Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.0 LAdmitted-Finance SCHEME NO 07 BLOCK NO 22 FLAT NO 03 NEW GURDASPUR DISTT GURDASPUR PB 143521 | GURDASPUR | PUNJAB | 143521 | L1 | Admitted-Finance | |
| 2 | L2₹27.0 L+₹4.0 L (17.5%)Admitted-Finance | L2 | Admitted-Finance | |
| 3 | L3₹27.9 L+₹4.9 L (21.5%)Admitted-Finance | L3 | Admitted-Finance | |
| 4 | L4₹29.0 L+₹6.0 L (26.2%)Admitted-Finance | L4 | Admitted-Finance | |
| 5 | L5₹29.4 L+₹6.4 L (27.8%)Admitted-Finance | L5 | Admitted-Finance |
| Sl No | Description | Qty | Unit | Rishi Construction Co L2 | TARA ENTERPRISES L8 | MUKTI ENTERPRISES L6 | J S S BUILDERS & ENGINEERS L5 | Bharat Builder L3 | HARPAL ENGINEERS AND BUILDERS L1 | M/s. Aggarwal Engineers L4 | M/s Shiv Electrical & Mechanical Works L7 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00Material and labour for Comprehensive maintenance of D.G set (Make : Kirloskar/Mahindra/Crompton Greaves )periodical servicing including first hand repairs as required consisting of normal repair such as tightening of nuts, bolts, greasing, checking levelling of distilled water / oil / coolant etc. and cleaning of main battery charging alternator where ever exists including checking and taking out defective /worn out parts complete all as specified and directed for the following capacity D G Set :- NoteS :- (i) Spare parts required to be replaced shall be measured & paid for separately under relevant items of scheduled 'A' and taking out old unserviceable parts shall be deemed to be included in the qouted rate of this item . | |||||||||||
| 2.00 | (i) 250 KVA | 9 | Each Job | 1,500 ₹13,500 | 1,000 ₹9,000 | 2,300 ₹20,700 | 1,500 ₹13,500 | 2,500 ₹22,500 | 1,000 ₹9,000 | 350 ₹3,150 Lowest | 1,700 ₹15,300 |
| 3.00 | (ii) 160 KVA | 27 | Each Job | 1,300 ₹35,100 | 800 ₹21,600 | 1,345 ₹36,315 | 1,200 ₹32,400 | 2,000 ₹54,000 | 800 ₹21,600 | 350 ₹9,450 Lowest | 1,100 ₹29,700 |
| 4.00 | (iii) 100 KVA/125 KVA | 36 | Each Job | 1,100 ₹39,600 | 800 ₹28,800 | 1,245 ₹44,820 | 1,000 ₹36,000 | 2,500 ₹90,000 | 700 ₹25,200 | 350 ₹12,600 Lowest | 1,000 ₹36,000 |
| 5.00 | (iv) 62.5 KVA/ 63 KVA | 63 | Each Job | 1,000 ₹63,000 | 800 ₹50,400 | 1,555 ₹97,965 | 900 ₹56,700 | 2,000 ₹1,26,000 | 600 ₹37,800 | 350 ₹22,050 Lowest | 950 ₹59,850 |
| 6.00 | (v) 35 KVA | 9 | Each Job | 800 ₹7,200 | 800 ₹7,200 | 1,980 ₹17,820 | 600 ₹5,400 | 1,500 ₹13,500 | 600 ₹5,400 | 300 ₹2,700 Lowest | 700 ₹6,300 |
| 7.00 | (vi) 25 KVA | 18 | Each Job | 700 ₹12,600 | 800 ₹14,400 | 1,200 ₹21,600 | 500 ₹9,000 | 1,500 ₹27,000 | 600 ₹10,800 | 300 ₹5,400 Lowest | 600 ₹10,800 |
| 8.00 | (vii) 10 KVA | 9 | Each Job | 500 ₹4,500 | 800 ₹7,200 | 1,700 ₹15,300 | 500 ₹4,500 | 1,500 ₹13,500 | 500 ₹4,500 | 300 ₹2,700 Lowest | 550 ₹4,950 |
| 9.00 | (viii) 7.5 KVA | 9 | Each Job | 400 ₹3,600 | 600 ₹5,400 | 900 ₹8,100 | 300 ₹2,700 Lowest | 1,000 ₹9,000 | 400 ₹3,600 | 300 ₹2,700 Lowest | 300 ₹2,700 Lowest |
| 10.00Supply and fixing of Diesel filter with 'O' Ring suitable for following capacity of D. G. set as per existing sample complete all as specified and directed :-Make of DG Set: Kirloskar/Mahindra/Crompton Greaves. | |||||||||||
Tender Value
₹38.3 L
EMD Value
₹76,620
Closing Date
13 Jan 2026, 6:00 pmClosed
GE Amritsar
Garrison Engineer Amritsar cantt PIN 143001
REPAIR/MAINTENANCE OF DG SETS INCLUDING ATTENDING COMPLAINTS AND CONNECTED ITEMS AT GG FORT, VALLAH AT OLD AMRITSAR CANTT
2025_MES_724551_3
GE/ASR-41/2025-26
Open Tender
Civil Works
Works
180 days
GE Amritsar
Class D Category b i
8 documents required · 8 mandatory
₹500
GE Amritsar
₹76,620
6 Feb 2026
13 Dec 2025
21 Jan 2026
13 Dec 2025
13 Jan 2026
27 Dec 2025
13 Dec 2025 - 20 Dec 2025
Material & Labour for top Overhauling of DG set (Make of DG Set : Kirloskar/Mahindra/Crompton Greaves) complete and replacement of spare parts from OEM of capacity 25 KVA including dismanteling, reassembling , testing and commissioning complete all as specified and directed. Notes : (i) Spares parts required to be replaced shall be measured and paid for separately and taking out old unserviceable part shall be included in qouted rate. (ii) Spare parts required to be replaced in DG Sets shall be ascertain by the BOO to be detailed by the Accepting Officer before replaceing the items
(ii) 160 KVA
(iii) 100 KVA/125 KVA
(iv) 62.5 KVA/ 63 KVA
(vi) 25 KVA
(vii) 10 KVA
(viii) 7.5 KVA
Supply & fixing of set of belts suitable for following capacity D. G. sets as per existing sample complete all as specified and directed (Each set included dynamo belt, Fan belt and water pump belt) :-Make of DG Set : Kirloskar/Mahindra/Crompton Greaves
(ii) 160 KVA
(iii) 100 KVA/125 KVA
(iv) 62.5 KVA/ 63 KVA
(vi) 25 KVA
(vii) 10 KVA
(viii) 7.5 KVA
Supply and fixing of Air filter element suitable for following capacity of D. G. sets as per existing sample complete all as specified and directed :-
(ii) 160 KVA
(iii) 100 KVA/125 KVA
(iv) 62.5 KVA/ 63 KVA
(vi) 25 KVA
Supply and fixing of Diesel filter with 'O' Ring suitable for following capacity of D. G. set as per existing sample complete all as specified and directed :-Make of DG Set: Kirloskar/Mahindra/Crompton Greaves.
(ii) 160 KVA
(iii) 100 KVA/125 KVA
(iv) 62.5 KVA/ 63 KVA
(vi) 25 KVA
(vii) 10 KVA
(viii) 7.5 KVA
Material nd labour for replacement of unserviceable battery 12V, 100AH with maintenance free battery 12 Volt initially charged. Make Exide, Amron & Luminous
(ii) 160 KVA
(iii) 100 KVA/125 KVA
(iv) 62.5 KVA/ 63 KVA
(vi) 25 KVA
(vii) 10 KVA
(viii) 7.5 KVA
Supply and fixing of oil filter element with 'O' Ring suitable following capacity of D. G. sets as per existing sample complete all as specified and directed :-Make of DG Set : Kirloskar/Mahindra/Crompton Greaves
(ii) 160 KVA
(iii) 100 KVA/125 KVA
(iv) 62.5 KVA/ 63 KVA
(vi) 25 KVA
(vii) 10 KVA
(viii) 7.5 KVA
Taking down defective self-starter 12/24 Volt of D. G. set of capacity 100 KVA to 250 KVA installed at various installations including servicing, overhauling including replacing worn out parts like solenoid, bearing, carbon brush etc. , rewinding the starter motor and refixing the same after repairs for smooth functioning complete all as specified and directed.
All as per Srl. Item No. 53 but for D. G. Set of capacity 10 KVA to 63 KVA.
Supply and fixing of set of Rubber Hose for water & Air circuit suitable for following capacity D. G. sets complete all as specified and directed:-Make of DG Set : Kirloskar/Mahindra/Crompton Greaves.
(ii) 160 KVA
(iii) 100 KVA/125 KVA
(iv) 62.5 KVA/ 63 KVA
(vi) 25 KVA
(vii) 10 KVA
(viii) 7.5 KVA
Material and labour for scrapping, cleaing the existing paint completely and painting with two coats of anti corrosion synthetic enamal paint with spray painting gun of approved colour of following capacity D. G. sets (Internal & External) including fuel tank etc. ( Colour code as per existing colour) including removing all stricker/rediam and providing new strickre as per existing complete all as specified and directed :-
(ii) 160 KVA
(iii) 100 KVA/125 KVA
(iv) 62.5 KVA/ 63 KVA
(vi) 10 KVA
Material and labour for cleaning the fuel tank both internally & Externally by removing all the dust / sediments, etc. in cluding writing of tank capacity, Date of cleaning of following capacity D. G. Set complete all as specified and directed for following capacity :-
As per Item No. 71 but for D.G. Sets of capacity 35 to 63 KVA.
As per Item No. 71 but for D.G. Sets of capacity 7.5 to 25 KVA.
Material & Labour for top Overhauling of DG set (Make of DG Set : Kirloskar/Mahindra/Crompton Greaves) and replacement of spares part from OEM of capacity 63/62.5 KVA complete including dismentalling, reassembling, testing and commissioning complete all as specified and directed. Notes : (i) Spares parts required to be replaced shall measured and paid for separately and taking out old unserviceable parts shall be included in qouted rate. (ii) Spare parts required to be replaced in DG Sets shall be ascertain by the BOO to be detailed by the Accepting Officer before replaceing the items.
Material and labour for Comprehensive maintenance of D.G set (Make : Kirloskar/Mahindra/Crompton Greaves )periodical servicing including first hand repairs as required consisting of normal repair such as tightening of nuts, bolts, greasing, checking levelling of distilled water / oil / coolant etc. and cleaning of main battery charging alternator where ever exists including checking and taking out defective /worn out parts complete all as specified and directed for the following capacity D G Set :- NoteS :- (i) Spare parts required to be replaced shall be measured & paid for separately under relevant items of scheduled 'A' and taking out old unserviceable parts shall be deemed to be included in the qouted rate of this item . (ii) Spare parts required to be replaced in DG Sets shall be ascertain by the BOO to be detailed by the Accepting Officer before replaceing the items.
(i) 100 KVA to 250 KVA
(ii) 35 KVA to 63 KVA
(iii) 7.5 KVA to 25 KVA
Material & Labour for repair of turbo charge by replacing repair kit & fixing the same on D. G set 35 KVA to 250 KVA complete all as speciifed and directed.
Supply and fixing in repair water pump for D G Set of following capacities complete all as specified and directed :-
(c) 100 KVA/125KVA
(d ) 35 KVA to 63 KVA
(e) 7.5 KVA to 25 KVA
bracket made out of GI Pipe 40mm light grade-1.2Mtr long made to shape with fixing clamps of MS Flate 40x6m nuts bolts Complete all as specified and directed
Material & Labour for pouring of Egine Oil, 15W-40 complete all as specified and directed.
Material & Labour for pouring Coolant for Engine of DG Set complete all as speciifed and directed.
Material & Labour for pouring of Electrolyte of suitable spigravity for lead Acid batterries complete all as speciifed and directed.
Material & Labour for pouring of distiled water for battery complete all as speciifed and directed.
Supply and fixing fuel pipe steel braded with Benzo bolt & washer etc. of lenth 30 cm complete all as speciifed and directed.
Supply and fixing fuel pipe steel braded with Benzo bolt & washer etc. of lenth 60 cm complete all as speciifed and directed.
Supply and fixing fuel pipe steel braded with Benzo bolt & washer etc. of lenth 100 cm complete all as speciifed and directed.
Taking down the existing perished/damaged asbestos rope and supply & replace with new asbestos rope 10 mm thick on the exhaust pipe of any dia bore including covering complete all as speciifed and directed.
Material & Labour for removing the fuel injection pump from D. G. set of capacity 100 to 250 KVA and carrying out servicing & calibration from authorised service workshop including replaceement of injectors, Nozzles, etc. and refitting the same for smooth and efficient functioning complete all as specified and directed. Make of DG Set : Kirloskar
Supply & fix in replacement of automatic voltage regulator as per existing for 250 KVA D. G. set complete all as specified and directed.Make of DG Set : Kirloskar
Supply & fixing in replacement automatic voltage regulator as per existing for 100 to 125 KVA D. G. set complete all as specified and directed.Make of DG Set : Kirloskar
Supply & fixing in replacement automatic voltage regulator as per existing for 160 KVA D. G. set complete all as specified and directed.Make of DG Set : Kirloskar
Supply & fix in replacement of automatic voltage regulator as per existing for 25 to 63 KVA D. G. set complete all as specified and directed.Make of DG Set : Kirloskar
Supply & Fixing Engine water temp. meter complete all as specified and directed.
Supply & fixing in replacement digital ammeter 0 to 300 Amps complete all as speciifed and directed.
Supply & fixing in replacement digital Voltmeter 0 to 500 Amps complete all as speciifed and directed.
Kilogram
Supply & Fixing Engine Oil pressure gauge meter up to 7 kg complete all as specified and directed.
Supply and fixing battery leads set, PVC insulated multi stranded cooper 70 sq mm of 1.25 meter long each duly fixed with bran clamps complete all as speciifed and directed.Make of DG Set : Kirloskar
All as per item No above 105 but off load type, 200A side handle operated,including connected accssories complete all as specified and directed.
All as per item No above 105 but off load type, 250A side handle operated,including connected accssories complete all as specified and directed.
Material & Labour in replacement for stater switch of DG set of capacity 63 to 250 KVA as per existing complete all as speciifed and directed.
Material & Labour in replacement for Door Hinges of various capacity of DG Set complete all as specified and directed.
Material & Labour in replacement for Door lock of various capacity of DG Set as per existing at site of any capacity complete all as speciifed and directed.
Supply and fix in repairs change over switch existing panel, wall or LT pole of any size and any type off load type, triple pole and neutral, 100 Amps, 415 V, 50 Hz side handle operated, including connecting and testing complete all as speciifed and directed.Make : Havells, Indoasian, C&S.
Supply & Fixing in replacement of MCCB 250 Amps, three pole,25 KA complete all asspecified and directed.
Supply & Fixing in replacement of Indicator lamp of colour (red,yellow,green) of dg set panel of any capacity of DG set including all connecting circuits complete all as speciifed and directed.
Material and labour for disconnecting the radiator from engine frame and servicing, cleaning with acid and brazing where required to stop leaking tubes, joints etc. including cleaning fins and re-fixing the same and testing complete for following capacity DG Set complete all as speciifed and directed :- (Make of DG Set : Kirloskar/Mahindra/Crompton Greaves)
Supply & Fixing in repair change over switch on load complete compact type front operater handle from existing LT Panel TPN 630 Amp 415 Volts, 50Hz compacts including making electric connection all as specified and directed.
Notes for Srl Item Nos. 114 to 115
(a) Maintenance of crane required to be done in every month which includes cleaning, greasing, oiling as required, checking of all electrical connections and standard maintenance as recommended by manufacturer and the cost for the same shall be deemed to be included in the quoted rate.
(b ) Load test shall be carried out in the presence of Engr-in-Charge and users on every month after periodical maintenance and the cost for the same shall be deemed to be included in the quoted rate.
(c) Contractor shall attend day to day complaint of crane regularly and maintenance shall be carried out accordingly for smooth functioning and the cost for the same shall be deemed to be included in the quoted rate.
Material and labour for perodical maintenance brake down on call repairs of EOT Crane 2 Ton long travel motor, cross travel motor, gear box , control panel etc. installed at armoured static work shop and replacement of unserviceable spare parts at site complete all as specified and directed. (02 Nos) Note:- Rate includes for greesing, cleaning, oiling etc.
Supply & Fixing in replacement of contractor MNX 225 2 No + 2 NC ,3 pole power contractor current rating AC 3 :225 Amp,AC1 :300 Amp or as per existing at site of capacity of DG set 100 to 160 KVA complete all as speciifed and directed.Make : Havells, L&T, C&S.
(a) Wheel with pin shaft
(b) Ball bearing (Bearing No-6207)
(c ) MS Gear for wheel
(d) Steel wire rope multi stranded 10mm as per existing , Make Usha Martin.
(e ) PVC Coated & PVC Insulated copper conductor multistranded of size 10 sqmm 4 core.
(f) HRC fuse link 32 amps as per existing.
(g) Gear box Oil EP -230
(h) Brake Oil DOT4/3
(j) Brake Shoe of 150mm dia
(k) Magnetic Coil
(l) Limit switch 3 phase 415 volt 50 Hz as per existing.
(m) Four Pole Contactor Ac Three phase 415volt Amps as per existing.
(n)Copper Carbon brushes for clutch for microw movement of EOT Crane.
(o) Current collector complete as per existing for EOT Crane of different capacity of EOT Crane.
Material & Labour in replaceemnt for complete wiring of crane sliding panel and control panel using copper cable by using proper protective cover and necessary accessories of suitable size as per existing complete all as speciifed and directed.
Material & Labour for taking down Gearbox assembly of 2 ton to 5 ton capacity of Crane for long travel mechanism , short travel mechanism, updown mechanism , refixing the same after over hauling completely by replacing Gear oil C-600, Gasket set , bushing etc all as directed. Note: Gear Oil is paid separately and gasket set , bushing etc include the quoted rates.
Taking down and Material and labour for rewinding of electric motor 2HP/415and 5HP/415 volt by using SE Copper wire same gauge and same turns incl varnishing heating, balancing etc from short travel/ long travel mechanism and refixing the same by replacing bearing, varnishing etc complete all as specified and directed.
Material & L for repairing to long travel shaft by replacing pedstal bearing 06 Nos, including machining work replacing nut, bolts ,washers complete all as specified and directed. Note:- Rate of Pedastal Bearing is included in quated rate.
Material and Labour for repair to brake system completely by replacing brake shoe , rotor , brake liner , spring for long travel, short travel, updown mechanism complete all as specified and directed. Note:- Break shoes is measured and Paid Separately
Material and labour for repairs to guide wheel 4 Nos for long Travels by replacing gun metal filling , reboring and machine work with in tolerance limit all as specified and directed.
Material & Labour for periodical maint of Voltage stabilizer / UPS of capacity upto 100 KVA once in three months which includes the following works complete all as speciifed and directed :- (i) Checking of SVS working in auto mode, (ii) Checking of battery terminals and clean, (iii) Checking of input and output connection, (iv) Checking of Battery voltage, (v) Checking of control card, (vi) Checking of Driver card, (vii) Checking of IGBT, (viii) Checking of charger card.
Material & Labour for Overhauling of voltage stabilizer complete & replacement spares parts as per Existing as recommanded by OEM of capacity 15 KVA including dismentalling, taking out of unservicable spare parts and reassembling after necessary repairs including testing and commissioning complete all as specified and directed. Note : Spares parts required to be replaced shall measured and paid for separately.
(a) Supply & Fixing in replacement of Varic 40 Amps,single phase , 3 nos as per existing complete all as speciifed and directed.
(b) Supply & Fixing in replacement of Buck boost 100 Amps ,single phase for charging 12/24V service battery complete all as speciifed and directed.
Material & Labour in replacement for following spare parts as per existing suitable for EOT Crane of capacity of 2.0 ton to 5 Ton complete all as speciifed and directed 25-11-2025 :-
(d) Supply & Fixing in replacement of control card for 100 KVA voltage stabiliser as per existing complete all as speciifed and directed.
(e)Supply & Fixing in replacement of contractor for 100 KVA stabiliser of existing capacity complete all as speciifed and directed.
(f) Supply & Fixing in gear assembly for 100 KVA stabilizer as per existing complete all as speciifed and directed.
(c) Supply & Fixing in replacement of Motors as per existing AC synchronous servo motor,RPM 60.for construction of voltage as per existing complete all as speciifed and directed.
(a) Supply & Fixing in repair Varic 8/12 Amps,single phase , 3 nos as per existing complete all as speciifed and directed.
(b) Supply & Fixing in repair Buck boost 40 Amps ,single phase for charging 12/24V service battery complete all as speciifed and directed.
(c) Supply & Fixing in replacement of Motor 3 kg /cm AC synchronous servo motor.for construction of voltage as per existing complete all as speciifed and directed.
(e)Supply & Fixing in replacement of contractor for 15 KVA stabiliser of existing capacity complete all as speciifed and directed.
(f) Supply & Fixing in replacement gear assembly for 15 KVA stabilizer as per existing complete all as speciifed and directed.
Material & Labour for Overhauling of vol
(a) AMF Controller
(b) Contactor 4 Pole 415 Volt 225 Amp, Make: L&T/Seimens as per existing.
(c) Battery Charger 24 Volt 20 Amp.
(d ) Digital multifunctional meter for freq, Amp, Voltage, KWH.
(f) Voltage Monitoring relay.
tage stabilizer complete and replacement spares parts as per Existing as recommanded by OEM of capacity 100 KVA complete including dismentalling, reassembling, testing and commissioning complete all as specified and directed. Note : Spares parts required to be replaced will be measured and paid for separately.
Material & Labour for repair to AMF panel 160 KVA of D G Set by providing the following Parts complete all as speciifed and directed :- Make of DG Set Kirloskar.
Supply and fixing, in existing panel board, in replacement MCCB, 4 Pole, 63 Amps , with breaking capacity 16 KA , fixed type including spreaders and connecting accessories etc. complete all as specified and directed.
Supply and fixing, in existing panel board, in replacement of MCCB, 4 Pole, 100 Amps , with breaking capacity 25 KA , fixed type including spreaders of suitable size and connecting accessories etc complete all as specified and directed.
Material and labour for Shifting of DG set of any capacity from one place to another place within cantt area including dismentalling of existing connections carefully and lifting , transporting with the help of crane and necessary transport and reassembling at new place including reconnection same including testing complete all as specified and directed.
Material and labour for replacement of unserviceable battery 12 V, 150 AH with maintenance free battery 12 Volt initially charged complete all as speciifed and directed. Make Exide, Amron & Luminous
Material and labour for replacement of unserviceable battery 12 V, 180 AH with maintenance free battery 12 Volt initially charged complete all as speciifed and directed. Make Exide, Amron & Luminous
Material and labour for repir of Alternator of capacity 63 to 100 KVA DG set by transporting from site to to workshop and back to site after repair, refixing the same with proper alingment complete all as specifiedd and directed. (Rewinding and bearing shall be measured and paid for separately ) Make of DG Set : Kirloskar/Mahindra/Crompton Greaves
Supply and fixing brans battery terminal suitable for lead acid, battery 12 v any AH complete all as speciifed and directed.
(a) Supply & Fixing Cylinder liner Assly complete all as specified and directed.
(b) Supply & Fixing of Pistion + Ring Assly complete all as specified and directed.
(c) Supply & Fixing of Set of Joints complete allas specified and direcetd.
(e) Material & Labour for Lub Oil Cooler complete all as specified and directed.
(d) Supply & Fixing of Cylinder Head Gasket set of complete suitable for 25/40 KVA DG set complete all as specified and directed.
(f) Supply & Fixing of Con Rod Bearing complete all as specified and directed.
(g) Supply & Fixing of Main Bearing set complete all as specified and directed.
(h) Supply & Fixing of Lub oil pump complete all as specified and directed.
(k) Supply & Fixing of Oil seal set complete all as specified and directed.
(i) Supply & Fixing Cam Bush set complete all as specified and directed.
(j) Supply & Fixing of Cylinder Head including inlet & Ex Valve complete all as specified and directed.
(l) Supply & Fixing of Water pump Assly complete all as specified and directed
(m) Supply & Fixing of Chamber Gasket complete all as specified and directed.
Running metre
(n) Supply and fixing of Water pipe set all as specified and directed.
(a) Supply & Fixing Cylinder liner Assly complete all as specified and directed.
(b) Supply & Fixing of Pistion + Ring Assly complete all as specified and directed.
(a) Supply & Fixing of Cylinder liner Assly complete all as specified and directed.
(e) Material & Labour for Lub Oil Cooler complete all as specified and directed.
(d) Supply & Fixing of Cylinder Head Gasket set of complete suitable for 25/40 KVA DG set complete all as specified and directed.
(f) Supply & Fixing of Con Rod Bearing complete all as specified and directed.
(d) Supply & Fixing of Cylinder Head Gasket set of complete suitable for 63 KVA DG set complete all as specified and directed.
(h) Supply & Fixing of Lub oil pump complete all as specified and directed.
(i) Supply & Fixing of Cam Bush set complete all as specified and directed.
(i) Supply & Fixing Cam Bush set complete all as specified and directed.
(j) Supply & Fixing of Cylinder Head with inlet & Ex Valve complete all as specified and directed.
(l) Supply & Fixing of Water pump Assly complete all as specified and directed
(l) Supply & Fixing of Water pump Assly complete all as specified and directed.
Material & Labour for reparing of Starter including rewinding of armature and replacement of field coil, commutator including carbun brush and overhauling complete all as specified and directed.
Material & Labour for reparing of Alternator of existing capacity DG set including regulator, rectifier, rotor slip, rings and end bearing stator winding, drive end bearing and pully complete all as specifiedd and directed.
Supply and fixing in replacement of Solenoid switch as per existing for D G Set of capacity 63 KVA to 100 KVA complete as per manufacturer instruction including necessary connections, fittings, fixtures etc. complete all as speified and directed .Make of DG Set : Kirloskar/Mahindra/Crompton Greaves
(n) Supply and fixing of Water pipe set all as specified and directed.
(a) Material and labour for Rewinding of Main Stater complete all as specifiedd and directed.
(b) Material and labour for Rewinding of Main Roter complete all as specifiedd and directed.
(c) Material and labour for Rewinding of Auxillary stater complete all as specifiedd and directed.
(d) Material and labour for Rewinding of Auxillary Roter complete all as specifiedd and directed.
(e) Supply and fixing of Bearing 2 Nos complete all as specifiedd and directed.
(n) Supply and fixing of Water pipe set all as specified and directed.
(a) Material and labour for Rewinding of Main Stater complete all as specifiedd and directed.
(b) Material and labour for Rewinding of Main Roter complete all as specifiedd and directed.
(c) Material and labour for Rewinding of Auxillary stater complete all as specifiedd and directed.
Material and labour for repir of Alternator of capacity 160 KVA DG set by transporting from site to to workshop and back to site after repair, refixing the same with proper alingment complete all as specifiedd and directed. (Rewinding and bearing shall be measured and paid for separately )
Supply and fixing in replacement of Solenoid switch as per existing for D G set of capacity 125KVA to 250 KVA with complete as per manufacturer instruction including necessary connections, fittings, fixtures etc. complete all as speified and directed.Make of DG Set : Kirloskar/Mahindra/Crompton Greaves
(n) Supply and fixing of Water pipe set all as specified and directed.
(a) Material and labour for Rewinding of Main Stater complete all as specifiedd and directed.
(b) Material and labour for Rewinding of Main Roter complete all as specifiedd and directed.
(c) Material and labour for Rewinding of Auxillary stater complete all as specifiedd and directed.
(d) Material and labour for Rewinding of Auxillary Roter complete all as specifiedd and directed.
(e) Supply and fixing Bearing 2 Nos complete all as specifiedd and directed.
Supply and fixing Air filter housing for DG set of capacity upto 100 kva to 250 KVA including all fixing asseccories and connected items complete all as specified and directed.
Supply and fixing in replacement AUTOMATIC MAINS FAILURE (AMF) CONTROL PANEL (Double contactor) suitable for 160KVA DG set of any make. The Control Panel will be free standing, floor mounting, cubical type, front operated dust and vermin proof, fabricated out of 14 SWG MS CRCA Sheet duly powder after necessary pre-treatment process & consisting of following complete all as specified and directed :- (i) Power Circuit :- for Mains and DG Set- 4P contactor heavy duty suitably rated- 02 Nos each for main and DG supply. (ii) 3P MCCB suitably rated 02 Nos-one each for Mains and DG supply. (iii) Control & Metering Circuit-1 No. KOEL Green EMS Microprocessor based AMF logic controller-1 No. (iv) MF meter- 1 No. (v) Line Voltage Monitor L&T make- 1 No. (vi) Set of Control Fuses 1 No. (vii) Static Battery charger circuit with on/off switch. Battery charger "ON" indication (viii) Reverse Polarity indication-1 No. (ix) DC battery charging ammeter-01No. complete all as specified and directed. .
Material and labour in repair for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick, buried vertically in ground (Each pit not less than 2.25 mtrs deep below normal ground level with top edge of plate not less than 1.50 M below normal ground level) connected to GI strip 32 x 6 mm, by means of bolts, nuts, and check nuts and washers etc encased in Gl protection pipe 40 mm dia light grade pipe for protection of Gl earth strip both to be provided to the extet of 7.5 meters, all as shown on electrical plate No 3 of MES SSR - 2004 Part - I, GI protection pipe buried in ground, laid under floors / plinths or mixed on walls / pole etc or concealed in walls etc; with provision of mixture of charcoal dust and common salt packed upto minimum 150 mm all around the earth plate, including PCC 1:2:4 type B-1 earth pit with M.S angle iron frame, cast iron cover with locking arrangement, with GI 20 mm dia medium grade pipe and MS funnel with wire mesh for watering arrangement, including necessary excavation and earth work in any type of soil/strata and testing on completion; complete all as specified and directed. . Note:- i) Cost of Gl strip 32 x 6 mm and protection pipe 40 mm dia is deemmed to be included in rate quoted il) Excavation and earth work in any type of Soil is deemed to be included in the qouted rate.
Supply & Fixing in repair Autocut Electrical Battery Charger Unit SMPS with Constant Voltage Output with Battery Charging Transformer and Moulded Type Rectifier Unit etc. ( Make : Teknika/ NPP) complete all as specified and directed as under :-
(a) Battary Charger 12V DC, 10 Amp.
(b) Battary Charger 24V DC, 10 Amp.
Supply and fixing Air filter housing for DG set of capacity upto 100 kva including all fixing asseccories and connected items complete all as specified and directed.
Supply and fixing in replacement LED building light fitting powder coated pressure dia cast almimium compact high power LED light with heat resistant glass for 25 wat with IP66 protection and impact resistance of IK07 with 10 OV Built-in-Surge protection Device
Supply & Fixing in replacement 1100 volts grade heavy duty PVC cable insulated aluminium conductor served with inner sheating of PVC tape and over all PVCs sheathed in Service connection stranded conductor flat 6Sqmm 2core cable drawn in & including PVC conduit of suitable size 20mm dia complete all as specified and directed.
Supply and fixing in replacement of Garden light fitting as approved by Engr-in Charge complete with lamp holder and other accessories with LED Blub 9 Watt pin type complete with provn of MS pipe 50 mm dia 1.0 meter in length for mounting of Garden light including PCC (1:2:4) using 20mm grade for grouting the pipe with copper cable 1.5sqmm 2 core for making connection from PVC insulated cable to light fitting holder with provn of connection complete all as specified and directed.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.31 MB
TENDER41.pdf
Tender Documents • 2.26 MB
BOQ_833558.xls
BOQ • 1.60 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .