SPL REPAIRS TO BLDG NO P-01 AND PROVN OF GUARD ROOM NEAR WATER TANK AT MIL STN BHUSAWAL UNDER GE (S) AHMEDNAGAR

Amount

Dismantling of AC sheets (corrugated, semi-corrugated etc) as in roof covering including ridges complete all as specified and as directed.

Demolition of kota stone slabs of any description or thickness in floors, aprons etc.laid, bedded and pointed in any mortar all as specified and as directed.

Demoltion of brickwork or stone/boulder masonry, built in cement mortar, including all quoins, arches, pillars, etc. all as specified and as directed

Dismantling wrought iron or mild steel work of any description and any position all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement morter bedding ( but not backing ), removing rubbish off the premises all as specified and as directed.

Taking down chowkats or frames area not exc 1.5 Sqm each with shutters without taking off shutters from the frame all as specified and as directed.

Taking down chowkats or frames area exc 1.5 Sqm and not exc 4 Sqm each with shutters without taking off shutters from the frame all as specified and as directed.

Taking up or down 15mm bore steel tubing and connections etc. all as specified and as directed.

Taking up or down 20mm bore steel tubing and connections etc. all as specified and as directed.

Surface dressing n. exc 15cm deep in hard/dense soil all as specified and as directed.

Surface excavation n. exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil all as specified and as directed.

Excavation over areas not exceeding 1.5m depth for foundations etc and getting out in soft/loose soil complete all as specified and directed.

Excavation over areas not exceeding 1.5m depth for foundations etc and getting out in hard/dense soil complete all as specified and as directed.

Excavation over areas exc 1.5m but n exc 3m in depth for foundations etc and getting out in hard/dense soil complete all as specified and as directed.

Excavation in trenches, n.exc. 1.5m wide and n.exc. 1.5m in depth; for foundations, etc or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in soft/loose soil complete all as specified and as directed.

Excavation in trenches, n.exc. 1.5m wide and n.exc. 1.5m in depth; for foundations, etc or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in hard/dense soil complete all as specified and as directed.

Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil ( soft/loose/hard/dense soil) complete all as specified and directed.

M&L for loose filling of brick bat of size 80 to 150mm in soak well all as specified and directed.

Removing excavated soil to distance n.exc. 50m and depositing where directed at a level n.exc. 1.5m above the starting point complete all as specified and as directed.

M&L for hard core of broken stone, gauge not exc. 63mm, deposited, spread, levelled and rammed in layers not exc. 15 cm thick, including watering complete all as specified and as directed.

M&L for treating the backfill in contact with foundation at the rate of 7.5 litres of chemical emulsion per square metre on vertical surfaces all as specified and as directed.

M&L for treating the top surfaces of filled earth at the rate of 5 litres of antitermite chemical emulsion per square metre of surface area all as specified and as directed.

M&L for treating the soil under plinth protection at the rate of 5 litres of antitermite emulsion per square metre of surface area all as specified and as directed.

M&L for treating the soil along with external perimeter of building at the rate of 2.25litre of antitermite chemical emulsion per metre of the perimeter wall all as specified and as directed.

M&L for PCC 1:4:8, type D-2 using 40 mm graded stone aggregate) as in foudation, filling and mass concrete complete all as specified and as directed.

M&L for plain cement concrete M-15 (Nominal mix) (using 40mm graded stone aggregates) as in foudation, filling and mass concrete complete all as specified and as directed.

M&L for PCC 1:3:6, type C-2 (using 40 mm graded stone aggregates) as in surface channels and drains etc all as specified and as directed.

M&L for PCC 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered etc all as specified and as directed.

M&L for cement concrete 1:2:4, type B1 (using 20mm graded stone aggregates) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, lacing courses, parapets and railings upto 60 cm in height, copings, apex stones, bed plates etc all as specified and as directed.

M&L for PCC 1:3:6, type C-1 (using 20mm graded stone aggregates) as in bed blocks, bed plates, concrete filling around pipes including necessary formwork all as specified and as directed.

M&L for RCC M-25 (Design mix) as in foundations, including rafts, footings, foundation beams, plinth beams and column bases etc. all as specified and as directed.

M&L for RCC M-25 (Design mix) as in columns all as specified and as directed.

M&L for RCC M-25 (Design mix) as in beams, cantilevers, bressummers, lintels over 1.5m span all as specified and as directed.

M&L for RCC M-25 (Design mix) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs all as specified and as directed.

M&L for RCC M-25 (Design mix) as in fins, fascias, louvers, parapets, and railings exc 60cm in height, newels, balustrade all as specified and as directed.

M&L for brickwork with subclass ‘B’ bricks, old size, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and as directed.

M&L for brickwork with subclass ‘B’ bricks , old size, straight or curved on plan exc 6m mean radius built in half brick thick walls built in cement mortar 1:4 all as specified and as directed.

M&L for 40mm thick PCC 1:2:4, type B-0 (using 12.5 mm graded stone aggregates), mixed with water proofing compound as per manufacturer's instructions as in damp proof course including painting on top with the blown bitumen 85/25 penetration at the rate of 1.0 Kg per square meter over polyethylene film of 200 micron and necessary formwork all as specified and as directed. (Note: Supply only WPC shall be measured and paid separately)

M&L for forming jambs, etc. to openings including cutting, toothing and properly bonding into old work, also facing, jointing and pointing/ plastering to match existing work in cement mortar 1:6, complete all as specified and as directed

Use and waste of formwork to sides of concrete of foundation, footing, bases of column, raft and raft beams, sides and soffits (if any) of foundation and plinth beam and similar work for rough finished surfaces etc.complete all as specified and as directed.

Use and waste of formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or batter for flat, rough finished surfaces all as specified and as directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for flat, rough finished surfaces all as specified and as directed.

Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. for flat, rough finished surfaces all as specified and as directed.

Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions for flat, rough finished surfaces all as specified and as directed.

M&L for 35 mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares with plain chamfered or rounded, mitred and rebated sash bars , edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats all as specified and as directed.

S&F 30mm thick factory made flush shutters, solid core construction, with block board and plywood face panels, commercial type on both sides all as specified and as directed.

M&L for 1st class hardwood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours; articles n exc 200Cu.cm. each all as specified and as directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ ceosetory windows & other frames/ chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed stainless steel screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (face) & 1100 N (edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with mild steel hold fast/ lugs/stainless steel dash fasteners of required dia and length complete all as specified and as directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35 mm size comprising of virgin polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (face) & 900 N (edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face all as specified and as directed.

S&F factory made, solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain moulded PVC sheet polyurethane painted on the front face & 2mm prelam PVC sheet on back face , as per specification & drawing all as specified and as directed.

S&F 100mm size mild steel butt hinges, medium weight, cold rolled and fixed all as specified and as directed.

S&F 200 mm size aluminium anodised, barrel tower bolts of extruded section and fixed all as specified and as directed. .

S&F 75 mm size aluminium anodised, barrel tower bolts of extruded section and fixed all as specified and as directed. .

S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodised all as specified and as directed.

S&F 300 mm long aluminum alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of steel, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy complete all as specified and as directed.

S&F brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges and fixed all as specified and as directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and as directed.

M&L for framed work such as grills grating etc with end of bars shoulderd and/or riveted .welded or forged into spikes.framedguard bars iron doors.ladders framed balusters , walk ways. railings, frame work of water tanks and similar work conforming to Fe 290 Gde E-165 all as specified and as directed.

S&F mild steel bands, straps, supports or stays, clamps, hold fasts and similar small articles conforming to Fe 410-0 or Fe 310-0 all as specified and as directed.

S&F mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia all as specified and as directed.

All as per serial item No 61 but 6mm to 8mm dia.

All as per serial item No 61 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed.

S&F rolled mild steel sections as in main and cross beams, hip and jack rafters: purlins where connected to common rafters and running rails fixed with angle cleats or other connecting plates, conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

S&F factory made, mild steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and as directed.

S&F factory made, mild steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete without glazing bars, dovetailed or welded complete all as specified and as directed.

S&F factory made mild steel ventilator with top hung shutter including hinges, steel peg stay and steel handle complete all as specified and as directed.

S&F pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed.

M&L for mild steel work as in wind ties for roof including securing bolts complete including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde-E-165 complete all as specified and directed.

M&L for anodised aluminium snap grid framework for false ceiling, size of grid 605 x 605 mm, including 4mm dia GI wire hangers at 1.2m centres, 4mm thick, non asbestos fibre designer cement building boards (decorative type), fixed or laid/ inserted to aluminium framework/grid including dismantling and taking down existing false ceiling (framework, boards, hangers, cover fillets etc) complete all as specified and as directed.

S&F prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, colour and design as approved by GE complete all as specified and as directed.

S&F prepainted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridges, hips, valley gutters, drip and straight flashings fixed with self tapping screws as specified colour and design as approved by GE complete all as specified and as directed.

M&L for water proofing treatment to RCC roof slab, parapet, chajja etc comprising with the following treatment/specification from bottom to top (i) Screed bed or bedding layer of 10 mm thick cement mortar 1:3 with mixing of WPC @ 3% by weight of cement, finished even and smooth without using extra cement (ii) Cleaning of plastered roof surface and applying one coat of cold bituminous primer @ 0.30 ltr /Sqm conforming to IS:3384-1986. (iii) APP based polymeric membrane 3mm thick (minimum), weighing 3.5 Kg/sqm reinforced with polyester non woven fabric (weighing not less than 150 gms/Sqm) shall be applied over bituminous primer as specified above by torch application. The overlaps shall be minimum 100mm on the transverse direction and 75mm on longitudinal direction. (iv) Applying two coat of aluminium paint over the APP modified membrane @ 0.11Kg/sqm. Note: Water proofing compount will be measured & paid seperatly.

Supply only water proofing compound complete, ISI mark all as specified and as directed.

M&L for 75mm thick, PCC 1:4:8, type D-2 (using 40mm graded stone aggregates) as in sub base complete all as specified and as directed.

M&L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and as directed.

M&L for 20-25 mm thick machine cut kota stone flooring (size of kota stone slab 22"x22") laid over and including 20 mm thick bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match including cutting, rubbing and mirror finish polishing including removing dust etc complete all as specified and as directed.

M&L for 20-25 mm thick machine cut kota stone slabs on vertical surfaces like risers to steps, skirting etc with and including 10mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match including cutting, rubbing and polishing including removing dust etc complete all as specified and as directed.

M&L for coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular), area of each tile exc 0.06sqm but not exc 0.11 sqm as in floors etc. with and including 15mm thick screed bed in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for coloured glazed ceramic tiles of size 450mm x 350mm x 7 mm thick on vertical surfaces, with and including 10mm thick backing coat in cement mortar 1:4, set & jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles complete all as specified and as directed.

M&L for vitrified tiles, 10mm thick, light shade (square / rectangular) polished area of each tiles not exc 0.36 Sqm in floor etc set and jointed in near cement slurry and pointed in white or coloured cement to match with and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

M&L for chequered cement concrete tiles of size 200mm x 200mm x 25mm thick with grey cement and pigments , laid over and including 15mm thick screed in cement mortar 1:6, set, jointed and pointed in neat ement slurry in floors complete all as specified and as directed.

M&L for 10mm thick rendering on other than fair faces of brick work or concrete surfaces (internal surfaces of walls) in cement mortar 1:6, finished even and smooth without using extra cement all as specified and as directed.

M&L for 15mm thick rendering in two layers on fair faces of brick work or concrete surfaces (external surfaces of walls) first layer of 10mm thick in cement mortar 1:6 and second layer of 5mm in cement mortar in cement mortar 1:4 mixed with WPC as per manufacturer's instructions, finished even and fair all as specified and as directed. (Note : Supply only WPC shall be measured separately)

M&L for 5mm thick rendering on fair faces concrete ceiling surfaces in cement mortar 1:3 all as specified and as directed.

M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whitening primer all as specified and as directed.

M&L for preparation of newly plastered or unplastered surfaces of ceiling and applying three coats of white wash all as specified and as directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer all as specified and as directed.

M&L for preparation of old surfaces of wall and applying one coat of distemper oil emulsion white or tinted all as specified and as directed

M&L for preparation of old surfaces of wall and applying one coat of cement paint white or tinted all as specified and as directed

S&F 3 mm thick plain sheet glass and glazing with oil putty in square n exc 0.5 Sqm in each pane to steel windows including glazing pins etc. complete all as specified and as directed.

S&F 3 mm thick frosted sheet glass and glazing with oil putty in square n exc 0.5 Sqm in each pane to steel windows including glazing pins etc. complete all as specified and as directed.

M&L preparation of new wood and wood based surfaces of any description not otherwise described exc 10cm width or girth and applying two coats of synthetic enamel paint on over a coat of pink primer all as specified and as directed.

M&L for preparing surfaces of wood and wood based materials, steel and iron work, new or old treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc., area n exc 0.1 sqm each and treated with tar or coal tar black paint all as specified and as directed

M&L sanding newly tarred or painted surfaces with clean sharp sand all as specified and as directed

M&L preparation of new steel or iron surfaces of any description not otherwise described exc 10cm width or girth and applying two coats of synthetic enamel paint on over a coat of red oxide primer all as specified and as directed.

