Construction of Gym Hall at...

Amount

N.S. Item EI Works

NS Item-S/E of 36 watt LED 600x600 mm surface panel light fitting (Bajaj/Philips/Crompton/Wipro/GE/Havells/Halonix) make including all patty material required to complete the job in all respect.

S/E of 100 watt LED flood light fitting (Philips/ Wipro/ Havells) make including making necessary connetions

S/E of 18/20 watt LED Batten light fitting (Philips, Bajaj, Crompton, Wipro, Surya, Havells) make including making necessary connections.

S/E of 600 x600 mm 36 watt LED surface pannel light (Philips/ Bajaj/ Crompton/ Wipro/ Havells/surya) including making necessery connections

S/E of 25 sq mm 4 core armoured cable of approved make including all necessary connections.

Air swing functions:by swinging both legs togrther from side to side the surfing board strengthness and developes the lower abdomen hips and thigh improves balance and coordination through `core`activation .Approaches :stand on the pedals and grasp the handles with both hands ,swing from left to right .size:11150x900x1250 mm materials :pre galvenized mild steel, material thickness:3mm.Paint .All weaather double layer powder coated paint sealed ball bearing ,steel, footrest /foot paddle for long lasting life.

Pull Chair and Push Chair ( Two in one ) 1. Dimensions (LxWxH) 1800 x 700 x 1800mm. 2. Fabricated with main post of NB 100mm (G.I) `C` Class pipe of approved make. 3. Seat main frame of NB 50 mm (G.I.) `C` Class pipe, Pipe connecting main post with handle frame of NB 65mm (G.I.) `C` Class pipe. 4. Handle frame of pipe NB 32mm and NB 25mm (G.I.) `C` Class. (NB stands for nominal bore i.e. internal diameter of pipe in millimeters. 5. All pipes are powder coated with 80-120 micron thick akzo Nobel or equivalent paints. 6. All joint of pipe are robotic welded with joints scalloped as necessary and dressed of removing sharp edges and burrs. 7. Zinc primer paints is applied at all the welding points prior to finishing. 8. Handle bars are provided with high end quality rubber grips. 9. Base plate cover made of virgin LLDPE plastic by rotational molding with minimum 4.00mm thickness UV resistant and colored. 10. Seat to be made up from virgin LLDPE manufactured by rotational molding with 4.00mm thickness, coloured, UV resistant and environment friendly. 11. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the Each NSADRate 5.00 32,400.00 162,000.00 Work Name Work Code Sub Division Estimate Amount Lumpsum Amount Total Amount Renovation and Beautification of 10 Nos Parks of Sector-9A and Chath Pooja Ghat of Ward no. 14 Zone 1 MCG GUR01220210412230 155 Gurgaon 17414401.22 0.00 17414401.22 equipment manufactured. 12. The equipment are fitted with inbuilt limiters to prevent unwanted movements. 13. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. 14. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. 15. High tensile steel with galvanized nut bolts are used for assembly. 16. Equipment made to GS mark, EN16630, DIN 79000 and ISO 14001 international standard for outdoor fitness equipment. 17. Self-explanatory stainless steel label fixed on equipment for ease of use. The rates are inclusive of all taxes like GST, transportation

Twister:- Providing, and fixing Twister of size 1700 X 1300 X 1300 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Officer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and ishapod welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Officer -in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of. equipment etc.`` `

Bridge Ladder

See Saw

Abb Trainer/Sit up Brench

Double Cross Walker

Cycle etc

Leg Press for Open Zym

Parrellar Bar for Open Zym

Push Up for Open Zyme

Bidder Name

Amount

Raj Singh Contractor(GSTN-NA)--1119318

Lajay Kumar Jangra(GSTN-NA)--1119310

Raj Singh Contractor

Raj Singh Contractor