ELECTRICAL WORK

Amount

CORTAGE OF STOR ITEMS FROM ESC TRIPULA RAEBARELI TO DUMP SITE AND DUMP SITE TO WORK SITE ALONGWITH LOADING UNLOADING AND PROPER STACKING:-

11 Mtr long ST Pole.

8.5 Mtr long PCC Pole.

ACSR Weasal Conductor

11 KV XLPE Cable (3X120)sq.mm

3.5X70 sq.mm Armoured Cable

11 KV Disc Insulator

11 KV Disc Fitting

11 KV Pin Insulators

11 KV Pin with Nuss

Stay Set Complete

Earthing Complete

G.I. Wire 10 SWG

11 KV Outdoor CJ & Kit

LT ABC Cable (3X50)sq.mm

T-Off Channel

ERRECTION & LABOUR CHARGES:-

Dismantling of ST Pole then Errection of New ST Pole with Fitting of all related accessories as per RESPO Norms.

Dismantling of PCC Pole Then Errection of New PCC Pole with Fitting of all related accessories as per RESPO Norms.

Digging of ST Pole to pit side then Grouting of ST Pole with grouting materials as per RESPO Norms.

Digging of PCC Pole to pit side then Grouting of PCC Pole with grouting materials as per RESPO Norms.

The work for Earth excavation of new Plinth size 2.00X2.00X1.50 & size for making outer wall of Plinth by 1st class brick work in Cement mortar of ratio1:6 of filling earth in Plinth and providing Ston ballast and fixing 02 No.90 Iballs Rail pieces (6.9 Mtr) of proper distance and then plastering the top and all side of plinth wall with cement Corse and sand in ratio 1:4 and then proper spraying of water alongwith All materials & Labour for Shifting & Mounting of 250 KVA T/Fs on Plinth. ALL REQUIRED MATERIALS WILL BE PROVIDED BY CONTRACTOR TO OWN RESOURCES.

Work for Mounting & Shifting of existing 250 KVA Transformers on Plinth alongwith fitting of all acessories, As per RESPO norms. under EDD Unchahar , Raebareli.

Making/Errection/Installation/painting/gouting/welding/febrication/earthig work of Wirmesh Fancing of Jali alongwith Angle isn size of 35X35X5X2500 mm with Nut & Bolts, Washer, Earthing Rod & G.I. wire. Making of 01 No. Gate by M.S. Angle in size of 35X35X5X1000 mm with Nut & Bolts Washer, Earthing Rod & G.I. wire. One No. Gate of M/S Angle in size of 25X5 mm with wiremesh and each of the same. Grouting of M.S. Angle and other required Angles with Grouting materials as per RESPO Norms, ALL REQUIRED MATERIALS WILL BE PROVIDED BY CONTRACTOR TO OWN RESOURCES.

Earthing of 250 T/F 11/0.4 KV Power T/F completed for 60 ft. Borwell Type Pit( 1.5 " Dimeter) to install 60Ft. Long M.S. Pipe (60 fit Long) with 1.5 Diameter, work followed by Contractor of M.S. Strip 50X6 mm size for suitable lenth to G.I. Pipe through Proper building (Aluminium paint covering of welded Joint) with Tightening of nuts & Bolt and filling of spaces by homogeneous mixture of coke & sault against medium PowerTransformer body & Neutral earthing thes included connection of M.S. Strip to sapret common pit as there will be one pit of each earthing. ALL REQUIRED MATERIALS WILL BE PROVIDED BY CONTRACTOR TO OWN RESOURCES.

Making/Installation/Fixing of 11 kv Out Door CJ & Kit as per RESPO Norms.

Digging of Pits, fixing nozzling & grouting of Stay Rod inclucing fitting of all accessories with grouting materials as per RESSPO Norms

Making/Installation/Fixing of "T" OFF Channel.

Making/Installation/Fixing of Top Channel, Material Provided by Contractor

Making/Installation/Fixing of M.S. Angle 75X75X6X2028 mml, Material Provided by Contractor

Making/Installation/Fixing of M.S. Channel 100X50X2028 mml, Material Provided by Contractor

Making/Installation/Fixing of M.S. Channel 125X65X1300 mml, Material Provided by Contractor

Laying , stringing & sagging of HT Line by DOG/ACSR weasal / RABBITconductor including all associated work & making clearance of Road with Joint/jumpers & binding on insulators as required.

Laying , stringing & sagging of XLPE Cable with Supporting wire 10 SWG G.I. Wire, including all associated work & making clearance of Road with Joint/jumpers & binding on insulators as required.

Laying , stringing & sagging of Armoured Cable 3.5X70 sq.mm Cable including all associated work as required.

Laying , stringing & sagging of LT ABC Cable 3X50 sq.mm Cable including all associated work as required.

Earthing of ST/PCC Pole as per RESPO norms.

Making/Fixing/Installation of L.T.Clamp with Bolt Nuts, Material Provided by Contractor

Making/Fixing/Installation of 11 KV "V" Type X-Arms, Material Provided by Contractor

Making/Fixing/Installation of Holding Clamp, Material Provided by Contractor

Making/Fixing/Installation of "F" Bracket with Pin, Material Provided by Contractor

Making/Fixing/Installation of Clamp with Bolt Nuts, Material Provided by Contractor

Making/Fixing/Tightening of Nuts & Bolt, Material Provided by Contractor

Making/Fixing of Danger Board, Material Provided by Contractor

Making/Fixing of Stone Pad 300X300X75 mm, Material Provided by Contractor

M/S Shiv Traders

NATIONAL ENTERPRISES