REPAIR TO JOINERIES AND CERTAIN OTHER CONNECTED MISC WORKS AT NKP, 8LU, 11 ASC, 3 AFSR, SITE C AND MES COMPLEX AREA UNDER GE (AF) BORJHAR

Amount

Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and as directed

S & F 2nd class hard wood timber wrought and fixed as in framed scantling over 40 Sqcm in section complete all as specified and as directed

Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed.

M&L for Weather boarding, clean sawn, plain, 20mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps of 2nd class hard wood planed both sides with butt joint fixed with nails to timber frame / roof member complete all as specified and as directed.

Dismantling boarding, any description, fixed in any position with screws complete all as specified and as directed

S&F 12mm thick plywood grade BWR type B-B fixed with screws to timber frame works complete all as specified and as directed

S&F 6mm thick plywood grade BWR type B-B fixed with screws to timber frame works complete all as specified and as directed

S&F 19mm thick commercial faced plywood grade BWR type B-B fixed with screws to timber frame work as in pelmet boxes, cup board etc complete all as specified and as directed

M & L in repairs 0.9mm thick decorative laminate type-1 (sunmica) of surface finish colour and pattern as approved fixed with approved adhesive as per manufacturer's instruction complete all as specified and directed by Engr-in-Charge.

S&F in repair 40 mm dia cupboard knobs fixed with nut, screws complete all as specified and as directed.

S & F in repair 100mm long Hasp and staple, safety type, of anodised aluminum with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed

S & F as in repair for Aluminium Mortice lock, vertical type of size 75 mm, 4 lever, complete all as specified and as directed

Taking down cement plaster on brick wall or stone wall including raking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed

Demolition of brick work or stone/boulder masonry built in cement mortar incl all quoins, arches, pillars etc complete all as specified and as directed

M&L for brickwork with subclass 'B' bricks using old size bricks stright or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed

M&L for rendering 15 mm thick in cement mortar 1:6 on fair face of brick work or concrete surfaces, finished fair and even without using extra cement complete all as specified and as directed

M&L for rendering 15 mm thick on fair faces of brick work or concrete surface in cement mortar 1:4 mixed with WPC as per manufacturer's instruction and finished the surface even and smooth without using extra cement for sunken slab complete all as specified and directed (Note: WPC will be mesured and paid separetely.)

Supply only Integral waterproofing compound (ISI mark) complete all as specified and as directed.

M&L for preparing new plastered surfaces of walls and applying two coats of cement based paint over a coat of alkali resistant primer complete all as specified and as directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of Oil Bound Distemper over a coat of alkali resistant primer complete all as specified and as directed

Taking down Wall panelling and similar work in any position complete all as specified and as directed

M&L for dismantling of unframed timber in fillets, rails, posts, rafters,purlins, etc. under 40 sq. cm in section complete all as specified and as directed

Supply and Fixing PVC solid wall lining consisting of 5 mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per manufacturer’s specification and instruction complete all as specified and as directed

M&L for fixing Plain fillets (2nd class softwood) square, rectangular or triangular in section of size exc 6 & n exc 13 sq cm , clean sawn, secured with nails or brads complete all as specified and as directed.

Supply and Fixing 5mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and as directed

Taking down chowkats or frames including shutter (without taking off shutters from the frame) area n exc. 1.5 Sqm each removing from the site including cutting holes required for taking out existing hold fast etc. complete all as specified and directed

All as per item above no. 26 but exc 1.50 Sqm n.exc 4 Sqm complete all as specified and as directed

Taking down shutters of any description n exc 1 sqm each including iron mongery & removing from site complete all as specified and directed

Taking down shutters of any description exc1 sqm but n exc 2 sqm each including iron mongery & removing from site complete all as specified and directed

Re-fixing in same opening serviceable shutter of any description not exceeding 1.0 Sqm each complete all as specified and directed

Re-fixing in same opening serviceable shutter of any description exceeding 1Sqm not exceeding 2 Sqm each complete all as specified and directed

M&L for 2nd class hard wood plain, solid, straight chowkats and frames, wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints including sanding and tarring fixed complete all as specified and as directed.

Cutting holes in brick walls built in cement mortar for inserting holdfasts and making good dismantled portion by filling cement mortar (1:3) or concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) exc half brick thick but n. exc. one brick complete all as specified and as directed.

S&F for MS work of flat iron of size 30mm x 6mm thickness as in hold fast, confirming to Fe-410-0 (Grade-E-250 Quality-A) complete all as specified and as directed.

S & F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, and edges will be painted to match will printed sheet fixed in opening as per specification and drawings complete all as spcified and directed.

