PROVN OF BIO DEGRADABLE WASTE SHREDDING AND COMPOSITING MACHINE OF CAPACITY 3.5 TON AT LICHUBARI AT JORHAT MIL STN

Supply & fix 32 Amps industrial socket, 415 Volts, 3 Phases, earthing & neutral complete all as directed.

Supply & fix 63 Amps industrial plug, 415 Volts, 3 Phases, earthing & neutral complete all as directed.

M & L Submain wiring with 2 runs of single core 10 sqmm PVC insulated unsheated multistranded FRLSH 1100 volts grade copper conductor drawn through and including non-metalic rigid PVC casing and caping ISI marked and its accessories including one run of single core 10 sqmm PVC insulated unsheated multistranded FRLSH 1100 volts grade copper conductor cable as earth continuty conductor along with the wiring and connected complete all as specified and as directed. Note:- 2 run of cable, 1 run of earth continuty conductor & casing caping with accessories shall be measured as one running meter.

Supply, Installation, testing & commissioning of Organic Waste Converter Machine as speceifiied and as directed with the followings : - (a) Oragnic waste composting machine of capacity 400-500 Kg/day. Input: Food waste, garden waste & all other organic waste. Output:- Oragnic bio-fertiliser (Balance Biofertiliser rich in micronutrients) (b) Shredder :- Inbuilt twin shaft. (c) Body/Outer shell :- SS 304 (d) Temperature Sensors :- Triple Zone (e) Moisture Sensor :- Yes (f) Operation :- Automatic. (g) Output :- 100-150 Kg soil supplement daily (expected) (h) MS base trolley with wheels. (j) With dual inlet system (solid & liquid) (k) Aitomatic jam detector. (l) Fully automatic control panel with touch screen HMI and forward/reverse shredder operation

Supply, Installation, testing & commissioning of fuel free general waste incinerator with wet scrubber system suitable for domestic dry waste, street sweeping waste, construction and demolition wood waste, sanitary napkins, dry kitchen waste, garden waste, paper, carton boxes, cotton & cloth etc. complete with cmobustion chamber of capacity 50 Kg/hr. Size of combustion chamber should be 600 x 600 x 1750 mm with input door size 400 x 500 mm, inner factort lining with IS-8 fire bricks and 100mm fire clay insulation bricks. Outer shell shall be made out of 5mm thick corrugation free MS plate, providing with ignation door, ash tray/door, air inlet tubes, air filter, temperature sensor, control panel with on/off indication, main MCB, contactor, limit switchs, ID fan control switch with over load rela protector, 0.5 HP motor with with air blower, wet scrubber unit, mounted on cast iron body platform including all accessories, foundation, wiring earthing etc. complete all as specfied and directed.

M & L for Earthing complete with galvanised steel earth plate electrode 600X600X6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr deep below normal ground level, connected to incinerator/LT panel/Feeder pillar etc. and including GI earth strip of 32 x 6mm fixed by means of bolts, nuts, check nuts and washers, protected with and including 40mm dia light grade GI pipe, 20 mm dia GI pipe (Medium grade) for watering, necessary earth work. PCC 1:2:4 type B1 concrete pit, RCC (1:1.5:3) type A1 pre-cast cover (54X54X5 cm) with CI frame duly reinforced with and incl 8 mm dia TMT bar @ 150 mm c/c both ways, one lifting handle made of 8 mm dia TMT bar, embedded in pre-cast cover slab including charcoal, common salt filling in alternative layers all as specified and shown in electrical plate No -3 of SSR Part-I incl testing on completion complete all as specified and directed. Note:- The unit rate includes GI earth strip & 40mm dia GI pipe light grade pipe upto 7.50m from top of earth plate.