Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.1 LAccepted-Finance NARAN PALLY PURBO BARDHAMAN PIN 713 101 | PURBA BARDHAMAN | WEST BENGAL | 713101 | L1 | Accepted-Finance Quoting
Lower rate | |
| 2 | L2₹46.0 L+₹89,000 (1.97%)Rejected-Finance MAIRAKATA P O GARBETA DIST PASCHIM MEDINIPUR 721127 | GARBETA | PASCHIM MEDINIPUR | WEST BENGAL | 721127 | L2 | Rejected-Finance Quoting
Higher rate | |
| 3 | L3₹46.1 L+₹1.0 L (2.22%)Rejected-Finance 0 KALIKAPUR KALIKA PUR CHAMPAHATI SOUTH 24 PARGANAS WEST BENGAL 743330 | 24 PARAGANAS SOUTH | WEST BENGAL | 743330 | L3 | Rejected-Finance Quoting
Higher rate |
Tender Value
Refer Docs
EMD Value
₹92,000
Closing Date
31 Oct 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Superintendent Engineer
Office of the Superintending Engineer, Western Electrical Circle, Purta Bhavan Burdwan-713103
Proposed Level II Trauma Centre EI work at Anamoy SSWH second campus of BMCH in the District of Purba Bardhaman PART A SITC of EI Work
2023_WBPWD_590768_1
WBPWD/SEWEC /BED /NIQ-109/2023-24
Open Tender
ELECTRICAL WORKS ORG
Item Rate
120 days
Purba Bardhaman
Please refer Tender documents.
5 documents required · 5 mandatory
₹92,000
Office of the Superintending Engineer, Western Ele
8 Dec 2025
11 Oct 2023
2 Nov 2023
11 Oct 2023
31 Oct 2023
17 Oct 2023
12 Oct 2023 - 13 Oct 2023
16 Oct 2023
Amount
DISTRIBUTION WIRING
Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board complete with 2 no. suitable size “Ph & N” copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish.[only PVC Rigid Conduit on ceiling and remaining portion concealed]. MAKE- GLOSTER/ POLYCAB/ RR
Average run 8 mtr
Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point incl. S&F 240 V 6A 3 pin Modular type plug socket & Modular type switch (Brand approved by EIC) incl. S&F earth continuity wire, fixed on 4 Module GI switch board with 3/4 Module top cover plate flushed in wall incl. mending good damages to original finish. MAKE- GLOSTER/POLYCAB/RR 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC
On Board
S&F sheet metal inspection box (16 SWG) of the following sizes flushed in wall by housing the same after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works.
200 mm x 150 mm x 65 mm
240 mm x 200 mm x 65 mm
Supply & Fixing bakelite / perspex top cover on existing switch board by Brass screws after making housing for switch by cutting bakelite / perspex cover and making necessary connections as required.
200 mm x 150 mm x 65 mm
240 mm x 200 mm x 65 mm
Supplying & Fixing 2 way CI Round box with cover concealed in ceiling/wall.
PLUG & SOCKET
Supply & Fixing 240 V, 4 nos. 6 A, 3 pin Modular type plug socket with 4 nos. 6A Modular type switch 16A Modular switch type MCB (C-Curve) and Indicator without plug top on 2 row 18 Module GI Modular type switch board with 2 row 18 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (Brand approved by EIC) [Computer Plug].MAKE- GOLDMEDAL/ LEGRAND/ CRABTREE
Supply & Fixing 240 V, 16A, 3 pin Modular type plug socket with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (Brand approved by EIC) [Sep 16A Plug].MAKE- GOLDMEDAL/ LEGRAND/ CRABTREE
Supply & Fixing 240 V, 2 nos. 16 A, 6 pin Modular type plug socket with 2 nos. 16A Modular type switch without plug top on 8 Module GI Modular type switch board with 8 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (Brand approved by EIC) [2x 16A plug]. MAKE- GOLDMEDAL/ LEGRAND/ CRABTREE
S&F 240V, 2 nos. 6A, 5 pin Modular type plug socket with 2 nos. 6A Modular type switch with Indicator Modular type without plug top on 6 Module GI Modular type switch board with 6 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (Brand approved by EIC) [2 x 6A Plug]. MAKE- GOLDMEDAL/ LEGRAND/ CRABTREE
Supply & Fixing 240 V, 4 nos. 16 A, 3 pin Modular type plug socket with 4 nos. 16A Modular type switch, 20A Modular switch type SP MCB (C-Curve) and Indicator without plug top on 2 row 18 Module GI Modular type switch board with 2 row 18 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (Brand approved by EIC) [ 4x 16A plug]. MAKE- GOLDMEDAL/ LEGRAND/ CRABTREE
AC machine installation related EI work
Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket with 20/25A Modular switch type SP MCB (C-Curve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (Brand approved by EIC) [ Single Phase AC plug]. MAKE- GOLDMEDAL/ LEGRAND/ CRABTREE
Supply & Fixing 240 V, 25 A, 3 pin Modular type plug top with indicator (Brand approved by EIC) & necy. Connections.[ Single Phase AC ToP]. MAKE- GOLDMEDAL/ LEGRAND/ CRABTREE
Supply & Fixing 240 V, 25 A, Modular type starter with 25A Modular switch type DP MCB (C Curve) and 4 Module GI Modular type switch board with 4Module top cover plate flushed in wall incl. S&F switch boardand cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc (Brand approved by EIC). [Single Phase AC Starter]
S&F 415V, 3Ph, dual AC machine timer made of 14 SWG MS sheet (size approx– 400x450x200mm/ or as required size) with powder coated synthetic paint incl. hinged type MS door , inter locking system with S&F following electrical accessories & front door locking arrangement with all connection, earthing attachment on wall with powder coated painting including suitable foundation or fixed on wall as per direction of EIC with supply and fixing the following accessories- (i) 415V, 63A FP MCB (as incommer) (L&T / Legrand / ABB) -1 No. (ii) Analog type Timer Switch (L&T Make/ ABB/Legrand) - 1 No. (iii) Metal Din Channel MCB supporter---4nos (iv) 63A AC1 duty Four pole power contactor ( Make L&T/ABB/Legrand) - 2 Nos. (v) 4 pole 63 A FP MCB Changeover switch for auto/ manual operation ---1no. (Make L&T/ABB/Legrand) v) LED Indicator lamp (Make ESBEE / L&T / Legrand)– 3 nos. vi) Outgoing connector make ELMAX-----4nos All power line inter-connection is to be made by 6 sq.mm & control circuit with 1.5sqmm PVC copper wire with proper socketing, taping , Ferrule marking etc. The box should be fixed on wall with suitable size of flush nut and necy. Connection. ( wire make Finolex/ Havells/ KEI/ Polycab) All the materials have been fixed on brush metal chair inside the box and inter connected by 4 sq.mm PVC copper wire (8 meter length) . The box should be fixed on wall with suitable size of flush nut and necy. Connection. [for 3 ph 7.5 TR AC timer control]
