Provn of certain B/R and E/M Minor works at Tibri Mil Stn under GE Gurdaspur.

Amount

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete.all as sppecified and directed.

M&L for coloured glazed ceramic tiles 300x 250 x 7/450 x 350 x 7mm mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick redering in CM 1:4 on wall complete all as specified and directed.

M&L for jointless virified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6.complete all as specified and directed.

All as per item No 04 above but in skirting including 10mm thick backing coat in CM 1:4 on wall complete all as specified and directed.

S&F of exposed frame false ceiling system with GI powder coated grid consisting of interlocking arrangement of main T runner of 15mm size, suspended at 1200mm C/C and cross T runner of 15mm size suspended at 600mm C/C supported by 1.5mm dia GI wire from roof/Slab/truss incl wall/perimeter runner/channel of 15 mm size with and incl 4mm thick pre-painted non asbestos fiber reinforced cement board (E-board), designer type of size 595x595mm, duly fixed in ceiling frame work, complete all as specified and directed.

Demolition of sunken slab floor of WC and Bath including WC trap etc incl taking down loose filling of aggregate in any type and removing where direted and providing water proofing treatment of sunken slab as follows:- (a) 15mm thick rendering on vertical sides of RCC slab in CM 1:3 mixed with chemical " PIDIPROFF LW of Dr Pidilite or equivalent " as per manufacturer instructions. (b) Cleaning the concrete surface by brushing and watering and remove all surface inperfections. (c) Fixing 40mm dia Pipe 450mm long at bottom of the sunken floor and wraping of bath seal tape on the pipes inserted through walls to floor area and seal it (Bath seal tape product of Dr fixit or equivalent and grouting around the inserted pipes by pouring Dr fixit bath seal or equivalent grout as directed (d) Make angle fillets by mixing sand cement and Dr fixit pidicrete URP or equivalenont all corners. (e) Brushing neat cement slurry two coats with high performance cementitious polymer water proofing coating of Dr fixit bath seal WPC or equivalent of thickness 1mm in combination of WPC and cement (1:1.5) by vol and giving upto height 15cm from bottom slab and allow it dry completely. (f) Providing PCC 1:4:8 type D-2 using 40mm graded stone aggregate mixed with WPC as per mnufacturer instructions in sunken slab over brick bat . (g) Fill the sanitary gaps with sealing compounds complete.

Taking down chowkats with shutter n.exc 1.50 Sqm each (without taking off shutter for the chowkats and removing to store complete all as specified as directed.

All as per Srl item No 08 above but exc 1.50sqm but n.exc 4.00 Sqm

M&L for powder coated aluminium frame for doors, windows, ventilators with one or more rebates, fabricated out of powder coated aluminium hallow square or rectangular section of required size incl necessary joining cleats, fixing screws etc complete, having size of frame for doors 100mm x45mm x 3.18 mm thick; for window 104mm x 45mm x 3mm thick; for ventilators 59mm x 33mm x 2.5mm complete all as specified and directed.

M&L for powder coated aluminium door shutters, aluminium section for top rail and styles 85mm x 45mm x 2.0mm thick; bottom rail 100mm x 45mm x 2mm thick and lock rail 100mm x 45mmx 2.0mm thick incl necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, powder coated aluminum hinges, powder coated aluminum snap beading, screws, etc, Rate of 5.5mm thick glass, stainless steel wire gauge and all fittings included complete all as specified and directed.

S&F powder coated aluminium window shutter Sliding type with frame of powder coated aluminium channel section suitable for sliding aluminium shutters weighing 0.55Kg/M of three channel including necessary joining cleats glazing clips rubber packing Powder coated aluminium shop beading screws with two shutter Including 5mm thick coloured glass and one shutter with stainless steel wire gauze including necessary locking arrangement and handle etc;rates of glass and wire gauze all fitting included as specified etc complete all as specified and directed.

S&F powder coated aluminium ventilator Luver type with frame , aluminium section weighting 0.55 Kg/M including necessary joining cleats, glazing clips, rubber packing, side handles fixed to wall with fastener, etc rates of glass and all fittings included completed all as specified and directed

Supply and fix powder coated aluminium grill, 3 to 5 mm thick made in diamond shape mesh of size 65 x 65 mm complete as specified and directed.

S&F of aluminium alloy anodized sliding door bolt 200mm length with hasp staple and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all specified and directed. (Make : Ashish, Classic)

S&F of 150mm aluminum handle cast type anodized complete all specified and directed. (Make : Ashish, Classic)

M&L for stainless steel curtain rod 25mm dia steel pipe cutting into length as required at site with and incl SS end caps/lobs and SS wall mounting brackets, complete all as specified and directed.

S&F aluminium body door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and as directed.

Taking up and down GI pipe15mm bore including fittings, connection, including cleaning for reuse or removal to store as specified.

All as per Srl item No 19 above but 20mm bore of pipe

S&F of galvanised steel water tubing , 15mm bore, medium grade, fixed to walls under floors and on ceiling surface or in chased including providing all pipe fittings complete all as specified and directed.

S&F of galvanised steel water tubing , 20mm bore, medium grade, fixed to walls under floors and on ceiling surface or in chased including providing all pipe fittings complete all as specified and directed.

Supply & fix in repairs Vitreous China wash down water closet pan (single unit), EWC, floor mounted, white or off white coloured including flushing cistern system & matching coloured seat covered fixed, complete all as approved by Engr-in-charge and directed. Make: Kohler (Ist quality), Cera (Ist Quality), Parry ware (super fine).

S&F CP brass Health faucet (hand shower) including flexible pipe of required length fixing to 15m dia pipe with brass check nut complete all as specifed and directed.

S&F in repair Vitreous China table top wash basin, white or off white, flat back, including single lever extended body basin mixer pillar tap, waste chain, plug, porcelain stopper, CP waste copling and CP bottle trap complete all as approved by Engr-in-charge and directed. Make: Make: Kohler (Ist quality), Cera (Ist Quality), Parry ware (super fine),

M & L for Decorative laminated type 1 of thickness 1.5 mm surface finish(Sinmaika), colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions on existing cupboard shutters including 18 mm thick plywood grade BWR, Type BB complete all as specified and as directed.

S&F of 100mm size medium weight mild steel butt hinges fixed with medal surface through bolt or screw or welding complete all as specified and directed.

S & F 150 mm Hasp and staple, safety type,brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified & directed.

S&F in replacement of toilet roll holder with flap made of cast copper alloy, chromium plated, complete all as directed.

S&F in replacement of towel rail 600 mm long and wall bracket made of cast copper alloy, chromium plated, complete all as directed.

S&F tubular towel rail 20mm dia 600 mm long brass CP including brackets fixed in repair complete all as directed.

S&F in repair brass CP Centre hole Basin mixture 15 mm bore complete all as specified and directed.

S&F in repair PVC waste pipe 32mm bore fixed to WHB as per existing length complete all as specified and directed.

S&F in repair brass CP wall mixer with telephonic shower arrangement and telephonic shower suitable for 15mm dia bore pipe.

S&F in repairs bib tap, 15mm dia, CP, short body, screwed, high pressure for iron pipe complete all as specified and directed.

S&F 15mm bore bib taps, fancy type cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule. Make :- Cera (Ist quality), Parry ware (super fine, Hindware (Ist quality).

S&F in repair PVC connection, 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F PVC connection 15mm bore with PTMT nuts and 450mm long.

S&F in repair stop valves, 15mm bore, fancy type, chromium plated with long shank and cup , (concealed type) screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed all as specified and directed

S&F 15mm bore stop valves/ angle valve, cast copper alloy chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed for iron pipe or union and fixed all as specified and directed.

S&F in repair angle valves, 15mm bore, chromium plated, fancy type, screwed down, high pressure, screwed on both ends, fixed with iron pipe etc complete all as specified

S&F in repair PVC mirror cabinet, size 350x450mm, with shelves of best quality including fixing arrangements, complete all as specified and directed.

S&F in repair glass shelve assembly 60cm in oval shape consisting 8mm to 10mm thick glass including CP guard railing with double rail complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rail, 20mm dia, D type , 60 cm long between flanges complete all as specified and directed.

