Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.2 LAccepted-AOC | L1 | Accepted-AOC L1 BIDDER | |
| 2 | L2₹45.2 L+₹3.0 L (7.10%)Rejected-Finance | L2 | Rejected-Finance HIGHER BIDDER | |
| 3 | L3₹46.8 L+₹4.6 L (11.0%)Rejected-Finance | L3 | Rejected-Finance HIGHER BIDDER | |
| 4 | L4₹46.9 L+₹4.8 L (11.3%)Rejected-Finance | L4 | Rejected-Finance HIGHER BIDDER | |
| 5 | L5₹47.3 L+₹5.2 L (12.2%)Rejected-Finance | L5 | Rejected-Finance HIGHER BIDDER |
| Sl No | Description | Qty | Unit | shivam builders L4 | B.L. Chaudhri and Co. L5 | Dee Kay EnterPrises L6 | M/S Pee Kay Builders L7 | M/S CHAWLA CONSTRUCTION COMPANY L2 | VRTRADERS L3 | M/s Sham and Company L1 | M/s Sarup Singh L8 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | M&L to repair Almirah steel large with shelf/Almirah steel large 1/2H 1/2 shelf by replacing the following unserviceable parts with approved ones including cutting, welding, turning, bending etc all as shown on drg. Rest all as per the drawings and directed by Engr-in-charge. (DRG NO. FD-1031/ FD/E6/MAP/18)
(i) Leg made out of 1mm thick MS sheet duly painted with one coat of red oxide primer. | 80 | Each | 370 ₹29,600 | 360 ₹28,800 Lowest | 400 ₹32,000 | 390 ₹31,200 | 400 ₹32,000 | 450 ₹36,000 | 362 ₹28,960 | 380 ₹30,400 |
| 2.00 | ditto all as per item No 1 but for shelves made out of 1mm thick MS sheet duly painted with one coat of red oxide primer. | 120 | Each | 450 ₹54,000 | 450 ₹54,000 | 500 ₹60,000 | 490 ₹58,800 | 550 ₹66,000 | 500 ₹60,000 | 418 ₹50,160 Lowest | 440 ₹52,800 |
| 3.00 | ditto all as per item No 1 but for Chromium plated handle 130mm long complete. | 110 | Each | 140 ₹15,400 | 150 ₹16,500 | 130 ₹14,300 | 190 ₹20,900 | 70 ₹7,700 Lowest | 80 ₹8,800 | 130 ₹14,300 | 150 ₹16,500 |
| 4.00 | ditto all as per item No 1 but for MS lock 6 lever with duplicate key complete. | 100 | Each | 200 ₹20,000 | 200 ₹20,000 | 200 ₹20,000 | 190 ₹19,000 | 80 ₹8,000 Lowest | 90 ₹9,000 | 196 ₹19,600 | 180 ₹18,000 |
| 5.00 | ditto all as per item No 1 but for Locking device assembly complete set as per drawing and as directed by Engineer-in-Charge. | 120 | Each | 260 ₹31,200 | 250 ₹30,000 | 280 ₹33,600 | 245 ₹29,400 | 250 ₹30,000 | 245 ₹29,400 | 220 ₹26,400 Lowest | 250 ₹30,000 |
| 6.00 | ditto all as per item No 1 but for locking device cover complete as per drawing and as directed by Engineer-in-Charge. | 120 | Each | 160 ₹19,200 | 150 ₹18,000 | 180 ₹21,600 | 160 ₹19,200 | 260 ₹31,200 | 260 ₹31,200 | 140 ₹16,800 Lowest | 150 ₹18,000 |
| 7.00 | M&L to repair Almirah medium/small steel replacing the following unserviceable parts with approved ones including cutting, welding, turning, bending etc all as shown on drg. Rest all as per the drawings and directed by Engr-in-charge.(DRG NO. FD-1032/1034)
(i) Leg made out of 1mm thick MS sheet duly painted with one coat of red oxide primer. | 240 | Each | 300 ₹72,000 | 310 ₹74,400 | 290 ₹69,600 | 330 ₹79,200 | 350 ₹84,000 | 320 ₹76,800 | 280 ₹67,200 Lowest | 345 ₹82,800 |
| 8.00 | ditto all as per item No 7 but for shelves made out of 1mm thick MS sheet duly painted with one coat of red oxide primer. | 240 | Each | 460 ₹1,10,400 | 450 ₹1,08,000 | 490 ₹1,17,600 | 490 ₹1,17,600 | 400 ₹96,000 | 380 ₹91,200 | 350 ₹84,000 Lowest | 470 ₹1,12,800 |
| 9.00 | ditto all as per item No 7 but for Chromium plated handle 130mm long complete. | 250 | Each | 150 ₹37,500 | 150 ₹37,500 | 200 ₹50,000 | 190 ₹47,500 | 60 ₹15,000 Lowest | 70 ₹17,500 | 90 ₹22,500 | 150 ₹37,500 |
| 10.00 | ditto all as per item No 7 but for MS lock 6 lever with duplicate key complete. | 400 | Each | 195 ₹78,000 | 200 ₹80,000 | 230 ₹92,000 | 190 ₹76,000 | 80 ₹32,000 Lowest | 80 ₹32,000 Lowest | 150 ₹60,000 | 190 ₹76,000 |
Tender Value
Refer Docs
EMD Value
₹90,000
Closing Date
25 Aug 2025, 6:00 pmClosed
CWE FEROZEPUR CANTT
HQ CWE FEROZEPUR CANTT PIN 152001
REPAIRS TO CERTAIN STEEL FURNITURE INCLUDING PAINTING UNDER BSO OF GE(WEST) FEROZEPUR CANTT
2025_MES_724414_1
CWE/FZR-25/2025-26
Open Tender
Civil Works
Item Rate
180 days
FEROZEPUR CANTT
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (West) Ferozepur Cantt
₹90,000
Yes
26 Sept 2025
4 Aug 2025
1 Sept 2025
4 Aug 2025
25 Aug 2025
19 Aug 2025
Amount
M&L to repair Almirah steel large with shelf/Almirah steel large 1/2H 1/2 shelf by replacing the following unserviceable parts with approved ones including cutting, welding, turning, bending etc all as shown on drg. Rest all as per the drawings and directed by Engr-in-charge. (DRG NO. FD-1031/ FD/E6/MAP/18) (i) Leg made out of 1mm thick MS sheet duly painted with one coat of red oxide primer.
ditto all as per item No 1 but for shelves made out of 1mm thick MS sheet duly painted with one coat of red oxide primer.
ditto all as per item No 1 but for Chromium plated handle 130mm long complete.
ditto all as per item No 1 but for MS lock 6 lever with duplicate key complete.
ditto all as per item No 1 but for Locking device assembly complete set as per drawing and as directed by Engineer-in-Charge.
ditto all as per item No 1 but for locking device cover complete as per drawing and as directed by Engineer-in-Charge.
M&L to repair Almirah medium/small steel replacing the following unserviceable parts with approved ones including cutting, welding, turning, bending etc all as shown on drg. Rest all as per the drawings and directed by Engr-in-charge.(DRG NO. FD-1032/1034) (i) Leg made out of 1mm thick MS sheet duly painted with one coat of red oxide primer.
ditto all as per item No 7 but for shelves made out of 1mm thick MS sheet duly painted with one coat of red oxide primer.
ditto all as per item No 7 but for Chromium plated handle 130mm long complete.
ditto all as per item No 7 but for MS lock 6 lever with duplicate key complete.
ditto all as per item No 7 but for Locking device assembly complete set as per drawing and as directed by Engineer-in-Charge.
ditto all as per item No 7 but for Locking device cover complete as per drawing and as directed by Engineer-in-Charge.
M&L to repair Locker steel by replacing the following unserviceable parts with approved ones including cutting, welding, turning, bending etc all as shown on drg. Rest all as per the drawings and directed by Engr-in-charge. (DRG NO. FD-1029) (i) Leg made out of 1mm thick MS sheet duly painted with one coat of red oxide primer.
ditto all as per item No 13 but for Chromium plated handle 100mm long.
ditto all as per item No 13 but for Chromium plated hasp and staple 75mm long.
ditto all as per item No 13 but for MS hinge 75mm long.
