Speical repair of 50 Nos T 3 Houses Old Colony RSD Shahpurkandi TShip

Amount

Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled.

Doors of area 3 sqm and below.

Window of area 3 Sqm and below.

Supplying Pressed steel sheet frames (chowkhat) consisting of 18gauge (1.25 mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specification including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality, fixed in position including the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs complete.(a) Doors and windows frame of size 151mm x 60mm with 35 mm wide double rebate weighing 3.95 kg per meter.

Supplying Pressed steel sheet frames (chowkhat) consisting of 18gauge (1.25 mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specification including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality, fixed in position including the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs complete (b) Doors and windows frame of size 113mm x 60mm with 35 mm wide single rebate weighing 3.38 kg per meter.

Providing and laying vitrified floor tiles in different sizes in light colour shades made using Soluble Salt Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. (Soluble salt Print Penetration should be upto 1 to 2 mm after the tiles are fired & polished) (a) Size 600x600 mm

Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/ Highly Gloss finish/ Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 250 x 330 mm & 300x 300mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 2.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading.

Factory manufactured solid flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : II Revision IS-2191 Part-I) 1973 (a) Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:- (i) 30 mm thick

Wire gauge Hollock wood door shutter without springs housed in chowkhat. (i) 30 mm thick

Hollock wood doors shutter windows shutter including hinges, screws, chocks, cheats, stops cords etc. complete fixed in position. (a) panelled, glazed or glazed and panelled. (i) 30 mm thick

Providing & Fixing glass panes with nails and putty or wooden strip complete in all respect. (a) Glazing area above 0.09 sqm (ii) 4 mm thick or 10.78 Kg/ sqm

Hollock wood cup board shutter with plywood panels or faced on both side fixed in position (excluding the cost of handles, bolts hasp with staple but including the labour for fixing them) (a) 25 mm thick

Scraping of Cement plaster.

12.5 mm thick cement plaster 1:5.

Black Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps.

Scraping of White wash and colour wash

Preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of paris and chalk mitti including finishing the surface to the required finish complete

White washing (two or more coat)

Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats on old distempered work when shade is changed

Perparation of plywood surface for painting including sand parpering the surface and applying filling with approved quality fillers consisting of white lead,linseed oil,varnish, and chalk Mitti including finishing the surface to required finish complete.

Painting two or more coats including priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.

Finishing walls with exterior decorative cement based such as snowecem, robbiacem etc. on old work one coat to give an even shade.

Dismantling, disjointing, removal of G.I. pipe lines, specials, valves and fittings complete in all respects. (a) 15mm i/dia.

Dismantling, disjointing, removal of G.I. pipe lines, specials, valves and fittings complete in all respects. (b) 20mm i/dia.

Dismantling Sanitary fixtures such as European/Indian/Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. complete in all respect as required by Engineer-in-Charge.

European/Indian/Orissa W.C.,

PVC / China Ware Cistern

Wash Hand Basin / Urinal Pot

Stainless Steel Sink /Mosaic Sink

Cost of Aluminium fitting complete for doors,window such as tower belts, handles and screw etc. for these fitting. For shutter area up to 0.50sqm.

Providing and fixing hydraulic door closer ISI mark with necessary screw etc.Complete (a) ISI designation no I (Size of door up to 700mm)

Providing and laying jointing fixing and testing G.I Pipe lines B-Class including cost of specials such as tees,bends,sockets,elbows ets.testing cutting threading inside building complete.

Providing & Placing in position on terrace(at all Floor level) HDPE water storage tanks of approved make with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fittings and base support for tank (Triple layer tanks.)

Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect.

G.I. tank nipple 15mm i/d

G.I. tank nipple 20mm i/d

Providing and fixing in position automatic brass Ball Cock in tanks. (A) Plastic Ball Cock with rod and Plastic Ball (i) 15mm i/d

Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge

Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect. (i) Size 550 mm x 400 mm x 815 mm

Providing and fixing in position stainless steel sinks of approved make (to the approval of Engineer-in-charge) 1mm thick,grade-304 (18/8) with waste coupling complete in all respect.(a) Rectangular Sink with Deluxe Border Single Bowl Overall Size 555 mm x 475 mm x 200 mm

Providing and fixing in position C.P. brass overhead shower 1 flow without shower arm with 15mm i/d inlet of approved make (to the approval of Engineer-in-charge) complete in all respect.

Providing and fixing in position paper holder of approved make fixed in to wall with C.P brass with screw complete in all respect.(a) C.P brass toilet paper holder.

Providing and fixing in position towel rails/ring of approved make fixed in with rawl/plugs embdded in walls with brass screws complete in all respect. (a) CP brass towel bracket 610mm long

Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect.

Providind and fixing in position 5mm thick bevelled edge mirror of superior glass complete with 4mm thick hard board backing fixed in with role plug 50mm CP brass screw and washer and S/S studs on top complete in all respect size 600mmx450mm

Providing and fixing in position 15mm i/d BIB cock of approved make complete in all respects.(i) C.P. brass Bib cock foam flow without flange

Providing and fixing position PVC flexible tube connection of approved make complete in all respects.(a) PVC tube connection of size 15mmx300mm with CP Brass nut)

Providing and fixing H.C.I. Floor traps conforming to I.S.I. Specification of reputed firm of the self cleaning design with S.S. grating with frame with or without vent arm and including cement concrete 1:2:4 under and around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors,etc (a) With 100mm x 75mm i/d Floor Trap (weighing 4.0 Kg)

Providing and fixing in position stop Cock/Angle valve of approved make complete in all respects.

C.P Brass 15 mm Concrealed stop Cock with flange.

C.P.brass 15mm Angle valve without flange

RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES:- Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3universal socket (shuttered), 16/20Amp.combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-

Wiring fan point (Without fan box) in PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1.5 sqmm 1100 volts grade with step type electronic fan regulator 100 watt

Wiring light point in PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1.5 sqmm 1100 volts grade with step type electronic fan regulator 100 watt

Wiring 6Amp. wall socket point including bonding to existing earth with PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1sqmm 1100 volts

Wiring 16/20Amp. power plug control point

SUPPLY AND ERECTION OF WIRING ACCESSORIES:- Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.:-

Step type Modular Electronic Fan Regulator 100watts (One Module)

6/10amp. One Way Modular Switch (One Module)

6amp. 2/3 Universal Modular Shuttered Socket (two Module)

6amp. 2/3 Universal Modular Shuttered Socket (two Module)

16/20amp. Universal Modular Shuttered Socket (two Module)

Bakelite Batten Holder (Large size)

Ceiling Rose (Flush Piano type)

MINIATURE CIRCUIT BREAKERS:- Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-

MCB Single Pole 6-32amp. (10kA, Curve-C)

MCB Double Pole 50, 63amp. (10kA, Curve-C)

SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/ RCBO's/ RCCB's:

TP&N Horizontal Double Door Distribution Board 12 way each

Supply and erection of Concealed Metal Boxes of various sizes (1/2M, 3M, 4M, 6M, 8M, 12M, 16/18M) with brass lugs recessed in wall for mounting modular accessories including fixing and other petty material etc., including the cost of cutting and filling up of chases (with finishing the surface):-

Powder Coated Concealed Metal Box with Brass Lugs One/Two Module

Powder Coated Concealed Metal Box with Brass Lugs Three Module

Powder Coated Concealed Metal Box with Brass Lugs four Module

Powder Coated Concealed Metal Box with Brass Lugs Six Module

Supply and erection of Modular Cover Frame (Complete set) on the existing metal box including fixing and connection of existing switches and sockets and other petty material etc:-

Modular Cover Frame One or Two Module

Modular Cover Frame Three Module

Modular Cover Frame Four Module

Modular Cover Frame Six Module

The Flora Cooperative L/c Society Ltd

Enn Gee Constructicon