Providing 11 KV HT and LT composite mains network at I.A. Orai Site-II, Jalaun.

Supply and erection of steel tubular pole 410-SP 55,11 Mtr long,227 Kg complete with 1/6th of overall length of pole below ground level with 45 cm dia cement concrete with 45cm dia cement plinth around the pole and 45cm above the ground level.The foundation of underground will not be less than 20 cm thick layer of cement concrete in the ratio of 1:3:6 (cement :coarse sand:over burnt brick ballast /stone ballast ).The brick ballast / stone ballast will be used of 1.25 cm size with stone pad of 30X30X7.5cm at the base. The cost includes all men and materials for proper completion of work. (It should be galvanised in first section as per technical specfications of DVVNL)

Supply and fixing of 11 KV originating/terminating pole fitting including all T&P,men and material for proper completion of work as per UPSIDC schedule no E03.01; [ (a) MS Channel 100x50mm (7.9 kg/mtr), 1.15 mtr=1 No., (b)Straight MS channel 75X40 mm, 2.24 mtr long = 1 No., (c) MS clamp made out of MS flat 50X6 mm including all bolts nuts washers=2 No.(d) Clamp for 11 kV Disc Fitting made out of MS flat 50X6mm including all bolts nuts washers = 1 No., (e)11KV Disc and fittings = 3 No.(f) Eye bolt 110X12 mm = 2 No.)] ( With recent specifications of DVVNL)

Supply and fixing of 11 KV ordinary pole fitting with guarding Channel 2.24M long instead of Z clamps including all T&P,men and material for proper completion of work as per UPSIDC schedule no E03.02 [ (a) Vshape MS chhanel 75X40 (6.8 kg/mtr) =1 No., (b) Straight MS channel 75X40 mm (7.5 kg/mtr), 2.24 mtr long =1 No., (c) MS clamp made out of MSflat 50X6 mm including all bolts nuts washers=2 No.(d) Top MS cap cum F clamp with 11kV Pin Insulator = 1 No. (e) 11 kV Pin with Insulator =2 No.(f) Eye bolt 110X12 mm = 2 No.)] ( With recent specifications of DVVNL) ]

Supply and fixing of 11 KV Disc fitting complete UPSIDC schedule no E03.08

Supply and fixing of 11KV pin insulator complete UPSIDC schedule no E03.07

Supply & erection of overhead line with ACSR conductor on poles / service bracket including binding etc.complete in all respects (UPPWD 2018-627)(For Dog Conductor Specifications as per DVVNL)

Supply, sagging ,tensioning , jointing and binding of ACSR Rabbit conductor including cost of aluminium tape binding wire and jointing sleeves complete in all respects including materiaI ,men an T&P for proper completion of work as per UPSIDC schedule No E10.10

Supply & fixing LT ordinary pole fitting suitable for single ckt three phase Six wire line in vertical configruration of two numbers 50x6 mm clamp of MS flate with two numbers 100x115 mm shackle insulator and one number 50x6mm M.S clamp for earth wire. UPSIDC Sch 13.2

Supply & sagging, tensioning, jointing, binding two parallel length of G.I.no.6 SWG wire along the span and G.I. no. 6 SWG wire across the span each at an interval of 5m for cross lacing complete as per direction of engineer-in-charge as per SIDC schedule E 12.01

Supply and sagging ,tensioning ,jointing ,and binding of GI wire no 6 SWG on ST POLE / Service bracket complete in all respect including all men and materialsT&P,require proper complition of work.