Loading…
Loading…
Tender Value
Refer Docs
Closing Date
30 Jun 2026, 2:00 pm
Similar tender results from the same govt authority in the past 3 years.
Gauge for Shank Body
29255680
29255680
Open - Indigenous
Unknown (Unspecified Location)
₹0
Exempted
15 Jun 2026
15 Jun 2026
Description :Gauge for Shank Body - 39 mm, Required size: NOGO-36.0 mm (Snap Type) Ref. Drg. No. RD SO SK 79063 Alt-4 & SK 99007 Material - Tool Steel, IS 3748/90 Hardness - 50/55 HRC. Supply with Calibrati on Certificate - Valid for min. 01 Year issued from NABL Approved Lab or similar accreditation board. [ War ranty Period: 30 Months after the date of delivery ] ] Consignee H.TXR/DNR, ECR Bihar 4.00 Numbers Inspection Details Stage Inspection Not Required
Description :Gauge for 155 mm Draft Key slot. Wear Limit - 9 mm. Required size: NOGO - 164.0 mm (Sna p Type) Ref. Drg. No. RDSO SK 79063 Alt-4 & SK 99007 Material - Tool Steel, IS 3748/90 Hardness - 50/55 H RC. Supply with Calibration Certificate - Valid for 01 Year issued from Lab Approved from NABL or similar ac creditation board. [ Warranty Period: 30 Months after the date of delivery ] ] Consignee H.TXR/DNR, ECR Bihar 4.00 Numbers Inspection Details Stage Inspection Not Required
Description :Gauge for Draft Key Slot Width - 38 mm, Required size: NOGO-40.0 mm (Flat Type) Ref. Drg. No. RDSO SK 79063 Alt-4 & SK 99007 Material - Tool Steel, IS 3748/90 Hardness - 50/55 HRC. Supply with C alibration Certificate - Valid for min. 01 Year issued from NABL Approved Lab or similar accreditation board. [ Warranty Period: 30 Months after the date of delivery ] ] Consignee H.TXR/DNR, ECR Bihar 4.00 Numbers Inspection Details Stage Inspection Not Required
Description :Gauge for 62 mm Dia Pin Hole of Draw Hook. Required size - NOGO - 65.0 mm (Flat Type) Ref . Drg. No. RDSO SK 79062 Alt-05 & 99007 Material - Tool Steel, IS 3748/90 Hardness - 50/55 HRC. Supply wi th Calibration Certificate - Valid for min. 01 Year issued from NABL Approved Lab or similar accreditation bo ard. [ Warranty Period: 30 Months after the date of delivery ] ] Consignee H.TXR/DNR, ECR Bihar 4.00 Numbers Inspection Details Stage Inspection Not Required
DANAPUR DIVISION-STORES/EAST CENTRAL RLY Description :Gauge for Bottom Side of Shank - 56 mm Height Draw Hook, Required size: NOGO - 41.0 mm (Snap Type) Ref. Drg. No. RDSO SK 79062 Alt-05 & 99007 Material - Tool Steel, IS 3748/90 Hardness - 50/55 HRC. Supply with Calibration Certificate - Valid for min. 01 Year issued from NABL Approved Lab or similar a ccreditation board. [ Warranty Period: 30 Months after the date of delivery ] ] Consignee H.TXR/DNR, ECR Bihar 4.00 Numbers Inspection Details Stage Inspection Not Required
Description :Gauge for Draft Width. Required size: NOGO - 40.0 mm (Flat Type) Ref. Drg. No. RDSO SK 79
Certificate - Valid for min. 01 Year issued from NABL Approved Lab or similar accreditation board. [ Warran ty Period: 30 Months after the date of delivery ] ] Consignee H.TXR/DNR, ECR Bihar 4.00 Numbers Inspection Details Stage Inspection Not Required
Description :Plug Gauge (GO & NOGO) for Draw Hook Opening. Required size - GO - 46.0 mm & NOGO - 5 3.0 mm Ref. Drg. No. RDSO SK 79062 Alt-05 & 99007 Material - Tool Steel, IS 3748/90 Hardness - 50/55 HR C. Supply with Calibration Certificate - Valid for min. 01 Year issued from NABL Approved Lab or similar accreditation board. [ Warranty Period: 30 Months after the date of delivery ] ] Consignee H.TXR/DNR, ECR Bihar 4.00 Numbers Inspection Details Stage Inspection Not Required
Description :Gauge (GO & NOGO) for Bent Link U-Gap - 78 mm (Gauge for Screw coupling) Required size: GO - 77 mm & NOGO - 85 mm Ref. Drg. No. RDSO - SK - 79068 Alt-08 & SK - 99002 Material - Tool Steel, IS 3748/90 Hardness - 50/55 HRC. Supply with Calibration Certificate - Valid for min. 01 Year issued from NAB L Approved Lab or similar accreditation board. [ Warranty Period: 30 Months after the date of delivery ] ] Consignee H.TXR/DNR, ECR Bihar 4.00 Numbers Inspection Details Stage Inspection Not Required
Description :Gauge for Pin on Draw Hook. Required size: NOGO - 58 mm (Snap Type) Ref. Drg. No. RDSO - SK -79068 Alt-08 & SK - 99002 Material - Tool Steel, IS 3748/90 Hardness - 50/55 HRC. Supply with Calibrati on Certificate - Valid for 01 Year issued from Lab Approved from NABL or similar accreditation board. [ War ranty Period: 30 Months after the date of delivery ] ] Consignee H.TXR/DNR, ECR Bihar 4.00 Numbers Inspection Details Stage Inspection Not Required
Description :Thread Profile Ring Gauge (GO - 01 No. & NOGO - 01 No.), Required size: M39 X 3 mm (Exter nal), Wear Limit - 1mm Ref. Drg. No. RDSO SK 79063 Alt-4 & SK 99007 Material - Tool Steel, IS 3748/90 Har dness - 50/55 HRC. Supply with Calibration Certificate - Valid for min. 01 Year issued from NABL Approved L ab or similar accreditation board. [ Warranty Period: 30 Months after the date of delivery ] ] Consignee H.TXR/DNR, ECR Bihar 8.00 Numbers Inspection Details Stage Inspection Not Required
Description :Profile Gauge with - 15 mm. Adjustable Projection for Root of the hook near the Point of conta ct with Bent Link (Gauge for Draw hook). Ref. Drg No. RDSO - SK - 79062 Alt-05 & 99007. Material Tool Stee l. IS - 3748/90, Hardness - 50 / 55 HRC Supply with Calibration Certificate - Valid for 01 Year issued from La b Approved from NABL or similar accreditation board. [ Warranty Period: 30 Months after the date of deli very ] ] Consignee H.TXR/DNR, ECR Bihar 4.00 Numbers Inspection Details Stage Inspection Not Required
Description :Gauge for Buffer Spindle body. Dia - 40 mm. Wear limit - 5 mm. Required size: NOGO - 35.00 mm (Snap Type) Ref. Drg. No. W/BD - 353 Material - Tool Steel, IS 3748/90 Hardness - 50/55 HRC. Supply wi th Calibration Certificate - Valid for 01 Year issued from Lab Approved from NABL or similar accreditation bo ard. [ Warranty Period: 30 Months after the date of delivery ] ] Consignee H.TXR/DNR, ECR Bihar 4.00 Numbers Inspection Details Stage Inspection Not Required
DANAPUR DIVISION-STORES/EAST CENTRAL RLY Description :Thread Profile Gauge External (GO & NOGO) Size - 39 x 3 mm (Ring gauge). Wear Limit - 0.5 mm. Ref. Drg. No. W/BD - 353 Material - Tool Steel/ Stainless Steel & Hardened Supply with Calibration Certificate - Valid for 01 Year issued from Lab Approved from NABL or similar accreditation board. [ Warra nty Period: 30 Months after the date of delivery ] ] Consignee H.TXR/DNR, ECR Bihar 8.00 Numbers Inspection Details Stage Inspection Not Required
Description :Gauge for Buffer plunger tube wall thickness 9 mm. Wear Limit - 4 mm. Required size: NOGO - 5.0 mm (Snap Type) Ref. Drg. No. W/BD - 355 & 359 and SK 94255 & SK 94256 Material - Tool Steel, IS 37 48/90 Hardness 50/55 HRC. Supply with Calibration Certificate - Valid for min. 01 Year issued from NABL Ap proved Lab or similar accreditation board. [ Warranty Period: 30 Months after the date of delivery ] ] Consignee H.TXR/DNR, ECR Bihar 4.00 Numbers Inspection Details Stage Inspection Not Required
Description :Gauge for Plunger face/ face plate 19 mm. Wear Limit - 11 mm. Required size - 1905 mm cur vature gauge with depth measurement Ref. Drg. No. W/BD - 355 & 359 and SK 94255 & SK 94256 Material - Tool Steel, IS 3748/90 Hardness - 50/55 HRC. Supply with Calibration Certificate - Valid for min. 01 Year iss ued from NABL Approved Lab or similar accreditation board. [ Warranty Period: 30 Months after the date of delivery ] ] Consignee H.TXR/DNR, ECR Bihar 4.00 Numbers Inspection Details Stage Inspection Not Required
Description :Gauge for Trunnion 76 mm Thickness. Required size - NOGO - 72 mm (Snap Type) Ref. Drg. N o. RDSO- SK - 79068 Alt-08 & SK - 99002 Material - Tool Steel, IS 3748/90 Hardness - 50/55 HRC. Supply wit h Calibration Certificate - Valid for min. 01 Year issued from NABL Approved Lab or similar accreditation bo ard. [ Warranty Period: 30 Months after the date of delivery ] ] Consignee H.TXR/DNR, ECR Bihar 4.00 Numbers Inspection Details Stage Inspection Not Required
Description :Gauge for 46 mm Dia Pin. Required size - NOGO - 44.0 mm (Snap Type) Ref. Drg. No. RDSO - SK 79068 Alt-08 & SK - 99002 Material - Tool Steel, IS 3748/90 Hardness - 50/55 HRC. Supply with Calibration Certificate - Valid for min. 01 Year issued from NABL Approved Lab or similar accreditation boar d. [ Warranty Period: 30 Months after the date of delivery ] ] Consignee H.TXR/DNR, ECR Bihar 4.00 Numbers Inspection Details Stage Inspection Not Required
Description :Gauge for Hole on Straight Link. 61 mm Dia Hole. Required size - NOGO - 63.0 mm (Flat Type ) Ref. Drg. No. RDSO - SK - 79068 Alt-08 & SK - 99002 Material - Tool Steel, IS 3748/90 Hardness - 50/55 HR C. Supply with Calibration Certificate - Valid for 01 Year issued from Lab Approved from NABL or similar acc reditation board. [ Warranty Period: 30 Months after the date of delivery ] ] Consignee H.TXR/DNR, ECR Bihar 4.00 Numbers Inspection Details Stage Inspection Not Required
Description :Gauge for Hole on Straight Link. 47 mm Dia Hole. Required size - NOGO - 49.0 mm (Flat Type ) Ref. Drg. No. RDSO - SK - 79068 Alt-08 & SK - 99002 Material - Tool Steel, IS 3748/90Hardness - 50/55 HRC. Supply with Calibration Certificate - Valid for 01 Year issued from Lab Approved from NABL or similar accreditation board. [ Warranty Period: 30 Months after the date of delivery ] ] Consignee H.TXR/DNR, ECR Bihar 4.00 Numbers Inspection Details Stage Inspection Not Required
Description :Gauge for Bent Link Stem. Dia - 42 mm. Required size - NOGO - 39.0 mm (Snap Type) Ref. Dr g. No. RDSO - SK - 79068 Alt-08 & SK - 99002 Material - Tool Steel, IS 3748/90 Hardness - 50/55 HRC. Suppl y with Calibration Certificate - Valid for 01 Year issued from Lab Approved from NABL or similar accreditatio n board. [ Warranty Period: 30 Months after the date of delivery ] ] Consignee H.TXR/DNR, ECR Bihar 4.00 Numbers Inspection Details Stage Inspection Not Required
DANAPUR DIVISION-STORES/EAST CENTRAL RLY Description :K- Thread Profile Gauge (Ring gauge type) for Screw. Size - 55 x 6.35 mm - K/Thread. GO & N OGO gauge. Wear Limit - 1 mm Ref. Drg. No. RDSO - SK - 79068 Alt-08 & SK - 99002 Material - Stainless Ste el & Hardened. Supply with Calibration Certificate - Valid for 01 Year issued from Lab Approved from NABL or similar accreditation board. [ Warranty Period: 30 Months after the date of delivery ] ] Consignee H.TXR/DNR, ECR Bihar 8.00 Numbers Inspection Details Stage Inspection Not Required
Description :K- Thread Profile Gauge (Plug gauge type) for Trunnion - LH/RH. Size - 55.635 x 6.35 mm - D/ Thread. GO & NOGO gauge. Wear Limit - 1 mm Ref. Drg. No. RDSO - SK - 79068 Alt-08 & SK - 99002 Materia l - Stainless Steel & Hardened. Supply with Calibration Certificate - Valid for min. 01 Year issued from NABL Approved Lab or similar accreditation board. [ Warranty Period: 30 Months after the date of delivery ] ] Consignee H.TXR/DNR, ECR Bihar 8.00 Numbers Inspection Details Stage Inspection Not Required
Description :Feeler gauge Required size: 0.80 mm (+0.00/ -0.10 mm)Material - Tool Steel, IS 3748/90 Har dness - 50/55 HRC. Supply with Calibration Certificate Valid for min. 01 Year issued from NABL Approved La b [ Warranty Period: 30 Months after the date of delivery ] ] Consignee H.TXR/DNR, ECR Bihar 4.00 Numbers Inspection Details Stage Inspection Not Required
Description :Feeler gauge Required size: 1 mm Material - Tool Steel, IS 3748/90 Hardness - 50/55 HRC. Su pply with Calibration Certificate Valid for min. 01 Year issued from NABL Approved Lab or similar accreditati on board. [ Warranty Period: 30 Months after the date of delivery ] ] Consignee H.TXR/DNR, ECR Bihar 4.00 Numbers Inspection Details Stage Inspection Not Required
Description :Feeler gauge Required size: 2 mm Material - Tool Steel, IS 3748/90 Hardness - 50/55 HRC. Su pply with Calibration Certificate Valid for min. 01 Year issued from NABL Approved Lab or similar accreditati on board. [ Warranty Period: 30 Months after the date of delivery ] ] Consignee H.TXR/DNR, ECR Bihar 4.00 Numbers Inspection Details Stage Inspection Not Required
Description :Feeler gauge Required size: 3 mm Material - Tool Steel, IS 3748/90 Hardness - 50/55 HRC. Su pply with Calibration Certificate Valid for min. 01 Year issued from NABL Approved Lab or similar accreditati on board. [ Warranty Period: 30 Months after the date of delivery ] ] Consignee H.TXR/DNR, ECR Bihar 4.00 Numbers Inspection Details Stage Inspection Not Required
Description :Feeler gauge Required size: 4 mm Material - Tool Steel, IS 3748/90 Hardness - 50/55 HRC. Su pply with Calibration Certificate Valid for min. 01 Year issued from NABL Approved Lab or similar accreditati on board. [ Warranty Period: 30 Months after the date of delivery ] ] Consignee H.TXR/DNR, ECR Bihar 4.00 Numbers Inspection Details Stage Inspection Not Required
Description :Gauge for Draft Key Slot - 159 mm, Required size: NOGO - 173.0 mm (Flat Type) Ref. Drg. No . RDSO SK 79062 Alt-05 & 99007 Material - Tool Steel, IS 3748/90 Hardness - 50/55 HRC. Supply with Calibr ation Certificate - Valid for min. 01 Year issued from NABL Approved Lab or similar accreditation board. [ W arranty Period: 30 Months after the date of delivery ] ] Consignee H.TXR/DNR, ECR Bihar 4.00 Numbers Inspection Details Stage Inspection Not Required
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
4860802.pdf
ATTACHMENT
5519987.pdf
ATTACHMENT
5488008.pdf
ATTACHMENT
Download all tender documents and submit your bid