ADDN/ALTN CUM SPECIAL REPAIRS OF OFFRS, JCOS/OR AND CIV MD ACCN UNDER GE (WEST) LUCKNOW

Amount

B/R WORK Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thickness below and above ground level, complete all as specified and directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M & L for old size brick work using fly ash brick straight or curved on plan, exc 6.0 m mean radius, built in CM (1:6) , complete all as specified and directed.

M & L for old size brick work with fly ash bricks straight or curved on plan to any radius in half brick thick walls, in CM 1:4, complete, all as specified and directed.

dismantling brick tiles or terracing tiles,mud phuska including concrete/ cement screed bed in any depth of roof complete all as specified and directed

Striping out old roof treatment (tarfelt) from roof top and removing from site complete all as specified and directed.

M&L PCC 1:2:4, type B1 using 20 mm graded stone aggregate using WPC @3% by weight of cement as in roof kerbs / benching / coving and roof padding over roof surfaces /sunken treatment etc rounded or chamfered on edges, complete, all as specified and directed. Note:- The water proofing compound measured & paid separately relevant Item.

M&L for rendering 15 mm thick in cement mortar 1:6 on fair face of brick work of walls, finished even & smooth without using extra cement, complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair face of brick work of walls, mixed with water proofing compound (ISI marked) @ 2% by weight of cement or as per manufacturer’s instructions, finished even & smooth without using extra cement complete all as specified. incl mouldings, chamfers, splay srounded or coved angles, beads,grooves and rebate upto 10 cm in width or 15 cm in girth complete, all as specified and directed.. Note : - Water proofing compound shall be measured and paid for separately.

M&L for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified and directed.

S7F in repair stainless steel 25mm dia pipe as in curtain rods including brackets with fancy end knob wall to wall and complete, all as specified and directed.

S&F stainless steel handle , 150mm size with smooth finish matching the requirement of relevent IS code as approved by GE complete all as specified and directed.

Supply only integral water proofing compound, ISI Marked.

M&L for preparation of new plastered surfaces of walls and applying two coats of of oil bound distemper over 1mm thick wall care putty and one coat of alkali resistant and including necessary scaffoldings as required etc complete all as specified and as directed.

Material and labour for complete removal of existing surface including washing / rubbing down with water of wall and applying two coats of oil bound distemper over coat of alkali resistant primer including two coat of birla wall care putty to make the surface smooth and including necessary scaffoldings as required etc complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint over a coat of water based cement primer and including necessary scaffoldings as required etc complete all as specified and as directed.

M&L for complete removal of existing teatment from old plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint over a coat of water based cement primer and including necessary scaffoldings as required etc complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of ceiling & applying three coats of white wash complete all as specified and directed.

M&L for complete removal of old decorated plastered surfaces of ceilling and applying two coat of white washing on ceilling after preperation of undecorated surface complete, all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete, all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete, all as specified and directed.

M& L for Vitrified tiles double charged 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6, complete all as specified and as directed.

All as per above item No. 27 but on vertical surfaces over and including 10mm thick rendering in CM 1:4 , complete all as specified and as directed.

M&L for ceramic joint free tiles (coloured) 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.09 sqm but not exceeding 0.18 sqm as in floors , set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6, complete all as specified and as directed.

All as per above item No-29 but on vertical surfaces including 10mm thick rendering in CM 1:4 , complete all as specified and as directed.

M&L for ceramic , joint free tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6, complete all as specified and as directed.

All as per above item No-31 but on vertical surfaces over and including 10mm thick screed plaser in CM 1:4 , complete all as specified and as directed.

M&L for glazed ceramic tiles (coloured) 300x600 x 7mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10 mm thick rendering (as screed bed) in cement & sand mortar 1:4, complete all as specified and as directed.

M&L machine cut Kota stone slab flooring 20-25mm thick over and including 15mm screed bed (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and including granite polish on Kota slab stone a complete with and including marble border (colour and width as directed) all as specified and directed.

All as per item No 34 above but on vertical surface such as dado, skirting etc over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in plinth protection surface finished fair and even without using etra cement complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3) complete all as specified and directed.

M&L Granite 18-20mm thick (of any type of minimum 2 m length of piece) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 20mm thick screed in CM 1:4 including cutting, polishing, rubbing & moulding of edges including demolition of stone slab complete, all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking plateform and other similar situation complete, all as specified and directed.

Demolition of sunken slab floor of WC and Bath including WC trap etc incl taking down loose filling of aggregate in any type and removing where direted and providing water proofing treatment of sunken slab as follows:- (a) 15mm thick rendering on vertical sides of RCC slab in CM 1:3 mixed with chemical " PIDIPROFF LW of Dr Pidilite or equivalent " as per manufacturer instructions. (b) Cleaning the concrete surface by brushing and watering and remove all surface inperfections. (c) Fixing 40mm dia Pipe 450mm long at bottom of the sunken floor and wraping of bath seal tape on the pipes inserted through walls to floor area and seal it (Bath seal tape product of Dr fixit or equivalent and grouting around the inserted pipes by pouring Dr fixit bath seal or equivalent grout as directed (d) Make angle fillets by mixing sand cement and Dr fixit pidicrete URP or equivalenont all corners. (e) Brushing neat cement slurry two coats with high performance cementitious polymer water proofing coating of Dr fixit bath seal WPC or equivalent of thickness 1mm in combination of WPC and cement (1:1.5) by vol and giving upto height 15cm from bottom slab and allow it dry completely. (f) Providing PCC 1:4:8 type D-2 using 40mm graded stone aggregate mixed with WPC as per mnufacturer instructions in sunken slab over brick bat . (g) Fill the sanitary gaps with sealing compounds complete.

Taking up or down steel water tubing and connections of 15mm bore, fixed in walls, ceiling, floors, trenches etc. complete all as specified and directed.

Taking up or down steel water tubing and connections of 20mm bore, fixed in walls, ceiling, floors, trenches etc. complete all as specified and directed.

M&L for cutting chases, pinning in, making good to facings as original where required and pointing in cement mortar 1:3 for concealed water tubing etc. and making good, cutting not exc 10 cm girth in brick walls complete all as specified and directed.

M&L for galvanized steel water tubing medium grade of 15mm bore with & including all GI fittings (ISI Marked) and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

M&L for galvanized steel water tubing medium grade of 20mm bore with & including all GI fittings (ISI Marked) and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts, seat cover , (excluding flush pipe) and 'P' or 'S' trap, including connection to trap and flushing pipe, antisyphonage pipe etc including provision of PCC (1:5:10) type E2 in filling, making good to floor, complete all as specified and directed.

S&F in repair vitrious China squatting pan orissa pattern size 580x440mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap set and to flush pipes etc and lime concrete bedding complete all as specified and directed.

S&F in repair PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle complete all as specified and directed.

S&F in repair vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified and directed.

S&F sink with drainage board made of stainless steel 1mm thick for kitchen with plugs, washers and wastes, including fixing with cast iron cantilever brackets, bedding in cement mortar on to dwarf wall, connecting union to pipe, overall minimum size 915mm x 460 mm with bowl size 410mm x 330mm x160 mm including 32mm dia waste pipe of polythelene of low or high density, 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0, complete, including taking down old unserviceable sink incl 40mm dia Waste coupling of PTMT (half or full threaded) complete all as specified and directed.

S&F sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160m including 32mm dia waste pipe of polythelene of low or high density, 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0, complete, including taking down old unserviceable sink incl 40mm dia Waste coupling of PTMT (half or full threaded) complete all as specified and directed.

S&F in repair 15mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed long body for kitchen sink complete all as specified and directed.

S & F in repair stainless steel Kitchen plate rack of overall minimum size 750 mm x 600 mm and 250 mm deep, with partitions for small/large plates etc made out of stainless steel 0.80 mm thick fixed with rawl plug and CP steel screws complete, all as directed.

S & F in repair stainless steel Kitchen plate rack of overall minimum size 750 mm x 900 mm and 250 mm deep, with partitions for small/large plates etc made out of stainless steel 0.80 mm thick fixed with rawl plug and CP steel screws complete all as specified and directed.

S&F in repair CP Brass square gratings 125mm dia with waste hole (Minimium weight 40 grams) complete all as specified and directed.

S&F in repairCP brass grating 125mm dia without waste hole (Minimium weight 40 grams) complete all as specified and directed.

S&F in repair PVC connection 450 mm long suitable for 15 mm bore GI pipe including CP brass nuts on both sides, complete all as specified and directed.

S&F in repair long body 15mm bore fancy type bib tap of min weight 0.575 kg, cast copper alloy, chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified & directed.

S&F in repair cp angle valve fancy type of min weight 0.575 kg, long body for 15 mm bore pipe with capstan head long screwed shank including cp cover plate fancy type complete all as specified and directed.

S&F in repair 15 mm bore single lever basin mixer central hole for WHB system with 450 mm long braided hoses complete all as specified and directed.

S & F in repair single lever brass CP wall mixer 3-in-1 system with provision for over head shower with 115 mm long bend pipe, connecting legs and wall flange (without overhead shower) shower for iron pipe of 15 mm bore GI pipe complete all as specified and directed.

S&F in repair hand shower (Health faucet) with 1 Mtr flexible tube with wall hook bracket etc, complete set of superior quality complete all as specified and directed.

S&F in repair toilet paper holder CP fixed complete all as specified and directed .

S&F in repair glass corner self assembly, fancy type, made of 6 to 7mm thick sheet toughened glass of size 250x250mm, fixed with CP brackets, complete, all as specified and directed. Make: Jaquar range OR equivalent

Supply & fix in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repair CP brass tubular towel rail, 20mm dia, ‘D’ type, 60cm long between flanges, fixed to PVC rawl plugs with chromium plated brass screws, ccomplete all as specified and directed.

S&F in repair 40mm bore PVC low density (LDPE) pipe of pressure 6kg/Cm2 fixed to wall or laid in floor, ccomplete all as specified and directed.

S&F in repair brass chromium plated shower rose 125 mm size without swivel joint including fixing to steel pipe of 15mm bore or union complete all as specified and directed.

S&F in repair PVC (SWR) 125 mm bore floor/nahani trap including jointing with solvent cement complete all as specified and directed.

Disconnecting existing tanks, exc 250 Ltr & n.exc 500 Ltr setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position.(Cleaning repairing, etc. measured separately) complete all as specified & as directed.

Dismantling PVC water tanks and removing for capacity exceeding 250 litres & not exceeding 500 litres etc., all as directed.

S&F rotational moulded polyethylene water storage tank of capacity 500 Litre, three layer construction, white colour, ISI mark (cylindrical vertical with closed top) hoisted and fixed in position with and including 20 mm dia GI pipe medium grade washout pipe 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe 600 mm long with fittings complete all as specified and as directed.

Dismantling PVC water tanks and removing for capacity exceeding 500 litres & not exceeding 1000 litres etc., complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tank of capacity 1000 Litre, three layer construction, white colour, ISI mark (cylindrical vertical with closed top) hoisted and fixed in position with and including 20 mm dia GI pipe medium grade washout pipe 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe 600 mm long with fittings complete all as specified and as directed.

S&F 20 mm ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe, complete all as specified and directed.

S&F in repair gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of 20 mm bore complete all as specified and directed.

Supply & Fixing in repair gun metal gate valve screwed both ends to15mm bore pipe complete all as specified and directed.

S&F in repair PVC coated 25mm dia anodize aluminium alloy pipe as in curtain rods including brackets ,wall to wall and fancy type end knobs, complete, complete all as specified and directed.

Demolition and breaking up or taking down PVC/AC/CI/SSW 100mm/75mm bore pipe drain pipes, set in cement mortar including PCC haunching and bedding, complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including PVC holding clamps, complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including PVC holding clamps, complete all as specified and directed.

S&F 110mm bore PVC (SWR) bend, any radius complete all as specified and directed.

S&F 75mm bore PVC (SWR) bend, any radius with access door. complete all as specified and directed.

S&F 75mm bore PVC (SWR) bend, any radius complete all as specified and directed.

S&F 110mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F PVC(SWR) 110mm dia branch piece, single(single Y) equal or enequal with access door complete all as specified and directed.

S&F PVC(SWR) 75mm dia branch piece, single(single Y) equal or enequal with access door complete all as specified and directed.

M&L PVC(SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) and area exc 1.5 sqm but n.exc 4 sqm each, complete all as specified and directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) and area not exc 1.5 sqm each, complete all as specified and directed.

Taking down shutters of any description exc 2 Sqm and refixing in same opening complete all as specified and directed.

M&L plain cement concrete cast in situ 1:3:6 type C1 using 20 mm graded stone aggregate as in copings ,hold fast,back filling of pressed steel frame and other similar work water troughs and the like including weathering, slightly rounded or chamfered angles and throating etc including form work complete all as specified and directed.

S&F pressed steel frame for door with one or more rebates size 125x60mm including necessary fixing lugs, lock striking plates,hinges,hold fast etc. complete size /profile of frame as per IS complete all as specified and directed.

S&F pressed steel frame for door with one or more rebates size 105x60mm including necessary fixing lugs, lock striking plates,hinges,hold fast ,etc. complete size /profile of frame as per IS complete all as specified and directed.

M&L 35mm thick factory made door shutter plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. Note:-Shutter shall be manufactured as per TD No LZ/C-TD/125 sheet No 1/3 to 3/3

Supply and fixing factory made 35mm thick glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (with sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 (a) of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat, complete all as specified & directed. Note:-Shutter shall be manufactured as per TD No LZ/C-TD/125 sheet No 1/3 to 3/3

S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and directed. (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

S&F Factory made soild PVC profiled panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as infill, with 'C type Gl or 40 x 20 x19 of MS pipe as stiffner complete all as specified and directed.

S&F butt hinges of size 100 mm medium weight, stainless steel ISI marked ccomplete all as specified and directed.

S&F aluminium handle fancy type, 150mm size, cast type, anodized (ISI marked) complete all as specified and directed.

S&F 200 mm long aluminium anodized barrel tower bolts fancy type of extruded section (ISI marked) complete all as specified and directed.

&F 300 mm aluminium alloy, anodised, sliding door bolt fancy type with hasp, staple (bolt type) and fixing clips of sheets, cast or extracted sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.

S&F mild steel helical door spring 300mm ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed.

S&F 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F Eye door viewer (Magic Eye) of suitable size fixed with panneled door shutter complete all as specified and directed.

S&F in repair 300mm long stainless steel six peg hanger of minimum weight 150gms chromium plated as approved by engr-in-charge complete all as specified and directed.

S&F mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 including welding work complete all as specified & as directed. Note:Design and pattern of window Grills as decided by GE at site.

S&F stainless steel grade 304 Framed work such as staircase raling etc.. with ends of bars shouldered and/or riveted, or forged into spikes walk ways; railings including welding work complete all as specified & directed. Note:-Railing shall be manufactured as per TD No LZ/C-TD/109 sheet No 1/1

S&F 3mm thick figured glass pin head type and glazing with oil putty in square not exc 0.5 sqm in each pane, complete all as specified and directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire, staples complete all as specified and directed.

All per item No 110 above but fixed in repairs.

M&L for preparation of new surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new surfaces of steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of red oxide complete all as specified and directed.

M&L for preparation of old painted surfaces of wood and wood based material of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint complete all as specified and directed.

M&L for preparation of old painted steel and iron surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint complete all as specified and directed.

S&F magnetic catcher with strike plate of brass body for cup board shutters complete all as specified and directed.

S & F auto concealed hinges SS size 103mmx64mmx28mm suitable for cabinet and wardrobe complete all as specified and directed.

S & F stainless steel security latches of suitable size with security chain and fixed to inside door with security bolt complete all as specified and directed.

Demolition of reinforced cement concrete in floors ,beams ,chajjas,landing slab in any position or height and similar suspended works complete all as specified and directed.

M/L RCC 1:11/2:3 type B1 (using 20 mm graded aggrigate) as in slab, chajjas, beam etc complete all as specified and directed.

Use and waste of Form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work n.exc 200mm thick complete all as specified and directed.

M&L 10mm dia and over TMT bars, cut to length, bent ot shape required, including cranking, bending , hooking ends and binding with and including mild steel wire(annealed not less than 0.9mm dia) icluding welding,rivetting etc complete all as specified and directed.

Repairing of RCC projections chajjas, roofs, facia etc by necessary preparation, scrapping, cutting, chiseling, derusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC and providing cement concrete (1:1.5:3) using 12.5 mm graded crushed stone aggregate including necessary form work and reinforced with chicken wire mesh and rendering in cement mortar 1:3 using coarse sand in patches area not exceeding 5 sqm each and thickness of RCC member not exceeding 70mm including applying two coats of finishes as provided to the existing surfaces to match with the existing surfaces in at any height complete all as specified and directed.

M&L providing and injecting chemical emulsion Post Constructional Antitermite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear meter including drilling and plugging holes etc. in apron complete all as specified and directed.

M&L treating of soil under existing floors using emulsion Post ConstructionalAntitermite Treatment @ one litre per hole,300mm apart including drilling and plugging 12mm dia holes with cement morter 1:2 (1 cement :2 coarse sand) to match the existing floor.

M &L Cutting holes into or through brick walls built in cement mortor or cement lime mortar and stone walls and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required of size 400sqcm but not exceeding 0.1 sqm for fixing of exhaust fan etc complete all as specified and directed.

S & F Plain mild steel wire 4mm dia, galvanised class 3,in cloth hanger including straining and fixing to wood, concrete or steel posts and/or to straining bolts, including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins, etc.complete all as specified and directed. (Note : Each line of wire to be measured)

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

Dismantling manglore pattern roofing tiles with ceiling tiles or slate roofing complete all as specified and directed.

M & L Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour approved by GE having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified & directed.

M & L Prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour approved by GE having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified & directed.

S&F in repair 'E' board 600x600x4mm thick white prelaminated sett embosed reinforced designer ceiling board tiles of approved texture at all height laid on hot dipped galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be poweder coated white. The frame work shall comprise of main runner made from 0.33 mm thick GS sheet and of size 24x32x300mm and at 1200mm centers securely fixed to be structural soffts by approved hangers at 1200 mm maximum centrers. Hangers of GI wire 4mm dia to be fixed by approved rawl plug level and justers and screws etc. The last hanger at the end of each main runner shall not be grater than 450mm from adjacent wall, Flush fitting of 1200mm long cross tee (with double stiching) to be interlocked between main runners at 600mm center to from 1200x600mm modules cross tee longer than 600mm to be supported independtly. 600x600mm dodules to be formed by fitting 600mm long cross tee centrally between the 1200mm cross tee. Tee, perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture insturction and as specified and directed.

M&L 2nd class HW Plain fillets. square, rectangular or triangular in section, clean sawn, se-cured with screws or brads. Exc 13& nexc 25 sqcm complete all as specified and directed.

M&L for in repair plywood , 18/19mm thick, grade 1 quality, exterior grade, commercial type, fixed with screws to timber frame work ccomplete all as specified and directed.

S & F 0.9 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructionas complete all as specified and directed.

Dismantling wrought iron mild steel wk of any description not otherwise provided for etc complete all as specified and directed.

Fixing only Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc including all necessary MS plates nut bolts etc complete all as specified and directed.

M & L Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe-410-W(Gde-E-250) quality-B including all necessary MS plates nut bolts etc complete all as specified and directed.

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

S&F 1.00 MM thick Mild steel, plain black sheet in wall cladding,steel gates and similar work, cut to size, holes punched; including round headed screws,clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred as in garage gates and ventilators chhaja's complete all as specified and directed.

Material and labour for complete removal of existing surface including washing / rubbing down with water of wall and applying two coats of oil bound distemper/emulsion over coat of alkali resistant primer and including necessary scaffoldings as required etc complete all as specified and as directed .(Make:- Interior grade acrylic emulsion shall be of the make: Asian paints' 'Premium Emulsion'', Nerolac paints ''Beauty Gold acrylic Emulsion, ICI Dulux ''Super smooth acrylic Emulsion, Berger '' Rangoli acrylic Emulsion / Equivalent)

Mild steel TMT bars 08 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F IInd class HW plain,solid,straight chowkhats and framed wrought,framed rebated,on the solid rounded or completed but together with gue pinned complete all as specified & directed.

Extra over rendering/plastering for work in isolated widths or in widths not forming part of general plastering such as in bands,sunk pannels,cornices,skirtings,drip moulds and simillar work n.exc 15 CM in width or girth,including cutting to edges all mitres and stopped ends etc complete all as specified and directed.

Supply and fixed in repair stop valves, 15mm dia, cast copper alloy,CP fancy type with long shank and cup(concealed type) screwd down,high pressure with crutch or butter fly handle,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

S & F in repair CP pillar tap cast copper alloy of min weight 656 gms , with capstan heads, chromium plated, screwed down, high pressure fancy type with long shanks and fly nuts, screwed for iron pipe 15mm bore complete all as specified and directed.

S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in a square n exc 0.5 Sq m in each pane complete all as specified and directed.

M&L for 1mm thick of wall care putty over wall/ceiling surfaces etc complete all as specified and directed.

M&L for bond stone of squared rubble regular coursed, well bonded, bedded and solidly hearted built in CM 1:4 etc complete all as specified and directed.

S&F PVC cabinet shutter as in Kitchen, Cup board, wardrobe etc with suitable frame including shelves in required sizes at site made out of 18 mm thick one side decorative lamination & other side balancing lamination sheet & provision of shutter made out of 18 mm thick one side decorative laminated PVC sheet all required brackets stainless steel screw etc the panels shell be fabricated using adhesive and screws where ever required. All the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bend finish including all necessary fitting as per site requirement and as per make and specification mentioned complete all as specified and directed. Note:- Density of PVC solid sheet should not be less than 575 kg/M3

&F Box type steel windows/ventilators with side hung shutters with glazed and glazed double panel shutters both provision including box type hinges or factory made butt hinges with steel handle, tower bolts hold fasts and steel peg stays etc. complete with glazing bars dovetailed or welded and including 10 mm dia square bars @ 125 mm c/c complete all as per as per TD Drg No LZ/C-TD/130 Sheet No 1/4 to 4/4. Note: No extra payment in variation of section will be made for section profiles of higher sizes.

Powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

Powder coated (Minimum thickness of powder coating 50 micron) anodised aluminium ventilators shutter side hung type without sash bars, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing anodised aluminium snap beading, screws, anodised aluminium fitting such as peg stays 150 mm long (1 No) hinges type B- 21100 mm long (2 No) suitable handle (1 No) complete all as specified and directed. No extra payment in variation of section will be made for section profiles of higher sizes

S&F 25mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) finishing cement concrete surface even and smooth without using extra cement as in floor complete all as specified and directed.

Demolition of stone slab and tiles of any description or thickness in floors, apron, etc laid bedded and pointed in any mortor etc complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair face of brick work or concrete surfaces of walls, finished even & smooth without using extra cement including mouldings, chamfers, splay srounded or coved angles, beads complete all as specified and directed.

M&L Hard core of Broken stone Boulders of gauge n.exc 63mm deposited spread & levelled in layers n exc 15cm watered and rammed to a true surface thickness complete all as specified and directed.

M&L plain cement concrete type D2 1:4:8 (using 40mm graded stone aggregate)as in sub base /mass concrete complete all as spciified and directed.

M&L for Machine pressed precast concrete interlocking paver block rubber moulded any shape and size conforming to IS 15658-2006 of 60mm thickness,M-35 grade of approved design /colour set and bedded over sand cushion all as specified and directed. Note : Sand Cushion shall be measured and paid seperately

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.

Removing excavated material (Soils) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M&L 50 mm thick sand cushion and joint filled with fine sand including leveling tamping & sweeping etc all as specified & directed.

M & L for Plain Cement concrete Type B1 1:2:4 (20 mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

M & L for Plain Cement concrete Type C1 1:3:6 (20 mm graded stone aggregate) as in surface channels and drains complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified and directed.

Add or deduct for each 25 mm girth or part thereof over or under 30cm for forming fair finish drain or channel in cement concrete using extra cement including forms, moulds, mitred, stopped ends, complete all as specified and directed.

M & L for Providing precast cement concrete ( 1:2:4) Type B1 ( using 20 mm graded stone aggregate) as cover slabs (for man holes etc.) set in CM 1:4 and similar articles with plain faces complete all as specified and directed

S&F Reinforced concrete pipes 300 mm dia, class NP2, laid and jointed complete with collars complete all as specified and directed.

Demolition and breaking up drain pipe of any description up to 150mm dia in set CM 1:4 including demolition of cement concrete bedding and hunching complete all as specified and directed.

Demolition and breaking up drain pipe of any description exc 150mm dia and up to 200mm dia set in CM 1:4 including demolition of cement concrete bedding and hunching complete all as specified and directed.

Demolition of RCC of any description and in any position not other wise specially provided for reinforcement cut as required to facilitate demolition complete all as specified and directed.

Excavation in trenches exc 1.5 m wide and depth exc 1.5m but n.exc 3 m for foundation and getting out in soft/loose soil complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in concrete bed to drain pipe including packing under, and haunching against the sides of pipes after they are laid and tested for 150mm dia pipe complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in concrete bed to drain pipe including packing under, and hunching against the sides of pipes after they are laid and tested for 200mm dia pipe complete all as specified and directed.

M&L for 150mm bore PVC pipe type‘B’ matching the requirement of IS 13592, laid in trenches and jointed with sealent and testing of lines etc complete all as specified and directed.

All as per item No 178 above but 200mm bore pipe.

Cutting in to existing manholes for connecting new drains, making good to pipe & rendering , cutting out existing benching for and forming branch channel in cement concrete1:2:4 type B-1 smooth finished and reforming benching as required for 150 mm bore drain pipe complete all as specified and directed.

M&L for salt glazed stone ware gully traps size 150 x 150mm, square, type ‘P’ including setting and jointing to drains with CM 1:1 and CI grating including demolition of existing traps complete all as specified and directed.

S&F reinforced concrete pipes, class NP-2, laid and jointed complete with collars of 200mm dia as in repair complete all as specified and directed.

Cutting of bituminous road to the width and depth required for laying SWG pipe or sewage line including hacking, benching and including making good to top surface of road with bitumen & aggregate as per road specification complete and as directed.

M&L brick work with fly ash brick straight or curved on plan exc 6 m mean radius built in CM 1:4 complete all as specified and directed.

M&L for cement concrete 1:2:4, type B-1, using 20mm graded stone aggregate as in benching, surface channel and similar articles finishing even and smooth using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on brick or concrete surface, finishing even and smooth using extra cement complete all as specified and directed.

S&F Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 2.4m dia and 4.5m effective depth complete all as shown in TD drg No TD 576 sheet 1/2 and 2/2 and TD 217 sheet 1/2 and 2/2 , specified and directed.

All as per item no. 187 above of Soakage well (4.5m effective depth) but depth exceeding beyond 4.50m and upto 6.00 m complete all as directed and specified. Note:- The tenderer shall quote rates for per meter of depth beyond 4.50m and upto 6.00m. Actual payment shall be made based on actual depth provided at site for one meter depth or part thereof . Tenderer should note this aspect while quoting rates against this item.

All as per item no. 187 above of Soakage well (4.5m effective depth) but depth exceeding beyond 6.00m and upto 7.50 m complete all as directed and specified. Note:- The tenderer shall quote rates for per meter of depth beyond 6.00m and upto 7.50m. Actual payment shall be made based on actual depth provided at site for one meter depth or part thereof . Tenderer should note this aspect while quoting rates against this item.

S&F RCC Septic tank designed to carry sewage and sullage water, for 100 users excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design Mix in Walls , Base Slab , Baffle walls and Roof Slab including beams etc with Vent shaft , manhole openings with cover connection etc., complete with effective depth of 1.5 meter and overall depth of 3 meter complete all as shown in TD drg No TD 576 sheet 1/2 and 2/2 and TD 217 sheet 1/2 and 2/2 , specified and directed.

All as per item no. 190 above of Septic tank (3.00m overall depth) but overall depth exceeding beyond 3.00m and upto 4.50 m complete all as directed and specified. Note:- The tenderer shall quote rates for per meter of depth beyond 3.00m and upto4.50m. Actual payment shall be made based on actual depth provided at site for one meter depth or part thereof . Tenderer should note this aspect while quoting rates against this item.

All as per item no. 190 above of Septic tank (3.00m overall depth) but overall depth exceeding beyond 4.50m and upto 6.00 m complete all as directed and specified. Note:- The tenderer shall quote rates for per meter of depth beyond 4.50m and upto 6.00m. Actual payment shall be made based on actual depth provided at site for one meter depth or part thereof . Tenderer should note this aspect while quoting rates against this item.

INTERNAL ELECTRIC WORK Taking down copper / aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or taking credit and making good the disturbed surfaces of walls, floors, etc. complete all as specified and directed.

Taking down DBs any type and size including MCBs removing materials to store for keeping in safe custody or taking credit and making good the disturbed surfaces of walls, floors, etc. complete all as specified and directed.

Material and labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLSH copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of sunken box for modular switches/sockets, regulators etc and making good to the disturbed surfaces to match with the existing finishes complete all as specified and directed for one light / fan point controlled by one switch complete all as specified and as directed.

All as per srl item No 195 above but one bell / buzzer point controlled by one bell push button on the same board with other switches or independent with cable 1.5 Sq mm size.

All as per srl item No 195 above but one light point controlled by two, two way switches with cable 1.5 Sq mm size.

All as per srl item No195 above but one 3 pin socket outlet, 05 Amps, independent with cable 1.5 Sq mm size.

All as per srl item No 195 above but one 3 pin socket outlet 05 Apms point on the same board with other switches with cable 1.5 Sq mm size.

All as per Serial item No 195 above but one 3 pin socket outlet, 15 Amps, independent with cable 2.5 Sq mm size.

Supply and fixing Modular switch 1 way 6A, 1 module complete all as specified & directed.

Supply and fixing Modular Bell push 6A 1 module complete all as specified & directed.

Supply and fixing Modular switch 1 way 16A, 1 module complete all as specified & directed.

Supply and fixing Modular switch 2 way 6A, 1 module complete all as specified & directed.

Supply and fixing modular Socket, 6A - 2/3 pin combined 2 module complete all as specified & directed.

S&F modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified & directed.

Supply and fixing Fan step regulator, 120W - 2 module (Modular) complete all as specified & directed.

Supply and fixing white cover plate with frame modular type of 03 module complete all as specified & directed.

Supply and fixing white cover plate with frame modular type of 04 module complete all as specified & directed.

Supply and fixing white cover plate with frame modular type of 06 module complete all as specified & directed.

Supply and fixing white cover plate with frame modular type of 08 module complete all as specified & directed.

Material and labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLSH copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of sunk zinc coated pressed steel terminal box of 1.60mm thick with 3mm thickness, plastic laminated sheet top cover, brass screws, cup washers etc and making good to the disturbed surfaces to match the existing complete all as specified and directed for one light / fan point controlled by one switch complete all as specified and as directed.

All as per srl item No 212 above but one bell / buzzer point controlled by one bell push button on the same board with other switches or independent with cable 1.5 Sq mm size complete all as specified and as directed.

All as per srl item No 212 above but one light point controlled by two, two way switches with cable 1.5 Sq mm size.

All as per srl item No 212 above but one 3 pin socket outlet, 05 Amps, independent with cable 1.5 Sq mm size.

All as per srl item No 212 above but one 3 pin socket outlet 05 Apms point on the same board with other switches with cable 1.5 Sq mm size.

All as per Serial item No 212 above but one 3 pin socket outlet, 15 Amps, independent with cable 2.5 Sq mm size.

Supply and fixing switch piano flush type, single pole, one way, 05 Amps complete all as specified & directed.

Supply and fixing bell push, flush type, 05 Amps complete all as specified & directed.

Supply and fixing switch piano flush type, single pole, two way, 05 Amps complete all as specified & directed.

Supply and fixing switch piano flush type, single pole, one way, 15 Amps complete all as specified & directed.

Supply and fixing socket outlet 2 in 1, 5 pin, 05 Amps complete all as specified & directed.

Supply and fixing socket outlet 2 in 1, 3 pin, 05/15 Amps complete all as specified & directed.

Supply and fixing stepped type, electronic fan regulator, flush and socket type on the existing phenolic laminated sheet etc as required complete all as specified & directed.

Supply and fixing bell, AC, 230 volts, single pole complete all as specified & directed.

S&F angle type holder insulated body with back plate suitable for batten fittings as complete all as specified & directed.

Supply & fixing bulk head light fitting made from cast aluminium body with heat resistance pressure die cast housing, IP-65 protection cover suitable for bulk head fitting integrated type 6.5 W LED, 6000K , 105 lumens/watt including inbuilt electronic driver complete all as specified and as directed.

Supply and Fixing wall/surface mounting luminaires integrated LED Batten 20 W, 6000 K,100 lumens/watt , 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements complete all as specified and as directed.

S&F in repair LED Building security light 35/40 Watt with high power LED source (>110lumen/watt) PDC housing, IP65 and IK 07 with 4 KV inbuilt surge protection potted driver including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories such as bracket of GI pipe light grade 40 mm dia 0.60 mtr long bend to shape as per suitable size along with all accessories, fixed on wall including bolts & nuts complete all as specified and as directed.

Supply and fix ceiling rose, 3 terminals, polycarbonate body complete all as specified & directed.

Supply and fix sheet metal enclosure distribution board, single pole and neutral, AC, 240 volts, 08 way with 200 Amps rated bus bar and double door protection grade IP 43 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar confirming to IS 13032 & 8623 complete all as specified and directed.

Supply and fixing of MCB with MCB SP, 06 to 32 Amps 240 volts, 'C' Series, ISI marked and conforming to IS 8828/IEC 60898-1 including making connections with copper lugs, testing as required complete all as specified and directed.

Supply and fixing of MCB SPN, 32 Amps 240 volts, 'C' Series, ISI marked and conforming to IS 8828/IEC 60898-1 including making connections with copper lugs, testing as required complete all as specified and directed.

Taking down fan, sealing cable end, dismantling blades and removing fan and blades to sore including painting of ceiling fans complete, in situ with synthetic enamel paint by one coat spraying after cleaning all dust etc including filling cavities with filler and hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified & directed.

S&F of exhaust fan single phase metal body, 230/240 Volt heavy duty of size 300 mm sweep 1400 RPM including suitable louvers and making connection with twisted copper flexible wire 23/0.076mm complete all as specified and directed.

Supply and fix sheet metal enclosure distribution board, single pole and neutral, AC, 240 volts, 12 way with 200 Amps rated bus bar and double door protection grade IP 43 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar confirming to IS 13032 & 8623 complete all as specified and directed.

Supply and fixing wall/surface mounting luminaires (Mirror Light) integrated LED Batten( 2 feet) 10/12 W, 6500 K, 230V ,100 lumens/watt,with extruded aluminium housing & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements complete all as specified and directed.

Taking down ceiling/exhaust fan and depositing in MES store yard complete all as specified and directed.

S& F Decorative wall light fixture made up of Metal base, synthetic white in colour and square/round metal base with bend pipe and glass globe with nickel finish, ( B-22/E27 base), with 01 No. 7/9 W LED Bulb, 230 V, 6000K, complete incl all required electrical connecting arrangements all as specified and as directed. Make Phillips Model Grace or Jaquar lighting Cat part No JNL-NKL-WLBPGG001E27/ Havells decorative model Floretine WL 1LS B22 SS Cat part No LHFOAJE1TZ1I060

Supply & fix exhaust fans, plastic body, AC, single phase, 230/240 V of size 200 mm sweep with louver complete all as specified and directed.

S & F water heater storage type electric BEE five star rated of capacity 25 ltrs to operate on 230 volt AC, vertical type including 4 Nos full threaded fastener of size 100x10 mm with, 2 No washer, water connection with 02 Nos PVC flexible pipe of size 15 mm, 450 mm lenght & suitable plug top of 16 Amp capacity complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Supply & fix modular type AC power unit with a two pin and earth plug and socket complete with one single pole MCB 20 A complete all as specified & directed.

Supply & fix wall fan, 300 mm sweep, AC, single phase, 230/240 V, 1400 RPM complete all as specified and directed.

M&L for Cutting, opening circular/Rectangular in shape hole on wall for fixing of exhaust fan of size 300/200 mm sweep incl plastering and making good the disturbed surface surrounding complete all as specified and directed.

Supply only LED bulb 7/9 watt complete all as specified and directed.

Supply and fix modular type blanking plates, one module complete all as specified and directed.

M & L for taking down water heater of any size and refixing the same in its original or new location as directed including disconnecting of electric supply, water supply and replacement of 2/4 Nos full threaded fastener of size 100x10 mm with 02 Nos washer, water connection PVC hose pipe of size 15 mm, 450/600mm length & suitable plug top of 20 A complete all as specified & directed.

S&F in repairs double door VTPN 4 way double door suitable for 4 pole MCCB 63-100A, 415 V as incoming & SP/TP MCB as outgoing 200 Amps rated Busbar, inter connection link, cable ties, earth bar etc incl necessary civil works and electrical connections with suitable lugs/spreader links complete all as specified and directed . ( Note: MCCB & MCB to be measured and paid separately)

S&F MCCB 63-100 Amps 415 volts, 4 pole 16 KA breaking capacity complete all as specified and directed.

M & Labour for taking down and refixing in its original or new location as directed including disconnecting of electric supply and taking down VTPN DB 4 way double door, MCCB, MCBs to be kept in store safely for reuse including necessary civil work and cleaning all dust etc from surface of VTPN DB and refixing VTPN DB and providing electrical connection including provision of cable lugs complete all as specified & directed

Taking down electric meter and refixing the same in its original or new location as directed, fixed on new board and providing electrical connection including provision of cable lugs complete all as specified & directed

EXTERNAL ELECTRIC WORK Supply, installation , testing and commissioning floor mounted on platform transformer of capacity 500 KVA step down out door type 3 phase, 50 Hz, AC, oil immersed, air naturally cooled (ONAN Type), with external cooling tubes / radiators, double wound core type copper wound having no load voltage ratio 11 KV / 433 Volt corresponding to principal tapping, delta connected primary side (HV side) and star connected on secondary side (LV side) in accordance with vector symbol DYN 11 (Vector group – 4) with neutral brought out on LV side and having tapping on HV side for constant out put so as to alter vary secondary voltage from + 2.5 % to - 7.5 % in steps of 2.5% by means of manual OFF LOAD taps changing arrangements complete and conforming to IS : 1180 level II as per details mentioned in Annexure - A to BOQ. NOTE :- (i) Annexure- A to BOQ has been uploaded separately alongwith tender documents and is part of BOQ for all purposes. (ii) Drawing should be approved by GE before placing the order.

Supplying, laying, jointing, testing and commissioning HT under ground electric power cable Crossed linked polyethylene ( XLPE) insulated, screened PVC bedded, galvanised steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor, 11000 Volts grade suitable for earth system of 3 core 95 Sq mm cross sectional area size, ISI marked as per IS 7098 Part-2, laid in trenches/ laid under floor/ laid in ducts or fixed on poles etc including connecting both end with proper size of aluminium lugs duly crimped with die press crimping device and cable gland complete all as specified and directed. Note :- Excavation/ boring of raod/ pipe shall be measured and paid separately under appropriate items.

Supplying and laying or fixing, jointing and testing LT under ground electric power cable crossed linked polyethylene ( XLPE) insulated, galvanised steel strip armoured, ISI-7098 Marked, with aluminium conductor multi stranded, heavy duty 1100 Volts grade of size 400 sqmm cross sectional area, 3.5 core complete all as specified laid in trenches/ laid under floor or fixed naked with walls/ on poles/ in ducts /in GI pipes etc. with and including MS clamps, nuts , bolts, washers, including connecting both end with proper size of aluminium lugs duly crimped with die press crimping device and cable gland complete all as specified and directed. Note :- Excavation, earth work, sand cushioning, protection bricks/ tiles/ block and pipe shall be measured and paid separately under appropriate items.

All as per item Srl No- 257 but size 240 sq mm 3.5 core

All as per item Srl No- 257 but size 185 sq mm 3.5 core

All as per item Srl No-257 but size 50 sq mm 3.5 core

All as per item Srl No- 257 but size 35 sq mm 4 core

All as per item Srl No-257 but size 16 sq mm 4 core

All as per item Srl No- 257 but size 10sq mm 4 core

Material and labour for river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading and levelling complete all as specified & directed. Note : Punned thickness shall be measured and paid.

M&L laying well burnt old size bricks, sub class "B" bricks, straight or curved on plan , laid flat with width equal to length of brick, laid dry over electric cable for protection complete all as specified & directed.

M&L horizontal boring and inserting GI Pipe 40-100mm bore along existing road ( maximum 10 M in width) and under pavements/ hard standing/ railway/ road /canals /streams crossing in all types of soil at prescribed depth (in no case the depth of boring be less than 1.0 m from the road surface) up to 200 meters of drilling longitudinal complete all as specified and directed. Note : if any damages to existing services such as OFC/gas pipe line/electric cable etc shall be repaired immediatelly by the contactor. Rate quoted above deemed to be included.

S& Fixing Mild steel galvanized tubes light grade ISI marked 40mm bore laid in trenches / road crossing/ fixed to pole /walls/path/drain/floor etc all as specified and as directed.

All as per item Srl No-267 ditto but 50 mm size complete

All as per item Srl No-267 ditto but 80 mm size complete

Plain cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregates, as copping of poles complete all as specified and as directed .

Dismantling the steel poles/strut any size incl pcc foundation etc complete all as specified and as directed.

Supply and errection in of 07 mtr continuously tapered hot dip galvanised Octagonal cross sectional pole with single dipping method having bottom 130 mm A/F and top 70 mm A/F 3 mm thick confirming to ASTM A 572 Gr with yield 450 mpa cut and folded to form an octagonal section and welded in accordance with AWS for wind loading as per IS 875 part 3 1987.Poles shall be provided with base plate of size 225x225x12 mm which shall be free from any lamination or incursion with no cutting or welding on the pole after hot dip galvanising with single arm 1000 mm long bracket tilted to 150 degree from horizontal toward vertices suitable for mounting on the octagonal pole, of company recommendation and one no TPN Connecton 3 phase 4 wire 100 Amps, and one number MCB SP 6 Amps, Cat NO: HM-1107 P for pole and HM-SA 1 M for bracket. A triangular flat MS plat of 6mm thick duly coated with GI shall be welded between cap of the octagonal pole and bracket. Welding work shall be done 250mm on bracket and 150 mm on pole's cap including all RCC work type (1:2:4) type B-1 as per pole manufacturer's drawing and earth work all as per requirement complete all as specified and directed.

Supply and fixing in replacement of LED street light fitting with mandatory driver set having pressure die cast aluminium body and lenses suitable for 45 watt confirming to IP 66 and IK 07 protection having company LOGO ingraved complete lumes high power LED with lenses Lumen efficacy of LED not less than 100 lumen per watt system,efficency power factor >0.95, THD<10% at Full load CRI> 70%, every life class 50000 hrs at the L70,poted driver set suitable for pole mounting bracket 40 mm complete all as specified & directed.

S&F in repair flat twin core ,10 sqmm nominal cross sectional area multistranded aluminium conductor cable, over all PVC sheathed, 1100 Volts grade heavy duty cable complete all as specified and directed.

All as per item No 274 but 4.0 sqmm twin core.

All as per item No 274 but 6.0 sqmm twin core.

Disconnecting the existing cable from Panel / Pole, preparing the end for jointing with and including all earth work, Supply and fixing Cable end termination including sleeves heat shrinkable joint suitable for LT XLPE cable of size 3.5 core 16 to 50 sq mm complete all as specified and directed.

All as per item No 277 but size 70 to 185 sq mm

All as per item No 277 but size 185 to 240 sq mm

Supply and fix cable jointing kit for 11 KV grade cable for outdoor termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE, armoured, Aluminium conductor cable of size 95 sqmm complete all as specified and directed.

Supply and fix cable jointing kit for 11 KV grade cable for indoor termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE, armoured, Aluminium conductor cable of size 95 sqmm complete all as specified and directed.

Supply and fixing Cable root indicator made out of PCC block (1:3:6) type C-1 using 20 mm graded stone aggregated of size 900 mm x 300 mm x 100 mm thick ( 45 cm burried in ground) and properly painted as per approved colour with DANGER / 1.1 KV CABLE MES embossed on rout marker with and including excavation and earth work complete all as specified and directed.

Supply, testing and commissioning weather and vermin proof LT feeder pillar box (Panel board) factory fabricated out door cubical/kiosk type totally enclosed made out of 3.15 mm thick MS sheet and inner shell made out of 2 mm thick MS sheet metal enclosure of as per 15:5039/1983 partially tested at CPRI approved factory fabricated having modern fabrication and testing process which includes seven tank pretreatment process including PCC 1:2:4 type B-1 platform 40 cm above the ground level and 45 cm below the ground level with Aluminium bus bar 1500 Amp & angle iron frame of M.S. angle 50x50x6mm suitable for operation on 3 phase 4 wire, 440 volts 50 HZ system as per complete details mentioned in Annexure - B to BOQ. NOTE :- (i) Annexure- B to BOQ has been uploaded separately alongwith tender documents and is part of BOQ for all purposes. (ii) Drawing should be approved by GE before placing the order.

All as per item 283 but with 600 Amps aluminium bus bar as per complete details mentioned in Annexure - C to BOQ. NOTE :- (i) Annexure- C to BOQ has been uploaded separately alongwith tender documents and is part of BOQ for all purposes. (ii) Drawing should be approved by GE before placing the order.

All as per item 283 but with 600 Amps aluminium bus bar as per complete details mentioned in Annexure - D to BOQ. NOTE :- (i) Annexure- D to BOQ has been uploaded separately alongwith tender documents and is part of BOQ for all purposes. (ii) Drawing should be approved by GE before placing the order.

All as per item 283 but with 600 Amps aluminium bus bar as per complete details mentioned in Annexure - E to BOQ. NOTE :- (i) Annexure- E to BOQ has been uploaded separately alongwith tender documents and is part of BOQ for all purposes. (ii) Drawing should be approved by GE before placing the order.

Supply, installation, testing and commissioning out door type busbar panel board made out of 3.15 mm thick MS sheet and MS angle section 40x40x5 mm on PCC 1:2:4 type B-1 platform 40 cm above the ground level and 45 cm below the ground level, frame factory fabricated with front and back openable double door system lockable/openable by Keys general construction confirming to IS:8623/93. a) TPN, Aluminium bus bar 200 Amps insulated with colour coded heat shrinkable sleeve and shall be mounted on suitable size “F” class insulators. b) Incoming MCCB 160 Amps 36 KA, 415 Vots, 50 Hz, FP. – 1 No c) LED Indicator lamp RYB - 01 set of three.

Supply, install, testing and commissioning of out door type cubical meter panel board outer shell made out of 3.15 mm thick MS sheet of Size not less than 900 mmX900mmX400 mm and MS angle iron section 50x50x6 mm mounted on PCC / Wall frame factory fabricated with front openable 3 phase 4 wire 415 Volt, 50 Hz, all as specified and directed by Engineer-in-charge and comprising of the following :- a) TPN, Aluminium bus bar 200 Amps insulated with colour coded heat shrinkable sleeve and shall be mounted on suitable size “F” class insulators. b) Incoming MCCB 63 Amps 16 KA, 415 Vots, 50 Hz, FP. – 1 No c)outgoing MCB DP “ C” Series 40 Amp 16 KA 230 Volts, 50 Hz, – 4 Nos d) Provision of Space for Electric meter. – 4 Nos e) LED Indicator lamp RYB - 01 set of three.

Supply and fixing MCCB TP 100 Amps, 16 kA, 415 Volt AC, 50 Hz, complete with sheet metal enclosure of 1.6 mm thick MS sheet with powder coat paint including connecting with existing system with existing cablling network including making good disturbed surfaces complete all as specified and directed.

Supply,install,testing and commissioning of out door FPB cubical factory made dust,vermin proof fabricated to 3.15 mm thick CRCA sheet and mounted on angle iron of size 35x35x6mm and double door front/rear opening and locking arrangement floor mounted ,bus bar 200 Amp capacity copper bus bar with insulated slips fixed on post insulator as per complete details mentioned in Annexure - F to BOQ. NOTE :- (i) Annexure- F to BOQ has been uploaded separately alongwith tender documents and is part of BOQ for all purposes. (ii) Drawing should be approved by GE before placing the order.

Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by mean of GI wire 4 mm dia by means of bolts, nuts check nuts and washers of GI or steel and connecting to earthing test point, main switch board, testing on completion including PCC cover and frame, PCC (1:3:6) type C-2 as in earthing pit, MS funnel with wire mesh GI pipe 20 mm dia light grade for watering and GI pipe 20 mm dia light grade for the protection of GI wire from earth pit to earth point complete including necessary excavation and earth work in any type of soil, returning, filling in approved soil and disposal of surplus soil to a distance n.exc 50 m all as specified as shown in electrical plate No 5 SSR Part-I. PCC chamber shall be constructed at least one metre away from the earth pit and GI pipe fittings for watering shall be provided up to chamber and cost of the same is deemed to be included in the rate of earthing. Note :- Test result should be vary max up to 5 ohm / satisfied of user.

M&L for earthing with galvanized steel earth plate electrode 600mm x 600mm x 6mm buried directly in ground (earth pit not less than 2.25 metre deep below ground level) vertically, with top edge of the plate not less than 1.50 mtr below normal ground level, connected to galvanized iron wire 32x6mm dia by means of nuts, bolts, washers of GI steel all as shown on electrical plate No 3 of MES Schedule Part I connected to earthing test point and testing on completion with and including necessary excavation and earth work, earth electrode, earthing lead from electrode to equipment/substation, adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded black trap/granite/Basalt stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, pre cast RCC (1:2:4) type B-1 (using 20mm graded black trap/granite/Basalt stone aggregate) 40mm thick cover, reinforced with 6mm dia bars 3 Nos both way with 12mm dia round bar handle, GI light grade watering pipe 20 mm dia with funnel and wire mesh, and 50 mm dia GI light grade earth lead protection pipe, complete all as specified and directed. Note:- (i) Main earthing lead from earth plate electrode to test point upto length of 7.50 mtr shall deem to be included in the unit rate quoted by the tenderer against this item. (ii) GI protection pipe and earthing strip beyond 7.5 mtr long shall be measured and paid seperatly. (iii) Test result should be less than 1 ohms or satisfaction of user.

Supplying, transporting, erecting Steel tubular swaged poles type 410 SP-55 ( 11.0 metres long) complete with cast iron base plate, final, taper plug, bolts, nuts and screws as specified, including necessary excavation and earth work , PCC 1:4:8 type D2 in foundations below pole, PCC 1:3:6 type C2 around poles and PCC 1:3:6 type C1 as in plinth block , disposal of surplus soil to a distance not exceeding 50 m and depositing where directed, painting steel tubular poles exposed surafces with Aluminium paint two coats over one coat of red oxide primer and providing 300 mm wide bands (3 bands/ straps with synthetic enamel paint and 2 bands with Black bituminous paint ) from plinth block and numbering of poles , painting embedded portion of poles with one coat of bituminous paint complete all as specified and directed. Note:The rates quoted deemed to be included for providing all material & accessories including with fabrication of suitable bracket of MS angle iron 50x6 mm to be fixed for LED Flood Lights on 11 mtr steel tubular pole and any other item required as per site requirement to incorporate above features

Supply and fixing of LED flood light fitting with mandatory driver set having pressure die cast aluminium body (LM 6 alloy) and lenles suitable for 120 watt IP 65 and IK 07 protection having company LOGO ingraved complete in respect with system lumes high power LED complete all as specified and directed.

Disconnecting All HT/LT electric connection of the existing transformer from the HT Pole/HT Panel and taking out transformer any cap up to 500 KVAand Shifting from one place to another place intire cantt including connection or deposting MES AGE E/.M Store Yard incl loading , unloading and transporting etc complete as directed.

M&L for hard core of broken stone aggregate n exc 20mm deposited spread and levelled in layers n exc 15cm thick complete all as specified & directed.

M&L chain link in replacment fencing 50x50mm mesh (10 guage) GI wire fixing on MS angle post including provision of binding wire incl taking down old one etc complete all as specified & directed.

S&F rolled mild steel in replacement such as MS angle 65x65x6mm and MS plate iron 40x6mm cut to required length fixed independently including all necessary drilling, bolts or riveting etc and similar works incl taking down old one etc all as specified and directed by Engr-in-Charge and conforming to grade Fe 410-S complete all as specified & directed.

S&F screw bolts in replacement (machine made) 12mm dia with hexagonal or square head at one end and screwed the other or screwed both ends each screwed and to fixed with washer and one hexagonal or sqare not exc 5 cm long dia of shank 5 to 10mm incl taking down old one etc complete as specified and directed.

S&F 10mm dia MS round bar in replacment fixed independently to the angle iron post through chain link fencing with welding incl taking down old one etc complete all as specified & directed.

Provn of 3.6m wide MS gate in replacment alongwith wicket gate with RCC pillar and guide channel etc. complete as shown on drg incl taking down old one etc complete as specified and directed.

Disconnecting electric connection from existing position and taking out unserviceable electric cable from existing position any size and capacity and deposite in MES store yard for collection in schedule of credit etc complete all as specified & directed .

Supply installation fixing of Pole box with MCB and suitable connector for 3ph and/or single-phase connections and Loop in loop out. Encloser made up of polycarbonate thermoplastics enclosure, which should be shock proof, safe, IP66 as per EN 60529, weather proof, rust proof, dust proof, water proof, and internally embedded gasket with provision for cable entry through similar IP rated glands. Half turn screw openable lid, which are made out of polycarbonate material. 25 Sqmm Terminal - 4Nos 6A, SP 10kA MCB - 1No, including calble/wire connection complete Cable Size 4C X 16 Sq.mm Aluminium XLPE Cable ( Loop In / Loop Out) Overall dimension (255 x 222 x 112) mm

Supply and fixing in repairs wall mounted bus -bar three phase, 8 way , 415 Volts with 4 Nos Aluminium Bus bar 200 Amp in sheet metal enclosere of 1.6 mm thick MS sheet with powder coat paint including connecting with existing system and cabling network including making good disturbed surfaces complete all as specified and directed.

Supply & fixing of automatic street light timelite distribution board 40 Amp , 3 pole /230 V digital time switch for automatic switching of street lights based on conforming to IP-54 degree of including mounting bracket, cable glands, openable doors with lock complete all as specified and directed .