Providing of Synthetic track and renovation of Park in front of house no. 140 in Sec 13-17 ward no. 01, MC Panipat (Rural)(2nd Time)

Amount

FRP Multiplay station, capacity 10-25 children, Main Frame-50 NB MS Pipe Class B, Area-7*5mtr., Hand Ralling-20 NB MS Pipe Class B, Ladder Frame-25 NB MS Pipe Class B, Material-FRP, Platform-1.6mtr., Rope Climber-1*2.5mtr., Safe Play area 8*6mtr., Side Chute-4mm FRP, Slide Length-3.0 mtr., Total Height-4.0mtr., Tunnel Climber 32 NB MS Pipe class B with complete fitting on site.

MNX 25 Power Contactors 415V AC (3 Pole)

Air Walker: Providing, designing and fixing of Air-Walker of size 100*550*1480mm fabricated with main post og 140mm dia and 3.00mm thick made up of hot rolled tubular steel and hot dipped galvanized, and powder coated 80-120 micron thick using Akzo Nobel or equivalent in desired shade and colour. All welding joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to br applied at all welding points prior to finishing. Base plate cover shall be made up of virgin LLDPE plastic by rotational moulding with minimum 4.00 mm thickness UV resistant and colour as approved by Engineer-in Charge. High quality grip rubber should be used on handles. Foothold shall be made of Nylon alloy with rounded edge to prevent impact and injury. Maintenance free bearing should be used in equipment manufactured by reputed company duly sealed and self lubricated to be approved by Engineer in Charge. Equipment to be fitted with inbuilt limiters. The equipment should be fixed on ground with concrete of minimum streength M25 and J shaped welded bolts. Including Contractor Profit, overhead charges, GST and all others charges.

Leg Press: Providing, designing and fixing of stair stepper in a combination of pair and a single step of size 2000 X 550 X 1600 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber at top end. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc. .Including Contractor Profit, overhead charges, GST and all others charges

Pull Chair: Providing, designing and fixing of Pull pair of size 2500 X 800 X 2000 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber at top end. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc. Including Contractor Profit, overhead charges, GST and all others charges.

Seated Chest Press :- Providing, designing and fixing Seated Chest Press of Pull pair of size 1800 X 700 X 2000 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all . Including Contractor Profit, overhead charges, GST and all others charges.

Arm Wheel :- Providing, designing and fixing Arm Wheel in a pair of size 850 X 800 X 1800 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be. Including Contractor Profit, overhead charges, GST and all others charges.

Twister:- Providing designing and fixing Twister of size 1700*1300*1300mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welded joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Foothold shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured bt rotational moulding with minimum thickness of plastic 4.00mm, colourful and UV resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved bt Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. Including Contractor Profit, overhead charges, GST and all others charges.

`Providing and Fixing Multi Play Activity equipment Covering Area: 27`L x 13`W FRP Wave Slide 6mm thick at 5`H - 2set. FRP Square Canopy 2mm thick -2set FRP Fancy Railing Monkey and Frog shape-4set. FRP Platform 37.5 x 3`.5 x 5mm thick-2set. M.S Walking Bridge 6`Long - Iset. M.S Safety railing - 2set. M.S Climbing Ladder-2set. M.S Wave Climbing Ladder 8`Long-Iset. M.S Sea-Saw (Double) 7`long having 4no FRP Sitting seat of 3mm thick With jerk proof system using no semi tvres- Iset. M.S vertical station of m.s pipe 2``. 5 x 12Gauge ISI Mark-2set. Including Contractor Profit, overhead charges, GST and all others charges.`

Supply of ” PVC/XLPE INSULATED (HEAVY DUTY) ELECTRICAL CABLES FOR WORKING VOLTAGE UPTO AND INCLUDING 1100 VOLTS TO IS : 1554 (PART-I) 1988 / 7098 (Part-I)1988 WITH COPPER CONDUCTOR– ISI MARKED 2.5 sq mm 2 core unarmoured wire Grandlay/Havells/KEI/ Polycab/Plaza/RR Kable

`Supply and eraction of ” PVC/XLPE INSULATED (HEAVY DUTY) ELECTRICAL CABLES FOR WORKING VOLTAGE UPTO AND INCLUDING 1100 VOLTS TO IS : 1554 (PART-I) 1988 / 7098 (Part-I)1988 WITH COPPER CONDUCTOR– ISI MARKED 2.5 sq mm 3 core unarmoured wire Note: 25 Mtr per Pole Grandlay/KEI/ Polycab/Plaza/RR Kable`

`SUPPLY AND ERECTION OF DECORATIVE POLE 3 MTR LONG VEGA POLE INCLUDE 72 WATT LED LIGHTS MADE OUT OF MS SECTION WITH PC DIFFUSER AND CASTINGS IN ALLUMINIUM. LOWER SECTION OF THE POLE IS MADE OF MS PIPE DIA 150 MM AND HEIGHT 1 MTR WITH 3.2 MM THICKNESS MS CAST IRON BASE PLATE AND TOP SECTION MADE WITH PC DIFFUSER TUBE IN HEIGHT OF 2 MTR. DIFFUSER IS MADE IN UNBREAKABLE PC MATERIAL WITH TITA FINISH. RUBBER GASKETS ARE PROVIDED AT APPROPRIATE LOCATION FOR WATER RESISTANT (IP 65). VEGA POLE MADE IN 72W LED IP65 AND CPU PAINTED IN THREE LAYERS COATING IN WHICH IST LAYER WITH ETECH PRIMER, 2ND LAYER WITH PU PAINT COATING THICKNESS 85 MICRONS. ALSO USE DEPOXY ETECH PRIMER AND GREY PRIMER BEFORE PAINT COATING A OVAL MCB AND 3 CORE *0.75 SQ.MM FLEXIBLE ISI COOPER WIRES AT THE LOWER PART OF THE POLE WITH ALL LABOUR and MATERIAL REQUIRED TO COMPLETE THE JOB IN ALL RESPECT UPTO THE ENTIRE SATISFACTION OF ENGINEER-INCHIEF OF THE WORK. MAKE GLOWMAC, PHILLIPS, CROMPTON ,VAK LIGHTING.`

`Supply and Erection of Timer Contractor, DP, MCB mounted on Bakelite sheet and Installed in water proof CRCA Sheet 18 SWG duly painted with powder coated paint Box of Size 12``x15``x5`` Sintex/Semens make pvc insulated pole boxes of suitable size duly lockable including Input and Out Put Connectors Bakelite/Porclein of 63A Rating and neccessary service cable up to 10 mtr complete with internal copper wiring and installing the same on pole/pedestal with suitle means at hieght desired by Engineer in charge to aviod theft upto entire satisfication of engineer incharge with following specification. Timer :-Quartz Analog 24 Hour Operation (G.E/LandT/Siemens/Indoasian/CandS) Contractor :- 3Pole 32A, 415Volt. (Schnider/LandT/Siemens/Indoasian/CandS), DPMCB :- 40A 2pole. (G.E/LandT/Siemens/Schnider/CandS)`

Electric Meter Connection of 10 kw 3 phase from UHBVN complete in all respect. Note:- Actual Payment of this item will be made in accordance with payment receipt of UHBVN

Providing and Laying of EPDM Synthetic court 15mm ( 9mm SBR plus 6 mm EPDM) including loading, unloading, carriage of material, markings,contractor profit, overhead charges and all taxes complete in all respect.

Bidder Name

Amount

Gupta and Company(GSTN-06AFHPG6094G1ZE)

The Jai Maa Kali Coop Society(GSTN-NA)

The Jai Maa Kali Coop Society

Gupta and Company