Supply & fixing as in replacement of UNSV MS sheet parts of Locker steel including cutting, welding, turning, bending etc. Parts should be made out of MS sheet 1 mm thick all as shown on drg, rest all as specified and directed. FD-1029)
M&L to repair Table 900mm x 600 mm steel with drawer by replacing the following unserviceable parts with approved ones including cutting, welding, turning, bending etc all as shown on drg. Rest all as per the drawings and directed by Engr-in-charge. (DRG NO. FD-1008 ) (i) Top made out of 18mm thick pre-laminated particle board (exterior gde) one side teak face and balancing white on other side duly teakwood beading 4x18mm all around of suitable size fixed by panel pins and adhesive. Rest all as per the drawings and directed by Engr-in-charge.
ditto all as per item No 18 but for MS square pipe 25mm having 1.6mm wall thickness as in legs, top rail/side rail and bottom rail.
ditto all as per item No 18 but for MS lock of suitable size with duplicate key.
ditto all as per item No 18 but replacement of PVC handle of approved quality suitable for drawer.
ditto all as per item No 18 but for Making the drawer functional by removing dents from MS sheet align and leveling the drawer and greasing it grooves so as to achieve smooth sliding complete.
ditto all as per item No 18 but for new drawer as in replacement of UNSV drawer including cutting, welding, turning, bending etc all as shown on drg. Rest all as specified and directed.
ditto all as per item No 18 but replacement of PVC/hard rubber toe of approved quality and suitable size.
M&L to repair Table 900mm x 600mm steel without drawer by replacing the following unserviceable parts with approved ones including cutting, welding, turning, bending etc all as shown on drg. Rest all as per the drawings and directed by Engr-in-charge.(DRG NO. FD-1007) (i) Top made out of 18mm thick pre-laminated particle board exterior gde one side teak face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pins and adhesive. Rest all as per the drawing and directed by Engr-in-charge. (DRG NO. FD-1007 )
ditto all as per item No 25 but for MS square Pipe 25mm having 1.6mm wall thickness as in legs, top rail/side rail and bottom rail.
ditto all as per item No 25 but for replacement of PVC/hard rubber toe of approved quality and suitable size.
M&L to repair Table 900mm x 900mm steel by replacing the following unserviceable parts with approved ones including cutting, welding, turning, bending etc all as shown on drg. Rest all as per the drawings and directed by Engr-in-charge. (DRG NO. FD-1009 ) (i) Top made out of 18mm thick pre-laminated particle board exterior gdeone side teak face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pins and adhesive. Rest all as per the drawings and directed by Engr-in-charge. (DRG NO. FD-1009 )
ditto all as per item No 28 but for MS square pipe 25mm having 1.6mm wall thickness as in legs, top rail/side rail.
ditto all as per item No 28 but for replacement of PVC/hard rubber toe of approved quality and suitable size.
M&L to repair Teapoy verandah by replacing the top made out of 18mm thick pre-laminated particle board exterior gde one side teak face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pins and adhesive. Rest all as per the drawings and directed by Engr-in-charge. (DRG NO. FD-383)
Replacement of MS Flat iron of long portion of suitable size to be welded with frame under bottom seat complete of all of teapoy varandah as specified and directed.
S&F PVC toe for teapoy verandah of approved quality and suitable size.
M&L to repair Teapoy varandah (MAP) by replacing the top made out of 18mm thick pre-laminated particle board exterior gde one side teak face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pins and adhesive. Rest all as per the drawing and directed by Engr-in-charge. (DRG NO.FD/E6/MAP/17)
S&F PVC/Hard rubber toe for teapoy verandah (MAP) of approved quality and suitable size.
M&L to repair Table office clerk (steel) by replacing the following unserviceable parts with approved ones including cutting, welding, turning, bending etc all as shown on drg. Rest all as per the drawings and directed by Engr-in-charge.(DRG NO. FD-1004/84(M)). (i) MS lock of suitable size with duplicate key.
ditto all as per item No 36 but for replacement of PVC handle of approved quality suitable for drawer.
ditto all as per item No 36 but for Making the drawer functional by removing dents from MS sheet align and leveling the drawer and greasing it grooves so as to achieve smooth sliding complete.
ditto all as per item No 36 but for Top made out of 18mm thick pre-laminated particle board exterior gde one side teak face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pins and adhesive. Rest all as per the drawings and directed by Engr-in-charge.
ditto all as per item No 36 but for MS square pipe 25mm having 1.6mm wall thickness as in legs, top rail/side rail and bottom rail.
ditto all as per item No 36 but for replacement of PVC/Hard rubber toe of suitable size.
M&L to repair Table office officer (steel) by replacing the following unserviceable parts with approved ones including cutting, welding, turning, bending etc all as shown on drg. Rest all as per the drawings and directed by Engr-in-charge. (DRG NO. FD-1003/84(M)). (i) MS lock of suitable size with duplicate key.
ditto all as per item No 42 but for replacement of PVC handle of approved quality suitable for drawer.
ditto all as per item No 42 but for Making the drawer functional by removing dents from MS sheet align and leveling the drawer and greasing it grooves so as to achieve smooth sliding complete.
ditto all as per item No 42 but for Top made out of 18mm thick pre-laminated particle board exterior gde one side teak face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pins and adhesive. Rest all as per the drawings and directed by Engr-in-charge.
ditto all as per item No 42 but for MS square pipe 25mm having 1.6mm wall thickness as in legs, top rail/side rail and bottom rail.
ditto all as per item No 42 but for replacement of PVC/Hard rubber toe of suitable size.
PVC Seat & Back (Chair Varandah Drg No. FD/MAP-II/15) Taking down unserviceable plastic PVC Seat & back from chair verandah MAP and S&F new Seat & back of chair verandah, made out of 4 mm thick PVC moulded alongwith 4x10mm ribs & 90x10mm grooves as shown on drgs. the weight of seat / Back shall not be less than 0.90 Kg. Rest all as per drg and directed by Engr-in-charge. Make : AMKO/Swastik
Apply one coat of synthetic enameled white paint to chair after preparing the surface of chair verandah.(FD/MAP-II/15) Rest all shown on drawings and as specified and directed.
Supply and fixing new 19mm conduit pipe of 16 guage beneath the seat of chair verandah MAP to support PVC seat including cutting, welding, turning, bending etc with one coat of red oxide primer & two coat of white enamaled paint. Rest all as per drg and directed by Engr-in-charge.
Supply & fixing new PVC shoe of approved quality to Chair Varandah MAP. Rest all shown on drawings and as specified and directed.
M&L to repair Table computer by replcing the following parts with prelaminated particle board exterior gde .Rest all as per the drawings and as directed by Engr-in-charge. (DRG NO.FD/E6/MAP/03) (i) Top made out of 18mm thick pre-laminated particle board exterior gde one side teak face and balancing white on other side duly provided with PVC beading 4x18mm thick all around of suitable size fixed by panel pin and adhesive. Rest all as per the drawings and as directed by Engr-in-charge.
ditto all as per item No 52 but for Side made out of 18mm thick pre-laminated particle board exterior gde one side teak face and balancing white on other side complete.
ditto all as per item No 52 but for Key board tray complete excluding telescopic channel
ditto all as per item No 52 but for pull out tray complete excluding telescopic channel.
ditto all as per item No 52 but for drawer complete excluding telescopic channel and knob.
ditto all as per item No 52 but for middle shelf including vertical portion complete.
ditto all as per item No 52 but for bottom shelf complete.
M&L to repair Table dining OR Steel by replacing the top made out of 18mm thick pre-laminated particle board exterior gde one side teak face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pins and adhesive. Rest all as per the drawing and as directed by Engr-in-charge. (DRG NO. FD-165)
Removal of u/s members of lower steel frame of Table dining OR Steel and supply of new members of required size made out of MS square pipe 25mm. The rate of removal of u/s members by welding, cost of MS pipe, cutting of pipe into pieces of required size included in quoted rate. The cost of welding of end of pipe will be quoted separately.
S&F PVC/Hard rubber toe of approved quality and suitable size for Table dining OR Steel.
M&L to repair Chair CB steel with arms by replacing the following parts with first class teak wood/approved ones. Rest all as per the drawings and as directed by Engineer-in-Charge. FD-75 (M) (i) Seat/back having 30mm thickness and 50mm width of rail (duly paint with black colour synthetic enameled paint and caned with approved quality of cane and as per godrej pattern)
ditto all as per item No 62 but for replacement of MS cleats of size 25mm x 3mmx60mm long duly welded to frame to support seat.
ditto all as per item No 62 but for Handle made out of first class teak wood.
ditto all as per item No 62 but for Re-caning seat / back.
ditto all as per item No 62 but for replacement of PVC shoe of approved quality and suitable size.
M&L to repair chair CB steel without arms by replacing the following parts first class teak wood/approved ones. Rest all as per the drawings and as directed by Engineer-in-Charge. FD-75 (M) (i) Seat/back having 30mm thickness and 50mm width of rail (duly paint with black colour synthetic enameled paint and caned with approved quality of cane and as per godrej pattern)
ditto all as per item No 67 but for replacement of MS cleats of size 25mm x 3mmx60mm long duly welded to frame to support seat.
ditto all as per item No 67 but for Re-caning seat / back.
ditto all as per item No 67 but for replacement of PVC shoe of approved quality and suitable size.
M&L repairs to Chair computer/chair revolving (made out of tapestry cloth) by replacing unserviceable parts as per drawings/TP. Rest all as directed by engr-in-charge. (Drg No.FD/E6/MAP/01,TP) (i)Only tapestry cloth of seat and back complete.
ditto all as per item No 71 but for Tapestry cloth and foam of seat/ back complete.
ditto all as per item No 71 but forOnly Plywood of seat /back.
ditto all as per item No 71 but for Hydraulic of suitable size.
ditto all as per item No 71 but for Push back plate complete all as specified and directed
ditto all as per item No 71 but for Base (padestal assy) PVC/Iron of suitable size and pattern.
ditto all as per item No 71 but for Wheel of suitable size and pattern.
ditto all as per item No 71 but for Arms as requred by size and design. Note:- sample and shade of materials will be determined as per actual requirement at site.cost of tapestry cloth shall not be less than 180/-per meter.
M&L for preparation of old steel surface of Chair verandah and welding loose joints, if any including de-rusting the surface and painting with one coat of synthetic enamelled paint white colour (1st Grade Quality) and recaning with 4-5 mm half round 0.6 thick plastic cane made out of virgin plastic, in existing pattern complete. Rest all as specified and directed by engr-in-charge. ( Drg No. FD-359)
S&F PVC shoe suitable for chair verandah of approved quality.
Taking out u/s strips from Chair Verandah Offrs and S & F new strip of size 60mm wide x3mm thickness of appropriate length to chair verandha complete all as specified and directed by Engr -in - Charge. (Drg No.FD/E6/MAP/11)
M&L to repair Chair Writing MAP (made out of tapestry cloth) by replacing unserviceable parts as per drawing. Rest all as directed by engr-in-charg (Drg No.FD/E6/MAP/12) (i) Only tapestry cloth of seat and back complete.
ditto all as per item No 82 but for Tapestry cloth and foam of seat and back complete.
ditto all as per item No 82 but for Only Plywood of seat /back.
ditto all as per item No 82 but for Arms as requred by size and design. Note:- sample and shade of materials will be determined as per actual requirement at site.Cost of tapestry cloth shall not be less than180/-per meter.
MNF Set Painting of MNF set of charpoy GI pipe/newar with black colour synthetic enameled paint with brush including welding complete all as specified and directed.(FD-227/220)
Form Without Back Removing of UNSV wooden plank and S&F new plank made of 2nd class hard wood of size 1525x255x25mm thick fixed with GI nut & bolt 65mm x 6mm with washer complete all as specified and directed Drg. FD-1027.
Desk (FD-1021) Supply & fixing of the following components/parts of Desk including dismantling of unserviceable components all as specified and shown in drawings. Taking down UNSV the top and S&F new Top of Desk, made of 18mm thick prelaminated particle board of teak shade including 4 mm thick Teak wood beading in front complete.Rest all as per shown on drawing and complete all as specified and directed by Engineer - in- Charge.
ditto all as per item No 88 but for bottom portion complete all as specified and as directed by Engineer-in-Charge.
ditto all as per item No 88 but for Side portion complete all as specified and as directed by Engineer-in-Charge.
ditto all as per item No 88 but for back portion complete all as specified and as directed by Engineer - in- Charge.
Rack Shoe Steel (FD/E6/MAP/2(R) Supply & fixing new 25mm dia 18 guage thick MS pipe including necessary denting, repairing, turning, welding in replacement of unsv pipe of Rack Shoe steel. Rest all shown in drawing and complete all as specified and as directed by Engineer - in- Charge.
ditto all as per item No 92 but for taking out UNSV Jali with frame and S&F new Jali with frame including necessary denting, repairing, welding complete. Jali should be 3mm dia and frame 19mm dia 18 Guage thick. Rest all as per shown on drawing and complete all as specified and as directed by Engineer - in- Charge.
Chair School With Hand Board (FD/E6/MAP/05) Supply & fixing 18 mm thick pre laminated particle board top including 25 mm hollow steel pipe inserted in 20 mm MS rod welded to frame openable with PVC edging (Hinged on RHS) screwed to as in replacement of chiar school with hand board including dimantling of unsv components/parts complete all as specified and shown on drg as complete all as specified and as directed by Engineer - in- Charge.
Removing of unsv one piece PVC seat & back and S&F new moulded one piece PVC Seat & Back, complete all as specified and as directed by Engineer - in - Charge.
Taking out UNSV base tray (Jali) and S&F new base tray with welding complete. Rest all as per Drg FD/E6/MAP/05 and specified and directed.
Spot welding on various items of steel furniture FD/TP
Painting to Steel Furniture M&L for preparation of old painted iron and steel surface (Externally & internally complete) of almirah steel large with shelf/almirah steel large 1/2H 1/2 shelf FD-1031/FD/E6/MAP/18 by scraping & rubbing down with sand paper, removing dents & scratches, if any, filling the same with paste filter and applying a coat of synthetic enamel paint (1st gde quality) of approved colour brush or by spray machine complete all as specified and directed by Engr-in-charge.
ditto all as per item No 98 but for Almirah medium/small steel. Drg. No. (FD-1032/1034)
ditto all as per item No 98 but for Locker steel. Drg. No. FD-1029
ditto all as per item No 98 but for Table 900x600x760 steel with drawer. Drg. No. FD-1008. Note- Wooden portion shall be french polish with high gloss finish.
ditto all as per item No 98 but for Table 900x600x760 steel without drawer. Drg. No. FD-1007. Note- Wooden portion shall be french polish with high gloss finish.
ditto all as per item No 98 but for Table 900x900x760 steel. Drg. No. FD-1009. Note- Wooden portion shall be french polish with high gloss finish.
ditto all as per item No 98 but for Teapoy varandah steel. Drg. No. FD-383. Note- Wooden portion shall be french polish with high gloss finish.
ditto all as per item No 98 but for Teapoy varandah MAP. Drg. No. FD/E6/MAP/17. Note- Wooden portion shall be french polish with high gloss finish.
ditto all as per item No 98 but for Table office clerk steel., Drg. No. FD-1004/84(M). Note- Wooden portion shall be french polish with high gloss finish.
ditto all as per item No 98 but for Table office officer steel. , Drg. No. FD-1003/84(M). Note- Wooden portion shall be french polish with high gloss finish.
ditto all as per item No 98 but for Table dining OR steel. Drg.No.FD-165. Note- Wooden portion shall be french polish with high gloss finish.
ditto all as per item No 98 but for Chair CB steel with arms. Drg. No. FD-75(M). Note- Wooden portion shall be french polish with high gloss finish.
ditto all as per item No 98 but for Chair CB steel w/o arms. Drg. No. FD-75(M).
ditto all as per item No 98 but for Form without back, Drg. No. FD- 1027. Note- Wooden portion shall be french polish with high gloss finish.
ditto all as per item No 98 but for Desk. , Drg. No. FD-1021. Note- Wooden portion shall be french polish with high gloss finish.
ditto all as per item No 98 but for Rack shoe steel.FD/E6/MAP/02(R)
ditto all as per item No 98 but for Chair school with hand rest. FD/E6/MAP/05(R). Note- Wooden portion shall be french polish with high gloss finish.
M/S CHAWLA CONSTRUCTION COMPANY (BID ID -3403186)
VRTRADERS (BID ID -3404546)
shivam builders (BID ID -3401395)
B.L. Chaudhri and Co. (BID ID -3402310)
Dee Kay EnterPrises (BID ID -3402379)
M/S Pee Kay Builders (BID ID -3402859)
M/s Sarup Singh (BID ID -3404653)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .