Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.7 LAccepted-AOC PLOT NO 79 SIS PARK DICHAON ENCLAVE PP2914 NAJAFGARH SOUTH WEST DELHI NEW DELHI 110043 | WEST DELHI | DELHI | 110043 | L1 | Accepted-AOC Being L1 bidder | |
| 2 | L2₹37.9 L+₹5.2 L (15.9%)Rejected-Finance D 2 32 FIRST FLOOR KH NO 28 1 KUNWAR SINGH NAGAR NANGLOI NEW DELHI 110041 | NEW DELHI | WEST DELHI | DELHI | 110041 | L2 | Rejected-Finance Not being L1 bidder | |
| 3 | L3₹40.1 L+₹7.4 L (22.7%)Rejected-Finance B 101 3RD FLOOR JHILMI COLONY DELHI 110095 | DELHI | EAST DELHI | DELHI | 110095 | L3 | Rejected-Finance Not being L1 bidder | |
| 4 | L4₹45.3 L+₹12.6 L (38.5%)Rejected-Finance PLOT NO 79 SIS PARK DICHAON ENCLAVE PP2914 NAJAFGARH SOUTH WEST DELHI NEW DELHI 110043 | WEST DELHI | DELHI | 110043 | L4 | Rejected-Finance Not being L1 bidder |
| Sl No | Description | Qty | Unit | BEHAL TRADERS L3 | BALRAM SETHI L1 | M/S Parmod Johar L4 | M R INTERIOR HUB L2 |
|---|---|---|---|---|---|---|---|
| 1.00 | Dismantling of brick tiles (laid flat or on edge) on roof surface laid bedded and pointed in any mortar complete all as specified and as directed. | 780 | Sqm | 10 ₹7,800 Lowest | 99 ₹77,220 | 20 ₹15,600 | 22 ₹17,160 |
| 2.00 | M & L for demolition of mud in roof, any thickness, including plastering and leeping upto four storey bldg including necessary scaffolding arrangement complete all as specified and directed(whether full thickness removed or only a part there of) and removing from cantonment area or as directed complete all as specified and as directed. | 156 | Cum | 100 ₹15,600 Lowest | 360 ₹56,160 | 1,000 ₹1,56,000 | 399 ₹62,244 |
| 3.00 | M&L for cleaning of surface properly with wire brush to remove dust/loose particles from the surface. All the cracks should be opened in V groove and sealed properly with polyurethane sealant or polymer modified mortar. The surface should be oil and dirt free & in case of any unsound surface replastering to be done properly after application of SBR bonding coat. unsound horizontal surfaces to be filled with free-flowing micro concrete complete all as specified and as directed. | 1,800 | RM | 100 ₹1,80,000 | 25 ₹45,000 | 20 ₹36,000 Lowest | 25 ₹45,000 |
| 4.00 | M&L for Plain cement concrete type B-0, 1:2:4 (12.5 mm graded crushed stone aggregate) as in roof padding, finished even and smooth without using extra cement ,including cleaning the concrete surface by steel wire brushes, up to four stories bldgs, complete all as specified and as directed. | 39 | Cum | 3,200 ₹1,24,800 Lowest | 3,700 ₹1,44,300 | 5,000 ₹1,95,000 | 4,900 ₹1,91,100 |
| 5.00 | M&L for two coats of single component non-UV resistant based polyurethane to be applied over the primed surface in an interval of 4-6 Hrs. The topcoats should be applied with brush/ roller. No dilution is required for these two coats. A non-woven geotextile sheet of 60 GSM to be sandwiched between the layers. The deposition of PU should be 1.8 kg per Sqm providing average thickness of 1.2 mm. The tensile strength of the product should be minimum 1.8 N/mm2. The elongation of the free film should be min 650% as per ASTM D412, Shore A Hardness should be min 45 as per ASTM D-2240, Crack Bridging @-9degree C min 1.5 as per ASTM C 836 & Solid Content should not be less than 90%. Moreover, the material should confirm to ASTM C-836, ASTM C-898 and over inculding SRI Coating, The topcoats should be applied with brush/roller/Spray. The deposition should be min 1.2 kg per Sq.mt. The Crack Bridging of the product should be minimum 1.5 mm & SRI value should be greater than 106. The priming coat should be self- priming with a dilution of 40% with potable water. This layer includes 1 priming coat+ 2 undiluted Topcoats complete all as specified and as directed. | 780 | Sqm | 550 ₹4,29,000 Lowest | 800 ₹6,24,000 | 700 ₹5,46,000 | 605 ₹4,71,900 |
