REPAIR MAINT OF JAFARI WALL PATH BOUNDARY WALL IN OTM AREA AT AF STN SINGARSI UNDER AGE I AF SINGARSI

Amount

Demolition of Brickwork of stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles,complete all as specified and as directed.

M&L for brick work with sub class 'B' old size brick straight or curved on plan exc. 6m mean radius built in cement mortar (1:6), complete all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls etc., including raking out joints, hacking for key, scrubbing down with water etc,complete all as specified and as directed.

Material & Labour for 15mm thick rendering in Cement Mortar (1:6) on brick work or concrete surfaces, finished even and smooth without using any extra cement,complete all as specified and as directed.

M&L for preparation of new surface and and applying two coats of cement base paint over a coat of white cement primer on walls,complete all as specified and as directed.

M&L for Preparation of old plastered or unplastered surfaces of walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efforescent salts, and trading oil and greasy spot by using suitable chemical & removing nails, making good holes with chalk whiting, filling cracks and brooming to remove all dirt etc and applying one coat of Cement based paint on old prepared surfaces of walls, complete all as specified and directed by Engineer-in-Charge.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces,complete all as specified and as directed.

Demolition of reinforced cement concrete in any position (reinforcement cut as required to facilitate demolition) and removing rubbish to a distance 50 m at low lying area, complete all as specified and as directed.

M&L for RCC (nominal mix) Type A1(1:1.5:3) (using 20mm gradded stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and as directed.

M&L for RCC (nominal mix) Type A1(1:1.5:3) (using 20mm gradded stone aggregate) as in Columns, pillars, piers, posts and struts, complete all as specified and as directed.

M&L for RCC (1:1.5:3) A1 (using 20mm gradded stone aggregate) as in beams and lintels above1.50m clear span etc, complete all as specified and as directed.

M&L for Formwork to sides of concrete foundations, footing ,bases of colums, plinth beams rough finished surfaces and similar work, complete all as specified and as directed.

M&L for Formwork to side of columns, fair finished surfaces of concrete square, rectangular and similar work, complete all as specified and as directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams etc, complete all as specified and as directed.

S&F mild steel TMT bars 10mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.9mm dia or securing with clip and confirming to grade Fe-410-W(Gde-250),complete all as specified and as directed.

All as per item no. but 5mm dia and over upto and incl. 10mm dia in stirrups spacers and binders.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for and removing rubbish to a distance not exc. 50 m at low lying area, complete all as specified and as directed.

M&L for 50mm thick cement concrete M-15(1:2:4) type B-1 ( using 20mm graded agg.) as in floor finishing/Plinth protection cement, concrete all as specified and as diredted.

M&L PCC (1:4:8) Type D-2 ( using 40mm graded agg.) as in foundation, filling and mass concrete,complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for,complete all as specified and as directed.

S&F Mild steel framed work as in grills, with ends of bars shouldered work conforming to Fe-410-0 as per existing grills at site,complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description, over 10cm in width or girth,not otherwise described and apply two coats of synthetic enamel paints over a coat of red oxide zinc chrome primer,complete all as specified and as directed.

M&L for Preparation of old steel surfaces of any description not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel paint etc,complete all as specified and as directed.

M/S KUMAR AVINASH (BID ID -3195152)

M/S New Builders Corporation (BID ID -3198842)

M/S MBS TRADING CO (BID ID -3198668)

M/S ASHA ENTERPRISE (BID ID -3195171)

M/S SINGH ENTERPRISE (BID ID -3195306)

M/S Subhadip Enterprise (BID ID -3196608)

LALAN SHARMA (BID ID -3196766)