Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.5 CrAccepted-AOC | ₹10.5 Cr | L1 | Accepted-AOC Lowest |
| 2 | L2₹11.1 CrRejected-Finance 421 4TH FLOOR TOWER A 2 SPAZE ITECH PARK SECTOR 49 SOHNA ROAD GURGAON | GURUGRAM | HARYANA | 122001 | ₹11.1 Cr | L2 | Rejected-Finance Rates are on higher side |
| 3 | L3₹11.1 CrRejected-Finance 205 MITTAL ENCLAVE JABALPUR ROAD KATNI M P 483501 | KATNI | KATNI | MADHYA PRADESH | 483501 | ₹11.1 Cr | L3 | Rejected-Finance Rates are on higher side |
| 4 | Not Admitted-Fee/PreQual/Technical | - | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
₹10.6 Cr
EMD Value
₹21.2 L
Closing Date
30 Aug 2019, 2:00 pmClosed
Vaneet Chawla
HSWC, SEctor 2, Panchkula
Construction 17864 MT capacity godowns including arch shaped galvalume sheet roofing, office block, boundary wall, roads, weighbridge cabin, pit and E.I. work at SWH, Nayabans. (Distt Rohtak)
2019_HBC_96833_1
Construction 17864 MT capacity godowns including
Open Tender
Electrical Works
120 days
HSWC
Refer DNIT
3 documents required · 3 mandatory
₹11,800
Yes
Haryana State Warehousing Corporation
₹21.2 L
Yes
3 Jul 2025
22 Aug 2019
30 Aug 2019
22 Aug 2019
30 Aug 2019
22 Aug 2019
Amount
Extra for cost of plasticizer used in gutter beam for RCC work complete as per DNIT.
Providing & laying concertina coil of galvanized iron on b/wall Y shape with angles as per DNIT
P/F CP brass bib cock 15mm dia Jaguar make model No. 39307 complete as per DNIT
P/F CP brass angular stop cock 15mm dia Jaguar make model No. 39053 complete as per DNIT
P/F PVC flexible tube connection 18" long best quality complete as per HSR
P/F jet system CP brass for W.C complete as per HSR
P/L Ant termite treatment complete as per DNIT
Earth work non plastic or tibba sand under floors taken form outside of campus area with all lead and lift including loading, unloading, laid in 15 cm layer including ramming, watering, consolidating compaction and compensation of earth etc. complete in all respect as per the direction or engineer in charge. This includes construction of embankment and subgrade for road & parking area compacted to meet requirement of table 300-2 of MORTH specification clause No. 305. The finished road surface will be as per X-section approved by Engineer-in-charge with respect to GTS. Further it shall be ensured that atleast 300 mm of subgrade shall be constructed at each location. Wherever any cutting of existing subgrade is required on this account excavation as well as handling and disposal of earthwork to accommodate minimum 300mm thick subgrade shall be carried out by the agency at his own cost. Nothing extra will be paid on this account
P/F Chromium plates with steel railing complete as per DNIT.
P/f M.S PVC seat as per DNIT
S/F M.S sheet as per DNIT
P/F English seat wall hanging jaguar or other reputed make with concealed cistern as per DNIT
P/f PVC cowl 4"x4"x4" complete as per DNIT
P/f PVC cowl 4"x4"x3" complete as per DNIT
Flex board with 1" sq pipe flex digital printing on 13 oz material size 50'x3' wall mounted as per DNIT
Supply of granite stone of desired shades complete as per DNIT
S/F waste pipe 1" dia compete as per HSR
WBM 3” thick compacted using 53 to 22.4mm stone metal laid in one layer complete in all respects as per PWD specification.
WBM 6” thick compacted using 63 to 45mm and 53 to 22.4mm stone metal laid in two layer complete in all respects as per PWD specification.
P/F khaprail on tapered surface of roofing in cement sand mortar 20 mm thick 1:3 as per DNIT
P/F aluminum peg stay 250 mm long with nuts & screws
P/F peg stay 200 mm long aluminum as per DNIT
Providing and fixing stainless steel wire gauge as per DNIT.