S&F 110mm bore PVC (SWR) ISI marks pipes single socketed in any length with rubber ring joints fixed to wall or floor incl dismantling of cast iron ,PVC or SGSW drain pipes, jointed in cement mortar and taking out of trenches , if required all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls or floor incl dismantling of cast iron, PVC or SGSW drain pipes, jointed in cement mortar and taking out of trenches , if required complete all as specified.

S& F 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F PVC (SWR ) bends 110 mm bore any radius

S&F PVC (SWR ) bends 75 mm bore any radius

S & F for stack clamps (100 mm pipe) out of 20 mm x 1.5mm plate iron and 16mm dia round iron stays complete all as specified and directed.

M&L 25 mm thick cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in sub base for receiving the floor finishes complete all as specified.

Taking down cement plaster on brick or stone wall including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15 mm thick rendering in CM (1:4) on fair/other than fair faces of brick work finished even and fair complete all as specified and directed.

M&L for 12 mm thick rendering in CM (1:6) on fair/other than fair faces of brick work finished even and fair complete all as specified and directed.

All as per item No 54 above but 5mm thick on ceiling in CM 1:3

M&L for preparation of new plastered surface and applying two coat of cement based paint over and incl one coat of exterior grade cement based primer, complete all as specified and directed.

M&L for preparation of new plastered surface and applying two coats of oil bound distemper, over and incl a layer of wall care putty to get even and smooth level finish on new plastered surface of internal wall, complete all as specified and as directed.

M&L for Granite 20 mm thick over including 10 mm thick CM 1:4 (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rubbing and polishing complete all as specified and as directed.

M&L for preparation of new plastered surface and applying three coats of white wash on new plastered wall surface, complete all as specified and as directed.

M & L for complete removal of existing treatment by brushing, washing, rubbing down, scraping, watering and applying two coats of oil bound distemper over and incl one layer of primer including a thin layer of Birla/JK White wall care putty to get level and smooth surface on old plastered surface of internal wall, complete all as specified and as directed. (Make/Brand : Asian Paints/Nerolac/Berger Paints)

M & L for preparation of old plaster surfaces on ceiling by washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of white wash (lime), complete all as specified and directed. (Source : Best locally available)

M& L for two coat of cement base paint over old surface including preparation of surfaces all as specified & directed.

M&L preparation of old painted steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in any type of soil.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in loose and soft soil.

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundations fillings & mass concrete.

M&L providing RCC1:1.5:3 (nominal mix) M-20 ( using 12.5 mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, slab etc.; basement slabs, under-reamed piles and mass concrete.

Removing excavated material not exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.

M&L for Hardcore (broken stone) of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed

M&L for 75 mm thick PCC 1:4:8 type D2 using 40 mm graded stone aggreagate as in sub base of flooring complete all as directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter

Formwork to sides of pillars, posts, struts, piers, columns and stanchions

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)

M&L for brick work with subclass ‘B’ bricks, old size, straight or curved on plan exc 6m mean radius, built in CM 1:6.

M&L for brick work with subclass ‘B’ bricks, old size, straight or curved on plan exc 6m mean radius, built in CM 1:4

M&L Brick work with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4

M&L Mild steel TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

S&F viterous china squantting pan Orissa pattern size 580 x 440 mm white with 'P' or 'S' trap front or back inlet and feet rest WC's ( excluding flushing cistern and flush pipe) including provision of cement concrete bedding and making good surfaces complete all as specified and directed.

S & F vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed. (Make : Hindware/ Cera/ Parryware / Prayag)

S & F plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. (Make : Hindware/ Cera/ Parryware / Prayag)

S&F of PVC low level flushing cistern 10 lts capacity with ball valve float and handle ,syphonic action type including brackets and flush pipe of polythelene of low or high density or PVC 32 mm dia low level flushing cistern fixed in repairs all as specified and directed.

S&F vitreous china wash hand basin ,white, flat back, size 550x400 mm including chain and plug and porcelain stopper, brackets including cutting for and pinning in ends of brackets or erecting stand

S&F of pillar taps, 15 mm dia, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, complete all specified and directed. Make: Hindware/ Cera/ Prayag / Pearl /Parryware.

S&F chromium plated grating doom 100 mm dia

S&F PVC nahani trap 75 mm dia with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 complete all as directed.

S&F rotational moulded polyethylene cylindrical vertical with closed top water storage tank triple layered white colour 500 ltr capacity with connecting nipple, hoisted and fixed in position on new or existing foudation and making GI tubing inlet or outlet connection complete all as directed.

S&F 20 mm dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed

S&F 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. Minimum weight 15mm-142gms/ 20mm - 210 gms /25mm-455gms/ 40mm - 690 gms).

S&F Flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern

S&F 125/110 mm PVC (SWR) gully trap, setting and jointing with solvent cement

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specification & drawing.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F Aluminium anodised, barrel tower bolts of extruded section of length 150 mm and fixed with cadimium plated wood series, complete all as specified and directed.

S&F 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21

S&F of steel ventilator with top hung shutter including hinges steel peg stay, complete as specified as directed. Note:- The Glass / gauze shell be measured and paid seperately.

S&F 4 mm thick pin headed glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

S&F of mild steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and directed.

M&L for preparing newly plastered surfaces of ceiling and applying two coats of oil bound distemper over coat of puuty to make the surface to be plain and smooth complete all as specified and directed

M&L water proofing treatment to roof slab with APP based modified polymeric membrane centre core 100mm microne HMHDPE outer flim 20 micron each having thickness 3 mm weight not less than 3kg/Sqm with 100mm overlap laid as per manuacturer's instructions and complete all as specified and as directed by Engineer-in-Charge with following course of description below:- (a) 1st coat applying bitumen primer confirming to IS-3384-1965 @ 0.40 Kg/Sqm to be applied on prepared roof surface till the surface is properly impregnated. (b) 2nd coat of bonding material using blown type bitumen conforming to IS-702 of grade 85/25 @ 1.20 Kg/Sqm. (c) 3rd course ie. laying of APP Based modified membrane described herein before with 100mm overlap in longitudinal direction and 150mm in transverse direction, all joints and changes in all direction should be covered covered with cement mortar (1:3) mixed with SBR latex @ 200ml per bag of cement and cured well before laying the membrane.

M&L for applying one coat of bituminious aluminium paint @ 0.20 Kg Per Sqm over APP membrane, complete all as specified and directed.

M&L 75 mm thick PCC(1:3:6) type C-2 (using 40 mm graded broken stone aggregate) as in plinth protection finishing the surface even and fair including cutting grooves 10mm x 30mm deep at every 3.0m interval and filled with mastic filling comprising 1 part of mastic bitumen and 3 parts of sand ( all by weight) complete all as specified and directed.

M&L for factory made PU coated, machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with coloured pigment made of PVC moulded (or rubber mould) with vibrating system, with and including 50mm thick sand cushioning, complete all as specified and directed. Note : The cost of sand cushion is included in rate.

M&L 150mm reinforced concrete pipes, class NP2, laid and jointed with skeins of spun soaked in neat cement wash shall be inserted in the grooves at the ends of the pipes, the two adjoining pipes put against each other the collar is slipped over the joint covering equally both the pipes, more skiens of spun yarn soaked in cement wash shall be passed round the pipes and inserted in the joints by means of caulking tools after that cement mortar 1:2 slightly moistened shall be inserted in the joints finished in 45 degree slope complete Note:- After curing 7 days to the joints the sewage pipe shall be tested as per procedure laid down for water test.

M&L concrete bed to drain pipe for 150 mm dia pipes in PCC (1:4:8) type D2 using 40 mm graded stone aggregate incl packing under and haunching against the sides of pipes after they are laid and tested.

M&L for 40mm thick DPC in cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate incl WPC as specified to horizontal or vertical surfaces including necessary form work complete all as specified and directed. WPC shall be measured and paid separately.

S&F MS box type ventilator fixed type with glazing bar without wire work and glass as per Drg No CEJZ-07/06-07 dated 07.06.07 with guard bar including two coats of synthetic paint complete all as specified and directed. Note :- Glass wire cloth shall be measured and paid separately.

S&F vitreous China half stall type urinal, white with brass CP spreader including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement paste, 32m dia PVC flush pipe and discharge pipe, grating and union for discharge pipe, urinal spreader complete all as specified and directed.

M&L for 100mm bore PVC (SRW) floor trap with grating including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

M&L for preparation of new plastered surfaces on ceiling and soffits surfaces and applying three coats of white wash complete all as specified and directed.

Form work to chajja including edges rough finished surfaces of concrete complete all as specified and directed.

M&L reinforced cement concrete M-25 design mix using 20mm graded aggregate as in beams, lintels etc complete all as specified and directed.

M&L for reinforced cement concrete M-25 design mix using 20mm graded aggregate as in slabs supportred on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for reinforced cement concrete M-25 design mix using 20mm graded aggregate as in chajjas complete all as specified and directed.

M&L for 10mm thick rendering on fair faces of brick or concrete surfaces in CM 1:4 with water proofing compound @3kg/ Sqm by weight of cement complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction single (Single T) equal or unequal .

S&F PVC (SRW) vent cowl 110mm bore.

Supply only integral water proofing compound.

M&L for chequered cement concrete tiles with grey cement and pigment 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry incl 20mm thick 1:6 CM screed bed complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in mass concrete, foundation of manhole including use and waste of form work, if any complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20mm gradede crushed stone aggregate) as in surface channel, drain and benching for manholes with slightly chamfered or rounded angles including use & waste of form work if any and finishing concrete surfaces fair and even complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20mm gradede crushed stone aggregate) as in copings, including use & waste of form work if any and finishing concrete surfaces fair and even complete all as specified and directed.

M&L for brushing neat cement slurry with 3.0 kg of cement per square metre complete all as specified and directed.

M&L for providing precast cement concrete 1:2:4 type B-1 for precast cover for drain in landing, cover slabs (for manbholes etc) waster troughs, shelves and similar articles with plain faces etc, set in cement mortar

M&L for 150mm bore RCC pipes class NP-3 complete with collars laid in trenches and testing complete all as specified and directed. Note :- Excavation & earth work and concrete shall be measured and paid separately.

M&L for 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as concrete bed, alid to fails in trenches in any depth including packing under and haunching against the sides of SGSW / reinforced concrete drain pipes NP-3, 150mm bore after the pipes have been laid and tested complete all as specified and directed.

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopper ends etc complete all as specified and directed .

M&L providing RCC (nominal mix) 1:1:5:3 M-20 (using 12.5 mm graded aggregate) as in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for pre-painted 0.50mm thick Gavalume Aluminium Zinc coating GI based corrugated / semi corrugated / trapezoidal steel sheet of any colour having tensile strength 550 MPa and AZ 150 grade as in roof covering/cladding to walls, fixed with self tapping screws, complete all as specified and directed. Make : Jindal / Tata / Everest

M&L for pre-painted 0.50mm thick Gavalume Aluminium Zinc coating GI based plain steel sheet of any colour having tensile strength 550 MPa and AZ 150 grade as in roof covering/cladding to walls, fixed with self tapping screws, complete all as specified and directed. Make : Jindal / Tata / Everest

M&L for mild steel work as in wind ties for roof including securing bolts necessary drilling, bolting etc, complete all as specified and directed.

S&F of Structural steel for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, Fe-410-W(Gde-E-250) quality-B, complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over and incl one coat of red oxide primer with and incl preparation of new surface of steel not exc 10 cm in width or girth, complete all as specified and directed.

Rough excavation not exceeding 1.5 m deep any type of soil and getting out

Forming embankment with solids incl (raising or lowering ) earth , spread in layers not exce 30 cm thick , watering , ramming / rolling and finished to required size and shape etc; not exc 1.50 mtr height from the base.

M&L for PCC 1:5:10 type E-2 using 40mm graded stone aggregate as in sub-base, floors paving etc

S&F 15mm bore gun metal, glove or gate valve with iron wheel head, screwed both ends with all fittings and fixed complete all as specified and directed.

Spreading and leveling including watering as required and well ramming in layer n. exc 25cm thick such layer complete all as specified and directed.

M&L for cutting into existing manhole for connecting new drains of internal dia 150mm, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming as required complete all as specified and directed.

E/M PORTION Taking down carefully aluminium/copper point wiring for light, fan, bell, socket of point complete fittings such as switches, ceiling roses, pendents, regulator socket etc complete at site and making goods disturbed surfaces of walls, floors etc.

Point wiring with PVC insulated and PVC unsheathed single core multistranded FRLS copper conductor cable of size 1.5 Sqmm including concealed PVC conduit with fittings and making good to the disturbed surfaces with continuous earth wire of PVC insulated and PVC unsheathed single core multistranded FRLS copper conductor cable of size 1.5 Sqmm to common earth including provn of 3mm thick plastic laminated sheet of appropriate size and fixing to and including CI/MS boxes for mounting of accessories like surfaces sockets and regulators etc. complete all as specified for One light / Fan/ bell point controlled by one way switch

All as per Srl item No 145 above but one 5 pin socket outlet 5 amps on same board.

All as per Srl item No 145 above but 5 amps socket outlet on independent board.

All as per serial item No.145 here-in-before but wiring with 2.5 Sqmm FRLS copper wire including one earth wire 2.5 sqmm of copper for 15 Amps 3 pin socket out .

M&L for sub main wiring with two runs of single core multi stranded PVC insulated, copper conductor, grade 1100 Volt , FRLS cable of size 6 sqmm including 6sqmm multistranded copper conductor FRLS cable PVC insulated for earthing duly connected with earth dolly, with approved colour coding including PVC conduit heavy grade, of not less than 1.2mm thick and 32mm dia., concealed in wall with accessories including cutting chases and making good to the disturbed surfaces as per existing and taking down old unserviceable wiring complete all as specified and directed. Note :- (a) Cost of making good the disturbed surface plastering/ filling putty alongwith matching with the existing colour with MES approval make of distemper is deemed to be included in the quoted rate by contractor. (b) Three run of cable alongwith PVC conduit together shall be measured as single run.

S&F switch piano flush type single pole one way 5 amps.

S&F socket outlet 3 pin 5 amps flush type.

S&F switch flush type 15 amps single pole one way

S&F socket outlet 3 pin 15 amps flush type

S&F bell, AC, 230 Volts, single pole complete all as specified and directed.

S&F bell push flush type 6 Amps complete all as specified and directed.

S&F in replacement surface mounting universal batten housing made of powder coated CRCA sheet suitabe for and upto 1 x 18/20W LED tube rod complete all as specified and directed.

S&F LED tube light 20W ultra bright LED polycarbonate tube light with very high efficacy suitable for fitting into tube light batten fitting complete all as as specified and directed.

Taking down carefully ceiling fan complete fittings at site, removing fans, deposting to MES store yard and taking back to site for refixing complete all as specified and as directed.

Hanging only ceiling fan and connecting up including provision of cable from ceiling rose to connector of fan all as specified and directed.

S&F in replacement of fan regulator electronic type 5 step 100 watt, 240 volt and connecting complete all as specified and directed.

S&F for lamp holder PVC body angle including 9 watt LED bulb PVC/ polycarbonate body with back plate complete all as specified and as directed.

M&L ceiling rose, 3 terminals/ phase/ PVC/ polycarbonate, isolated body.

S&F in repair octane 24 watt 4000k LED panel slim compact aluminium die dast edge lit panel recess mounted square with opal diffuser and separate electronic drive 284x 284mm all as specified and directed. Make :- Havells/ Crompton/ Philips.

Supply and fixed in repair sheet metal enclosure for DB’s when MCB’s to be used, 240 volt 8 way with 200 amps rated bus bar SPN double door complete all as specified and directed. Note :- All the connection of incoming and out going wire in MCB will be made with thimble with suitable size as directed

S&F in repair MCB single pole 6 amps to 32 amps complete all as specified and directed.

All as per Srl item No 164 above but single pole and neutral 6 amps to 32 amps.

S&F surface mounting universal batten housing made of powder coated CRCA sheet suitabe for and upto 1 x 18/20W LED tube rod single sided complete all as specified and directed.

S&F switch piano flush type 6 amps single pole one way complete all as specified and directed.

Supply and fixed in repair sheet metal enclosure for DB’s when MCB’s to be used, 240 volt 4 way with SPN double door complete all as specified and directed.

M&L for point wiring with PVC insulated and PVC unsheathed FRLS multistranded copper conductor cable of size 2.5 Sqmm including concealed PVC conduit fitting and making good to the disturbed surfaces continous PVC insulated PVC unsheathed FRLS multisreanded earth wire of copper 2.5 Sqmm dia to common earth including provn of 3mm thick hylem sheet of appropriate size and fixing to existing CI/MS boxes for mounting of accessories like surfaces sockets and regulators complete all as specified and directed.

S&F swich piano flush type single pole 1 way 15 Amp complete all as specified and directed by Engineer-in-Charge.

S&F socket outlet 3 pin 15 amps flush type complete all as specified and directed by Engineer-in-Charge.

Supply and fixing GI pipe 15mm dia medium grade with all fittings and fixed complete to wall and ceiling or load in trenches including drilling hole on wall for incoming and outgoing pipe complete all as specified and directed by Engineer-in-Charge.

Supply and fixing GI pipe 20mm dia medium grade with all fittings and fixed complete to wall and ceiling or load in trenches including drilling hole on wall for incoming and outgoing pipe complete all as specified and directed by Engineer-in-Charge.

S&F bib taps cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe 15mm bore chromium plated fency type complete all as specified and directed.

Supply and fixing stop valve cast copper alloy 15mm dia screwed down high pressure with crutch or butter fly handle screwed both end for iron pipe complete all as specified and directed.

Supply & fixing connecting and testing enegry effcient (BEE 5 star rated) electric water heater vertical storage type (Geyser) of 25 ltr capaicty with stainless steel inner tank, brass assembly, pressure release valve, heating element 1500W including all other accessories with high quilty external finishes single phase with working voltage 240 Volts 50 Hz ISI marked complete all as specified and directed . Note :- The cost of fixing of gyser including stud/ nuts, bolts, washer and making good the distributed surfaces to match with the existing surface is deemed to be include in the unit rate quoted.

S&F and grouting 4 Nos nut & bolts 90mm long 12mm dia in wall for fixing one geyser and fixing by clamp complete all as specified and directed.

Supply and fixing PVC connection 15mm dia PTMT nut bolt of length 300mm complete all as specified and directed.

Supply and install hi wall split AC of capacity 1.5 Ton units indoor/ outdoor complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2 of capacity as shown.

M&L for sub main wiring with two single core PVC insulated, unsheathed, stranded copper conductor cable, FRLS of size 4 sqmm and one PVC insulated, unsheathed, copper conductor cable, FR, of size 2.5 sqmm as earth wire fixed in and including concealed non matalic PVC conduit of appropriate dia complete all as specified and directed. Note :- Three run of cable laongwith PVC conduit together shall be measured as single run).

S&F for voltage stablizer for automatic operation, single phase naturally air cooled indoor type and designed for input variation between 170 V to 250 V with output stabized at 230 V with accracy of +2.5% to - 2.5% and capacity 3.0 KVA complete all as specified and directed.

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amp, 240 Volt complete all as specified and directed.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 sqmm 2 core.

Excavation in trenches in soft and loose soil including cutting road surfaces not exc 1.5 mtr wide and not exc 1.5 mtr in depth for poles, stay, cable , pipe etc getting out complete all as specified and directed.

Returning, filling including spreading and well ramming in layers not exc 25 cm thick in soft loose soil all as specified and directed.

Removing excavation material exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point.

Supply and lay brick common burnt sub class 'B' old size and for protection of cable laid in trenches for under ground cable complete all as specified and directed.

M&L for sand cushioning trenches using fine sand to under ground cable, laid in two layers before laying the cable after laying the cable complete all as specified and directed.

M&L for GI tubing light grade for cable protection fixed long the pole/ under road/ along the wall of size 40mm bore with necessary clamps complete all as specified and directed.

A Schedule of Credit for old/unserviceable demolished/dismantled items has been catered for in the tender. The Schedule of Credit is pre-priced by MES. The final amount of the tender shall be arrived at after deducting the total amount of Schedule of Credit from the total amount of BoQ as per General Summary sheet catered for after Schedule of Credit.

M/S DARSHAN & CO (BID ID -3117265)