S & F Factory Made Solid Panel PVC Door Shutter 30mm thick, consisting of frame made out of Mild Steel Tube of 19 Gauge thickness and size of 19mm x 19mm for Stiles and 15mm x 15mm for Top & Bottom Rails. Mild Steel Frame shall have a coat of Steel Primer of Approved Make and Manufacturer. Mild Steel Frame shall be covered with 5.0mm thick heat moulded PVC 'C' Channel of size 30 x 50mm forming Stiles and 5.0mm thick, 75mm wide PVC Sheets For Top Rail, Lock Rail & Bottom Rail on either side, and 10mm (5.0mm x 2) thick, 20mm wide Cross PVC Sheet as gap insert for Top Rail, Lock Rail & Bottom Rail. Panelling of 5.0mm thick PVC Sheet Beading on either side and joined together with Solvent Cement Adhesive, etc. An additional 5.0mm thick PVC Strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC Solvent Adhesive, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, as in repair complete all as specified and as directed.

S& F 30mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed

M&L for Glazed and skeleton shutters, 30mm thick of second class hard wood open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed

S & F 30mm thick second class hard wood Glazed and skelton shutters for window and ventilators etc open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8 clause 8.24 (a); complete all as specified and directed.

Supply and fixing anodised aluminium frame work as in partition wall, doors &, windows chowkhat with one or more rebates including joining beads cleat setc for fixing weight not less than 0.55Kg/Rm complete all as specified and directed.

M&L as in repair for 12 mm Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber/ aluminum frame work complete all as specified and as directed.

S&F for Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed

S & F for Anodised aluminium window and ventilator shutters, sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings complete all as specified and as directed

Supply and fixing 4.8 mm thick sheet glass, ordinary quality and glazing with oil putty in area exc 0.5 sqm in each pane with rubber gasket fixed to aluminium frame work / snap beading complete all as specified and as directed

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and as directed

Supply & fixing 100mm mild steel butt hinges (medium weight) cold rolled complete all as specified and as directed

Supply & fixing 75mm mild steel butt hinges (medium weight) cold rolled complete all as specified and as directed

Supply & fixing 150 mm size aluminium anodised barrel tower bolts of extruded section (ISI marked) complete all as specified and as directed

Supply & fixing extruded aluminium alloy handle fabricated type anodised 100 mm size (ISI marked) complete all as specified and as directed

S&F 150mm long aluminium anodised handles (fabricated type) ISI marked complete all as complete all as specified and as directed

S&F 200mm long aluminium anodised tower bolts extruded section, ISI marked (Make : Alans/Classic) complete all as specified and as directed

S&F 300mm long aluminium anodised sliding bolt with hasp, staple (bolt type) and fixing clips or sheets cast of extruded section and fixing bolts and sliding bolts of extruded section ISI marked complete all as specified and as directed

S&F in repairs Chromium Plated 25mm dia brass chromium plated curtain rod with fixing brackets, stops, rollers etc as complete all as specified and as directed

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed

S & F in repair door closer Aluminium (Die cast) body Hydraulically regulated (designation No. 3) universal type, suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80 kg complete all as specified and as directed

M & L for 300mm long MS helical door tail pattern springs incl roller and roller plate and fixed as in repair complete all as specified and as directed

S & F for Floor door stopper of aluminium alloy body and tongue, over all length of cover plate 150mm anodised, with hard drawn steel spring, fixed to shutter complete all as specified and as directed

Hacking out old broken glass (any thickness, size, quality or description ) from metal or wooden frame including punching or drilling out old glazing pins/spring clips or fixed with putty or beads complete all as specified and as directed

M&L for 4.8 mm thick Sheet glass, ordinary quality and glazing with oil putty or with wooden beading are wooden frame or steel frame area n exc 0.5 sq. m in each pane complete all as specified and as directed

S & F 4.8 mm thick frosted sheet glass, ordinary quality and glazing with oil putty or with wooden beads area n exc 0.5 sq. m in each pane complete all as specified and as directed

S&F stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples as complete all as specified and as directed

S&F in repairs stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed

M& L for applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10cm in width or girth over a coat of pink primer including preparation of surface complete all as specified and as directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed

M&L for non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed or bedding layer in CM(1:4) for receiving tiles complete all as specified and as directed

M&L for non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed or bedding layer in CM(1:4) for receiving tiles complete all as specified and as directed

M&L Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles over and incl 10mm thick rendering in CM (1:4) complete all as specified and as directed

Repair to aluminum door shutter of any description incl taking down and refixing with necessary adjustment to door spring/ door closer, aluminum/rubber beading, glass etc complete all as specified and as directed.

Taking down rolling shutters of any description exc 2 sqm but n exc 6 sqm each and removing to store from site complete all as specified.

S&F Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indi cated, complete: push pull or manual type , thickness of laths 1.25mm complete as directed and all as specified.

S&F ball bearing for rolling shutters as per existing size & make complete all as specified and as directed

M/s Hrishikesh Das (BID ID -3088691)

M/s Assam Construction (BID ID -3089708)

KUNDAN ENGINEERS AND BUILDERS (BID ID -3089381)

R. D. ENTERPRISE (BID ID -3088244)

M/s Priyanka Construction (BID ID -3088226)

Shiva Mangal Shah (BID ID -3088285)

M/s B.M. Enterprise (BID ID -3088201)