Loading…
Loading…
Tender Value
₹2.1 Cr
EMD Value
₹4.2 L
Closing Date
25 Sept 2026, 12:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
W2
17 conditions · 5 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The Balance Sheet and all other Financial documents attested/certified by the Chartered Accountant (CA) to substantiate fulfilment of Financial Eligibility Criteria should be with UDIN failing which the offer shall be considered as incomplete and will be summarily rejected without any further reference.
As Per Clause No. 10 of IR GCC-2022, For participating in tender,The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:
(A)Three similar works costing not less than the amount equal to 30% of advertised value of the tender, or (B) Two similar works costing not less than the amount equal to 40% of advertised value of the tender, or (C) One similar work costing not less than the amount equal to 60% of advertised value of the tender. (Substantially Completed Work means an ongoing work in which payment equal to or more than 90% of the present contract value (excluding the payment made for adjustment of Price variation (PVC), if any) has been made to the contractor in that ongoing contract and no proceedings of termination of contract on Contractor's default has been initiated. The credential certificate in this regard should have been issued not prior to 60 days of date of invitation of present tender).
Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered atleast 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates.In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Defination of Similar Work :- Any Civil Engineering work.
10 conditions · 4 needing a document upload
Experience, financial status and ability: Tenderer is required to submit documents detailed here under for evaluation of his credentials.
Employment/Partnership etc. of Retired Railway Employees.:- The tenderer has to give required information regarding association of Retired Railway Employees either as Employee or Partnership etc. in the per-forma as enclosed Annexure-I to this chapter of this tender document as per clause No. 16(a) of IR GCC-2022.
List of works completed & in hand: Tenderer is required to submit, along with his tender, particulars of all works completed by him including works in hand for the Railways or for any other client in the Per-forma enclosed as Annexure-II to this chapter of this tender document. Figures of cost shall not include cost of materials supplied free of cost by the client to the contractor. The tender without this information may be treated as if the tenderer has no works in hand. Supportive documents from the organizations with which the tenderer is workings should be enclosed giving description of work, contract value, date of award, approximate date value of balance work.
List of court cases and arbitration cases: Tenderer is also required to submit, along with his tender, list of arbitration's demanded from any clients during the last five years preceding the date of opening of this tender as per Annexure-III/A to this chapter of this tender document. The tenderer is also required to submit, along with his tender, list of court cases filed against any clients during the last five years preceding the date of opening of this tender as per Annexure-III/B to this chapter of this tender document.
List of plant and machinery: Tenderer has to make his own arrangements for execution of works. The tenderer is required to submit, along with his tender, list of plant and machinery available on hand (own) and proposed to be inducted (own and hired to be given separately) for the subject work in Proforma given in Annexure-IV to this chapter of this tender document. The tender without this information may be treated as if the tenderer has no plant and machinery available on hand (own) and that no plant and machinery are proposed to be inducted for the subject work.
List of personnel and organization: Tenderer is required to submit, along with his tender, list of Personnel and organization available on hand (own) and proposed to be engaged for the subject work in Proforma given in Annexure-V to this chapter of this tender document. The tender without this information may be treated as if the tenderer has no personnel and organization and that no personnel and organization are proposed to be engaged for the subject work.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
As per clause no. 14 of GCC-2022, The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be. (A)HUF: A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (B)Partnership Firm: (i)A notarized copy of the Partnership Deed or a copy of the Partnership deed registered with the Registrar. (ii)A notarized or registered copy of Power of Attorney in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm. (iii)An undertaking by all partners of the partnership firm that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP in which they were / are partners/members. Any Concealment / wrong information in regard to above shall make the bid ineligible or the contract shall be determined under Clause 62 of the Standard General Conditions of Contract. (C)Company registered under Companies Act2013: (i)The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii)A copy of Certificate of Incorporation (iii)A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (D)LLP (Limited Liability Partnership): (i)A copy of LLP Agreement (ii)A copy of Certificate of Incorporation (iii)A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv)An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (E)Registered Society & Registered Trust: (i)A copy of Certificate of Registration (ii)A copy of Memorandum of Association of Society/Trust Deed (iii)A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv)A copy of Rules & Regulations of the Society.
Undertaking:- An undertaking regarding not blacklisted or debarred by Railway or any other Ministry/Department of the Govt. of India from participation in tender/contracts on date of opening of bids to be submitted by all partner/member in case of partnership firm/LLP as per clause 14 of GCC 2022. Concealment/wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract.
As per clause No. 15 of GCC-2022, The tenderer whether sole proprietor / a company or a partnership firm /registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association /Board resolution, failing which tender shall be summarily rejected. A separate power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, shall be submitted after award of work, specifically authorizing him/them to deal with all other contractual activities subsequent to signing of agreement, if required.
Special Repair and Painting in service building in the section of ADEN/I/DBG.
TC-133-2026-SPJ~ECR
TC-133-2026-SPJ
Open
Works - General
6 Months
Samastipur, Bihar
₹0
₹4.2 L
31 Aug 2026
31 Aug 2026
11 Sept 2026
97 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil. | cum | 50 | 260.3 | 13,015 |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. | cum | 50 | 196 | 9,800 |
| 3 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | cum | 50 | 2,123.75 | 1,06,187.5 |
| 4 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. | Sqm | 4000 | 17.6 | 70,400 |
| 5 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 50 | 7,878.5 | 3,93,925 |
| 6 | Foundations, footings, bases for columns | Sqm | 200 | 392.15 | 78,430 |
| 7 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 10 | 9,045.75 | 90,457.5 |
| 8 | Suspended floors, roofs, landings, balconies and access platform | Sqm | 50 | 927.25 | 46,362.5 |
| 9 | Providing, transporting, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete in lintels, beams and bressummers, including setting in cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering and shuttering but , excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 5 | 13,899.2 | 69,496 |
| 10 | Thermo-Mechanically Treated bars of grade Fe- 500D or more. | Kg | 500 | 107.85 | 53,925 |
| 11 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 50 | 7,132.25 | 3,56,612.5 |
| 12 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 50 | 9,105.95 | 4,55,297.5 |
| 13 | cement mortar 1:4 (1 cement : 4 coarse sand) | Sqm | 100 | 905.05 | 90,505 |
| 14 | Cement mortar 1:4 (1 cement :4 coarse sand) | Sqm | 100 | 1,123.8 | 1,12,380 |
| 15 | Area of slab over 0.50 sqm | Sqm | 100 | 5,136.3 | 5,13,630 |
| 16 | Granite work | Metre | 100 | 510.95 | 51,095 |
| 17 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 400 | 1,267.95 | 5,07,180 |
| 18 | Kiln seasoned and chemically treated hollock wood | cum | 5 | 83,378.05 | 4,16,890.25 |
| 19 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 10 | 2,172.1 | 21,721 |
| 20 | 25 mm dia | Metre | 100 | 525.55 | 52,555 |
| 21 | Fixed to steel windows by welding | Kg | 500 | 219.1 | 1,09,550 |
| 22 | 125x64x2.50 mm | Each | 10 | 129.85 | 1,298.5 |
| 23 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. | Each | 20 | 1,124.85 | 22,497 |
| 24 | 300x16 mm | Each | 10 | 303.25 | 3,032.5 |
| 25 | 300x10 mm | Each | 10 | 130.1 | 1,301 |
| 26 | 150x10 mm | Each | 10 | 82.55 | 825.5 |
| 27 | 125 mm | Each | 10 | 66.25 | 662.5 |
| 28 | Twin rubber stopper | Each | 20 | 72.35 | 1,447 |
| 29 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of Engineer- in-Charge. | Metre | 50 | 492.7 | 24,635 |
| 30 | 30 mm thick pre laminated PVC door shutters | Sqm | 20 | 3,663.8 | 73,276 |
| 31 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 1500 | 117.35 | 1,76,025 |
| 32 | Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). | Kg | 50 | 141.7 | 7,085 |
| 33 | Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks. | Sqm | 1500 | 792.05 | 11,88,075 |
| 34 | 40 mm thick with 20 mm nominal size stone aggregate | Sqm | 100 | 614.2 | 61,420 |
| 35 | Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete. | cum | 250 | 8,595.15 | 21,48,787.5 |
| 36 | Light shade pigment using white cement | Sqm | 500 | 1,402 | 7,01,000 |
| 37 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. | Sqm | 75 | 1,096.55 | 82,241.25 |
| 38 | Size of Tile 600x600 mm | Sqm | 100 | 1,553.45 | 1,55,345 |
| 39 | Extra for providing and fixing wind ties of 40x 6 mm flat iron section. | Metre | 500 | 195.6 | 97,800 |
| 40 | 110 mm diameter | Metre | 150 | 377.4 | 56,610 |
| 41 | 110 mm bend | Each | 50 | 150.35 | 7,517.5 |
| 42 | 110 mm | Each | 150 | 371.3 | 55,695 |
| 43 | 2 mm thick flat | Sqm | 100 | 1,245.65 | 1,24,565 |
| 44 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 500 | 738.65 | 3,69,325 |
| 45 | Ridges plain (500 - 600mm) | Metre | 150 | 532.35 | 79,852.5 |
| 46 | Gutter (600 mm over all girth) | Metre | 500 | 1,313.7 | 6,56,850 |
| 47 | 1:6 (1 cement: 6 fine sand) | Sqm | 1000 | 333.35 | 3,33,350 |
| 48 | 1:3 (1 cement: 3 fine sand) | Sqm | 200 | 439.25 | 87,850 |
| 49 | Lettering with black Japan paint of approved brand and manufacture | per letter per cm height | 25000 | 6.15 | 1,53,750 |
| 50 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | Sqm | 15000 | 156.05 | 23,40,750 |
| 51 | Old work (one or more coats) | Sqm | 15000 | 62.7 | 9,40,500 |
| 52 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | Sqm | 15000 | 25.15 | 3,77,250 |
| 53 | One or more coats on old work | Sqm | 750 | 102.8 | 77,100 |
| 54 | Old work (One or more coat applied @ 0.90 ltr/10 sqm). | Sqm | 15000 | 80.65 | 12,09,750 |
| 55 | With cement mortar 1:4 (1cement: 4 coarse sand) | Sqm | 500 | 560.5 | 2,80,250 |
| 56 | Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm) | Sqm | 20 | 1,416.15 | 28,323 |
| 57 | Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm) | Sqm | 20 | 1,906.4 | 38,128 |
| 58 | Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in- Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) | Litre | 20000 | 0.5 | 10,000 |
| 59 | Orissa pattern W.C Pan of size 580x440 mm | Each | 15 | 4,478.75 | 67,181.25 |
| 60 | 3 mm thick | Sqm | 500 | 560.95 | 2,80,475 |
| 61 | Nominal concrete 1:3:6 or richer mix (including equivalent design mix) | cum | 100 | 2,434.25 | 2,43,425 |
| 62 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in- charge, beyond 50 m initial lead, for all leads including all lifts involved. | cum | 150 | 263.95 | 39,592.5 |
| 63 | Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock. | Each | 20 | 1,550.6 | 31,012 |
| 64 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. | Each | 10 | 2,784.95 | 27,849.5 |
| 65 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge. | Each | 40 | 349.15 | 13,966 |
| 66 | 10 litre capacity - White | Each | 20 | 1,190.65 | 23,813 |
| 67 | White solid plastic seat with lid | Each | 10 | 684.85 | 6,848.5 |
| 68 | 32 mm dia | Each | 10 | 119.55 | 1,195.5 |
| 69 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | Each | 20 | 1,607.95 | 32,159 |
| 70 | Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms | Each | 20 | 115.3 | 2,306 |
| 71 | 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms | Each | 20 | 673.4 | 13,468 |
| 72 | 15 mm nominal dia Pipes | Metre | 50 | 286.8 | 14,340 |
| 73 | 20 mm nominal dia Pipes | Metre | 50 | 335 | 16,750 |
| 74 | 25 mm nominal dia Pipes | Metre | 50 | 401.55 | 20,077.5 |
| 75 | 25 mm nominal dia Pipes | Metre | 50 | 355.4 | 17,770 |
| 76 | 50 mm nominal dia Pipes | Metre | 50 | 794.25 | 39,712.5 |
| 77 | 25 mm nominal bore | Each | 5 | 622.4 | 3,112 |
| 78 | 50 mm nominal bore | Each | 5 | 1,026.65 | 5,133.25 |
| 79 | Up to 6 metres depth | Metre | 150 | 747.9 | 1,12,185 |
| 80 | Beyond 6 m and up to 12 m depth | Metre | 150 | 884.85 | 1,32,727.5 |
| 81 | Beyond 12 m and up to 18 m depth | Metre | 150 | 1,025.95 | 1,53,892.5 |
| 82 | Providing and placing in position filters of 40 mm diameter G.I. pipe with brass strainer of approved quality. | Metre | 90 | 960.3 | 86,427 |
| 83 | Providing and fixing to filter and lowering to proper levels 40 mm G.I. pipe for tube well including cleaning and priming the tube well. | Metre | 1500 | 546 | 8,19,000 |
| 84 | Providing and placing in position hand pump of approved quality for 40 mm diameter G.I. pipe complete with all accessories. | Each | 25 | 1,321.65 | 33,041.25 |
| 85 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Per Litre | 6000 | 11 | 66,000 |
| 86 | 15 mm nominal bore, 86 mm long, weighing not less than 88 gms | Each | 100 | 125.6 | 12,560 |
| 87 | 15 mm nominal bore, 86 mm long, weighing not less than 88 gms | Each | 50 | 118.5 | 5,925 |
| 88 | 15 mm nominal bore, 107 mm long, weighing not less than 110 gms | Each | 50 | 208.45 | 10,422.5 |
| 89 | 125 mm nominal dia with 25 mm waste hole | Each | 100 | 51.85 | 5,185 |
| 90 | 25 mm nominal bore, 152mm long, weighing not less than 440 gms | Each | 50 | 523.8 | 26,190 |
| 91 | Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms | Each | 25 | 156.9 | 3,922.5 |
| 92 | Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40 gms | Each | 25 | 121.4 | 3,035 |
| 93 | 15 mm nominal bore with 45 cm length | Each | 50 | 121.9 | 6,095 |
| 94 | 25mm nominal bore, weighing not less than 62 gms | Each | 6 | 113.35 | 680.1 |
| 95 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | Kg | 50 | 495.05 | 24,752.5 |
| 96 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | Kg | 100 | 598.6 | 59,860 |
| 97 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc. to paid separately) | Sqm | 10 | 5,325.9 | 53,259 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
ANNEXUREItoVforIREPS_2.pdf
ATTACHMENT
JPOCircular.pdf
ATTACHMENT
Annexure-VIA.pdf
ATTACHMENT
Annexure-VIB.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .