horizontally @ 10cm c/c, hinges, handle, tower bolts, stops, lugs etc. all as shown on drawing No. TD-219(c) sheet 1/3 to 3/3 complete. Make: Manufactured by M/S TEE PEE Enterprises, Amritsar (Pb) / PD Industries Panchkula(HR)/ M/S Laxmi Welding Works, Ambala Cantt/ M/S Ram Fabricators Pvt Ltd, Panchkula or equivalent as approved by GE Note: (i) For the purpose of measurement & payment double shutter with frame shall be considered as one unit. (ii) Unit rate quoted against this item shall also include the iron mongery and grill as shown on drgs. (iii) Glazing, wire mesh & painting shall be measured & paid for separately.

Framed work Fe-410- W(Gde- E-250) quality- B as in chowkats of doors or gates of angle or other section with gusset plates, rails, braces, hold fasts etc complete all as specified and as directed

S & F 35mm thick plain framed (Factory made) pannelled shutters (two panel) of 2nd class HW with lock rail and panels of 9mm BWP commercial ply or 12mm thick vereered particle board with commercial veneering on both faces. The size of rail and stile as per IS 1003(Part-I) complete all as specified and direced.

S & F 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size complete all as specified and directed.

Mild steel barrel tower bolts 200 mm long , stove enamelled black, with bright bolt and fixed complete all as specified and directed

Mild steel pressed handles oval type stove enamalled black 125mm size complete all as specified and directed.

Mild steel sliding door bolts, 250mm long plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed

MS butt hinges 100mm long cold rolled MS medium weight complete all as specified and as directed.

S & F M/S 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed

Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

Preparing new wooden surfaces and applying two coats of synthetic enamal paint over one coat of pink wood primer complete all as specified and directed.

Roughening of concrete surfaces by picking, sweaping clean with water and removing all loose dirt etc. complete all as specified and directed.

M & L 50 mm thick Cement cincrete 1:3:6 type C-2 using 20mm graded crushed stone agg as in plinth protection finishing surface w/o using extra cement complete all as specified and directed.

Purpose made holding down boilts 12 mm dia with nuts and washers complete all as specified and directed.

Anodised aluminium snap grid frame work for false ceiling all as specified incl Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

PVC insulation panels with EPS stuck to 10mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and drawing.

S & F Machine cut Kota stone slab flooring 20mm (+ 2mm) thick laid over and including 20 mm thick screed bed or bedding layer in cement mortar 1:4 as base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

S&F in replacement of safety lever locks, mild steel with 4 levers for rolling shutters of standard quality as approved by GE complete all as directed by Engineer-in-Charge

Replacement of unserviceable spring of rolling shutter with new helical wire spring or flat spiral spring of 8 SWG wire and length not less than 40cm and up to 60cm or as per existing one at site ,applying twc coats of dynthetic enamel paint to match with existing surface complete including taking down existng one all as specified and directed.

Supply and fixing gear box with handle duly painted with standard accessories including vertical rod of any dia and size same as existing at site including taking down existing one and making shutter functional all as directed .

Replacement of existing unserviceable steel pipe shaft of 50mm dia, MS pipe medium grade including welding, drilling for securing springs with bolts, nuts etc complete all as specified and directed.

Opening out existing gear box and moving mechanism for setting right the gear box wheels, vertical rod welding (where required), replacement of worn out nuts, bolts bushes, complete oiling and greasing, set in smooth working condition and refixing the same including making good the disturbed portion of structure to match with existing one all as directed and specified.

S&F Ball bearing for rolling shutters in repair any size suitable to exesting MS pipe complete all as specified and directed.

Taking down gear operated rolling shutter of any size and of any thickness of lath including steel cover, springs, ball bearings ,shafts, gear box and guide channel etc and re-fixing the same after repair, greasing the guide channel and gear box to make smooth functioning of the shutter including making good the disturbed portion of structure to match with the existing one and painting all as specified and directed (Replacement of part shall be measured and paid for separately)

Taking down without gear operated rolling shutter of any size and of any thickness of lath including steel cover, springs, ball bearings ,shafts, gear box and guide channel etc and re-fixing the same after repair, greasing the guide channel and gear box to make smooth functioning of the shutter including making good the disturbed portion of structure to match with the existing one and painting all as specified and directed (Replacement of part shall be measured and paid for separately)

Taking down old damaged / rusted lath and Fixing new lath (thickness of sheet/ laths 1.25 mm and curtain inter locking curl 75 to 85 width of each trip of each strip) and & bottom rail for rolling shutter made to shape and size as per existing one , FI strip,hold fasts comlete including riveting or welding as required and errecting with existing accessories like guide channel ,gear operated type including gear box, ball earings with chain wheel and hand chain incl top cover anchoring rod, hash and staple and one shop coat of primer erected in position to make shutter functional making good the disturbed surfaces of walls/pillars in cement and sand mortar 1:4 and PCC 1:2:4 type B-1 for hold fasts etc, complete all as specified. (Size of new lath & bottom rail to be measured only) Note:- Replacement of other parts shall be measure & paid separately.

Taking down old damaged / rusted lath and Fixing new lath (thickness of sheet/ laths 1 mm and curtain inter locking curl 75 to 85 width of each trip of each strip) and & bottom rail for rolling shutter made to shape and size as per existing one , FI strip,hold fasts comlete including riveting or welding as required and errecting with existing accessories like guide channel ,gear operated type including gear box, ball earings with chain wheel and hand chain incl top cover anchoring rod, hash and staple and one shop coat of primer erected in position to make shutter functional making good the disturbed surfaces of walls/pillars in cement and sand mortar 1:4 and PCC 1:2:4 type B-1 for hold fasts etc, complete all as specified. (Size of new lath & bottom rail to be measured only) Note:- Replacement of other parts shall be measure & paid separately.

FAVOURITE ENGINEERS

M/S RAJ KUMAR GUPTA

M/s Anil Kumar and co.