REPAIR TO PATH, DRAIN AND ROADSIDE BERMS IN AOR OF AGE BR-V UNDER GE (NORTH) BATHINDA AT BATHINDA MIL STN

Demolition of cement concrete un- reinforced of any description and in any position not otherwise specifically provided for and including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge

Material and labour for 75mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in flooring, hard standing, plinth protection/path etc. finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge.

M & L for , cement concreteType B1 1:2:4 (20 mm Graded stone aggregate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs

Demolition stone/marble slabs of any description or thickness as in floors/ cooking platform /steps etc. laid bedded and pointed in any mortar including removing rubbish material from the site complete all as specified and as directed by Engineer-in-charge

Material and labour for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade colour and pattern as approved by GE with grey cement and pigment complete all as specified and as directed by the Engineer-in-Charge.

All as per serial item no.5.00 here-in-before but except interlocking paver block (interlocking paver block shall be reterived from serial item no. 5.00 here-in- before ) complete all as specified and directed by Engineer-in-Charge

Material and labour for 25mm thick Sand filling under interlocking tiles including watering and consolidation complete all as specified and as directed by the Engineer-in-Charge.Note: Sand shall be approved by GE before incorporation in the work.

Demolition of brick work or stone / boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, in any description complete all as specified and as directed by Engineer-in-charge.

Material and labour for brick work with bricks old size burnt clay bricks, straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) complete all as specified and as directed by Engineer-in-charge.

Material and labour for rendering / plastering 15mm thick (matching with existing plaster thickness) in cement mortar (1:6) on old brick or concrete surfaces of walls/pillars /cornices in patches matching with existing, finished even and smooth without using extra cement, complete all as specified and as directed by the Engineer-in-Charge.

Taking down cement or cement lime plaster from brick wall etc including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

Material and Labour for prepration of surfaces with and including applying 02 coats of exterior emulsion paint (shade as approved by GE) with highlighter of any approved shade, @ 5 sq.m/litre/2 coats by using roller to external walls/ RCC surfaces / soffits of chajjas / roof projections / cantilevers / balcony etc surfaces over with and including one coat of exterior wall primer @ 11 sq.m/litre/1 coat by using roller as recommended for under coat Over a coat of wall care putty thickness og 1.5mm to 2.5mm by manufacturer of exterior emulsion by using following brands of exterior emulsion paint and exterior emulsion primer as described in LIST OF MAKES/MANUFACTURERS under Appendix 'B' here-in-after complete all as specified and directed by Engineer-in- Charge.

M & L for Brick, stone, Concrete, Plaster surfaces of any description exc 10cm Width or Girth and applying two coats of synthatic enamel paint over one coat of Priming paint palster coat on new surfaces complete all specifiedcand directed.

M & L for Brick, stone, Concrete, Plaster surfaces of any description exc 10cm Width or Girth and applying one coats of synthatic enamel paint over existing surfaces complete all specifiedcand directed.

M&L for painting lines, dashes, arrows, letters, marking etc of 3.0 mm thick film on new surfaces or previously treated road surfaces with hot applied retro reflective thermoplastic road marking paint (White / Golden yellow) conforming to MORT&H (clause 803.4) all as specified with 8% glass beads using special applicator machine with heating arrangement upto 160 degree C including cleaning and drying the existing road surfaces to ensure dust, oil, grease and moisture free surfaces before applying the paint complete all as specified and directed. Make : Automark or equivalent make given in Appx 'B'.

Rough excavation not exceeding 1.5 m deep and getting out soft and loose soil complete all as specified and directed.

M&L PCC 1:2:4 type B1 using 20mm graded stone aggregate as in surface channel / benching incl cost of use and waste of clean sawn wooden form work all as specified

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mi-ted/stoped ends etc