NSMT 2025-2026

Dismandling damaged PCC road including all charges.

Providing formwork for all Rcc works of sides and soffits for plain surfaces of slabs, beams and columns with support and strutting up to 3.60m hight with all cross bracings using mild steel sheetof 90cm*60cm and stiffened with welded mild steel angle of size 25*25*3mm for boarding laid over silver oak joists of size 10cm to 6.50cmspaced at 90cm c\c and supported by casurina props of 10cm to 13cm dia spaced at 75cm c/c complying with standards specification. for Core wall

Plain Cement Concrete 1:2:4 Mix (one Part of cement, two Part of M- Sand and four Part of aggrigate) using 20 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc., complete as per TNDSS NO: 28 & VI (S2) VI (S5A) VII standard specifications

Supply and fabrication of Steel including cost and conveyance and all labour charges including all charges etc., completed.

Reinforced Cement Concrete 1:1-1/2:3 (One Cement, One and a half sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers

Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 100mm thick specification including premixing the materials with water at OMC in mechnanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH

Supplying and laying interlock paver of approved make as per at land surface using M40 grade concrete blocks its minimum thickness of 80 mm and providing minimum 150 mm thick stone Dust cushion below the pavers as sub base stone Dust filling between the Pavers and compaction by hydrualic compresive machine same as for Powers and capacity the same as directed by the departmental officers etc,complete as per standard specifications