Construction Of Anganwadi Building At Hiwara (KH) Tq Ambjaogai Dist Beed

1 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Manual Means Bd.A.1 Page No. 259 Cubic (E-DSRI.No.21.01Page No.153)

2Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift| upto 1.50 m) By Manual Means Bd.A.2 Page No.259 Cubic (EDSR I.No.21.05Page No.153)

(3)Provinding soling using 80 mm size trap metal in 15 cm layer including filling coids with crushed sand / grit ramming watitering etc . Complete . As directed by Enigneer in charge (DSRI . NO. 21.40 P194)

4 provinding and laying in situ , cement concrete in M10 of tsp/ grsnit/grsnite / quartzite / ganeiss metal for foundation and bedding including bailing out water formwork , compaction and curing complete , with fully autopaction micro processor based PLC with SCADA enabled reversible Drum type mixer with natural sand Bd E 1 page No 287 (SSRI NO 24.01 P 132

5 Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. Bd.A.11 Page No. 263 (DSRI.No.21.36P.No194)

B) with contractors materials

6.Providing and laying in situ cement concrete M20 of trap granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C.work foundations like raft strip foundation grillage and footing of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, cover blocks compaction and curing roughening the surface if special finish is to be provided ( Excluding reiforecement and structural steel ) etc complete with fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer with natural sand Bd F 3 Page no 298 and B7 ( SSRI NO 25.11 Page No 178 )

7.Providing & casting in situ cement concrete M20 of trap /granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs & drawings or as directed including centering, formwork, cover blocks compaction finishing the formed surfacewith cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc .complete . ( Excluding reinforcement and structural steel). With fully automatic micro processor based PLC with SCADA enabled reversible drum type concerete mixer with Natural and Bs .F 5Page no

8 Providing and casting in situ cement concrete M20 of trap/granite / quartzite/ gneiss metal for R.C.C. beams and landings canopy as per detailed designs and drawings including centering, formwork, cover blocks compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel). With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand. Bd. F.8 Page No. 300 and B.7, Page no 38 (SSRI. No.25.50 Page No. 181

9 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including centering, formwork, cover blocks compacting finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural curing. steel) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Bd.F.9 Page No. 303 and B.7, Page No.38(E dSR I.No.26.05P184)

10 Providing and casting in situ cement concrete M20 of trap/ granite quartzite/ gneiss metal for R.C.C. slabs and landings canopy as per detailed designs and drawings including centering, formwork, cover blocks compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel). With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand. Bd.F.8 Page No. 302 and B.7,(SSRI.No.25.70Page No.182

11 Providing and fixing in position TMT FE 500bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. a) For TMT Fe 415 steel bars (If Mild Steel/HYSD steel is to be used prior permission from S.E. should be taken) Bd.F.17, Page No. 306 (E-DSR 1.No.26.33P.233)

12.Providing second class Burnt Brick masonry with conventional I.S. type bricks in cement mortar 1.6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete (DSRI.No. 27.05P242)

13 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete(DSRI.No.27.05P242)

(14) Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal inforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete. Bd.G.7 Page No. 316 (DSRI.No.27.06P233)

15) Providing and laying telephone black Amba White Cadburybrown/Ruby red Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing,

(16)Providing and fixing in position. (as per I.S.1868/1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 Kilogram/Running metre. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 Kilogram/Running metre. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 Kilogram/Running metre. The (SSRI.No.39.37Page No.310

Providing and fixing solid core flush door commercial type on single leaf 16 mm thick Bison Panel cement bonded particle Board including Teak wood lipping beading on all four edges without ventilator commercial type of exterior grade as per detailed drawings with wrought iron hold fast, stainless steel fixtures and fastenings and handles on both sides and finishing with oil painting three coats complete.(SSRI.No.39.11P246)

17Providing and fixing acrylic plastic sheet panels of approved quality in required thickness plain clear or any colour or obscured linings in lieu of glass pans to doors/windows including providing and fixing clips. putty etc. complete. (a) 2.00 mm thick. (DSRI.No.39.60P..No.188)

18 Providing and laying vitrified mirror glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. und make shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. (EDSR IN.33.40P126)

19Providing and laying vitrified mirror/glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 (group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete(SSRI.No.33.41PageNo.160)

20 Providing and fixing Orrisa type white glazed earthenware water closet pan with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall without flushing cistern with flush cock and with water Jet and necessary fittings including cutting and making good to the walls and floors testing etc. complete. (prior approval of sample and brand by Ex. Engineer is necessary before use) Specfications (DSRI.No.42.30P.No.203

21)Providing and fixing white glazed earthenware Wash Hand Basin of 45cm x 30cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete. Bd.V.30 Page No. 565(E-DSRI.no.41.64 P.199)

22.Providing and fixing black kadappa stone as shelves 25mm. thick machine polished, extending the polish upto 20 cm width on lowerside, rounding corners, laying in position jointing with bedding cement mortar 1:4 proportion curing etc etc. complete. Bd.M.29 Page No. 391 (DSRI.No.33.23 P158

23 Providing soak pit of size 120cm x 120cm x 120cm including excavating and filling with brick-bats. (E-DSRI.No.42.19P202)

24.Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc complete. Bd.L.1 Page No. 367 Square Metre(E-DSRI.No32.01PNo.209

25.Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. Bd. L.2 Page No. 368 E-DSR Item No.32.03 Page No. 209)

26Providing internal cement plaster 20mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. Bd. L.2 Page No. 368 Square Metre (E-DSRI.N.32.04P209)

26Providing and applying two coats of lead/zinc base oil paint/ bituminious paint of approved colour to new structural steel work and iron work in buildings including scaffolding if necessary, cleaning and preparing the surface etc. complete. (excluding primer coat). (EDSR I.No.35.01P223)

27 Providing and applying whitewash in two coats on old new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing & brooming down etc. complete. Bd. P. I Page No. 411 (E-DSRI.No. 36.03 Page No.227

28 Providing and fixing mild steel grill work for windows, ventilators, etc. 20 kg/sqm as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. Bd.U.1 Page No. 537 Square Metre(E-DSR I.No.40.01P193)

29Providing and fixing on walls/ ceiling/ floor 15 mm dia. G.I. pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. BD.V 5 page 551 and as directed by Engineer in charge Running Metre(E-DSRI.No.42.10P266)

30 Providing and laying intrenches 20mm dai.CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete.Includingremoving existing pipelineif necessaryandconveyingandstacking same in PWD chowky or as directed etc. complete.(E-DSR.No.42.62P206)

31Gun Metal stop tap with crutch wheel 15mm Supplying of materials (SSRI.No.41.44P198)

32 Painting letters upto 20 cm height complete brushes, coir brushers, dusting, cleaning, including cost of paint etc. complete.ESSR I.No.6.05P83

Add G.S.T. 18 %

Roylty Sand

Roylty Murum

cement concrete comprasive satrength

B.b.Momasonary

Add 1% Labor Insurance

Please Enable Macros to View BoQ information