Supply and installation of 1-Phase dual timerAC machine made of 14 SWG MS sheet (size approx– 400 X 350 X 175mm/ or as required size) with powder coated synthetic paint incl. hinged type MS door , inter locking system providing incoming and outgoing copper wires and other accessories. The interconnection should be made by suitable size of copper wire with proper socketing, taping, Ferrule marking as per direction of EIC & earthing attachment. The box should be painted by powder coated paint. a) 25/32 A DP MCB -1 No. b)Analog time switch - 1 No. c) 2-pole 25/32A single phase power contactor, - 1 No. d) Add-on auxiliary contact block(1 NO+1 NC) -1 no. (all Make- L & T / ABB / Siemens / Legrand) e) Outgoing connector make ELMAX-----2nos f) Indicator Lamp Red , Green colour (ESBEE / Legrand / L&T) - 2 Nos. g) 40 A DP MCB changeover switch for auto / manual operation - 1 No. h) Steel Key Lock – 1 No. i) Metal Din Channel MCB supporter---2nos [for single ph AC machine Timer] ( wire make : Finolex / Havells / Polycab)
Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint [for 3 ph AC machine outdoor power line supply]
Supply & laying 4 Core 6.0 Sq.mm unarmoured Copper Cable with incl necy socketing, taping, ferrule marking etc. as per G.S for Power line of outdoor unit of 3 ph AC machine. ( Make RR Kabel / KEI / Havells / Polycab)
S&F 415V, 3 phase, 50 Hz A.C starter unit in SS enclosure (Make :-- L&T Cat. No-- MU-G10H DOL starter, SS95974, Relay Range 20-32A) on angle iron frame incl. necessary addition & alteration of connection as required. [for 3 ph AC machine starter]
Industrial Sockets
Supplying & Fixing Industrial Plug & Socket board with 415 V, 30A, TPN & Earth Metal Industrial Plug socket & 30A Industrial top incl. S&F 32 A TPN/FP MCB breaking capcity 10kA (C- Curve) in SS enclosure fixed on wall and cecessary conection. (Brand approved by EIC) [ 3 phase M/C Socket]
Supplying & Fixing Industrial Plug & Socket board with 240 V, 20A, SPN & Earth Metal Industrial Plug socket & 20A Industrial top incl. S&F 20 A SP MCB breaking capcity 10kA (C- Curve) in SS enclosure fixed on wall and necessary conection. (Brand approved by EIC) [ Single phase Medical Equipment M/C Socket]
Supply & Laying Wires
Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required. MAKE- GOLDMEDAL/ POLYCAB/RR
3 x 22/0.3 (1.5 sqmm) as ECC (for SPNDB To Sep 2nos. 6A +6A socket, )
2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC (for SPNDB to Computer points & TPNDB to 16 A plug, 2x 16 A)
2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC (for circuit wiring from TPNDB to AC Socket & Starter and TPNDB to 4 x 16 A sockets)
2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC (for TPNDB to SPNDB'S and TPNDB to Single phase AC machine timer)
4x84/0.3 (6 sqmm) + 2x56/0.3 (4 sqmm) as ECC (For AHU Panel interconnection)
4x80/0.4 (10 sqmm) + 2x84/0.3 (6 sqmm) as ECC (For Condensing Unit of DX Type AC)
4x126/0.4 (16 sqmm) + 2x80/0.4 (10 sqmm) as ECC (For UPS connection)
Cutting Channel of size (40 mm x 40 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 19 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles.
19 mm dia 3 mm thick polythene pipe without earth continuity wire
Cutting Channel of size (43 mm x 43 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 25 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles.
25 mm dia 3 mm thick polythene pipe without earth continuity wire
Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works.
20mm size
25mm size
S & F of 1" dia PVC flexible pipe.[ for UPS connection ]
VTPNDB, TPNDB & SPNDB
Supplying and fixing 4 way double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, concelled in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. MAKE- LEGRAND/ABB/L&T
4 Way ( Up to 160 A )
4 way (Up to 250A)
Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection as per G.S. MAKE- LEGRAND/ABB/L&T
125A (VTPN I/C)
200 A (VTPN I/C)
Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. MAKE- LEGRAND/ABB/L&T
Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. MAKE- LEGRAND/ABB/L&T
Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection as per GS. MAKE- LEGRAND/ABB/L&T
63A FP [6 way HTPN I/C & 4 way HTPN I/C]
40A DP [ 2+14 way SPN incomer]
Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connectionas per GS.
6-32A SP MAKE- LEGRAND/ABB/L&T [ HTPN + SPNDB outgoing]
63A TP [VTPN outgoing ]
32 A TP [VTPN outgoing)
40A SP [HTPN outgoing]
32A FP [3 ph AC m/c Loop box i/c ]
63A FP [ UPS I/C & O/G]
Supplying and fixing double door sheet steel (16SWG), powder coated cable end box for TPN DB horizontal / vertical enclosure with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish with nuts bolts etc incl. provision for earthing attachment. MAKE- LEGRAND/ABB/L&T
for 4way VTPN DB
for 6 way HTPN DB
Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment. MAKE- LEGRAND/ABB/L&T 2 Way
Supply & Laying Cables
Supply & Delivery of 1.1 KV grade XLPE/PVC insulated. PVC sheathed, steel Armoured Al. conductor Cable of the following size, and conforming to IS: 7098(Part-I):1988/1554(Part-I):1988/ 5831:1984/ 3961(Part-I):1967/ 3975:1970/ 10810:1984 / 3975:1970 /8130:1984/ 3961:1967/ 10418:1982 / 10810:1984 as amended upto date, in respect of component materials and tests, and as per the approved makes list attached herewith ( Make- Universal/ Polycab/ RR cable/ Gloster) as per choice of EIC. The cable shall conform to anti termite and anti rodent features certificate along with Test certificate must be sumitted at the time of supply.
4 Core 95 sq.mm (Panel outgoing M/S to VTPN 200A I/C)
4 Core 70 sq.mm (Panel outgoing M/S to VTPN)
4 Core 50 sq.mm (Panel outgoing M/S to MRI incoming power, Panel outgoing M/S to UPS & UPS to UPS VTPN )
4 Core 16 sq.mm (Panel outgoing AHU panel to AHU motor )
4 Core 35 sq.mm (From VTPN to HTPN)
4 Core 10 sq.mm ( AC machine 3 phase timer to Loop Box )
Laying of cable as below, on existing Cable Tray and binding with suitable size GI wire.
Up to 50 sqmm
From 70sqmm to 150sqmm
Laying of cable from 3/3½ core 35 sqmm to 50 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting
Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting.
Laying of cable above 3½ core 50 sqmm and upto 3½ core 90 sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting.
GLAND & FINISHING
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring (Dowels make) for dust & moisture-proof entry of XLPE/PVC armoured cables as below -
4 Core 95 sq.mm
4 Core 70 sq.mm
4 Core 50 sq.mm
4 Core 16 sq.mm
4 Core 10 sq.mm
4 Core 35 sq.mm
Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials.
4 Core 95 sq.mm
4 Core 70 sq.mm
4 Core 50 sq.mm
4 Core 16 sq.mm
4 Core 10 sq.mm
4 Core 35 sq.mm
Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.
1.5 sqmm [N.S.]
2.5 sqmm [ F-5/9(i)]
4 sqmm[ F-5/9(ii)]
6 sqmm[ F-5/9(iii)]
10 sqmm[ F-5/9(iv)]
16 sqmm[ F-5/9(v)]
Supply & Fixing of perforated GI cable tray with perforation not more than 17.5% suspended from ceiling / wall incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support. a) With 25x25x3mm angle iron support 300x50x1.25mm (18SWG)
Supply & Fixing of perforated GI cable tray tee with perforation not more than 17.5% suspended from ceiling with two nos. suspenders & 25x25x3mm angle iron for supporting the cross member incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support. 300x50x1.25mm (18SWG)
SUPPLY & FIXING OF LIGHTS
Supply & Delivery 250 Volt, 4Ft. Long box type Luminaire incl. S &F 1(one)no. 18/20 Watt LED polycarbonate T8 tube with minimum Luminous efficassy 100 Lumen/Watt with inbuilt driver and metal heat sink [Make: Crompton/ Benlo/ Surya]. With 3 years warrenty.
Supply & Delivery 250 Volt, 4Ft. Long box type Luminaire incl. S &F 2(Two)no. 18/20 Watt LED polycarbonate T8 tube with minimum Luminous efficassy 100 Lumen/Watt with inbuilt driver and metal heat sink[Make: Crompton/Benlo/ surya]. With 3 years warrenty.
Supply and Fixing 240Volt 12 Watt 1200 lumen B 22 base non-dismmable LED Lamp on wooden circular board [Make: CROMPTON/benlo/ surya]. With 3 years warrenty.
Fixing only single /twin fluorescent light fitting complete with all accessories directly on wall/ceiling/HW round block and suitable size of MS fastener.
Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.
Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.
SUPPLY & FIXING OF FANS
Supply of 5 Star rated 48" (1200mm dia) ceiling fans complete with all accessories (Make - Crompton, HS PLUS / Orient, Summer King / Usha, Striker).
Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.
Extra for supplying additional wire for down rod & painting the rod exceeding 30 cm by 3x1.5 sqmm flexible copper wire.
Engraving the deptt. number with 10 mm lettering on the body of fan upto 10 letters incl. hifen, stroke or stop.
Painting upto 10 letters of the engraved number with approved black /red paint as required.
Extra for additional one letter incl. hifen, stroke and stop.
Extra painting for additional one letter of the engraved number with hifen, stroke etc. with black or red paint.
Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc.
S&F MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting.
Supply and delivery of 230V 50 Hz, (9")/ 230 mm, 1370 R.P.M heavy duty double bearing Exhaust fan ISI marked as per IS 3103(1975) with all necessary accessories like wire guard, min 2 years warranty certificate, test certificate etc. [Make: EPC, CGL, Orient]
Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust for 23 cm (9")
Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) For Al 23 cm (9")
Supply & Delivery of 18" (450 mm) high flo ( air delivery-- 4500 CFM, RPM-- 1400) non-oscillating type metal body, metal blade Wall Bracket fan with inbuilt regulator, double ball bearing, intergally cast LM6 impeller with test certificate & warranty certificate with regulator (Capacitor Type: P2) ( Make-Orient / EPC Tempest / Crompton).
Fixing only cabin fan on wall/ceiling by wodden board by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length.
EARTHING
Excavation of soil for installation of Earth Electrode and filling & ramming for Soft soil
Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below:
By ISI-Medium GI pipe
Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 40 mm x 6 mm ISI marked on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required
Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages.
Solid GI wire No. 4 SWG
Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe.
MISCLLENEOUS
Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250V, 15A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc. earthing terminal with lug, on steel tubular pole near base, including Supply & Fixing 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint.
Excavation of soil and filling & ramming for Soft soil (Road Crossing) (2' Width x 3' Depth)
Dismentling the existing E.I. work incl existing defective, non functioning Panels, PBDB, LBDB, Main Switch etc by Co's own tools & tackles by maintening normalcy as far as possible as per direction of EIC and following existing fittings from its original position & storing properly incl handed over the same at Division Store as per direction of EIC after all no additional cost or no extra cost will be paid by the department after completion the installation.
Submission of details SLD ( both hard & soft copy ) by AUTO CAD of the above job with indicating all the items of Power Distribution system with position of Panel, VTPN's, PBDBs, LBDBs , Power Plugs , Lights , Fans , Switch Boards etc. incl. Submission of all testing reports in addition to earthing testing of EI & LC with detail data sheet regarding the EI work to complete the installation as per direction of EIC. Moreover marking all the Main Switches, DBs including the MCBs by Paint.
Supplying and fixing 240/415 V change over (MCB module) of on din rail of existing DBs/ enclosure and necessary connection.
63 A FP (Brand approved by EIC)
Supply & Fixing of Blank Plate for modular box as per G.S and also for requirement (Brand approved by EIC)
Supply/delivery 240 volt 20A 4 way Electric Extension Board with P,N, E. (Make: Havells / Legrand/ Anchor) as per direction of EIC.
Supply and fixing net guard for electrical equipment of size 3m x 3m x 1 m fabricated from 40mm x 40mm x 5mm angle iron support and 25mm x 5mm flat iron and 8 SWG wire including painting , locking arrangement as per direction of EIC.
Supply & drawing 6 SWG GI wire for earth continuity conductor in different cables with laying except at Underground.
LED Signage Board only for OT
Supply & Fixing of indoor type LED Display Board of approx. size 3 ft x 2 ft with front side 3mm thick A-1 quality ACP Blue colour (AD-41) board. The matter of the LED board should be in English alphabets made of laser cutting box type white colour letter of suitable size & shape having male/female incl. all fixing facility, from 3 mm thick imported white acrylic sheet including jointing/setting the same part by part and fixing on the board by using chloroform/machine screw etc. is to be fixed on ACP board ( On front) incl. S& F SMD module ( Best Quality make) of required quantity for illumination of lettters including necessary SMPS & Connection also carrying charges . [ for 3 Nos OT ]
Designing, fabrication, supply, installation, testing & commissioning of outdoor type LED signage size 12 ft x 4ft x 4" or other suitable size to accommodate all the matters/contents as approved by the authority Aluminium Composite Panel (ACP) box supported with 1.5" x 1.5" MS hollow square pipe or Aluminium hollow square pipe of 16 SWG all around. The 3 mm ACP fabricated should be provided by laser cutting 6 mm laser cutt acrylic letters and border line of the front side should cover with 1.5" x 1.5'' (16SWG) Aluminium channel as per the direction of EIC. Providing required 40mm x40mm x6mm MS angle iron support with painting with two coats of super enamelled synthetic paint over one coat of approved R.O primer. The composite installation will be water, vermin and dust insulated and protected. 26SWG GI sheet will be proivided on the back side of the board to protect from rain water. Base plate (10 mm thickness) required for fixing the necy. nos. nuts, bolts, washers, supporting angle iron, Clamp etc. and ACP sheet on all sides to be moulded uniformly of the board.
actual Letter contents/Govt. LOGO/actual etc. sign will be executed as per approval of the authority)
3 mm thick ACP (Mk. Aludecor / Pratap bond) Royal Blue colour & White colour Acrylic sheet having lettering of white color fixed on engraved top of facia excluding logo portions having white background and logo color as per design.
Letter : Size of 8"/ 9" / 12", Colour : White
LED : necessary module wattage, life- minimum 60,000 burning Hrs, IP-67, double / triple line to be fixed in the Acrilyc letters on ACP board (make: Samsung SMD 5630 (Korea) / Osram)
Necessary Electronic Diver / power supply device to be fixed in the ACP or suitable places
Intensity : Same & smooth uniform throughout without any dark patch
Visibility : upto 250 meters for normal eyes
Internal electrical wiring will be done by FRLSH (unsheathed) 3 core 1.5 sq.mm copper flexible cable as required through interior conduit and electrical raceway.
The cost of transportation and scaffolding charges are included.
LT Distribution Panel
Specification of indoor type L.T. panel Board with SFU as Incomer and as outgoing feeders in a suitable transportable unit, ready for operation on being installed in a fixed position. The Panel board shall be Self-supporting, Compartmentalized, Floor mounted, Indoor Type, Dust and vermin proof. Incoming and outgoing cable entry from 'Top' at rear side. Gland plate should be two part detachable type. fully compartmentalized distribution panel board, having rigid and self supporting structure fabricated with 14 SWG CRCA sheet with M.S. angle iron frame (main frame with 25 x 25 x 5 mm angle MS angle iron). The base of panel should be made with 75mm x 40mm x 4.4 mm M.S. channel. Lifting hooks to be provided in each transportable unit. The doors shall be removable type mounted on hinge with key locking arrangement for each compartment. Doors shall be both on front and rear. Degree of protection of the board is IP43.
Painting : Board should be properly degreased, derusted before phospheting. Alkaline Melamine Epoxy based Powder coated paint to be done with minimum thickness of 70 micron avg. Shade will be Pebble Grey, No.RAL 7032 both inside and outside. Continious Earth bus of size 40 x 5 mm GI to be provided at a hight of 100mm from the bottom and brought outside of the panel of 50mm. 'CENTRAL POWER RESEARCH INSTITUTE' type test report for the Panel Board for Three phase and Neutral short circuit withstand strength test on main circuit BusBars of HBB+VBB for 65kA rms for 1.0 second with intial peak of 143kA, 415V,AC, 1200A, to be Furnished.
Termination : Incoming cable termination Bus should be suitable for 2 Nos. 3.5 / 4 C x 185 sq.mm Al (Arm.) PVC cables. Outgoing feeder terminals should be as per rating.
System Voltage : 415V, 50Hz, TPN. Control wiring cable size : minimum single core multistranded 1.5 sqmm PVC Cu flexible wire. CT wiring cable size: 2.5sqmm flexible. Colour Coading : Phase : Red, Neutral : Black, Earth : Green. (Mk. Finolex / Havell's / Polycab)
INCOMING : a) 415V, 400 Amp , TPN SFU with propet HRC fuse (open execution type) - 02 (two) Nos. (Switch Mk. L&T / Siemens / Schneider / ABB)
BUSBAR : Bus Bar Materials : Aluminium Bus Bar Size of Bus Bar : Main Bus - 4 x 50 mm x10 mm ,3 phase & Neutral suitable for 600A. Feeder Connection : 4 x 25 mm x 5 mm for 3 phase & Neutral - suitable for 125A & 4x30x5mm for 3 phase & Neutral - suitable for 200A The busbar is to be rigidly supported on suitable non-hygroscopic insulating materials of robust ration to with stand electromechanical stress in the event of earth fault. All connection to bus to made by suitable nuts & bolts. The busbar is too wrapped with coloured PVC (Red. Yellow, Blue & Black) for colour identifications. Change Over : a) S & F 415V, 415A 4P Change Over Switch with (open execution type) - 01 (One) no. (Mk. L&T / Siemens / Schneider / ABB)
OUTGOING: (i) 415V 125 Amp TPN SFU with propet HRC fuse (open execution type) - 07 Nos (ii)415V 200 Amp TPN SFU with propet HRC fuse (open execution type) - 01 Nos (Mk. L&T / Siemens / Schneider / ABB) Above all Switch-Disconnector-Fuse Units Conforms to IEC 60947-3, IS/IEC 60947-3; 1.1 Kv grade 50Hz, double break, knife type copper contacts, closed execution type in metallic enclosured electrical power switch heavy duty air break switches and fuses. Terminal Shrouds on both sides and Phase Barriers included.l Door interlock & padlock facility.
READING ARRANGEMENT : a) S & F 3 ph Communicable Multifunction Metering (KWH, KW, KVA, V, I, F, PF) Device (Mk. Schneider - Conzerv / L&T MFM 4410 LED Meter Cl 1 with RS 485 port)) - 1 Sets. c) 400 A / 5A, 10VA, Cl. 1 CT Coil (Mk. AE) - 3 nos. e) LED type indicating lamp ( R Y B / R G) - 3 nos (Mk. Siemens / ABB / Essen) f) 2A "C" curve MCB - 3 Nos. (Legrand / AE / Siemens)
All incoming & outgoing switches are to be housed in respective compartments hinged and gasket doors at the front. All doors should have panel locking arrangement in such a fashion that it can not be on unless the feeder remains in off position. The panel is to be properly gasketed to prevent the dust & vermin. The outgoing feeder connection from respective switches are to be made at side cable alley of panel by means of busbar, copper multi core cables, to be terminated on bolted type terminals for cable connection or on bush insulators for bus bar connection.
The complete panel board is to be installed on suitable brick padestal as directed by the E.I.C. All incoming/outgoing switches is to be properly lebeled on Acrylic sheet as per direction of EIC.
Note: Panel drawing must approved by EIC prior to start the work. Catagory and model of diffrent switches should be approved before to start the work. An Auto Cad Drawing of the panel has to approved by EIC before making of panel. Enclosure shall provide Degree of protection IP - 42 in accordance with IS : 2147 -1962 with its latest ammendment. The Panel box will be fabricated by CPRI approved fabricator. Approval should be submitted along with the drawing.
R.K.ENTERPRISE
GHOSH ENTERPRISE
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .