WBPHED/63_01/EE/BOLMD/24-25

Amount

Clearing compound premises of shurbs, plants, jungles etc. by cutting and removing as directed (Specific permission of Engineer in-Charge prior to execution will be necessary).

Cutting chase upto 125 x 150 mm. and subsequent mending of damages. (a) In brick wall [cement 3.6 kg per mtr.]

Labour for chipping of concrete surface etc.

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, as per relevant IS codes. Pakur variety (a) In ground floor

Roof treatment by application of Non Toxic polyurethene modified acrylic based single component base etc.

Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S./ W.I. gate etc. with point welding at not more than 150mm apart complete in all respect as per design including cost of all labour and materials .

Supplying fitting and fixing in position approved P.V.C. door frame (Matt finish) made of extruded P.V.C. multichamber hollow section having dimensions 60mm x 50mm x 2mm (+/-0.2mm), horizontal section will be joined with vertical section by galvanised steel screws after inserting two number steel brackets as reinforcement making suitable space for placing hinges, one steel tube 40mm x 20mm x 1.20 mm will be inserted on one full vertical side of the frame (hinge side) as reinforcement, the frame will then be fixed in the opening with the help of P.V.C. expandable fastner/wooden gutties and galvanised steel screws including cost of all materials and labour, hire charges of tools and appliances, carriage of all materials, taxes and all other incidental charges complete.

PVC Door Shutter-37 mm thick.: Supplying fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C. multicavity hollow chamber of suitable size and section with 2.0 mm (+/-0.2 mm) wall thickness, the section will have 2nos. built in beads, horizontal & vertical section shall be fixed to each other by self tapping screws and 2 nos. of solid plastic or M.S. tubular galvanised brackets of length 200mm x 80mm and other 100mm x 100mm both 1.20 mm in each corner of the shutter frame for placing hinges. Polymer based multicavity hollow section of 105 mm x37mm with 2.0 mm (+/- 0.2 mm) wall thickness will be fitted in the middle as lock rail reinforced by solid polymer bar of 200 mm long at both ends abd screws from both sides. The section frame will then be fitted in by PVC panels of size 100 mmx20 mm with wall thickness of 1.2 mm (+/- 0.2 mm) and 2 nos. of 6 mm dia and screws from both sides 6mm dia bright rod will be inserted horizontally with both side check and nut system and stretches where fixing of hinges / hasp bolt / tower bolt / door ring are required to be strong enough to with stand wear and tear. The rate is inclusive of cost of all materials, labour and hire of tools and plants and appliences, carriage of all materials taxes and all other incidental charges complete. The rate is exclusive of cost of hinges, hasp bolt, tower bolt, door ring etc. (i) In ground floor

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints incl. throating, nosing & drip course, scaffolding/staging where necessary (ground floor) [excluding cost of chipping over concrete surface] A. In ground floor (i) With 6:1 cement mortar (b) 20 mm. thick plaster

(c) 15 mm. thick plaster

(ii) With 4:1 cement mortar (b) 15 mm. thick plaster Ceiling

Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.

Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. a) Depth of excavation not exceeding 1500 mm

Neat cement punning about 1.5 mm thick in wall, dado, window sills, floor, drain etc. (Note: Cement 0.152 Cu.m. per 100 sq.m.)

Uprooting and removing plants from the surface of walls parapet etc and making good damages. Repairing of damages to be paid separately. (a) Small plant otem upto 75 mm. --- 1 x 95 Nos.

(b) Medium size plant of girth of exposed stem above 75 mm. but not exceeding 150 mm. lift upto 6 mtr. --- 1 x 55 Nos.

Applying 2 coats of bonding agent with synthetic multi functional rubber emulsion having adhesive and water proofing properties by mixing with water in proportion (1 bonding agent : 4 water : 6 cement) as per Manufacturer's specification.

Labour for taking out door and window frame including shutter for repair or replacement of different parts of the frame & refixing the same including mending good all damaes complete. (Concrete and brick work for mending damage will be paid separately) (a) Upto area 2.5 Sq.m

Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. (vi) 100 mm x 50 mm x 1.25 mm ---- 1 x 72 Nos.

Iron socket bolt of approved quality fitted and fixed complete (b) 100 mm long x 10 mm dia bolt --- 1 x 12 Nos.

(d) 225 mm long x 10 mm dia bolt --- 1 x 5 Nos.

i) Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting. (c) 300 mm long

Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed (a) With continuous plate base (Hexagonal / Round rod) (ii) 100 mm grip x 10 mm dia rod. --- 1 x 4 Nos.

Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). Sal : Local (i) In ground floor

Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately) (b) 40 mm x 6 mm, 200 mm length --- 1 x 54 Nos.

Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings. 35mm thick shutter with 19 mm thick panel of size 30 to 45 cm - Sisu, Gamar, Champ, Badam, Bhola, Mogra, Hallak (i) In ground floor

Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete (In all floors for internal wall & upto 6 m height for external wall) (i) 3 mm thick (weighing 7.4 kg/sq.m)

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (a) One coat (ii) Solvent based interior grade Acrylic Primer

Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats) (ii) Luxury Quality

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. One Coat (a) In ground floor

Protective and Decorative Textured exterior high class matt finish paint of approved quality, composed of special Tharmoplastic Resin containing fine crystalline additives derive from Granite as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. (a) 2 coat - In ground floor (Quantity same as item no. 26)

(b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

(a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. Grill

Removing loose scales, blisters etc. from old painted surface and thoroughly smoothening the surface to make the same suitable for receiving fresh coat of paint.

(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (a) On timber or plastered surface With super gloss (hi-gloss) (iv) 2 coats (with any shade except white)

(b) On steel or other metal surface With super gloss (hi-gloss) (iv) 2 coats (with any shade except white)

Renewing X.P.M. including taking out and refixing with new battens made of local wood of size 50mmx25mm and new screws etc. complete. (a) 25 mm x 75 mm strand 3.25 mm x 1.6 mm

M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs. (Add extra @ 1% for each addl. floor upto 4th floor and @ 1.25% for each addl. floor above 4th floor) Grill weighing above 10 kg/sq.m and upto 16 kg/sq.m

Labour for lowering plastic water storage tank and stacking in places as directed. (i) Upto 1500 Lit capacity (a) From 1st floor to GL --- 1 x 2 Nos.

Labour for punching hole in plastic water storate tank upto 50 mm dia --- 1 x 10 Nos.

Supplying, fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. (iii) 600 mm long --- 1 x 2 Nos.

Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets. (a) Sink only (i) 530 mm X 430 mm x 180 mm --- 1 x 2 Nos.

Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 A.(i) Single socketed 3 Mtr length (b) 110 mm dia --- 1 x 22 m

Labour for fitting and fixing UPVC pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or RC floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 meter and refilling the same complete as per direction of the Engineer-in-Charge. (Payment will be made on centre line measurement of the total pipeline including specials.(A) Above ground (ii) 110 mm dia. --- 1 x 22 m

Supplying, fitting & fixing bib cock or stop cock. (e) PTMT (Polytetra Bib Cock / Stop Cock (Prayag or equivalent) 15 mm --- 1 x 7 Nos.

Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc. --- 1 x 2 Nos.

Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer

(a) 500 Litre capacity --- 1 x 1 No..

(b) 750 Litre capacity --- 1 x 1 No.

Labour for hoisting plastic water storage tank (i) Upto 1500 litre capacity

(a) Upto 1st storey from GL --- 1 x 1 No.

Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc. (a) With "P" trap --- 1 x 2 Nos.

Supplying, fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete. (i) Polythene flush pipe --- 1 x 2 Nos.

Supplying, fitting & fixing UPVC pipes A-Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete. (B) UPVC fittings (a) Plain Tee

(ii) 110 Dia. --- 1 x 2 Nos.

(c) Bend 87.5 degree (ii) 110 Dia. --- 1 x 6 Nos.

Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. (a) For Exposed Work (i) CPVC Pipes Class-1, SDR-11

15 mm dia --- 1 x 15.00 m

25 mm dia --- 1 x 42.00 m

Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling,15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials.

(i) With Pakur variety (Other manufacturers not specified) -- 1 x 2 Nos.

Supplying, fitting and fixing cast iron 'P' or 'S' trap conforming to I.S. 3989/2009 and 1729/2002 including lead caulked joints and painting two coats to the exposed surface. (Painting to be paid separately). (A) 'P' trap

(iii) 100 mm --- 1 x 2 Nos.

Making internal electrification of house consisting of 1no. Ceiling fan point, 2nos. tube light & 2nos. LED bulb point, 1no. bulk head point and 2nos. 40W LED with arm bracket at outside and one three pin plug point incld. supply of all necessary materials (approved make Ceiling fan, Lamps & fixture etc.) to complete the work as per IE rules, wiring with 2.5 sqmm / suitable gauge copper wire within PVC casing, PVC switch board etc as per direction.

Add: @ 18% GST of Sl. No:1.00 to Sl. No: 49.00

Add: @ 1% Cess of Sl. No:1.00 to Sl. No: 50.00

HINDOL ROY (BID ID -5964634)

EASTERN INDIA SALES AND SERVICE (BID ID -5968805)