Loading
Loading…
Loading…
Tender Value
₹1.3 Cr
EMD Value
₹2.2 L
Closing Date
20 Apr 2026, 3:30 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
DD TO SUR
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less, where V= Advertised value of the tender in crores of Rupees & N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of 'total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer must have successfully completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender.
Defination of Similar Work :- Trenching cable laying location and signal foundation /erection/ termination wiring in connection with any Signaling work. OR Any Indoor or combined Indoor & Outdoor Signaling work including Supply, Installation testing and commissioning of relay interlocking (RRI/PI) system for passenger carrying lines.
4 conditions
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Please refer to GCC with ACS and Instructions to Tenderer attached in Documents.
Signalling work in connection with "Construction of ROB in lieu of LC-40 and LC-42 in Solapur-Kurduwadi section of Solapur Division".
SUR-N-T-2025-26-47
SUR-N-T-2025-26-47
Open
Works - General
12 Months
Solapur, Maharashtra
₹0
₹2.2 L
20 Apr 2026
24 Mar 2026
6 Apr 2026
83 items across 3 schedules · ₹1,33,43,324.27 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Modification in existing EI system as per latest TAN, it includes :- Design and modification in existing interface and interlocking circuit of EI system, including modification in VDU, CCIP, MT, Data logger, EI, Relay rack complete wiring conforming to RDSO specification, as per technical requirement & tentative approved signalling plan/diagrams. Required hardware will be provided by railways except the wiring, material (i.e. connectors, interconnecting cable/wires, fuses etc.). The work includes supply of modified ST/LT, interface and logic circuit, CCIP/VDU diagram etc. to suit the approved interlocking plan. It also includes modification in data logger/MT, carrying out FAT, SAT jointly with railways and satisfactory commissioning of the modified EI with full complements as per approved IP and central railway practices. All Plans and wiring diagrams shall be prepared on AUTOCAD and supplied in both soft copy and hard copies(6 sets). Alteration involving modification in upto 10 routes. (Inspection by Consignee). | Per Alteration | 2.00 | 17,16,057.91 | 34,32,115.82 |
| 2 | Supply of Program switches with acrylic cover, snap action, base mounting type along with cover and mounting bracket 25A-7 pole 3 position Siemens type (3 LAO-25/7Y) / L&T/HAVELLS type. Drg. No. RST.C.106. (Inspection by Consignee). | Numbers | 20.00 | 7,415.91 | 1,48,318.2 |
| 3 | Supply of Program switches, snap action, base mounting type along with cover and mounting bracket 63A-7 pole 3 position Siemens type (3 LAO-63/7Y) / L&T/HAVELLS type. Drg. No. RST.C.106 .(Inspection by Consignee) | Numbers | 4.00 | 9,226.79 | 36,907.16 |
| 4 | Supply of Transformer 230V/110V-130V Single Phase 1 KVA as per RDSO/SPN/165/2023 version 4.0 Amendment 1.0 (Or latest) . (Inspection by RDSO) | Numbers | 8.00 | 8,781.44 | 70,251.52 |
| 5 | Supply of Battery Charger self regulating floor mounting type with 230 V AC single phase input and output 110 V DC, 40A as per spec.IRS:S-86/2000 (Amd. 4) (Or latest) . (Inspection by RDSO) | Numbers | 2.00 | 93,822.19 | 1,87,644.38 |
| 6 | Supply of Battery Charger self regulating floor mounting type with 230 V AC single phase input and output 24 V DC, 20A as per spec. IRS:S-86/2000 (Amd. 4) (Or latest) (Inspection by RDSO) | Numbers | 13.00 | 37,823.73 | 4,91,708.49 |
| 7 | Supply of Battery Charger self regulating floor mounting type with 230 V AC single phase input and output 24V DC, 20A as per spec.IRS:S-86/2000 (Amd. 4) (Or latest) . for Axle counter applications (Amd.4) (Inspection by RDSO) | Numbers | 4.00 | 36,438.17 | 1,45,752.68 |
| 8 | Supply of Battery Charger self regulating floor mounting type with 230 V AC single phase input and output 24V DC, 30A as per spec.IRS:S-86/2000 (Amd. 4) (Or latest) for Axle counter applications (Amd.4).(Inspection by RDSO) | Numbers | 4.00 | 59,719.4 | 2,38,877.6 |
| 9 | Supply of 63 A rating, 4 pole changeover switch disconnector with dual shaft position & staggered terminals with sheet steel enclosure and extended handle of Siemens/ L&T/ HAVELLS/ LEGRAND make.(Inspection by Consignee). | Numbers | 2.00 | 7,604.64 | 15,209.28 |
| 10 | Supply of QNA1 AC immunised relay, 8F-8B, 24 VDC along with plug board, retaining clip and connectors confirming to BRS:930: IRS S 34: IRS S 23 (Or latest) (Inspection by RDSO). | Numbers | 2.00 | 3,852.35 | 7,704.7 |
| 11 | Supply of QTA2 AC immunised track relay, 9 Ohm, 2F.1B, along with plug board, retaining clip and connectors conforming to BRS: 939A & 966 (App F2) & IRS:S - 23, S34 & 60 (Or latest) (Inspection by RDSO). | Numbers | 2.00 | 3,859.82 | 7,719.64 |
| 12 | Supply of QBCA1 AC immunised relay, 2FHD - 4B,24VDC along with plug board, retaining clip and connectors conforming to BRS:943; IRS S 34: IRS S 23 IRS S 60-78 (Or latest). (Inspection by RDSO). | Numbers | 2.00 | 4,736.76 | 9,473.52 |
| 13 | Supply of QL1 LATCH relay, 11F-4B or 8F-6B along with plug board, retaining clip and connectors conforming to BRS:935A; IRS S 34:IRS S 23 (Or latest) (Inspection by RDSO). | Numbers | 2.00 | 4,736.76 | 9,473.52 |
| 14 | Supply of Universal LED Lamp proving relay QECX61 relay, 4F-4B,AC conforming to BRS:941A, STS/E/RELAYS/AC LIT LED SIGNAL/09-2002 Amdt1, IRS S-23 & 34 (Or latest)(Inspection by RDSO). | Numbers | 2.00 | 3,724.04 | 7,448.08 |
| 15 | Supply of Apparatus Case with godown locks with detachable handle on both the doors. Single Case as per Drg. No.SK 783-1 & 2 with latest alteration. (Inspection by RITES) | Numbers | 6.00 | 16,020.05 | 96,120.3 |
| 16 | Supply of Apparatus Case with godown locks with detachable handle on both the doors. Half Case as per Drg. No.SK 783-1 & 2 with latest alteration.(Inspection by RITES) | Numbers | 8.00 | 12,853.94 | 1,02,831.52 |
| 17 | Supply of Hand Cuff Locks/ Godrej Navtal lock with Three common keys.(Inspection by Consignee). | Numbers | 40.00 | 286.2 | 11,448 |
| 18 | Supply of Phenolic 10mm thick sheet, grade P3 in standard size of 1.22X1.22 Mtr as per spec. No IS 2036 of 1995. (Inspection by Consignee). | Numbers | 10.00 | 5,250.48 | 52,504.8 |
| 19 | Supply of ARA Terminal blocks with links made of PBT Specn IRS: S-75/2006 (Rev.2) (Or latest) and RDSO Drg.No.SA-23741A Alt.4, SA- 23745 Alt.5, SA-23746, SA-23748 Alt.4 & SA- 23756A Alt.3. (Inspection by RDSO). | Numbers | 1900.00 | 72.61 | 1,37,959 |
| 20 | Supply of cartridge fuse block made of PBT as per RDSO Drg No SA-23748 Alt 4, SA-23749 & Spec No IRS: S-75/2006 (Rev.2) (Or latest). Fuse block shall be suitable for round head type voltage fuses. (Inspection by RDSO). | Numbers | 90.00 | 162.94 | 14,664.6 |
| 21 | Supply of round head type non detoriating type low voltage cartridge fuse as per Specn No IRS/S/78/92 (Or latest) 2A/4A/6A capacity (Inspection by RDSO). | Numbers | 400.00 | 70.13 | 28,052 |
| 22 | Supply of Tik-tak, piano type switches,5 A (as per IS Specification). (Inspection by Consignee) | Numbers | 14.00 | 33.41 | 467.74 |
| 23 | Supply of three pole plug and socket 5 Amp (as per IS Specification). (Inspection by Consignee). | Numbers | 14.00 | 230.86 | 3,232.04 |
| 24 | Supply of Lamp 110V/24W, 2 Pin for Loc. (Inspection by Consignee). | Numbers | 30.00 | 22.73 | 681.9 |
| 25 | Supply of earth electrode assembly as per Drg.No. CR/S&T/SK-815 (Inspection by Consignee). | Numbers | 12.00 | 1,078.08 | 12,936.96 |
| 26 | Maintenance Free Earth as per RDSO/SPN/197, Ver.1.0 (Or latest) consisting of :1) Copper bond steel electrode 3 Mtr long 17mm dia with copper bonding thickness of min. 250 micron & UL listed & marked-01 No. 2) Earth enhancement compound RDSO Approved in sealed bag of 10 Kgs - 03 No. 3) Copper strip 150 x 25 x 6mm - 02 No. 4) Copper strip 300 x 25 x 6mm - 01 No. 5) 35 Sqmm Copper Cable to connect earth electrode to MEEB - 15 Mtr Approx. (Inspection by RDSO)4) Copper strip 300 x 25 x 6mm - 01 No. 5) 35 Sqmm Copper Cable to connect earth electrode to MEEB - 15 Mtr Approx. (Inspection by RDSO). | Set | 4.00 | 17,786.33 | 71,145.32 |
| 27 | Supply of Electronic Timers for DAC reset arrangement 3 sec to 30 sec with 2NO/2NC contact working voltage 24V/60V DC. Siemens/ABB/L&T or SELEC (642XA programmable electronic timer switch) make (Inspection by Consignee). | Numbers | 5.00 | 2,819.28 | 14,096.4 |
| 28 | Supply of GI pipe, inner dia. 100mm dia. B- class as per spec. No.IS 1239 PT. 1/2004 or l a t e s t with sockets and fittings. TATA/JINDAL/ZENITH BIRLA make. (Inspection by Consignee). | Metre | 180.00 | 1,029.32 | 1,85,277.6 |
| 29 | Supply of DWC HDPE pipe with one snap fit coupler and 'O' ring fire resistant, anti rodent, in 6 meter length of size 120 mm outer dia as per RDSO/SPN/204/2011 Ver. 1.1 with Amd.1 or latest. (Inspection by Consignee). | Metre | 300.00 | 321.43 | 96,429 |
| 30 | Supply of Paints as per relevant IS specification preferably Asian/ Apcolite/Dulux m a k e in different colours in one kg pack (Inspection by Consignee). | Kg | 120.00 | 353.07 | 42,368.4 |
| 31 | Supply of RCC pipes half round of size 150mm dia outer and 100 mm dia internal 1 mtr long matching to IS No. 458/2003 amendment-1 with Rev.4. DRG. DRM (S&T) SUR/ 06/2023/A. (Inspection by RITES). | Numbers | 800.00 | 206.14 | 1,64,912 |
| 32 | Design, fabrication and supply of Fuse Alarm System for monitoring Location fuses [HRC type] of various types with automatic changeover facility along with Audio & Visual indications. (Inspection by Consignee).(UNIT- NUMBER=PER FUSE) | Numbers | 160.00 | 1,528.82 | 2,44,611.2 |
| 33 | Supply of as made documents (Manuals for installation, testing and maintenance of the system) (One set consists s i x (06) sets of following documents per station). (i) Manual for installation, testing, commissioning and maintenance of the system for Technicians/Jr. Engineers (Installation and maintenanace level). (ii) Functioning and system overview (Higher Management Level)(iii) Completion document as per special conditions of contract. (iv)Design & Supply of circuits and plans to suit layout given in the signaling plan f o r Hot Standby Architechture Electronic Interlocking (EI) system. All plans and wiring diagram shall be prepared on Autocad Drawing and supplied with CD. This will include supply of Control-cum-Indication Panel/VDU diagram, Square Sheet, Wiring Diagrams (Application Logic and Interface Circuit), Fuse Analysis, Contact Analysis, Tag Block Analysis, Power Supply Distribution / Power Equipment arrangement (with program switch) Diagram, Auto Change over diagram (if supplied by the contractor) and all other relevant drawings. NOTE : The contractor shall initially supply 1 set of documents (Paper Prints) for approval of Railways. He shall ensure that each sheet has a block for signature of Railway Official as well as a block for signature of firm, duly signed by the authorised signatory of the firm. The name of the work as given by Railways shall be written on every sheet under the work column.( Inspection by Consignee). | Lot | 2.00 | 1,73,193.38 | 3,46,386.76 |
| 34 | Supply of GI bend pipe, 'B' class, 50mm dia for cable entry in point machines, along with required fixing arrangements as per standard practice on Central Railway. As per Drg.No DRM(S&T). (Inspection by Consignee). | Numbers | 20.00 | 252.78 | 5,055.6 |
| 35 | Supply of Signal No.plates. as per Drg No RST- 11393 / SK-842 (Inspection by Consignee). | Numbers | 78.00 | 521.69 | 40,691.82 |
| Schedule total | ₹64,80,477.55 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Instructions_To_Tenderer_LC_40__LC_42.pdf Instructions to Tenderer
ATTACHMENT
Special_Conditions_LC_40_0_LC_42.pdf
ATTACHMENT
GCC with ACS
ATTACHMENT
Instructions_To_Tenderer_LC_40__LC_42.pdf
ATTACHMENT
GCC_April-2022_with_ACS_11_13032026.pdf
ATTACHMENT
Tender_form_Annexure-I.pdf
ATTACHMENT
Cable_cut_policy_CR_1st_Sept_23.pdf
ATTACHMENT
Annexures__Drawing_LC_40_and_LC_42.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .