Tender for Construction of Farm Store at Hiraj Farm, ICAR-NRCP, Solapur

Amount

Details and Specification for Construction of Farm Store at ICAR-NRCP, Solapur

Excavation for foundation in earth, soil of all types, sand, gravel and soft murrum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and 17.79 cum

Excavation for foundation in hard murrum including removing the excavated material upto distance of 50 meters beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 17.79 cum

Filling in plinth and floors with approved excavated material in 15cm. to 20cm. Layers including watering and compacting etc. complete 8.50 cum

Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharges in layers of 15 cm to 20 cm including watering and compaction etc. complete. 63.36 cum

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/granite/quartzite/gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed Sand VSI Grade) 5.87 cum

Providing uncoursed rubble masonry of trap/granite/quartzite/gneiss stone in cement mortar 1:3 in basement with patent water proofing compound added to it at rate of 1 kilogram per bag of cement including bailing out water manually, scaffolding racking out joints when plastering is to be done and watering etc. complete. 34.10 cum

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/granite/quartzite/gneiss metal for R.C.C. coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting, curing, finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel) with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete, With fine aggregate (Crushed sand VSI Grade) 2.84 cum

Providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete 0.3 M.T.

Providing second class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete 36.81 cum

Providing and laying Cast in situ/Ready Mix cement concrete in M20 of trap/granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concreate shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed), with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade 0.89 cum

Providing internal cement plaster 20mm. thick in Single coats in cement mortar 1:3 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete. 173.36 sqm

Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete 173.36 sqm

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15mm thick in cement mortar 1:4 using waterproofing compound at 1 Kilogram per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc. Complete. 148.13 sqm

Providing and fixing in position aluminium partly open able and partly fixed window of any size as per detailed drawing and as directed by Engineer Incharge with all necessary aluminium sections including necessary fixtures and fastening with 5 mm thick float glass etc. complete. B) with powder coating Note while arriving at the rate of item of item weight at 6.90 Kilogram/One Square Metre is considered. 8.18 sqm

Providing and fixing Country cut teak wood double or single leaf second class flush door with 25 mm thick as per detailed drawings. Including the door frame 60 mm x 100 mm stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats. 6.83 sqm

Providing and laying Rough Shahabad Stone Flooring 50 mm to 60 mm thick and of required width in plain/diamond pattern on a bed of 1:6 C.M. including cement float, striking joints, pointing in cement mortar 1:3 curing and cleaning etc. complete. 85.69 sqm

Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. 0.8 M.T.

Providing and fixing colour coated Zinaclume ( R ) AZ150 (min 150 gms/sq.mt. total on each side) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness (BMT) (0.5 mm TCT), Hi-strength steel with min. 550 Mpa yield strength, metallic hot dip coated with Aluminium- Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat (with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center-to-center. The end rib shall be designed for anti-capillary groove and return leg. The feed material should have coil manufacturers products details marked a regular interval. Including fasteners with min. fastened with min.25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/One Square Metre) 107.95 sqm

Providing and applying washing oil-bound distemper of approved colour and shade to old and new surface in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete. 173.36 sqm

Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning, preparing the plaster surface, applying primer coat, scaffolding if necessary, and watering the surface for two days etc. complete. 148.13 sqm

BALASAHEB PANDURANG SHELAKE (BID ID -3131999)

ANKUSH EKNATH BHOSALE (BID ID -3132055)