138WE/L-123/2025-26

S&F 25mm dia 3 layer PP-R polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete all as per manufacture instructions and as directed by Engineer in Charge and including taking up or down 25 mm bore steel tubing / PPR pipe and connections, complete all as specified and/or as directed by Engr-in-Charge.

S&F 32mm dia 3 layer PP-R polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having theRmal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete all as per manufacture instructions and as directed by Engineer in Charge and including taking up or down 32 mm bore steel tubing / PPR pipe and connections, complete all as specified and/or as directed by Engr-in-Charge.

S&F 250 litres capacity rotational moulded polyethylene water storage tanks inner and out white, two layers ISI marked (Cylindrical vertical, with closed top), hoisted with threaded cap and fixed in position all as specified in SSR Part I including all accessories (i.e. GI nipple etc), including provn of 20/25 mm dia spout for connecting inlet, outlet, over flow and washout pipes and including dismantling water tanks and removing to store not exc 250 ltrs capacity complete all as specified and/or as directed by Engr-in-Charge.

S&F 500 litres capacity rotational moulded polyethylene water storage tanks inner and out white, two layers ISI marked (Cylindrical vertical, with closed top), hoisted with threaded cap and fixed in position all as specified in SSR Part I including all accessories (i.e. GI nipple etc), including provn of 20/25 mm dia spout for connecting inlet, outlet, over flow and washout pipes and including dismantling water tanks and removing to store exc 250 and not exc 500 ltrs capacity complete all as specified and as directed by Engr-in-Charge.

S&F 1000 litres capacity rotational moulded polyethylene water storage tanks inner and out white, two layers ISI marked (Cylindrical vertical, with closed top) hoisted with threaded cap and fixed in position all as specified in SSR Part I including all accessories (i.e. GI nipple etc), including provn of 20/25 mm dia spout for connecting inlet, outlet, over flow and washout pipes and including dismantling water tanks and removing to store exc 500 and not exc 1000 ltrs capacity complete all as specified and/or as directed by Engr-in-Charge.

S&F in repair chromium plated brass bib tap fancy type screwed down, screwed for iron pipe or for brass ferrule 15 mm bore complete all as specified and/or as directed by Engr-in-Charge.

S&F in repair fancy type 15 mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and/or as directed by Engr-in-Charge.

S&F in repair fancy type, chromium plated 20 mm bore stop valves, cast copper alloy screwed down high pressure screwed both ends for iron pipe or for unions complete all as specified and/or as directed by Engr-in-Charge.

S&F in repairs 750 mm long, 32/ 40 mm dia., PVC plain Waste pipe for sinks/ wash hand basins complete all as specified and/or as directed by Engr-in-Charge.

S&F in repairs, 32 mm waste coupling of CP brass for sink and wash hand basin complete all as specified and directed (Half or full threaded ).

S&F Vitreous china wash basin white flat back size 600 x 480 mm excluding taps, waste, chain, plug and porcelain stopper including CI brackets of angle iron 65 x 65 x 6mm embeded in PCC block with PCC 1:2:4 type B-1 & CP grating with holes fixed in repairs complete all as specified and directed. Make : Jaquar/Cera or equivalent approved makes as approved by the GE.

S&F in repairs vitreous China squatting pan or Orissa pattern 580 x 440 mm white with integral foot rest (excluding cistern and flush pipe) but including connection to 100mm dia trap 'P' or 'S', anti syphonage pipe etc. complete all as specified and as directed by Engr-in-Charge. Make : Jaquar/Cera or equivalent approved makes as approved by the GE.

S&F in repair Vitreous china wash down water closet (Pedestal), white (EWC) excluding fixing bolts, flushing cistern and flush pipe) including plastic water closet seat, black closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device including connection to drain pipe and to flushing pipe anti-siphonage pipe etc. complete all as specified and directed by Engr-in-Charge. Make : Jaquar, Cera or equivalent approved makes as approved by the GE.

Supply only 15 mm bore, PVC connection pipe 600 mm long with PTMT nuts at both ends complete all as specified and directed.

Supply only 10 litres capacity PVC valveless symphonic action type, flushing cistern (ISI marked), low level, white, with inlet, ball valve, float and handle including bracket & flush pipe of polyethylene of low or high density or high density or PVC, 32mm dia, complete all as specified & directed by Engr-in-charge.

S&F in repairs, 10 litres capacity PVC valveless symphonic action type, flushing cistern (ISI marked), low level, white, with inlet, ball valve, float and handle including bracket & flush pipe of polyethylene of low or high density or high density or PVC, 32mm dia, complete all as specified & directed by Engr-in-charge.

S&F in repairs, PVC (SWR) 75 mm dia, floor trap, plain with grating including jointing to waste pipe with solvent cement complete all as specified & directed.

S&F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook including making connections and fixed in position completed all as specified and directed. Make : Jaquar/Cera or equivalent approved makes as approved by the GE.

S&F in repair tubular towel rail, 20mm dia 600mm long of aluminium fixed and including chromium plated brass screw and wooden/ plastic cleats (min weight 270gms) D type 4, complete all as specified and directed by Engr-in-charge.Make : Jaquar/Cera or equivalent approved makes as approved by the GE.

S&F in repair CP floor gratings 150mm dia all as directed by the Engr-in-Charge

S&F in repair fancy type glass corner self with CP brackets etc complete all as specified and directed. Make : Jaquar/Cera or equivalent approved makes as approved by the GE.

S&F in repair chromium plated brass soap dish (Oval shape) to walls (size not less than 125mm long) fix to wall complete all as specified and directed by Engr-in-Charge.

S&F in repair CP wall mixer 3-in-1 system with provision for bath telephone shower and over head shower with bend pipe complete all as specified and directed by the Engr-in-Charge. Make:- Cat Part SHFLR 5281 of Jaquar/ Cera or equivalent approved makes as approved by the GE.

S&F in repair 4.80 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/ spring clips and providing new pins/ spring clips, complete all as specified and directed by Engr -in-Charge.

S&F stainless steel wall mounted kitchen plate rack made of stainless steel 0.80mm thick sheet standard size 750x900x250mm and design as approved by Engr in charge and fixed to wall with wooden plug & screw (fixed in repair) complete all as specified and directed by Engr-in-Charge.

S&F in repair two way angle cock, fancy type chromium plated with long shank and cup (two way angle valve type) cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions for bore of pipe 15mm complete all as specified and directed by Engr-in-Charge. Make:-Garnet two way angle cock Quarter turn of Cera or equivalent approved makes as approved by the GE.

M & L Non-skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortar 1:4 screed bed or bedding layer of mortar and dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surfaces of size 450x350x7mm/ 350x250x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including rendering 10 mm thick in cement mortar (1:4) as in backing coat incl dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and/or as directed by Engr-in-Charge.

S&F in repair 25mm outer dia PPR Gate valve (Brass insert) conforming to ISO 2000 high pressure with epoxy coated aluminium rod and high density plastic ball screwed for PPR pipe or for union and fixed as per requirement of site completely all as specified and directed by the Engr-in-Charge.

S&F in repair 32mm outer dia PPR Gate valve (Brass insert) conforming to ISO 2000 high pressure with epoxy coated aluminium rod and high density plastic ball screwed for PPR pipe or for union and fixed as per requirement of site completely all as specified and directed by the Engr-in-Charge.

S&F in repair 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight -210gms) complete all as specified and directed.

S&F in repair 25mm outer dia PPR Ball valve (Brass insert) conforming to ISO 2000 high pressure with epoxy coated aluminium rod and high density plastic ball screwed for PPR pipe or for union and fixed as per requirement of site completely all as specified and directed by the Engr-in-Charge.

Taking down chowkhats/ frames with shutters (without taking off shutters from the frames) area not exc 1.5 Sqm each complete all as directed by Engr-in-charge.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as directed by Engr-in-charge.

Taking down shutters of any description area exceeding 1 Sqm and not exceeding 2 Sqm each complete all as directed by Engr-in-charge.

All as per Serial item No. 37 above, but size not exc 1.0 sqm complete all as directed by Engr-in-charge

Taking down shutters of any description area not exceeding 1 Sqm each, resecuring or easing & adjusting and refixing in the same opening complete all as directed by Engr-in-charge.

Taking down shutters of any description area exceeding 1 Sqm and not exceeding 2 Sqm each, resecuring or easing & adjusting and refixing in the same opening complete all as directed by Engr-in-charge.

S&F Powder coated aluminium frame of standard section for doors, windows, ventilators with double rebates including joining cleat for fixing etc(minimum thickness of powder coating 50 micron) complete all as directed by Engr-in-charge.

M&L for powder coated aluminium door shutters, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws, hinge type B-21 100mm long (3 no.) suitable handle (2 no.) (Glass / Wiremesh should be measured separately) complete all as specified(minimum thickness of powder coating not less than 50 micron), complete all as directed by Engr-in-charge.

M&L for powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) (glass / wiremesh should be measured and paid separately) (minimum thickness of powder coating not less than 50 micron).complete all as directed by Engr-in-charge.

S&F for 30 mm thick 2nd class soft wood plain framed panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, supply and fixed to chowkhats, complete all as directed by Engr-in-charge.

S&F for 40 mm thick flush shutters, solid core construction, with block board core and plywood face panels commercial type on both sides, supply and fixed to chowkhats, complete all as directed by Engr-in-charge.

S&F 2nd class soft wood 35 mm thick glazed and gkelton shutter, open and prepared to receive the glass, gauze etc. (without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc. (Glass / Wiremesh should be measured separately) complete all as specified and as directed by the Engr-in-Charge.

S&F in repairs Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples.

M&L for preparation of new or old untreated wood or wood based surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for hard wood 2nd class factory made wooden boarded floors 10mm thick and skirtings planed one side & edges tonged and grooved or rebated, including backing with thermocol sheets or as specified by manufacturers including dismantling existing one all as specified and directed.

S&F mild steel butt hinges, medium weight cold rolled 100mm size complete all as specified and as directed.

S&F mild steel butt hinges, medium weight cold rolled 75mm size complete all as specified and as directed.

S&F 150mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed.

S&F 100mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed.

S&F 150mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed.

S&F 100mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed.

S&F 250mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy fixed complete all as specified and as directed.

S&F in repair aluminium door closer (aluminium extruded section) hydraulically regulated designation No 3, universal type, suitable for door shutter of 851 mm to 1000 in width and of weight 61 to 80 kg, complete all as specified and as directed.

S&F in repair 19mm dia mild steel, chromium plated curtain rods with brackets and end bulbs complete all as specified and as directed.

S&F floor door stopper 150mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed complete all as specified and as directed.

M&L for 2nd class soft wood clean sawn as in battens for grids of ceiling & lining fixed with nails exc 13 sqcm and not exc 25 sqcm in section including dismantling, complete all as specified and as directed.

M&L for covered fillets of standard hard board not less than 6mm thick and up to 40mm wide and fixing with screws including dismantling complete all as specified and as directed.

M&L 6mm (5 No's ply) thick veneered decorative (Knotty Pine) plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed with nails to timber frame work, including dismantling complete all as specified and as directed.

All as per Serial item No. 62 above, but on ceiling.

M&L for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorated choice lamination & other side balancing white lamination fixed with screws to timber frame work as in wall panelling, shelves/boarding including dismantling complete all as specified and as directed.

All as per Serial item No. 64 above, but on ceiling.

M&L french polishing on wood or wood based surface of any width or girth or any description, including cleaning and preparing the surface including a coat of wood filler on new surface with two or more coats complete all as specified and as directed.

S&F anodised aluminium snap grid of size 605mm x 605mm frame work of false ceiling including hanger 6mm dia GI (up to 1200 mm length) adjusting level fixed to roof slabs by means of ceiling clearts made out of GI flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5 mm dia 40mm long complete all as specified and directed by Engr-in-charge.

M & L providing and fixing Gypsum board 12mm thick and 600 x 600 mm in size in ceiling fixed with screw or with staples on snap grid as per manufactured instructions including dismantling complete all as specified and directed by Engr-in-charge.

M&L for cleaning of blocked cast iron / PVC pipes of bore 100 to 150 mm dia pouring hot water, rodding from trap to manholes to septic tank with iron rod, jute bags etc and well flushing with water mechanically or manually using with cleaning materials including manholes and removing of waste material to out of defence land complete all as specified and directed. Note :- The cost of cleaning material and and earth work for pits is deemed to be included in the unit rate.

M&L for cleaning of blocked/ Ice frozen drain pipes 100 mm to 200 mm bore by pouring hot water, rodding from trap to manholes to septic tank or vice versa and well flushing with water after cleaning including manholes and removing of waste material to a distance not exc 50 m and burying in pits and refilling the same complete all as specified and directed by Engr-in-Charge. Note :- The cost of cleaning material and and earth work for pits is deemed to be included in the unit rate of this item.

M&L for cleaning of blocked cast iron / PVC pipes of bore 50 to 75 mm dia pouring hot water, rodding from trap to manholes to septic tank with iron rod, jute bags etc and well flushing with water mechanically or manually using with cleaning materials including manholes and removing of waste material to out of defence land complete all as specified and directed. Note :- The cost of cleaning material and and earth work for pits is deemed to be included in the unit rate of this item.

M&L for cleaning of blocked floor traps up to 100mm dia pouring hot water, rodding from trap to manholes to septic tank with iron rod, jute bags etc and well flushing with water mechanically or manually using with cleaning materials including manholes and removing of waste material to distance not exc 50m and burrying in pits complete all as specified and directed. Note :- The cost of cleaning material and and earth work for pits is deemed to be included in the unit rate of this item.

M&L for cleaning of blockage manually by rodding from water closets (IWC/EWC), pouring hot water, rodding from trap to manholes to septic tank with iron rod, jute bags etc and well flushing with water mechanically or manually using with cleaning materials including manholes and removing of waste material to a distance of not exc 50m and burying in pits complete all as specified and directed. Notes: (a) The cost for excavation and earth work for pits is deemed to be included in the unit rate of this item. (b) The complaint shall be cleared with in 24 hrs after intimation to contractor. If not rectified, then recovery at double the rate quoted against this item shall be levied on contractor's dues.

Desludging/cleaning including dewatering of septic tank/ soak well/ manholes of any dia and depth for liquid and slurry material and removing the sludge from the tank by mechanical using hydraulic operated high pressure suction cum jetting sewer cleaning machine having jetting tank capacity of minimum 5000 ltr and suction tank capacity of 300 ltrs and 260 LPM with minimum 145 bar suction flow of 10200 LPM including skilled driver and operator and supervising Engineer including provision of water for jetting and removal of sludge/silt/liquid/mud and sand (in foul position) etc complete all as specified and directed by Engr-in-Charge including loading, unloading digging out pit of any size in any type of soil, scouring sludge/silt/spoil/mud etc into the pit and spraying bleaching powder over the entire surface complete. Note:- (a) The service provider/contractor during the mechanized operation shall be equipped with gas monitor, nylon rope ladder, torch light and compressor blower etc along with the sewage cleaning truck mounted suction/jetting machine. (b) The cleaning shall be carried out with mechanised operation by means of jetting machines and the sludge sucked out with super succer machine of required capacity and sent to storage tanks for further disposal to the authorised disposal site. (c) Manual cleaning operation/scavenging is prohibited. (d) The unit rate shall deem to include for all materials, labour of skilled/unskilled, tools and plants and requisite quantity of water for the entire operation and transportation arrangements. (e) The measurement shall be included with depth of water and sludge/silt/mud. Responsibility of Bidder :- (i) The successful bidder should be liaise with Leh, Municipal authority and shall take written permission for disposal of faecal sludge/soil. No extra cost will be provided for same. OR Bidder must have own/ lease, land /plot register from UT Leh, and obtain permission / NOC from Leh, Municipal authority for disposal of faecal sludge/soil at his land. Same shall be submitted to the department before start the work. No extra cost will be provided for same.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and foRming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l (using 20 mm graded stone aggregate) smooth finished, and reforming benching as required for 100mm bore pipes, complete all as specified and directed by Engr-in-Charge.

S&F 75mm bore PVC (SWR) pipe bends complete all as specified and directed by Engr-in-Charge.

S&F PVC reducer of 110mm dia complete all as specified and directed by Engr-in-Charge.

S&F PVC reducer of 75mm dia complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) single junction (Single T) of 110mm dia complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) single junction (Single T) of 75mm dia complete all as specified and directed by Engr-in-Charge.

S&F 110mm dia bore PVC pipes single socketed having compressive strength 655 - 675 Kg/Cm2 , in any length with rubber ring joints, laid in trenches or in floors including PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) bed to drain including dismantling of cast iron/ PVC or reinforced concrete pipes jointed in cement mortar and taking out of trenches if reqd of any dia complete all as specified and directed by Engr-in-Charge.

S&F 75mm bore PVC (SWR) pipe single socketed having compressive strength 655 - 675 Kg/Cm2 , in any length with rubber joints fixed to walls including dismantling complete all as specified and directed by Engr-in-Charge.

S&F 110mm bore PVC (SWR) pipe single socketed having compressive strength 655 - 675 Kg/Cm2, in any length with rubber joints fixed to walls including dismantling complete all as specified and directed by Engr-in-Charge.

M&L for replacement of PP-R pipes PN 20/ SDR 11, 3 layer 50 mm dia bore with all fittings conforming to IS- 15801 and fixed complete to walls and ceiling or laid in floors or trenches and making good all disturbed surfaces with existing surface complete all as specified and directed by Engr-in-Charge.

M&L for replacement of PP-R pipes PN 20/ SDR 11, 3 layer 25 mm dia bore with all fittings conforming to IS- 15801 and fixed complete to walls and ceiling or laid in floors or trenches and making good all disturbed surfaces with existing surface complete all as specifed and directed by Enginee-n-Charge.

Supply only sockets compatible to fit existing MS pipe of sie 50 mm dia.

Supply and fix in replacement adaptor of size 25mm dia complete all as specified and directed by Engr-in-Charge.

Supply fix in replacement gate valve with NRV complete all as specified and directed by Engr-in-Charge.

Material and labour for rewinding of electric motor 3 phase 415 volts of capacity 7.5 HP with superior quality super enamelled copper winding wire of appropriate size and gauge as existing including varnishing, cotton tape, PVC sleeves etc, complete all as specified and directed by Engr-in-Charge.

Material and labour for necessary welding work making connection of sockets in existing MS pipe complete all as specified and directed by Engr-in-Charge.

T&P along with Labour only for servicing of FCU by skilled staff, checking the serviceability of fan coil unit of any capacity for having continuous serviceability of FCU including replacement of minor spare part like Gasket, teflon tape, flare nut, tightening of any loose glycol line connections, shifting FCU from one place to another place if required, heating up the freeze glycol line anywhere about the premises to have continuous flow of glycol fluid, repairing the insulation of pipe line of any size by providing shallow tape / GI wire as deemed fit, for fastening the insulation with pipe line, stopping any kind of leakage from any size of pipe line, tightening the loose electrical connections as related with FCU/ Heating system, cleaning the air filter including radiator of FCU to the entire satisfaction of Engineer-in- Charge all as directed at site (one skilled and one helper to carry out appropriate repair as desired by user at site shall be employed by the contractor).

Taking down old unserviceable fuel pump and supply and fix, install, testing and commissioning fuel pump and motor of capacity 1 HP single phase 215 Volts complete all as specified and directed by Engr-in-Charge.

Taking down old broken fuel pipe and supply and fix fuel pipe complete all as specified and directed by Engr-in-Charge.

S&F in replacement of gun metal butter fly control valves of 100mm bore as per existing, complete all as specified and directed by Engr-in-Charge.

Supply only flange committable for butterfly valve of size 100mm dia complete all as specified and directed by Engr-in-Charge.

Supply and filling Mono Ethylene Glycol MEG 99.99 % Pure clear, minus forty degree centigrade freezing Temperature & colourless in sealed containers having Specific gravity 1.1151-1.1156 at 20 Deg C with Dietylene Glycol DEG Contents less than .04% by weight, with minimal or zero Chlorides, Iron, Sulphates & Ash and Acidity less than 10 PPM and water content .0.0104 to 0.04 % with complete miscibility with water, for CHS at MAP and misc. works under AGE E/M-I. Make : Indian Glycol Limited/ Reliance Industries/IOCL Note: (a) Test report from BIS certified Lab and Gas Chromatography shall be submitted by the contractor for each lot of supply. (b) In addition, Contractor shall make arrangements to check the specific gravity of Glycol at site in the presence of Engr-in-Charge for each lot of supply. (c) Necessary documents shall be maintained for the above tests duly signed by Contractor and Engr-in-Charge.

Dismantling of burner assembly at DAD Complex and removing of side cover and repairing the same by removing the old burnt fire refractory cement plastering, replastering the same as per existing with fire refractory cement for boiler capacity 6 lakh kilo/cal/hr and complete servicing the boiler by removing the complete carbon/oil deposits with suitable coil shine chemical including repair to coil assembly by welding if there is any leakage found or any other repair required at site and reassembling/ testing the same, complete all as specified and directed by Engr-in Charge.

Supply only sequence controller suitable for 6 lakh kilo/hr with burner rod assembly, complete all as specified and directed. Make- Siemens

Supply only temp controller digital type DTC 503 with sensor suitable for 6 lakh kilo/Cal/hr LAL 2.25 burner rod assembly, complete all as specified and directed.

M&L for insulation of MS Pipe with PUF slab 40mm thick with and including applying bituminous compound and GI cladding with 26 gauge GI sheet complete of size 50mm dia pipe complete all as specified and directed by Engineer-in-Charge.

All as per Ser item No 100 above, but for MS pipe of size 25 mm.

Material and labour for welding work to rectify leakage of glycol of pipe size up to 100mm complete all as specified and directed by Engineer-in-Charge.

Material and labour for checking, Inspection, maintenance and servicing of DG set capacity 250 KVA complete including replacement of unserviceable spare parts of the DG set (comprising of Engine/ Alternator/ Control panel) of the following capacity for smooth functioning complete all as per manufacturers instructions and all as directed by Engineer-in-Charge. A.(a) Checking of lubricating oil condition (b) Checking engine for oil, water leakage and correcting the same (c) Checking of all the nut bolts of engine and alternator (d) Checking of all belts and adjust the tension properly (e) Cleaning of air filters (f) Checking and readjusting the valve clearance (g) Change of Oil/ Fuel filters and engine oil if necessary (h) Checking of starter motor battery and charger (i) Checking of cooling system and fuel system (j) checking of all power cables and AVR connections and mounting bolt tightness of alternator (k) checking the function of AVR general checks (l) Checking of control panel meters and gadgets function (m) Checking of all control and safety wirings. B. (a) Checking of flexible coupling of engine and alternator (b) Cleaning of crank case ventilation pipe (c) Checking of injectors and fuel pump (d) Checking of alternator and carbon brushes complete all as specified and directed. Note : (i) Cost of Spares required will be paid and measured separately. (ii) Servicing/routine check up carried out through authorised service centre of manufacturer. (iii) Make of spare recommendation by auth service centre of manufacturer.

S & F in replacement of Turbo charger suitable for 250 KVA DG set CP No 105292000069.

M & L for changing/ topping up of best quality of engine oil 20W40 type for various type/ capacity DG sets including removing of old burnt engine oil from DG Sets complete all as specified and/or as directed by Engr-in-Charge.

Replacement of Oil filter element as per existing for DG set of capacity 250 KVA complete all as specified and/or as directed by Engr-in-Charge. Make : Kirloskar/Cummins/Greaves.

Replacement of Air cleaner element (inner and outer) suitable for DG set of capacity 250 KVA complete all as specified and/or as directed by Engr-in-Charge. Make : Kirloskar/Cummins/Greaves

Replacement of Fuel filter elements (primary & secondary) for DG Sets complete all as specified and/or as directed by Engr-in-Charge. Make : Kirloskar/Cummins/Greaves

Supply and fix in replacement of 'V' belt for water pump suitable for capacity of DG 180KVA Sets complete all as specified and/or as directed by Engr-in-Charge. Make : Kirloskar/Cummins/Greaves

Supply and fix in replacement of fuel pipe with banjo bolt at both side suitable for DG sets complete all as specified and/or as directed by Engr-in-Charge. Make: Kirloskar/Cummins/Greaves

S&F in replacement of battery 12V 180 AH heavy duty and maintenance free complete all as specified and/or as directed by Engr-in-Charge.

S&F in replacement of self starter assy 24 Volts complete for DG set 250 KVA complete all as specified and/or as directed by Engr-in-Charge. Make : Greaves or equivalent approved make as approved by GE.

M&L cleaning of radiator using K oil and radiator cleaning solution hydraulic acid by pressure of pump and brush and necessary welding whichever is required complete all as specified and/or as directed by Engr-in-Charge.

M&L for replacement of automatic voltage regulator of DG set capacity 250 KVA complete all as specified and/or as directed by Engr-in-Charge.

M&L for replacement of fuel pipe with banjo bolt at both side suitable for DG set of capacity 250 KVA complete all as specified and/or as directed by Engr-in-Charge.

M&L for replacement of Dynamo Assy for DG Set of capacity 250 KVA complete all as specified and/or as directed by Engr-in-Charge.

M&L for replacement of water pump assembly for DG set of capacity 250 KVA complete all as specified and/or as directed by Engr-in-Charge.

M&L for replacement of 'V' belt for water pump suitable for DG Sets of capacity 250 KVA complete all as specified and/or as directed by Engr-in-Charge.

M&L for replacement of Fan Hub assembly for DG set of capacity 250 KVA complete all as specified and/or as directed by Engr-in-Charge.

Supply and fix in replacement of lub oil pump suitable DG set of capacity 250 KVA complete all as specified and/or as directed by Engr-in-Charge.

Supply and Replacement of thermostat valve suitable for DG set of capacity 250 KVA complete all as specified and/or as directed by Engr-in-Charge.

M &L for Removing the fuel injection pump (FIP) & injectors from DG sets and carry out servicing and calibration including replacement of injectors nozzles, etc. and refitting the same for smooth and efficient functioning complete all as specified and/or as directed by Engr-in-Charge. Note :-Repairs will be carried out from authorised workshop of MICO or manufacturer of DG set of capacity 250 KVA complete all as specified and/or as directed by Engr-in-Charge.

Supply and fix Offload Changeover Switch- AC 21 (side handle) in sheet enclosure, 415V AC, 50 Hz, of capacity 200 AMP, TPN complete all as specified and/or as directed by Engr-in-Charge.

Supply and fix digital Ammeter (0-800 Amp) capacity.

Supply and fix Digital Voltmeter (0-500 Volt) capacity.

Supply and fix of Air pipe (Turbo to Radiator) for any capacity of DG Set complete all as specified and/or as directed by Engr-in-Charge.

Supply and fix battery cable assy. with copper conductor multistranded RED and BLACK colour 2mtr long 21sqmm for connection to self starter unit to Battery unit complete all as specified and/or as directed by Engr-in-Charge.

Dismantling storage type water heater, vertical type, 25 Ltrs capacity taking out all unserviceable/ defective parts & supply and fix in replacement, inner tank with single weld line design, outer tank, high density PUF insulation, thermostat, assembly, safety valve, NRV, heating element 2.0 Kilowatts operating voltage 220-240 volts, indicating lamp(Red, Green), Plug top, Hot/ Cold water pipes including wiring work, all other accessories required, painting and refixing & testing the same complete all as specified and/or as directed by Engr-in-Charge.

S&F in replacement of heating elements 2.0 KW suitable for water storage heater vertical/ horizontal type complete all as specified and/or as directed by Engr-in-Charge.

Supply and fix LED down light (round, cool white) of capacity 15 Watt, motion sensing based with 4.5 mtrs radius, 215 Volts complete all as specified and/or as directed by Engr-in-Charge.

Supply and fix in replacement LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and/or as directed by Engr-in-Charge.

Supply & topping up of best quality anti freezing, Inhabitor Corrosion (Coolant ) liquid for DG set at various capacity and locations complete all as specified and/or as directed by Engr-in-Charge. Make : Castrol/Veedol/Volvoline

Taking down carefully copper/aluminium point wiring (light, fan, socket and power point) complete fittings such as switches, ceiling rose, regulators, socket etc and removing material from site and making good disturbed surfaces of walls, floors/ceiling to match the existing surface all as spfd and directed by Engr-in-Charge.

Point wiring complete with 1.5 Sqmm nominal area of copper conductor multi stranded PVC insulated and unsheathed 1100 volts cable drawn through & including PVC Casing & caping with standard accessories such as elbows, tees, junctions etc. and PVC moulded terminal box with top cover of including PVC insulated unsheathed solid 1.5Sqmm copper conductor cable as continuous earth lead all as specified and directed for the following:-

One light/exhaust fan point controlled by one way switch.

One switch socket outlet 6 Amps, 230 volts point on same board.

One switch socket outlet 6 Amps, 230 volts point on independent board.

All as serial item No 134 above, but using cables 4 Sqmm size.

Supply and fix modular switch piano flush button single pole 6 Amps 230 volts one way combined 1 module complete all as specified and directed.

Supply and fix modular switch Socket outlet two in one 5 pin 6 Amps flush type, 230 volts combined 2 module complete all as specified and directed.

Supply and fix modular switch Socket combination outlet multi purpose 5 pin 6 Amps and 16Amps 230 volts combined 2 module complete all as specified and directed.

Supply and fix modular switch piano flush button single pole 16 Amps 230 volts one way combined 1 module complete all as specified and directed.

Supply and fix plastic surface box 3 module with press plate and frame complete all as specified and directed.

Supply and fix plastic surface box 4 module with press plate and frame complete all as specified and directed.

Supply and fix plastic surface box 6 module with press plate and frame complete all as specified and directed.

Supply and fix plastic surface box 8 module with press plate and frame complete all as specified and directed.

Supply and fix plastic surface box 12 module with press plate and frame complete all as specified and directed.

Supply and fix in replacement of sheet metal enclosure for DBs double door when MCB's to be used single pole & neutral 240 Volts 12 Ways all as specified and directed by Engr-in-Charge.

Supply and fix MCB SPN 63 Amp 240 Volts AC ISI marked all as specified and directed by Engr-in-Charge.

Supply and fix MCB SP 6-32 Amps. 240 Volts 50 HZ complete all as directed.

Supply and fix Ceiling rose, surface Bakelite three terminals complete all as directed.

M & L for submain wiring along with earth wire with the following sizes of FRLSH insulated copper conductor, single core cable in surface/recessed as required in PVC casing Caping wire size 2x 6.0 sq. mm + 1x 6.0 sq. mm earth wire complete all as specified and directed by Engineer-in-Charge.

M & L for submain wiring along with earth wire with the following sizes of FRLSH insulated copper conductor, single core cable in surface/recessed as required in PVC casing Caping wire size 2x 2.5 sq. mm + 1x2.5 sq. mm earth wire including taking down existing wiring complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement LED light fitting 1X20 W, 220 V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Make-Havells /Crompton/ Bajaj

Supply and fix in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

Supply and fix in replacement exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and/or as directed by Engr-in-Charge.

Supply and fix in replacement of surface mounted square 2x2 LED panel 36 Watt, light with high quality diffuser for uniform light IP 20 protection complete all as specified and/or as directed by Engr-in-Charge.

Taking down old u/s wall recessed light and supply and fix environmental friendly, new generation, energy saving, decorative rectangular shaped wall recessed luminaire with SMD as light source complete all as specified and/or as directed by Engr-in-Charge.

Supply, fix, connecting and testing in replacement for post top lantern LED type 30 W IP65 protection new generation, inclusive of copper wiring of size 1.5 sqmm 3 core of length 1.5 meter along with PVAC conduit 20mm dia, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source ordering code complete all as specified and/or directed.

Please Enable Macros to View BoQ information