| 6.00 | M&L for chipping out spilled and loose concrete cover and derusting steel reinforcement of concrete column, beam, slab, chajjas, parapets and the like as directed up to 25 to 35mm thick roughening and cleaning concrete surface with steel wire brushes, washed with water and allowed to dry including derusting steel wire reinforcement, providing fabric MS wire mesh 75 x 75 x 2 mm as reinforcement to concrete surface applying adhesive/admixture over steel mesh and providing 25mm average thickness guniting mix using one part of OPC 53 grade and two part of sand mixed with adhesive/admixture @ pressure of 2.5 to 3.00kg/Sqcm by guiniting machine and surface finished even and fair including necessary padding, shuttering/scaffolding, formwork (guniting work to be carried out up to 10 metre height) complete as directed at site
Note :- (a) After placing the additional reinforcement all concrete surfaces shall be thoroughly scrubbed with wire brushes, washed with water and allow to dry, apply chemistic polycretes admixture @ 2.25 kg by weight of cement all as per manufacturers instruction.
(b) when polymix concreting in taking condition, guiniting is done with polycrete admixture @ 2% by weight of cement all as per manufacturers instructions (polycrete admixture shall be procured from chemical adhesive Pvt Ltd Co or their authorised dealer).
(c) Cost of the above aspect shall be deemed to be included in the quoted rate of the respective item and nothing extra shall be paid on any account. | 200 | Sqm | 1,200 ₹2,40,000 | 550 ₹1,10,000 Lowest | 900 ₹1,80,000 | 849 ₹1,69,800 |
| 7.00 | M & L for Cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate on chajjas Nexc 1.5 Sqm to rounded or chamfered to provide concave slope , including providing a 5 mm layer with CM 1:3 adding waterproofing chemical as per manufacturer instruction and top layer of 1-1.5mm thick water proof putty and water proof paint including necessary form work complete all as specified and as directed.
Note : Cost of above deemed to be included in quaoted rate. | 50 | Each | 600 ₹30,000 | 100 ₹5,000 Lowest | 1,000 ₹50,000 | 499 ₹24,950 |
| 8.00 | Taking up or down 15mm bore steel tubing and connections including cleaning for re-fixing or removal to store, complete all as specified and as dircted. | 240 | RM | 10 ₹2,400 | 9 ₹2,160 | 5 ₹1,200 Lowest | 5 ₹1,200 Lowest |
| 9.00 | Taking up or down 20mm bore steel tubing and connections including cleaning for re-fixing or removal to store, complete all as specified and as dircted. | 150 | RM | 10 ₹1,500 | 9 ₹1,350 | 10 ₹1,500 | 6 ₹900 Lowest |
| 10.00 | Taking up or down 25mm bore steel tubing and connections including cleaning for re-fixing or removal to store, complete all as specified and as dircted. | 50 | RM | 10 ₹500 | 9 ₹450 Lowest | 15 ₹750 | 9 ₹450 Lowest |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
1 Dec 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE South Delhi Cantt-10
GE South Delhi Cantt-10
MAINT AND REPAIR WKS TO ROOFS, PARAPET, CHAJJAS, JOINERY ITEMS AND CERTAIN OTHER B/R WORKS INCLUDING OTHER B/R ALLIED WKS AT OFFICER MD ACCN LOWER AND UPPER SHANKAR VIHAR UNDER AGE B/R-II OF GE (SOUTH) DELHI CANTT-10
2025_MES_739094_1
GE/TOKEN-93/2025-26
Open Tender
Civil Works
Item Rate
180 days
GE South Delhi Cantt
As per Tender Documents
11 documents required · 11 mandatory
₹500
GE South Delhi Cantt
₹96,000
Yes
17 Jan 2026
10 Nov 2025
3 Dec 2025
10 Nov 2025
1 Dec 2025
24 Nov 2025
Amount
Dismantling of brick tiles (laid flat or on edge) on roof surface laid bedded and pointed in any mortar complete all as specified and as directed.
M & L for demolition of mud in roof, any thickness, including plastering and leeping upto four storey bldg including necessary scaffolding arrangement complete all as specified and directed(whether full thickness removed or only a part there of) and removing from cantonment area or as directed complete all as specified and as directed.
M&L for cleaning of surface properly with wire brush to remove dust/loose particles from the surface. All the cracks should be opened in V groove and sealed properly with polyurethane sealant or polymer modified mortar. The surface should be oil and dirt free & in case of any unsound surface replastering to be done properly after application of SBR bonding coat. unsound horizontal surfaces to be filled with free-flowing micro concrete complete all as specified and as directed.
M&L for Plain cement concrete type B-0, 1:2:4 (12.5 mm graded crushed stone aggregate) as in roof padding, finished even and smooth without using extra cement ,including cleaning the concrete surface by steel wire brushes, up to four stories bldgs, complete all as specified and as directed.
M&L for two coats of single component non-UV resistant based polyurethane to be applied over the primed surface in an interval of 4-6 Hrs. The topcoats should be applied with brush/ roller. No dilution is required for these two coats. A non-woven geotextile sheet of 60 GSM to be sandwiched between the layers. The deposition of PU should be 1.8 kg per Sqm providing average thickness of 1.2 mm. The tensile strength of the product should be minimum 1.8 N/mm2. The elongation of the free film should be min 650% as per ASTM D412, Shore A Hardness should be min 45 as per ASTM D-2240, Crack Bridging @-9degree C min 1.5 as per ASTM C 836 & Solid Content should not be less than 90%. Moreover, the material should confirm to ASTM C-836, ASTM C-898 and over inculding SRI Coating, The topcoats should be applied with brush/roller/Spray. The deposition should be min 1.2 kg per Sq.mt. The Crack Bridging of the product should be minimum 1.5 mm & SRI value should be greater than 106. The priming coat should be self- priming with a dilution of 40% with potable water. This layer includes 1 priming coat+ 2 undiluted Topcoats complete all as specified and as directed.
M&L for chipping out spilled and loose concrete cover and derusting steel reinforcement of concrete column, beam, slab, chajjas, parapets and the like as directed up to 25 to 35mm thick roughening and cleaning concrete surface with steel wire brushes, washed with water and allowed to dry including derusting steel wire reinforcement, providing fabric MS wire mesh 75 x 75 x 2 mm as reinforcement to concrete surface applying adhesive/admixture over steel mesh and providing 25mm average thickness guniting mix using one part of OPC 53 grade and two part of sand mixed with adhesive/admixture @ pressure of 2.5 to 3.00kg/Sqcm by guiniting machine and surface finished even and fair including necessary padding, shuttering/scaffolding, formwork (guniting work to be carried out up to 10 metre height) complete as directed at site Note :- (a) After placing the additional reinforcement all concrete surfaces shall be thoroughly scrubbed with wire brushes, washed with water and allow to dry, apply chemistic polycretes admixture @ 2.25 kg by weight of cement all as per manufacturers instruction. (b) when polymix concreting in taking condition, guiniting is done with polycrete admixture @ 2% by weight of cement all as per manufacturers instructions (polycrete admixture shall be procured from chemical adhesive Pvt Ltd Co or their authorised dealer). (c) Cost of the above aspect shall be deemed to be included in the quoted rate of the respective item and nothing extra shall be paid on any account.
M & L for Cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate on chajjas Nexc 1.5 Sqm to rounded or chamfered to provide concave slope , including providing a 5 mm layer with CM 1:3 adding waterproofing chemical as per manufacturer instruction and top layer of 1-1.5mm thick water proof putty and water proof paint including necessary form work complete all as specified and as directed. Note : Cost of above deemed to be included in quaoted rate.
Taking up or down 15mm bore steel tubing and connections including cleaning for re-fixing or removal to store, complete all as specified and as dircted.
Taking up or down 20mm bore steel tubing and connections including cleaning for re-fixing or removal to store, complete all as specified and as dircted.
Taking up or down 25mm bore steel tubing and connections including cleaning for re-fixing or removal to store, complete all as specified and as dircted.
Supplying and laying of CPVC 20mm OD pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl brass coupling fittings complete all as specified complete with fitting as required complete all as specified and as dircted.
Supplying and laying of CPVC 25 mm OD pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl brass coupling fittings complete all as specified complete with fitting as required complete all as specified and as dircted.
Taking down chowkats or frame with shutters (without taking of shutters from the frames) not exceeding 1.5 Sqm each complete all as specified and as dircted.
Taking down chowkats or frames with shutters (without taking of shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and as directed
Taking down of shutter of any description exc 1 Sqm and n.exc. 2 Sqm each complete all as specified and as directed
M & L for Cement concrete 1:2:4 type B0 using 12.50 mm graded stone aggregate as in back filling, fixing of holdfasts etc, complete all as specified and as directed.
S&F Factory made single extruded WPC (Wood Polymer Composite) Solid door/window/ Ceosetory windows & other frames/ chowkat of size 65x 125 mm comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and non toxic additives ( max toxicityindex of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete all as specified and as directed. Note: For WPC solid door/windows frames,minus 5mm tolerance in dimension i.e depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made.
Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick with edge lipping tape allaround 0.8mm to 1.00mm thick, comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed.
Supply and fixing 30mm thick factory made wire mesh solid WPC door shutter with edge lipping tape allaround 0.8mm to 1.00mm thick, consisting of Density 650 Kg /Cum Manufactured by an ISO-9001-2015 certified Company, Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (Confirming as per IS:4020). The door should be water proof, termite proof,fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. SS butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through Other hardwares shouldbe fixed with 19*6mm size steel screws etc. complete all as specified and as directed.
S&F Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and nontoxic additives ( max toxicityindex of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete all as specified and as directed. Note: -For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e., depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made.
S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opending complete all as specified and as directed.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tube for top and bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strips of 20 mm with stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail , lock rail & bottom rail on either side & as gap inserted for top rail & bottom rail , panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement , supplying and fixing in the frame at the site as per specification & drawing complete all as specified and as directed.
S&F 30mm thick factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter with edge lipping tape allaround 0.8mm to 1.00mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed.
Taking down & refixing in same opening of shutter of door , windows etc n exc 1.0 Sqm including easing and also refixing builder hardware as required including renewal of unserviceble screws , welding as required etc. complete all as specified and as directed.
Taking down of Aluminum chowkats or frame with shutter(without taking of shutter from the frame) not exceeding 1.5 Sqm each complete all as specified and as directed.
Supplying , fabrication and fixing of powder coated aluminum sections window/ventilator with frames (Powder coating not less than 50 micron) including jointing cleats for fixing builder's hardware & provision for glass panes/wire mesh including necessary fittings/fixture /aluminum snap beads etc, complete all as specified and as directed. Note:- (a) Glazing/Wire mesh shall be measured under respective item seperatly (b) Items shall be paid as per weight of aluminium sections (c) The rates quoted shall be inclusive of neoprene beading glazing clips, screws, etc as required whichshall not be measured for arriving the weight (d) The rate shall be inclusive of locking arrangement including fixing of aluminium hinges & Aluminium tower bolt in each shutter complete all as specified and as directed.
Taking down aluminium windows shutters and refixing the same after re-setting of all aluminium sections including cleats, beadings, rollers and panels, if any required complete all as specified and as directed
S&F 4.0 mm thick plain/frosted sheet glass ordinary quality and glazing with Al glazing clips& EPDM beading in square/rectangular any size in each pane complete all as specified and as directed
S & F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of perature 1.40mm and fixed with SS wire staples in door/windows and similar work complete all as specified and as directed.
S&F in repair stainless steel telescope channel of size 300 mm to 500 mm complete all as specified and directed.
S&F in repair SS AISI 304 curtain rod of 25 mm dia , with fixing brackets, side knobs etc (1.6 mm thick S S / any pattern) complete all as specified and as directed.
Dismantling boarding, any description, fixed in any position with nail or otherwise complete all as specified and as directed.
S&F Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Plain Board of required size with edge lipping tape allaround 0.8mm to 1.00mm thick comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with density not less than 650 kg/cbm Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws complete all as specified and as directed.
S&F Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Laminated Board of required size with edge lipping tape allaround 0.8mm to 1.00mm thick comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2 and esistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixinng stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws complete all as specified and as directed.
S&F Magnetic catch for wooden cupbord with complete closer macanigum claps and clips fix with stainless steel screw complete all as specified and as directed
S&F in Repair U shaped double stainless steel channel of size 10 mmx 20mmx 1.50 mm fixed to wooden frame including suitable rail / rollers etc complete all as specified and as directed
S&F stainless steel AISI 304 grade butt hinges, ISI marked of size 100 mm complete all as specified and as directed
S&F in repair stainless steel AISI 304 grade barrel tower bolt 150 mm long, extruded section,etc. complete all as specified and as directed
S&F in repair stainless steel AISI 304 grade barrel tower bolt 150 mm long, extruded section,etc. complete all as specified and as directed
S&F stainless steel AISI 304 grade handle 200 mm long, extruded section,etc. complete all as specified and as directed
S&F stainless steel AISI 304 grade barrel tower bolt 200mm long, extruded section,etc. complete all as specified and as directed.
S&F in repair stainless steel AISI 304 grade barrel tower bolt 200mm long, extruded section,etc. complete all as specified and as directed
S&F in repair for aluminium anodised hasp & staple including bolt hinge plate and fixed with screws 100mm size new complete all as specified and as directed
S&F in repair for mild steel 300mm long, ordinary rat tail rod pattern springs including roller and roller plate complete, fixed with screws to wooden frame or welding to steel frames etc complete all as specified and as directed.
S&F in repair Stainless steel of AISI 304 Grade, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete.
S & F in repair Continuous (piano) hinges,mild steel, bright finish or electrogalvanised , width of flap (when open) is 30mm, complete all as specified .
S & F 40/50mm dia, cup board knobs fixed with nut, screws and washers of aluminium, anodised complete.
M&L for running welding in repairs including cleaning and preparing surfaces for welding any thickness of metal to be welded such as MS butt hinges to MS frame, broken steel windows or ventilators, iron doors and similar work , finshinh to match with original surface, length to be measured from any one direction complete all as specified and directed.
M & L for preparation of old Steel surfaces of any description not otherwise described over 10 cms width or girth and apply one coats of synthetic enamel paint all as specified.
M & L for preparation of new Steel surfaces of any description not otherwise described over 10 cms width or girth and apply two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer all as specified.
S&F in repair, Sheet glass 4 mm thick , ordinary quality and glazing with oil putty in squares not exceeding 0.50 sqm in each pan complete all as specified and directed .
