GF 2024_25 President room repair in Thiruporur Town Panchayat

Amount

Dadooing the walls with glazed tiles of 30 c.m x 20 c.m 6mm size laid in cement mortor 1:2 mix 10mm thick and pointing with 0.40 kg white cement per m2 etc.

Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick laid in-situ and pointed with same coloured cement

Brick partition walls of 10.80cm thickness using best quality country bricks of size 8-3/4" x 4-1/4" x 2-3/4" in Cement Mortar 1:3 (One Cement and Three Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately) Ground Floor

Supply and fixing of country wood window ventilator for the following size of shutters including fixing of holdfast cost and conveyance of all materials to site and all labour charges etc., Complete as per standard specification.

Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 liters capacity PVC / 12.5 liters capacity porcelain low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting

Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron brackets, including cost of 15mm diametre brass chromium plated piller tape,32 mm diametre C.P. Waste union, 32 mm diametre P.V.C. waste pipe with rubber plug and chain, 15mm diametre G.M.wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc., including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and paintiung the brackets with two coats of paint over a primimg coat of anticorrosive paint including testing for leackage etc., complete complying with standard specifications

Supplying and fixing in position indian make bewelled edge mirror of approved quality and brand of size 600 X 450mm wth necessary plastic back, PVC frame with bottom stand of approved colour with brass screws,rawal plugs etc., complete complying with standard specifications.

Painting two coats for Interior surface with approved Interior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

White washing two coats with freshly burnt shell lime white in colour in all floors including cost of lime and other materials brushes scaffolding charges etc.complete complying with standard specification and as directed. -100sq.m S.I.333

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification

Fabricating supplying and fixing of pre painted galvanium colour sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.

Supplying and laying 2 core 4 sq.mm Aluminium conductor PVC insulated LTUG cable MW-M0165 (Page 230 SOR 2024-25 Volume II)

18W LED 3000K Round Type Recessed Fitting with LED M-1286 (Page 168 SOR 2024-25 Volume I)

Water Tight Bulk Head Fitting suitable for 100 / 60 Watts Lamp with Guard Heavy Type M-1320 (Page 170 SOR 2024-25 Volume I)

15W LED Bulb (M-1283 Page 168 SOR 2024-25 Volume I)

Wiringwith2x1.5sq.mmPVCinsulatedSCunsheathedFRLScopperconductorof1100VgradeinsuitablePVCrigidpipeonwallandceilingwithPVCaccessorieswith150x100x113mmTWswitchboxfor5A3pinnoninterlockingWallsocketwith5Aflushtypeswitchwithpaintingofsuitablecolourwithcontinuousearthwireconnectionof1.5sq.mm copper wire for open PVC plug point (SD 36 ) (Page 21 Electrical SOR 2024-25)

25 mm dia PVC pipe M-0876 (Page 146 SOR 2024-25 Volume I)

Brass Chromium Plated Screw Down Tap 15 / 12mm dia (Heavy Type) M-0508 (Page 87 SOR 2024-25 Volume 1)

Brass Chromium Plated Pillar Tap (Heavy Type) - 15 / 12mm dia M-0509 (Page 87 SOR 2024-25 Volume 1)

Supplying and Fixing of WPC Doors (half of the Upvc Door rate)

Providing Wall Panelling using one side teak wood sheet with melamine polishing with following specification. The frame using aluminium tubular section of size 50mm x 25mm x 2mm thick fixing horizontally and vertically in position with wall at interval of 0.60m in both diretions, fixing water proof plywood of 12mm thick over the aluminium frame work with necessary screws. One side teak wood sheet of 3.5mm thick will be fixed over the plywood using fevical and finishing with melamine polishing and the rate inclusive of conveyance to site and labour charges and as directed by the Departmental Officers. The design pattern, water proof plywood, OST sheet and other materials to be used shall be got approved by the Executive Engineer concerned before use on work etc., complete. M-0704 (Page 112 SOR 2024-25 Volume - I)

VIP Special Type Executive High Back Revolving Chair with Cushion seat and Back with Black Colour Rexine Finish (TSCHR 004) : Made out of Heavy duty 5 Prong Metal base with Aluminium die cast and Hydraulic height adjustment. Heavy duty polyurethane wheel assembling, 2" thick and 50mm denisity moulded foam with Seat & Back. First quality leather touch rexine finish. (As per TANSI rate RC.No.: 0596/M/2024 Dt.03-10-2024)

White Marble Slab (Adanga) 18mm to 20mm Thick 4’0’’ x 2’0’’ and above M-0233 (Page 72 SOR 2024-25 Volume I)

Supplying and Fixing of Aluminium Dye Cast Letters of approved size and colour. The colour treatment process is achieved with MRF colour coat and then the processed coloured layer is set into the kiln for the heat treatment process for the following sizes A) Tamil Brass Letters 20 CM (M-0697 Page 112 SOR 2024-25 Volume I)

B) Emblem (15”) (M-0703 Page 112 SOR 2024-25 Volume I)

Supply and Fixing of D-Link 4u Rack

Steel library rack of size : 76" x 36 " x 18 " (TSRCK 003) : made out of using 40x40x5 5/6 mm MS and 18 G CR sheet angle 6 trays + 1 top cover, both sides open with one coat of red oxide and two coat of enamel paint finish. Weight not less than 79 Kgs Approximately (As per TANSI rate RC.No.: 0596/M/2024 Dt.03-10-2024)

Vinyl Flooring 2mm thick M-0649 (Page 97 SOR 2024-25 Volume 1)

20W 4 Feet LED Fitting with LED (M-1273 Page 168 SOR 2024-25 Volume 1)

Supply and Fixing of 110mm dia PVC Pipeline M-0865 ( Page 146 SOR 2024-25 Volume 1)

Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Paving the floor with pre-polished Concrete Anti-Skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg/sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers.