Providing and fixing of chain link in old Psychology deptt

Amount

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material outside the University Campus.

Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material outside the University Campus.

Earthwork in excavation in all kinds of soil in foundation, trenches pits and bulk excavation including stacking soil neatly away from the edges, filling back by the sides of foundations in plinth in 150mm thick layers, ramming, watering and consolidation complete including disposal of surplus earth outside the University Campus.

Providing and laying cement concrete in foundation and including machine mixing, consolidation, curing including cost of Centering, shuttering/form work complete. 1:5:10 (1cement: 5 coarse sand: 10 graded crushed stone aggregate 40mm nominal size)

---------do-------------- 1:3:6 (1 cement: 3 coarse sand: 6 graded crushed stone aggregate 20mm nominal bore)

---------do-------------- 1:2:4 (1 cement: 2 coarse sand: 4 graded crushed stone aggregate 20mm nominal bore)

P & L in position reinforcement cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 12.5/20 mm nominal size) including the cost of centering shuttering but excluding cost of reinforcement in:- Columns, Pillars, suspended floors, roofs, landings, balconies, shelves, chajjas & lintels etc. Nothing extra for additional height of formwork shall be paid. All work upto floor V level.

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete . Thermo-Mechanically Treated bars.

Brick work with F.P.S brick of class designation 75 in foundation, plinth and in super structure including cost of scaffolding, curing etc complete. All work upto floor V level. In cement mortar 1:6 ( 1 cement: 6 Coarse sand)

Providing and fixing ISI marked flush door shutters non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters :30 mm thick including ISI marked anodised aluminium butt hinges with necessary screws including applying a coat of wood primer and then painting with synthetic enamal paint (two or more coats) of approved brand and manufacture (Make Asian/Nerolac).

Providing and fixing glazed shutters for doors, windows and clerestory windows including ISI marked black enamelled M.S butt hinges with necessary screws excluding, panelling which will be paid for separately.Second class deodar wood 30mm thick shutter including applying a coat of wood primer and then painting with synthetic enamal paint (two or more coats) of approved brand and manufacture (Make Asian/Nerolac).

Providing and fixing 30mm thick wire gauze shutters using galvanised M.S. wire gauze of average width of aperture 1.4mm with wire of dia. 0.63 mm for doors, windows and clerestory windows including ISI marked bright finished or/and black enamelled M.S. butt hinges with necessary screws : Second class deodar wood including applying a coat of wood primer and then painting with synthetic enamal paint (two or more coats) of approved brand and manufacture (Make Asian/Nerolac).

Providing salwood wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position complete including applying a coat of wood primer and then painting with synthetic enamal paint (two or more coats) of approved brand and manufacture (Make Asian/Nerolac).

Steel work in built up section including cutting, hoisting, fixing in position including making holes. In grating, frames, angle posts, railings, gate and similar work etc. including applying a coat of steel primer and then painting with synthetic enamal paint (two or more coats) of approved brand and manufacture (Make Asian/Nerolac).

Providing and Fixing G.I Chain Link fencing of required width in mesh of 50×50 mm including strengthening with 2mm dia wire or nuts, bolts and washers as required complete as per direction of engineer-in- charge. Made of G.I wire of dia 4mm.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed, consolidated and grouted with fine sand including finishing the top smooth.

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 coarse sand. All work upto floor V level.

Supply of labour for different works Mazdoor

Hire charges of welding set alongwith welder and welding rods etc. complete.

Applying white cement based Putty of average thickness 1mm of approved brand & manufacture on wall surface to give an even finish.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including priming coat with cement primer

Providing and fixing aluminium tower bolts ISI marked anodised ( anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete: 200 x 10 mm

------------do--------------- 150 x 10 mm

Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:125 mm

Providing and fixing aluminium sliding door bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :300x16 mm

Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 110 mm (Make Supreme/Uniplas/Finolex)

P/f of pvc trap of self cleansing design incl. cost of cutting and making good the floors and walls. 100 mm inlet 100mm outlet

P/F G.I. pipes complete with G.I. fittings (Medium Grade) & clamps including cutting holes/chases in walls and making good the same/earth work in trenches. 15 mm nominal bore

----------do-------------- 20 mm nominal bore

Providing and placing on terraces Polyethylene water storage tank ISI: 12701 marked with cover & suitable locking arrangement & making necessary holes for inlet outlet & overflow pipes but without fittings of Sintex/Star make.

P/f PTMT ball cock of approved make complete 15mm nom

P&F white vitreous china pedestal type (European type/wash down type) water closet pan (Parry ware/Hindware/Cera) including providing & fixing solid plastic seat with lid (white colour) and providing and fixing low level PVC flushing cistern with manually controlled device (handle lever) conf. to IS:7231 (Parryware /Hindware/Cera) 10 Liter Capacity-White in colour fitted with unplasticised PVC connection pipe 15mm nominal bore, brass end union 45 to 60cm length, G.I Inlet connection for flush pipe connecting WC pan, C.P brass angle valve (02 Nos.) 15mm nominal bore (Parko / Chilli / Jainco), C.P Jet (heavy duty) with PVC connection pipe to be fixed with European Type W.C complete job. Nothing extra shall be paid.

Providing and fixing PTMT soap dish of standard size and quality (Prayag make).

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality colour and make (Prayag Make) 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190 gms.

P/F mirror, thickness of req. shape and size with plastic moulded frame of approved make and shape with 6 mm thick hard board backing Rectangular Shape 453x357 mm.

P/F CP brass bibcock of ‘Parko/Chilly/Jainco Make’ 15mm nominal bore

Constructing brick masonry' gully chamber 50x45x60 em with bricks of class designation 75 in cement mortar 1:5 ( 1 cement: 5 fine sand) including 500x450 precast R.C.C. horizontal grating with frame: complete as per standard design:With F.P.S bricks

Making khurras 45x45 em with average minimum thickness of 5 em cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.

Finishing walls with water proofing cement paint of required shade Snowcem New work (two or more coats) applied @3.84 kg/10sqm including priming coat with cement primer.

MANOJ KUMAR

aditya puri

TRIKUTA INFRATECH

ashok singh