S&F in repair 4 mm thick Figured glass , pin headed type in squares not exceedig 0.50 sqm each pane complete all as specified and directed..
Dismantling wrought iron or mild steel/cast iron work of any description complete all as specified and as directed.
S&F for mild steel framed work such as framing of grills,gratings etc with ends of bars shouldered and/or riveted, welded or forged into spikes, framed guard bars, plate girder or single stanchions,built up of one beam or tubular section with flange plates, caps,bases. splices, angle brackets,cleats and other connections confirming to Fe-410-W(Gde E-250 ) quality A , complete all as specified and as directed.
S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling complete all as specified and as directed.
S&F Solid PVC Wall Lining consisting of 5 mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications including dismantling of wall and ceiling boards and directed complete all as specified and as directed.
S&F 5 mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and direct complete
Taking down cement or cement lime plaster, any description, on brick or stone walls/ concrete surface, etc including raking out joints, hacking for key, scrubbing down with water etc,complete all as specified and as directed
M & L for ready mix plaster 15 mm thick on brick or conc surfaces finished even and smooth without using extra cement mixed with by adding permeability reducing polymer @ 250gm/sqm (6%) by weight of cementitious content at time of mixing with water as per manufacturer's recommendations including all levelling the surface, curing etc complete all as specified and as directed.. NOTE : Rates for water proofing compound/ polymer deemed to be included in the above rates.
M &L for providing and applying a bond coat of Latex:Water:cement - 1:4:6 consumption @100gm/sqm on the brick wall surface by brush as per manufacturer's recommendations including curing complete all as specified and as directed..
M&L for Expose the first joint of masonry structure at ground level horizontally. The plaster must be knocked off at least 50 cm beyond the visibly penetrated area. Damaged mortar joints are to be scraped out to a depth of approximately 2-3 cm. Drilling Holes : Drilling holes 10mm diameter in masonary structure along the side of the joint as per manufacturer's instructions so as to cross the brick/ block at the intervals spacing of 15-30cm depending on extent of rising dampness as per recommendation of engineer in charge. Cleaning of holes : Clean the holes by air blower prior to fixing nozzles. Install latex polymer packer injection packers 9.8mm diameter, 10cm long in the holes and tighten. Fix the packer securely using sealent. Cutting of Packers : Cut the packers after completion of grouting without damaging structural elements.
Supply and apply of a 3 part, very low viscous, elastic polyacrylic injection resin with a versatile and adjustable reaction time having Mixed viscosity : 3-11 M.pa.s at +20 Deg C, Reaction time : adjustable according to ambient temperatrure and execution requirement between 8-50 mins, pH – 9-10, tested as per Wissbau No. 2002-094-(1A) – Function test with re-injectible hose system. The holes should be drilled until a depth of approx 5 cm (for a 6cm thick wall) before the end of the wall is reached. Pump injcection of polymer resin compound at >20 bar into or behind fissures or into masonry joint which are allowing water to infiltrate into unwanted areas. If voids in masonry being injected contain insufficient moisture to activate the grout inject a small amount of water prior to injecting the grout. When movement stops or polymer compound appears at the packer move to the next packer and inject. If the dampness is heavy, inject similarly at next joint line complete all as specified and as directed.
M&L for 15 mm thick ready mix plaster on any faces of brick work or concrete surfaces upto 4 story building , to be finished even and fair with water proofing compound by weight as per manufacturer's instructions complete all as specified and as directed.
M&L for 10 mm thick ready mix plaster on brick/ concrete surface finished fair even and smooth wihout using extra cement and then applying a coat of liquid water proofing compound as per manufacturers instruction over newly plastered surface, complete all as specified and as directed
M&L for 5mm thick ready mix plaster on ceiling and finished fair even and smooth without using extra cement, complete all as specified and as directed
M & L for preparation of the newly plastered surfaces of walls/ ceiling and applying two coats of GreenPro certified water-based, modified acrylic, exterior Apex Suprema Emulsion or equivalent as per required shade (Company depot tinted) with silicon additives, heat reflectant property, VOC less than 2% by mass, Class A IS-15489 and IS-101 @5-6 sqm/ltr with Graco-490 spray machine over one coat of primer with and including 1-1.5 mm thick water proof cement base wall care putty to prepare the surface even and smooth complete all as specified and as directed.
M&L for preparition of new plastered or unplastered surfaces of wall/ceiling and apllying 1 mm thick wall care putty on whole surface thereafter applying two coats of oil bound distemper over and including one coat of primer complete all as specified and as directed.
M & L for complete removal of existing loose treatment by scraping with mechanical wall/ ceiling by vacum based sanding machine (sanding machine with internal dust extraction system & having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7 inches /9 inches to make the surfaces free from dust, loose paint etc by using smart periodical methodology and M&L applying two coats of distemper oil emulsion, with Graco spray machine on wall/ ceilling surface white or tinted over one coat of primer with and including 1mm thick cement base wall care putty to prepare the surface even and smooth for multi storey bldgs (upto G+4) complete all as specified and as directed.
M & L for complete removal of existing loose treatment by scraping with mechanical wall/ ceiling by vacuum based sanding machine (sanding machine with internal dust extraction system & having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7 inches / 9 inches to make the surfaces free from dust, loose paint etc by using smart periodical methodology and M&L applying two coats of GreenPro certified water-based, modified acrylic, exterior Apex Suprema Emulsion or equivalent as per required shade (Company depot tinted) with silicon additives, heat reflectant property, VOC less than 2% by mass, Class A IS-15489 and IS-101 @5-6 sqm/ltr with Graco-490 spray machine over one coat of primer with and including 1mm thick waterproof cement base wall care putty to prepare the surface even and smooth with safety precautions for multi storey bldgs (upto G+4), complete all as specified and as directed.
M&L for preparation of old surface of ceiling and applying one coats of white wash, complete all as specified and as directed.
M&L for preparation of old surfaces of wall and applying one coats of white wash, complete all as specified and as directed.
M&L for 40 mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on mud phuska complete all as specified and as directed.
All as per ser item No 72.00 here in before but except brick tiles.
Dismantling bricks tiles or terracig tiles single layers on roof and removing mortar from and cleaning bricks, stacking for measurement including all extra handling and removal and disposing off rubbish complete all as specified and as directed.
M & L for Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in roof kerbs or mud stops, rounded or chamfered and hold fast on edge including necessary form work complete all as specified and as directed
M&L for complete removal of existing treatment from internal surfaces of walls or a part thereof (In Patches ), area exe 1.00 Sqm but not exceeding 3.00 Sqm, which is damage due to seepage or any other reason & preparing and levelling the disturbed surfaces by using cement base wall care putty to obtain even and smooth wall surfaces of that portion and using sand paper and than applying two coats of oil bound distemper over a coat of primer, including scaffolding arrangement, trestles, ladders, complete all as specified and as directed.
M&L for complete removal of existing treatment from internal surfaces of walls or a part thereof (In Patches ), area exceeding 3.00 Sqm but not exceeding 5.00 Sqm , which is damage due to seepage or any other reason & preparing and levelling the disturbed surfaces by using cement base wall care putty to obtain even and smooth wall surfaces of that portion and using sand paper and than applying two coats of oil bound distemper over a coat of primer,including scaffolding arrangement, trestles, ladders, complete all as specified and as directed
M&L for rotational moulded polythylene water storage tanks 1000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR-I including brass valve high pressure with polythne float and fly nut , tank nipple as required complete, screwd for iron pipe or brass ferrule size 25 mm bore including Dismantling of water tanks of any type/pattern not exc 1000 ltr and removing from site of work, complete all as specified and as directed.
M&L for rotational moulded polythylene water storage tanks 500 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR-I including brass valve high pressure with polythne float and fly nut , tank nipple as required complete, screwd for iron pipe or brass ferrule size 25 mm bore including Dismantling of water tanks of any type/pattern not exc 500 ltr and removing from site of work, complete all as specified and as directed
Disconnecting existing tanks of capacity 500 litre, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting at other place as directed and reconnecting , repair if required and re-fixing in position complete all as specified and as directed
Disconnecting existing tanks of 1000 liter, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting at other place as directed and reconnecting , repair if required and re-fixing in position complete all as specified and as directed
S&F in repair 15 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe (minimum weight 210 gms) complete all as specified and as directed
S&F in repair 25 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe (minimum weight 210 gms) complete all as specified and as directed
S&F in repair 25 mm size Gun metal, globe or gate valvees, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed
S & F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed
Supply and Fixing 110mm dia PVC (SWR) pipes single socketed in any length fixed to walls including suitable clamps at one meter of interval including Taking down eaves gutter rain water pipe (any size of pattern) including all fittings, heads, shoes, bends, swan-necks and cleaning or fixing or removal, complete all as specified and as directed
S&F in repairs for PVC (SWR) bends/Tees of radius, suitable for 110mm dia PVC pipes fixed complete all as specified and as directed
Supply and Fixing 150 mm dia PVC (SWR) pipes single socketed in any length fixed to walls including suitable clamps at one meter of interval including Taking down eaves gutter rain water pipe (any size of pattern) including all fittings, heads, shoes, bends, swan-necks and cleaning or fixing or removal, complete all as specified and as directed
S&F in repairs for PVC (SWR) bends/Tee etc of radius, suitable for 150 mm dia PVC pipes fixed complete all as specified and as directed
Demolition of brick work built in cement mortar, including all quoins, arches, pillars etc of any description including removing debrish from site complete all as specified and as directed
M&L for brick work with sub class `B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.
S&F Modular Cabinet Kitchen accessories of Stainless Steel grade-304, 6mm size rod thickness including :- (i) Perforated Cutlery basket, (ii) Grain trolley, (iii) Thali basket, (iv) Cup & saucer basket, (v) Glass basket, (vi) Plate basket, (vii) Premium magic corner (viii) Oil Pull out Tray ( Triple basket layer) , (ix) Dust bin, (x) Cleaning kit rack of size as per site requirement all spd and directed by Engr in charge
S&F 75 mm long AL Bihari concealed type hydraulic hinges including stainless screw complete all as specified and directed.
S&F MS roller with "C" shape staple, chromium plated for 5.5mm thick sheet glass, complete all as specified and directed.
S& F in repairs staianless plate rack made of 1 mm thick stainless steel sheet of size 750 mm x 900 mm x 210mm consisting of 3 shelf for bowls and one shelf for keeping six nos of big utensil and seven nos of small utensils divided by 10 mm dia stainless steel hollow pipe @ 60 mm centre to centre or as per drg and sample kept in GE"s office complete all as specified and as directed.
M & L for Anti termite Treatment of soil under existing floors using chemical chlorpyrifos emulsifiable concentrate @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 to match the existing floors complete all as specified and as directed.
M & L for injecting chemical chlorpyrifos emulsifiable concentrate for Post Constructional Anti termite Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and as directed.
S&F in repairs Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.
S&F Extruded aluminium alloy handles 125 mm , fabricated D type, anodised complete all as specified and as directed.
S&F stainless steel AISI 304 grade barrel tower bolt 100 mm long, extruded section,etc. complete all as specified and as directed
M R INTERIOR HUB (BID ID -3487032)
BEHAL TRADERS (BID ID -3491811)
M/S Parmod Johar (BID ID -3486820)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.75 MB
TenderpagestT93.pdf
Tender Documents • 1.40 MB
BOQ_827582.xls
BOQ • 3.13 MB
SchofcreditT93.pdf
Additional Documents • 0.39 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .