ARMO various E and M Services installed at Sanjay Gandhi Memorial Hospital Mangolpuri Bhagwan Mahavir Hospital Pitampura and Deep Chand Bandhu Hospital Ashok Vihar Delhi

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.

80x1.25 mm M.S. laths with 1.25 mm thick top cover

Providing and fixing ball bearing for rolling shutters

Extra for providing mechanical device chain and crank operation for operating rolling shutters.

Exceeding 10.00 Sqm and upto 16.80 sqm in the area

Painting with synthetic enemel paint of approved brand and manufacture of required colour to give an even shade :

Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

Providing and fixing 10 mm thick multiwall poly vinyl carbonate sheets of approved brand. (both side UV coated ) in roofing over M.S frame work including necessary top and bottom aluminium profile size 5mm x 50mm thickness section H/U profile, neoprene gasket, self tapping, SS screw not less then 50mm x 6mm, silicon sealant etc. for fixing of sheet at any floor level upto floor five level including scaffolding all complete as per direction of engineer in charge. (M.S Frame to be paid for separately).

Servicing, overhauling & repairing/replacement defective parts of existing heavy duty fully automatic motorized rolling shutter and heavy duty fully automatic motorized rolling system with site rolling shutter motor with Single Phase 220 Volt, 50Hz Lifting force capacity 600kg single phase gressing oiling, shaft overhauling Gearbox Locking system overhauling i/c credit buy back of same and repairing, GI Rolling Shutter etc. Complete as required.

Providing and Replacement of following spare parts of 4000 LPH R.O. plant system for smooth functioning of system complete etc as required. (Make Simon).

Electronic Panel impel upto 10000 LPH RO Plant

Multimedia different size

Pressure Gauge SS-304 (Big Dial) 25 kg

Pressure Gauge SS-304 (Big Dial) 21 kg

SITC of wall mounted three phase DOL Starter Submersible pump controler with enclosure 440V 50Hz suitable for 5 to 7.5 HP motor complete with all accessories overload relays, contactor, single phase preventer, Ammeters, Voltmeter, auto & manual switch i/c connection etc as required i/c buyback of old / damage dismantle material etc complete as reqd.

SITC of Submersible pumpset of capacity 5 HP, having delivery size 65mm, capable of discharge 560-250 LPM at a head range 14-68 Mtr., 5 stage suitable for operation on 415 V ,50 Hz three phase AC supply including making the connection with suction and delivery lines, making the electrical connection with existing Starter etc. as reqd.

Repairing and servicing of old tilt tower ladder of height (20 ft. - 32 ft.) including replacement of damaged spare parts such as chequerd sheet, wheels and rims, welding of side / main arms, guide rails, greesing, safety wire, painting, testing and commissioning etc complete as reqd in all respect etc complete as required. (Dismental material shall be return to the contractor)