Providing & fixing peg stay including necessary screws complete as per DNIT.
Providing & fixing MS handle including necessary screws complete as per DNIT.
Supply of steel gates 6’X8’ size as per design & drawing of the Corporation.
Fixing of steel gates in gate size 6’X8’opening including cost of cement concrete 1:1½:3
Providing & fixing 100 mm long fasteners with nuts for fixing grill in wall/column as per DNIT
Providing and fixing marble stone strips 13to 17mm x50mm in flooring as per DNIT.
Supply & fixing welded mesh/monkey gates as per drawing and design of the Corporation complete as per DNIT.
Providing and laying PVC socket 100mm dia for rain water pipe of ISI make
Providing and fixing finishing of surface using mechanical floater/ dic complete as per DNIT
Providing and fixing Kotah stone strips 20 to 25mmx50 mm in flooring as per HSR
Providing and fixing poly carbonate sheet 2 mm thick of lean make complete as per DNIT.
P/L Dewatering system of C.C by vacuum vibrator surface trowel fix in complete as per DNIT.
P/F galvalume/Zincalume steel sheet verandah roofing 0.50mm(Total thickness) (only ±0.02 mm tolerance allowed)thick with tensile strength 550mpa, with coating mass @ 150gm/Sqm, of approved blue colour (RAL-5012) fixed self screw-sloping roof without curvature of TATA BlueScope, JSW Steel Ltd. , Dongbu Steel Co. ltd(Korea) & Bhushan steel making with coating of 55% aluminum, 43.5% Zinc and 1.5% silicon as per IS code- 15961, 15965 and all other relevant Indian codes as per approved design & drawing of the Corporation
P/F arch shaped galvalume/Zincalume steel sheet roofing 1.00 mm (BMT)(only ±0.02 mm tolerance allowed) and total thickness 1.075mm (only ±0.02 mm tolerance allowed) with Steel grade: YS 350 as per IS:15961:2012, coating mass 150 gram per sqm. etc of TATA BlueScope , JSW Steel Ltd, BlueScope (Australia), Thyseen Krupps (Germany), Dongbu Steel Co. ltd(Korea). Corus steels (U.K.), Dofasco steel (Canada), Bethelehem Steel (U.S.A) making with coating of 55% Aluminum, 43.5% Zinc and 1.5% Silicon as per IS code- 15961, 15965 type-III, 513, 16163 and all other relevant Indian codes as per approved design & drawing of the Corporation
P/F galvalume/Zincalume steel sheet roofing 0.45 mm thick with corrugation (khaprail type)including DONG BU/ blue scope, JSW Steel Ltd & Bhushan Steels with tensile strength 550mpa. With coating @ 150gm/Sqm including cost of tubular trusses using M.S square pipe with painting as per specification, drawings & design approved by corporation
Supply of G.I. pipe (b) class ISI make 15mm dia as per DNIT.
P/F 15 mm gunmetal gate valve ISI Heavy as per DNIT.
Supply and fixing HCI cover 18"*18" as per DNIT.
P/F aluminum work mosquito zali for window as per DNIT
P/F 1/2" dia GI pipe B-class including cost of special complete as per DNIT 15 mm
P/F 4" dia PVC pipe complete as per DNIT
P/F 3' dia PVC pipe complete as per DNIT
P/F aluminum ped stay 200 mm long with nuts & screw as per DNIT
(ii) Extra for tinted glass complete as per DNIT.
P/F Gunmetal gate valve 3/4" dia complete as per DNIT
P/F gunmetal gate valve 1 1/4" dia complete as per DNIT
P/F PVC floor trap 4" dia complete as per DNIT
P/F CP brass towel rail 600 mm long as per DNIT
Boring 10" dia bore with machine 250' deep bore including Cost of diesel, labour & rent of machine cartage etc. complete in all respects
Supplying of 9" dia PVC pipes ISI brand 6 kg/square cm, 53 kg weight /20',250' pipe used including vat and cartage etc complete as per DNIT
Supply of end cap 9" dia ISI make complete as per DNIT
Preparing of cavity 40'-0" deep including rent of generator set. Motor 10 HP, cost of diesel & labour etc.
Cost of 250mm dia PVC socket heavy, ISI make as per DNIT.
Cost of solution & copper rivet as per DNIT.
Supply of tee 9" dia ISI make complete as per DNIT.
Supply of elbow 9" dia ISI make complete as per DNIT.
Preparation of filter including cost of filter Zali and soot dhage etc. complete as per HSR.
Cost of HCI grating 12"x12" complete as per DNIT.
Supply of PVC reducer ISI make 9"x5" complete as per DNIT.
P/F NO smoking Board 2'*1' ON ACP sheet with vinyl pasting on it Fixed with Rawl plugs at site.
Godown Nos Board size 4' * 2' made up of 3mm ACP sheet with Vinyl printing
Speed breaker size 500*375*53mm conc. Filling and Epoxy with 6 pins for fixing in concrete.
Flex Board with 1" sq pipe flex digital printing on 13 oz material size 72' * 3' wall mounted
Flex Board on 1" Sq pipe office board 30' * 3'with flex digital printing on 13 oz material wall mounted
Flex Board with 1" sq pipe flex digital printing on 13 oz material wall mounted 8' * 4'
Boring 6" dia bore with machine 160' deep bore including cost of diesel, labour & rent of machine cartage etc, compute in all respects
Cost of submersible pump ISI make CRI/KSB or Crompton ISI make 2HP 12 stage with penal set including VAT charges complete as per DNIT.
Cost of electric cable 2.5mm ISI make including VAT charges complete as per DNIT.
Cost of pvc pipe 4" internal dia 10Kg /cm2 of approved brand including vat & cartage etc as per DNIT
Cost of PVC filter with PVC jali, rope & labour for making holes excluding cost of pipe including VAT charges complete as per DNIT.
S/F electric starter make of Bajaj ISI make as per DNIT.
Cost of specials GI pipe line 25 mm ISI make.
Supply and fixing top base plate
Providing and planting phycus plant 5 feet.
Providing and planting royal palm tree.
Providing and planting Gulmohar tree.
Providing and planting Ashoka tree.
Providing Executive table 6'x3' as per drawing and design of corporation. as per DNIT
Providing Office table 5'x2.5'as per drawing and design of corporation. as per DNIT
Providing Executive Chair for Manager as per drawing and design of corporation. as per DNIT
Providing office chair for staff as per drawing and design of corporation complete as per DNIT
Providing visitor's chair as per drawing and design of corporation complete as per DNIT
Providing big Almirah as per drawing and design of corporation complete as per DNIT
Providing computer table 4'x2' as per drawing and design of corporation complete as per DNIT
Providing Computer operator's chair as per drawing and design of corporation complete as per DNIT
Providing three seater for class IV as per drawing and design of corporation complete as per DNIT
Providing Inverter 800W Excide battery complete as per DNIT
P/F of LED bulb 14/15 watt Phillips make. complete as per DNIT (Havells, Crompton and Philips)
Supply and Fixing of Street Light 70 watt (Havells/Crompton/Philips) complete as per DNIT
P/F of LED tube light fitting 20 w 1X4’ with tube 20w(Havells/Philips complete as per DNIT)
S/E of ceiling fan 48” double ball bearing make (Havells,Fusion,Model/Areole new complete as per DNIT
S/E of exhaust fan 12” Fresh Air Heavy Duty (Havells,Crompton/Bajaj) complete as per DNIT
S/E of 3-Pin Top 5A (Anchor/SSK) complete as per DNIT
Bidder Name
Amount
Aalaya Engineering Project Private Limited
Sh Vinod Kumar Gupta Contractor
MSLR Private Limited
Sh Vinod Kumar Gupta Contractor
MSLR Private Limited
MSLR Private Limited
Aalaya Engineering Project Private Limited
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid