Repair of Electrification and Electrical Installations in District Hospital Kathua.

Amount

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

4 X 6 sq. mm + 2 X 6 sq. mm earth wire

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

2 X 10 sq. mm + 1 X 6 sq. mm earth wire

4 X 16 sq. mm + 2 X 6 sq. mm earth wire

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Fabrication, supplying, installation testing and commissioning of following pannel CPRI approved made out of 2mm thick M.S. sheet, floor/wall mounted, vermin and dust proof, indoor/outdoor type with suitable size of angle iron legs for grouting in the ground, with lockable type hinged doors, duly powder coated with provision of space for fixing of required no of MCCB's, C.O.S, MCB strips, aluminum Bus Bars etc as required.

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

MCCB FP 160 Amp. 36 KA

Change Over Switch 250 A FP front operateable

Aluminium Bus Bar 800 Amp.

Supplying installation testing and commissioning of XLPE insulated and PVC sheathed / power cable of 1.1 KV grade of following size in ground/cable tray as per site conditions as required.

50 sq. mm x 3.5 core Armoured.

70 sq. mm x 3.5 core Armoured.

95 sq. mm x 3.5 core Armoured.

Supply, installation, testing & commissioning of maintenance free copper earthing system with 3 mtrs. Electrode 40 mm dia with minium 2mm thick and does not require manual additional of water. The electrode shall be pre-filled with hygroscopic powder and provided with suitable breathing and leaching ports at the ends. the electrode shall be surrounded by suitable powdered form of BEE MOIST so as to provide maximum contact between the electrode and the compund. The compound should be eco-friendly The earthing pit should be covered with PVC cover.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single Pole

Supplying and fixing of following rating 240/415 Volt's "C" Series miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commissioning. (Above 32 Amp.).

SPN 40 Amp.

SPN 63 Amp.

TPN FP 40 Amp.

TPN FP 63 Amp

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

1 x 1.5 sq. mm

2 x 1.5 sq. mm

1 x 2.5 sq. mm

2 x 2.5 sq. mm

1 x 4 sq.mm

2 x 4 sq.mm

1 x 6 sq.mm

2 x 6 sq.mm

Supplying and fixing of Electrical items.

20/22 watt LED 4 feet tube light fitting/fixture CRCA housing with 2000 Lumens and min lumens efficiency 100 Lumens/watt P.F 70.95 THD < 16% & voltage input range 140-270 V with Shot circuit & overloading protection circuit off

Supplying and fixing of following electrical items suitable for operating on 240/230Volts AC, 50 Hz supply.

Ceiling fan 1200 mm sweep

Exhaust fan 300 mm

Wall fan 400 mm

M/S LUMEN ENGINEERS

ROHIT ASSOCIATES