CERTAIN REPAIR AND PAINTING OF STEEL FURNITURE AND MISCELLANEOUS WORKS AT ALWAR MIL STN UNDER GE ALWAR

Amount

Removing unserviceable tabletop and S & F the new tabletop made of prelaminated MDF board (decorative lamination on one side and other side balancing lamination), 18 mm thick, grade I or II & type III (Designation PLMDF-13 or PLMDF-23) including PVC edge banding made from thermoplastic resin in the furniture (Table (900 mm X 900 mm X 760 mm) (steel)) as per drawing No. FD-1009 complete all as specified and as directed.

Removing unserviceable leg and S & F the steel leg made of hot rolled carbon steel sheet as per IS 1079: 2009 or cold reduced low carbon steel sheet as per IS 513 (Part 1): 2016 having 1.6 mm thickness, any grade and designation in the furniture (Table (900 mm X 900 mm X 760 mm) (steel)) as per drawing No. FD-1009 complete all as specified and as directed.

Removing unserviceable PVC ring/shoe and S & F the new PVC ring/shoe in the furniture (Table (900 mm X 900 mm X 760 mm) (steel)) as per drawing No. FD-1009 complete all as specified and as directed.

Preparing steel surfaces and applying two coats of synthetic enamel paints over one coat of red oxide zinc chrome primer with spray machine including scrapping old paint, sanding, applying putty to steel surfaces in the furniture (Table (900 mm X 900 mm X 760 mm) (steel)) as per drawing No. FD-1009 complete all as specified and as directed.

Removing unserviceable tabletop and S & F the new tabletop made of prelaminated MDF board (decorative lamination on one side and other side balancing lamination), 18 mm thick, grade I or II & type III (Designation PLMDF-13 or PLMDF-23) including PVC edge banding made from thermoplastic resin in the furniture (Table with drawer (900 mm X 600 mm X 760 mm) (steel)) as per drawing No. FD-1008 complete all as specified and as directed.

Removing unserviceable tabletop and S & F the new tabletop made of prelaminated MDF board (decorative lamination on one side and other side balancing lamination), 18 mm thick, grade I or II & type III (Designation PLMDF-13 or PLMDF-23) including PVC edge banding made from thermoplastic resin in the furniture (Table for Havs & Ors (steel)) as per drawing No. FD-1007 complete all as specified and as directed.

Removing unserviceable leg and S & F the steel leg made of hot rolled carbon steel sheet as per IS 1079: 2009 or cold reduced low carbon steel sheet as per IS 513 (Part 1): 2016 having 1.6 mm thickness, any grade and designation in the furniture (Table with drawer (900 mm X 600 mm X 760 mm) (steel)) as per drawing No. FD-1008 complete all as specified and as directed.

Removing unserviceable leg and S & F the steel leg made of hot rolled carbon steel sheet as per IS 1079: 2009 or cold reduced low carbon steel sheet as per IS 513 (Part 1): 2016 having 1.6 mm thickness, any grade and designation in the furniture (Table for Havs & Ors (steel)) as per drawing No. FD-1007 complete all as specified and as directed.

Removing unserviceable locks and S & F the new brass lock, 6 levers with duplicate keys in the furniture (Table with drawer (900 mm X 600 mm X 760 mm) (steel)) as per drawing No. FD-1008 complete all as specified and as directed.

Removing unserviceable steel drawer and S & F the steel drawer made of hot rolled carbon steel sheet as per IS 1079: 2009 or cold reduced low carbon steel sheet as per IS 513 (Part 1): 2016 having 1 mm thickness, any grade and designation in the furniture (Table with drawer (900 mm X 600 mm X 760 mm) (steel)) as per drawing No. FD-1008 complete all as specified and as directed.

Preparing steel surfaces and applying two coats of synthetic enamel paints over one coat of red oxide zinc chrome primer with spray machine including scrapping old paint, sanding, applying putty to steel surfaces in the furniture (Table with drawer (900 mm X 600 mm X 760 mm) (steel)) as per drawing No. FD-1008 complete all as specified and as directed.

Preparing steel surfaces and applying two coats of synthetic enamel paints over one coat of red oxide zinc chrome primer with spray machine including scrapping old paint, sanding, applying putty to steel surfaces in the furniture (Table for Havs & Ors (steel)) as per drawing No. FD-1007 complete all as specified and as directed.

Removing unserviceable tabletop and S & F the new tabletop made of stainless steel sheet shall be of grade X02Cr19Ni10 (304 S2), surface finish No. 4 as per IS 6911: 2017 in the furniture (Table with stainless steel top (1670 mm X 760 mm X 750 mm) (steel)) as per drawing No. FD-1012 complete all as specified and as directed.

Removing unserviceable PVC ring/shoe and S & F the new PVC ring/shoe in the furniture (Table with stainless steel top (1670 mm X 760 mm X 750 mm) (steel)) as per drawing No. FD-1012 complete all as specified and as directed.

Preparing steel surfaces and applying two coats of synthetic enamel paints over one coat of red oxide zinc chrome primer including scrapping old paint, sanding, applying putty to steel surfaces in the furniture (Table with stainless steel top (1670 mm X 760 mm X 750 mm) (steel)) as per drawing No. FD-1012 complete all as specified and as directed.

Removing unserviceable seat and S & F the new seat made of 12 mm thick hot pressed plywood upholstered with polyester fabric of approved colour and moulded polyurethane foam (50 mm thick density 50-55 Kg/Cum hardness 20 ± 2 kg on Hampden machine) with PVC lipping all-round seat in the furniture (Chair Computer) as per drawing No. FD/E6/MAP/01 complete all as specified and as directed.

Removing unserviceable back and S & F the new back made of 12 mm thick hot pressed plywood upholstered with polyester fabric of approved colour and moulded polyurethane foam (50 mm thick density 50-55 Kg/Cum hardness 20 ± 2 kg on Hampden machine), designed with contour lumbar support for extra comfort with PVC lipping all-round back in the furniture (Chair Computer) as per drawing No. FD/E6/MAP/01 complete all as specified and as directed.

Removing unserviceable armrest and S & F the new armrest made of black integral skin polyurethane with 75-85 shore 'A' hardness and reinforced with mild steel insert, scratch and weather resistant, in single piece in the furniture (Chair Computer) as per drawing No. FD/E6/MAP/01 complete all as specified and as directed.

Removing unserviceable twin wheel castor and S & F the new twin wheel castor with load capacity minimum 200 kg in the furniture (Chair Computer) as per drawing No. FD/E6/MAP/01 complete all as specified and as directed.

Removing unserviceable pedestal assembly and S & F the new pedestal assembly made of injection moulded in black 30% glass filled nylon, 10.5 mm dia forged bright zinc plated mild steel castor pin press fitted into each prong for holding the castor in the furniture (Chair Computer) as per drawing No. FD/E6/MAP/01 complete all as specified and as directed.

Removing unserviceable upper drawer and S & F the new upper drawer, front part made of prelaminated MDF board (decorative lamination on one side and other side balancing lamination), 18 mm thick, grade I or II & type III (Designation PLMDF-13 or PLMDF-23), other parts made of 12 mm thick, 7 ply, BWR grade, AA type plywood, including PVC edge banding made from thermoplastic resin, duly supported on one pair (2 Nos) high precision telescopic channel made of mild steel 1.25 mm thick of 45 kg capacity to be designed as per drawer size and to meet the weight requirement to ensure smooth movements of drawer with /without content weights in the furniture (Table bed Side) as per drawing No. FD/E6/MAP/15(R) complete all as specified and as directed.

Removing unserviceable lower drawer and S & F the new lower drawer, front part made of prelaminated MDF board (decorative lamination on one side and other side balancing lamination), 18 mm thick, grade I or II & type III (Designation PLMDF-13 or PLMDF-23), other parts made of 12 mm thick, 7 ply, BWR grade, AA type plywood, including PVC edge banding made from thermoplastic resin, duly supported on one pair (2 Nos) high precision telescopic channel made of mild steel 1.25 mm thick of 45 kg capacity to be designed as per drawer size and to meet the weight requirement to ensure smooth movements of drawer with /without content weights in the furniture (Table bed Side) as per drawing No. FD/E6/MAP/15(R) complete all as specified and as directed.

Removing unserviceable handle and S & F the new chromium plated brass flush drop handle of 100 mm size with fixing holes in the furniture (Table bed Side) as per drawing No. FD/E6/MAP/15(R) complete all as specified and as directed.

Removing unserviceable tabletop and S & F the new tabletop made of prelaminated MDF board (decorative lamination on one side and other side balancing lamination), 18 mm thick, grade I or II & type III (Designation PLMDF-13 or PLMDF-23) including PVC edge banding made from thermoplastic resin in the furniture (Table bed Side) as per drawing No. FD/E6/MAP/15(R) complete all as specified and as directed.

Preparing steel surfaces and applying two coats of synthetic enamel paints over one coat of red oxide zinc chrome primer with spray machine including scrapping old paint, sanding, applying putty to steel surfaces in the furniture (Table bed Side) as per drawing No. FD/E6/MAP/15(R) complete all as specified and as directed.

Removing unserviceable seat and S & F the new seat made of 12 mm thick hot pressed plywood upholstered with polyester fabric of approved colour and moulded polyurethane foam (50 mm thick density 50-55 Kg/Cum hardness 20 ± 2 kg on Hampden machine) with PVC lipping all-round seat in the furniture (Chair Writing) as per drawing No. FD/E6/MAP/12 complete all as specified and as directed.

Removing unserviceable back and S & F the new back made of 12 mm thick hot pressed plywood upholstered with polyester fabric of approved colour and moulded polyurethane foam (50 mm thick density 50-55 Kg/Cum hardness 20 ± 2 kg on Hampden machine), designed with contour lumbar support for extra comfort with PVC lipping all-round back in the furniture (Chair Writing) as per drawing No. FD/E6/MAP/12 complete all as specified and as directed.

Removing unserviceable armrest and S & F the new armrest made of black integral skin polyurethane with 75-85 shore 'A' hardness and reinforced with mild steel insert, scratch and weather resistant, in single piece in the furniture (Chair Writing) as per drawing No. FD/E6/MAP/12 complete all as specified and as directed.

Removing unserviceable nut and bolt and S & F the new nut and bolt in the furniture (Chair Writing) as per drawing No. FD/E6/MAP/12 complete all as specified and as directed.

Preparing steel surfaces and applying two coats of synthetic enamel paints over one coat of red oxide zinc chrome primer with spray machine including scrapping old paint, sanding, applying putty to steel surfaces in the furniture (Chair Writing) as per drawing No. FD/E6/MAP/12 complete all as specified and as directed.

Removing unserviceable tabletop and S & F the new tabletop made of prelaminated MDF board (decorative lamination on one side and other side balancing lamination), 18 mm thick, grade I or II & type III (Designation PLMDF-13 or PLMDF-23) including PVC edge banding made from thermoplastic resin in the furniture (Table Computer) as per drawing No. FD/E6/MAP/03 complete all as specified and as directed.

Removing unserviceable keyboard tray and S & F the new keyboard tray made of prelaminated MDF board (decorative lamination on one side and other side balancing lamination), 18 mm thick, grade I or II & type III (Designation PLMDF-13 or PLMDF-23) including PVC edge banding made from thermoplastic resin in the furniture (Table Computer) as per drawing No. FD/E6/MAP/03 complete all as specified and as directed.

Removing unserviceable drawer and S & F the new drawer made of prelaminated MDF board (decorative lamination on one side and other side balancing lamination), 18 mm thick, grade I or II & type III (Designation PLMDF-13 or PLMDF-23), other parts made of 12 mm thick, 7 ply, BWR grade, AA type plywood, including PVC edge banding made from thermoplastic resin in the furniture (Table Computer) as per drawing No. FD/E6/MAP/03 complete all as specified and as directed.