M&L for preparation of old painted surfaces of steel and iron of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint all as specified and as directed.

M&L for preparing old painted steel or iron surfaces of any description not exc 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

S&F vitreous china wash hand basin, white, flat back, size 550 mm x 400 mm, including brackets, pillar tap 15 mm bore chromium plated, fancy type, cast copper alloy with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks, 32 mm dia waste coupling brass chromium plated with long screwed shanks and fly nuts, 32mm size brass chromium plated bottle trap inlet and outlet screwed for pipe or connections including necessary packing union and cap, PVC waste pipe,15mm dia PVC connection pipe complete all as specified and as directed.

S&F vitreous china wash down water closet (Pedestal pattern) including connection to drain (or outgoing pipe) and flushing pipe, anti syphonage pipe, trap set and including white or black seat cover for pedestal pan with mild steel chromium plated aluminium hinging device, fixed to pan with suitable screws etc complete all as specified and as directed.

S&F vitreous China squatting pan, ‘Orissa’ pattern, size 630 mm x 450 mm white, with integral foot rests with and including 10 litre capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets all as specified and as directed

S&F 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S&F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S&F 75mm dia PVC (SWR) bends any radius with access door complete all as specified and as directed.

S&F 110mm dia PVC (SWR) bends any radius with access door complete all as specified and as directed.

S&F 110mm dia PVC (SWR) junction (single T) any radius, equal or unequal with access door complete all as specified and as directed.

S&F 110mm dia PVC (SWR) vent cowl complete all as specified and as directed.

S&F 32mm dia UPVC pipes of pressure rating 10kgf/sqcm fixed complete to walls, ceillings or in floors etc. all as specified and as directed.

S&F 100mm dia grating doom of PTMT complete all as specified and as directed.

M&L for PVC (SWR) floor trap, 75 mm dia of outlet, plain with grating including jointing with solvent cement complete all as specified and as directed.

M&L for PVC ( SWR) gully trap 125/110 mm ,setting and jointing with solvent cement complete all as specified and as directed..

M&L for 15mm bore GI tubing medium grade with all fitting and fixed complete on walls and ceilings or laid in floors etc complete all as specified and as directed.

M&L for 20mm bore GI tubing medium grade with all fitting and fixed complete on walls and ceilings or laid in floors etc complete all as specified and as directed.

M&L for 25mm bore GI tubing medium grade with all fitting and fixed complete on walls and ceilings or laid in floors etc complete all as specified and as directed.

M&L for 40mm bore GI tubing medium grade with all fitting and fixed complete on walls and ceilings or laid in floors etc complete all as specified and as directed.

M&L for excavation in trenches in any type of soil, returning filling and removing surplus soil, cutting of existing 80mm dia GI pipes and reducing to required length before laying in position including insertion of new all socketed Tee size 80/80/40mm branches etc with and including providing 40mm dia gate valve complete all as specified and as directed.

S&F angular stop valves, 15mm dia, cast copper alloy, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directed.

S&F bib tap, 15mm dia cast copper alloy chromium plated, with crutch or butter- fly handles screwed down for iron pipe or for brass ferrule complete all as specified and as directed.

S&F 15mm bore gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed

S&F 25mm bore gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), 1000 litres capacity, tripple layered, hoisted and fixed in position including 15mm bore ball brass valves, high pressure, with polythene float and flynut screwed to iron pipe and connecting with connected fittings complete all as specified and as directed.

S&F in repairs, rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), 500 litres capacity, tripple layered, hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to iron pipe and connecting all as specified and as directed.

S&F PVC connection, 15mm bore with PTMT nuts of length 450 mm complete all as specified and as directed.

M&L for 150 mm internal dia, reinforced concrete pipes with collars, class NP2, laid and jointed complete all as specified and as directed.

M&L for cement concrete 1:4:8, type D-2 using 40mm graded stone aggregates for bed to 150mm bore drain pipes including packing under and haunching against the sides of pipes after they are laid and tested all as specified and as directed.

M&L for RCC hume pipe septic tank, made out from 600mm bore hume pipe, conventional type designed to carry sewage and sludge water etc of capacity 10 users and fixed/placed in position all as per manufacturers instructions including excavation and earthwork in any type of soil complete all as specified and as directed

M&L for construction of valve pit/chamber of Internal dimensions 600 mm x 600 mm x 600 mm, using PCC 1:4:8, type D-2, using 40mm graded stone aggregates for foundation, 23 cm thick, brick wall built in cement mortar (1:4) ,15 mm thick rendering all around the brick work in cement mortar (1:6), 75 mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregates in coping including necessary form work, 3coats of white wash on rendered surfaces and on coping, 2 mm thick mild steel top sheet cover with frame made out of 40x40x6 mm angle iron, locking arrangement, including painting of steel surface with two coats of synthetic enamel paint over a coat of red oxide primer, excavation and earthwork in any type of soil and clearing the debris complete all as specified and as directed.

Supply, laying, jointing and testing PVC XLPE, LT, insulated armored heavy duty electric cable with aluminum conductor, 1100 volt grade, cross sectional area 16 Sqmm, 4 core, laid in trenches/ fixed on wall including electric connections on both ends with suitable lugs,binding wire all as required at site all as specified and as directed

Supply, laying, jointing and testing PVC XLPE insulated armored heavy duty electric cable with aluminum conductor, 1100 volt grade, cross sectional area 70Sqmm 3.5Core laid in trenches/ on wall including taking out existing cable complete all as specified and as directed.

Supply and spreading sand for cusioning for electric cable 8 cm below the cable and 15 cm above the cable, hand punned to total thickness of 18 cm complete all as specified and as directed. Note : Punned thickness only will be considered for payment.

Supply and laying in replacement of unreinforced precast concrete cable cover class LV type-1 flat size 250 mm x 150 mm x 40 mm complete all as specified and as directed.

S&F of galvanised iron tubing light grade of 50mm bore for cable protection on pole/wall/floor/ or in trenches and drain etc complete with necessary clamp, nut, bolts and washers and socket and making good the disturbed surfaces of wall, floor or roof etc all as specified and as directed

S&F HDPE DWC flexible pipe, 75mm dia as per IS 16205 Part 24:2017 for LT/HT cable protection complete etc all as specified and as directed

Taking down carefully copper/Aluminum point wiring (Light, Fan, Socket or power) complete fitting such as switches, ceiling, regulator, sockets, light fittings, DBs etc and making good disturbed surfaces of walls, floors etc all as specified and as directed

M&L for concealed point wiring with 1.5 Sqmm single core FRLS(H) ,multistranded ,copper conductor fire retardant,PVC insulated and unsheathed cable 650/1100 volts grade, confirming to IS-694 1990,with copper earth continuity wire for PVC insulated of size 1.5 Sqmm, drawn through and including PVC Conduit of size 25mm / 20 mm dia with all accessories as specified with modular cover plate , modular frame and metal flush boxes,blank plate for mounting fitting & fixtures like switches sockets and fan regulators etc for one light/fan point controlled by one way switch complete all as specified and as directed.

All as per serial item No 138 but for one 3 pin socket outlet 5 Amps on same board with other switches

All as per serial item No 138 but for one 3 pin socket outlet 5 Amps on Independent board

All as per serial item No 138 but for power point 5/6 pin Socket outlet 15 Amp with PVC copper conductor cable multistrand unsheathed 4.0 Sqmm on independent board

M&L for point wiring (Light Point/fan Point) complete with 1.5 Sqmm single core, multistranded, copper conductor FRLS, PVC insulated and unsheathed cable 650/1100 volts grade, confirming to IS-694 1990,drawn through and including PVC Casing Capping of size 25 mm /20 mm dia with all accessories as specified with modular cover plate with frame and modular metal flux boxes/rectangular PVC board for mounting fitting & fixtures like switches sockets and fan regulators etc including copper earth continuity wire for PVC insulated of size 1.5 Sqmm for one light Point controlled by one way switch complete all as specified and as directed.

All as per item No 142 but for 5 Amps Socket in same Board with 1.5 sq mm cable complete all as specified and as directed

All as per Item No 142 but for 5 Amps Socket in independent board with 1.5 Sqmm Cable complete all as specified and directed by Engr in Charge.

All as per item No 142 above but for power point 3 pin switch socket 15 Amp with PVC copper conductor cable multistrand unsheathed 2.5 Sqmm on independent board including one run 1.5 Sqmm multistrand PVC copper conductor cable for earth continuity in and including PVC casing and capping fixed on wall incl including PVC box 2 mm complete all as specified and as directed

S&F modular switch, single pole, one way, 6 Amps, 1 module complete all as specified and as directed

S&F modular switch, single pole, one way, 16 Amps, 1 module complete all as specified and as directed

S&F modular socket, 6 amp, 2/3 pin combined, 2 module complete all as specified and as directed.

S&F modular socket, 6 A/16 Amp, 2/3 pin combined, 2 module complete all as specified and as directed.

S&F ceiling rose, surface bakelite, three terminal type complete all as specified and as directed

S&F lamp holder, PVC/Polycarbonate type with back plate suitable for batten/pendant fitttings complete all as specefied and as directed

S&F LED lights fitting 1x 18W, 220V, AC, decorative box type with driver, holder including LED tube light, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S&F LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed.

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC, decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F lamp LED 9/10 Watt, 230 volts 50 Hz AC complete all as specified and as directed.

S&F sheet metal enclosure (Factory made), double door shutter type for distribution board (when MCBs are to be used), single pole and neutral, 240 volts, 8 way, protection class IP-42, suitable for fixing MCBs, Isolators etc, confirming As per IEC 61439-3, suitable for flush mounting and surface mounting, with 100 Amps rated copper busbar, with Neutral bar, Earthbar and cable alley for cable managment, fully shrouded, Neutral bars, prefittes masking sheet complete all as specified and as directed.

S&F in repairs, 35/40 watt building mounted LED security light fitting complete made up of pressure die cast housing with toughned glass and individual high power LEDs with secondary optics, IP66 protection and impact resistance of IK07 & 10KV external SPD, including GI bracket made out of GI pipe 40/50 mm bore, medium grade pipe 1.2 m long bend to shape required fixed to pole / wall with 02 Nos MS clamps made out of flat iron 40 x 5 mm including nuts, bolts and washer, painting with two coats aluminium paint over a coat of primer, suitable for LED fitting, complete all as specified and as directed

S&F exhaust fan 300mm sweep, made of sturdy engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding complete electric connection with suitable size of copper wire including making hole of size 300 mm dia in any type of wall and making good to match the surrounding area/ plywood packing work as per site reqirement all as specified and as directed

S&F ceiling fan, 1200mm sweep with blades, down rods, electronic regulator and accessories, 230 V, minimum air delivery 210 CFM with service value 6.00 BEE five star rated with brushless direct current motor (BLDC) including electric connection with suitable size of copper wire complete all as specified and as directed.

S&F in replacement, MCB DB double door 4 way TPN with suitable rated busbar 415 V complete all as specified and as directed

S&F in replacement, MCB DB double door 12 way SPN with suitable rated busbar 240 V complete all as specified and as directed

S&F in replacement, of Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amp 240 Volts complete all as specified and as directed

S&F MCB SP, AC 240 V, 6 to 32 Amps, 10 KA capacity ,'c' series, making connection with suitable size of copper lugs etc complete all as specified and as directed.

S&F MCB single pole & Neutral (DP) 240 volts 40-63 Amps "C" curve complete all as specified and as directed

S&F MCB TPN 415 volts 100 Amps "C" curve complete all as specified and as directed

S&F MCCB, 415 Volts, 16KA breaking capacity, 4 pole, 100Amps complete all as specified and as directed

M&L for sub main wiring with 2 runs of 4.0 sqmm, single core, PVC insulated & unsheathed cable, conforming to IS-694, 1100 volts with copper conductor, multi stranded, drawn in and including suitable size PVC Casing Capping (ISI marked) with all accessories such as Tees, Elbows, junction box etc as requied alongwith one run of 4.0 sqmm single core PVC insulated & unsheathed copper conductor as continuous earth wire dolly and connecting to existing main switch board / distribution board of each building as ordered and testing on completion including taking down old submain wiring and any type of casing/caping/Conduit, complete all as specified and as directed. Note : Three runs of 4.0 Sqmm cable and one run of PVC casing/caping will be measured as one unit.

M&L for earthing complete with galvanized steel earth plate electrode 60 cm X 60 cm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level, connecting to the GI wire 4 mm dia , by means of nut bolts, check nuts and washer of the GI . Earth wire connected upto main earth point/DBs alongwith 15mm dia GI pipe, medium grade, including provision of concrete pit in PCC (1:2:4) type B-1 using 20 mm graded stone aggregates with 40 mm thick RCC (1:2:4) cover with reinforced with XPM (weight not less than 4 Kg / Sqm) and frame of angle iron 25mm X 25 mm X 3mm with lugs 2 Nos and with 6 mm dia MS bar handle made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, test point made out of phosphorus bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding than 50 mtr, all as per electric plate No 3 of SSR Part I 2009 and connection to earth test point all as specified including testing on completion.

Bhirud Electric Stores

M/S H.N.ENTERPRISES

CHAUDHARY AND ASSOCIATES