Removing unserviceable telescopic channel (one pair) and S & F the new high precision telescopic channel made of mild steel 1.25 mm thick to be designed as per drawer size and to meet the weight requirement to ensure smooth movements of drawer with /without content weights in the furniture (Table Computer) as per drawing No. FD/E6/MAP/03 complete all as specified and as directed.

Removing unserviceable handle and S & F the new chromium plated handle with fixing holes in the furniture (Table Computer) as per drawing No. FD/E6/MAP/03 complete all as specified and as directed.

Removing unserviceable PVC ring/shoe and S & F the new PVC ring/shoe in the furniture (Table Computer) as per drawing No. FD/E6/MAP/03 complete all as specified and as directed.

Preparing steel surfaces and applying two coats of synthetic enamel paints over one coat of red oxide zinc chrome primer with spray machine including scrapping old paint, sanding, applying putty to steel surfaces in the furniture (Table Computer) as per drawing No. FD/E6/MAP/03 complete all as specified and as directed.

Removing unserviceable seat or back and S & F the new seat or back made of PVC, 4 mm thick with weight not less than 1.85 Kg and grooves 90 mm X 10 mm 10 Nos in the furniture (Chair verandah) as per drawing No. FD/MAP-II/06 complete all as specified and as directed.

Removing unserviceable PVC ring/shoe and S & F the new PVC ring/shoe in the furniture (Chair verandah) as per drawing No. FD/MAP-II/06 complete all as specified and as directed.

Preparing steel surfaces and applying two coats of synthetic enamel paints over one coat of red oxide zinc chrome primer with spray machine including scrapping old paint, sanding, applying putty to steel surfaces in the furniture (Chair verandah) as per drawing No. FD/MAP-II/06 complete all as specified and as directed.

Removing unserviceable locks and S & F the new brass lock, 6 levers with duplicate keys in the furniture (Almirah large steel) as per drawing No: FD-1031 complete all as specified and as directed.

Removing unserviceable handle and S & F the new chromium plated handle in the furniture (Almirah large steel) as per drawing No: FD-1031 complete all as specified and as directed.

Removing unserviceable cleat for shelf and S & F the new cleat for shelf in the furniture (Almirah large steel) as per drawing No: FD-1031 complete all as specified and as directed.

Removing unserviceable locking vertical rod complete assembly and S & F the new locking vertical rod complete assembly in the furniture (Almirah large steel) as per drawing No: FD-1031 complete all as specified and as directed.

Removing unserviceable shutters left/ right sheet and S & F the new shutters left/ right sheet in the furniture (Almirah large steel) as per drawing No: FD-1031 complete all as specified and as directed.

Removing unserviceable leg and S & F the new leg in the furniture (Almirah large steel) as per drawing No: FD-1031 complete all as specified and as directed.

Removing unserviceable shelf and S & F the new shelf in the furniture (Almirah large steel) as per drawing No: FD-1031 complete all as specified and as directed.

Preparing steel surfaces and applying two coats of synthetic enamel paints over one coat of red oxide zinc chrome primer with spray machine including scrapping old paint, sanding, applying putty to steel surfaces in the furniture (Almirah large steel) as per drawing No: FD-1031 complete all as specified and as directed.

Removing unserviceable locks and S & F the new brass lock, 6 levers with duplicate keys in the furniture (Almirah small/ medium steel) as per drawing No: FD-1032 complete all as specified and as directed.

Removing unserviceable hinge and S & F the new hinge, 75 mm size in the furniture (Almirah small/ medium steel) as per drawing No: FD-1032 complete all as specified and as directed.

Removing unserviceable handle and S & F the new chromium plated handle in the furniture (Almirah small/ medium steel) as per drawing No: FD-1032 complete all as specified and as directed.

Removing unserviceable leg and S & F the new leg in the furniture (Almirah small/ medium steel) as per drawing No: FD-1032 complete all as specified and as directed.

Removing unserviceable shelf and S & F the new shelf in the furniture (Almirah small/ medium steel) as per drawing No: FD-1032 complete all as specified and as directed.

Preparing steel surfaces and applying two coats of synthetic enamel paints over one coat of red oxide zinc chrome primer with spray machine including scrapping old paint, sanding, applying putty to steel surfaces in the furniture (Almirah small/ medium steel) as per drawing No: FD-1032 complete all as specified and as directed.

Removing unserviceable canning/newar of seat and S & F the new canning of seat using polyethylene cane of Type-I as per IS 5378: 1994, 2 mm (width) X 0.40 mm (thick) polyethylene can for seat and 3.5 mm (width) X 0.50 mm (thick) polyethylene cane for border, weaved in pre-woven pattern in the furniture (chair verandah with nylon newar) as per drawing No: FD-256 complete all as specified and as directed.

Removing unserviceable canning/newar of back and S & F the new canning of back using polyethylene cane of Type-I as per IS 5378: 1994, 2 mm (width) X 0.40 mm (thick) polyethylene can for seat and 3.5 mm (width) X 0.50 mm (thick) polyethylene cane for border, weaved in pre-woven pattern in the furniture (chair verandah with nylon newar) as per drawing No: FD-256 complete all as specified and as directed.

Removing unserviceable PVC ring/shoe and S & F the new PVC ring/shoe in the furniture (chair verandah with nylon newar) as per drawing No: FD-256 complete all as specified and as directed.

Preparing steel surfaces and applying two coats of synthetic enamel paints over one coat of red oxide zinc chrome primer with spray machine including scrapping old paint, sanding, applying putty to steel surfaces in the furniture (chair verandah with nylon newar) as per drawing No: FD-256 complete all as specified and as directed.

Removing unserviceable tabletop and S & F the new tabletop made of prelaminated MDF board (decorative lamination on one side and other side balancing lamination), 18 mm thick, grade I or II & type III (Designation PLMDF-13 or PLMDF-23) including PVC edge banding made from thermoplastic resin in the furniture (Table office (officers) (steel)) as per drawing No. FD-84(M) complete all as specified and as directed.

Removing unserviceable tabletop and S & F the new tabletop made of prelaminated MDF board (decorative lamination on one side and other side balancing lamination), 18 mm thick, grade I or II & type III (Designation PLMDF-13 or PLMDF-23) including PVC edge banding made from thermoplastic resin in the furniture (Table office (clerk/general) (steel)) as per drawing No. FD-84(M) complete all as specified and as directed.

Removing unserviceable tabletop and S & F the new tabletop made of prelaminated MDF board (decorative lamination on one side and other side balancing lamination), 18 mm thick, grade I or II & type III (Designation PLMDF-13 or PLMDF-23) including PVC edge banding made from thermoplastic resin in the furniture (Table office (typist) (steel) as per drawing No. FD-84(M)) complete all as specified and as directed.

Removing unserviceable leg and S & F the steel leg (25 mm square tube) made of hot rolled carbon steel sheet as per IS 1079: 2009 or cold reduced low carbon steel sheet as per IS 513 (Part 1): 2016 having 1.6 mm thickness, any grade and designation in the furniture (Table office (officers) (steel)) as per drawing No. FD-84(M) complete all as specified and as directed.

Removing unserviceable leg and S & F the steel leg (25 mm square tube) made of hot rolled carbon steel sheet as per IS 1079: 2009 or cold reduced low carbon steel sheet as per IS 513 (Part 1): 2016 having 1.6 mm thickness, any grade and designation in the furniture (Table office (clerk/general) (steel)) as per drawing No. FD-84(M) complete all as specified and as directed.

Removing unserviceable leg and S & F the steel leg (25 mm square tube) made of hot rolled carbon steel sheet as per IS 1079: 2009 or cold reduced low carbon steel sheet as per IS 513 (Part 1): 2016 having 1.6 mm thickness, any grade and designation in the furniture (Table office (typist) (steel) as per drawing No. FD-84(M)) complete all as specified and as directed.

Removing unserviceable locks and S & F the new brass lock, 6 levers with duplicate keys in the furniture (Table office (officers) (steel)) as per drawing No. FD-84(M) complete all as specified and as directed.

Removing unserviceable locks and S & F the new brass lock, 6 levers with duplicate keys in the furniture (Table office (clerk/general) (steel)) as per drawing No. FD-84(M) complete all as specified and as directed.

Removing unserviceable locks and S & F the new brass lock, 6 levers with duplicate keys in the furniture (Table office (typist) (steel) as per drawing No. FD-84(M)) complete all as specified and as directed.

Removing unserviceable steel drawer and S & F the steel drawer made of hot rolled carbon steel sheet as per IS 1079: 2009 or cold reduced low carbon steel sheet as per IS 513 (Part 1): 2016 having 1 mm thickness, any grade and designation in the furniture (Table office (officers) (steel)) as per drawing No. FD-84(M) complete all as specified and as directed.

Removing unserviceable steel drawer and S & F the steel drawer made of hot rolled carbon steel sheet as per IS 1079: 2009 or cold reduced low carbon steel sheet as per IS 513 (Part 1): 2016 having 1 mm thickness, any grade and designation in the furniture (Table office (clerk/general) (steel)) as per drawing No. FD-84(M) complete all as specified and as directed.

Removing unserviceable steel drawer and S & F the steel drawer made of hot rolled carbon steel sheet as per IS 1079: 2009 or cold reduced low carbon steel sheet as per IS 513 (Part 1): 2016 having 1 mm thickness, any grade and designation in the furniture (Table office (clerk/general) (steel)) as per drawing No. FD-84(M) complete all as specified and as directed.

Preparing steel surfaces and applying two coats of synthetic enamel paints over one coat of red oxide zinc chrome primer with spray machine including scrapping old paint, sanding, applying putty to steel surfaces in the furniture (Table office (officers) (steel)) as per drawing No. FD-84(M) complete all as specified and as directed.

Preparing steel surfaces and applying two coats of synthetic enamel paints over one coat of red oxide zinc chrome primer with spray machine including scrapping old paint, sanding, applying putty to steel surfaces in the furniture (Table office (clerk/general) (steel)) as per drawing No. FD-84(M) complete all as specified and as directed.

Preparing steel surfaces and applying two coats of synthetic enamel paints over one coat of red oxide zinc chrome primer with spray machine including scrapping old paint, sanding, applying putty to steel surfaces in the furniture (Table office (clerk/general) (steel)) as per drawing No. FD-84(M) complete all as specified and as directed.

Removing unserviceable hinge and S & F the new hinge, 75 mm size in the furniture (locker steel) as per drawing No: FD-1029 complete all as specified and as directed.

Removing unserviceable hasp and staple and S & F the new hasp and staple in the furniture (locker steel) as per drawing No: FD-1029 complete all as specified and as directed.

Removing unserviceable handle and S & F the new chromium plated handle in the furniture (locker steel) as per drawing No: FD-1029 complete all as specified and as directed.

Removing unserviceable shelf and S & F the new shelf in the furniture (locker steel) as per drawing No: FD-1029 complete all as specified and as directed.

Removing unserviceable conduit pipe and S & F the new conduit pipe in the furniture (locker steel) as per drawing No: FD-1029 complete all as specified and as directed.

Preparing steel surfaces and applying two coats of synthetic enamel paints over one coat of red oxide zinc chrome primer with spray machine including scrapping old paint, sanding, applying putty to steel surfaces in the furniture (locker steel) as per drawing No: FD-1029 complete all as specified and as directed.

Removing unserviceable handle and S & F the new chromium plated handle in the furniture (Book case (steel)) as per drawing No. FD-1028 complete all as specified and as directed.

Preparing steel surfaces and applying two coats of synthetic enamel paints over one coat of red oxide zinc chrome primer with spray machine including scrapping old paint, sanding, applying putty to steel surfaces in the furniture (Book case (steel)) as per drawing No. FD-1028 complete all as specified and as directed.

Preparing steel surfaces and applying two coats of synthetic enamel paints over one coat of red oxide zinc chrome primer with spray machine including scrapping old paint, sanding, applying putty to steel surfaces in the furniture (chair CB office with arms) as per drawing No: FD-75(M) complete all as specified and as directed.

Preparing steel surfaces and applying two coats of synthetic enamel paints over one coat of red oxide zinc chrome primer with spray machine including scrapping old paint, sanding, applying putty to steel surfaces in the furniture (chair CB office without arms) as per drawing No: FD-75(M) complete all as specified and as directed.

Preparing steel surfaces and applying two coats of synthetic enamel paints over one coat of red oxide zinc chrome primer with spray machine including scrapping old paint, sanding, applying putty to steel surfaces in the furniture (Form without back (1525 mm long)) as per drawing No. FD-77(M) complete all as specified and as directed.

Preparing steel surfaces and applying two coats of synthetic enamel paints over one coat of red oxide zinc chrome primer with spray machine including scrapping old paint, sanding, applying putty to steel surfaces in the furniture (Form without back (1900 mm long)) as per drawing No. FD-77(M) complete all as specified and as directed.

Preparing steel surfaces and applying two coats of synthetic enamel paints over one coat of red oxide zinc chrome primer with spray machine including scrapping old paint, sanding, applying putty to steel surfaces in the furniture (Form with back (1800 mm long)) as per drawing No. FD-78(M) complete all as specified and as directed.

Preparing steel surfaces and applying two coats of synthetic enamel paints over one coat of red oxide zinc chrome primer with spray machine including scrapping old paint, sanding, applying putty to steel surfaces in the furniture (Chair School with hand board) as per drawing No. FD/E6/MAP/05 complete all as specified and as directed.

Preparing steel surfaces and applying two coats of synthetic enamel paints over one coat of red oxide zinc chrome primer with spray machine including scrapping old paint, sanding, applying putty to steel surfaces in the furniture (Stool 305 mm X 305 mm X 510 mm (steel)) as per drawing No. FD-81(M) complete all as specified and as directed.

Preparing steel surfaces and applying two coats of synthetic enamel paints over one coat of red oxide zinc chrome primer with spray machine including scrapping old paint, sanding, applying putty to steel surfaces in the furniture (Stool 305 mm X 305 mm X 760 mm (steel)) as per drawing No. FD-81(M) complete all as specified and as directed.

Preparing steel surfaces and applying two coats of synthetic enamel paints over one coat of red oxide zinc chrome primer with spray machine including scrapping old paint, sanding, applying putty to steel surfaces in the furniture (Book shelf open (large) steel) as per drawing No. FD-69(M) complete all as specified and as directed.

Preparing steel surfaces and applying two coats of synthetic enamel paints over one coat of red oxide zinc chrome primer with spray machine including scrapping old paint, sanding, applying putty to steel surfaces in the furniture (Book shelf open (small) steel) as per drawing No. FD-69(M) complete all as specified and as directed.

Preparing steel surfaces and applying two coats of synthetic enamel paints over one coat of red oxide zinc chrome primer with spray machine including scrapping old paint, sanding, applying putty to steel surfaces in the furniture Rack (adjustable 6 tiers) steel as per drawing No. FD-106(M) complete all as specified and as directed.

Preparing steel surfaces and applying two coats of synthetic enamel paints over one coat of red oxide zinc chrome primer with spray machine including scrapping old paint, sanding, applying putty to steel surfaces in the furniture Rack (adjustable 3 tiers) steel as per drawing No. FD-106(M) complete all as specified and as directed.

Hitesh Construction

KHAZAN SINGH SAWHNEY

B.S Constructions